DMDaniela Cristina Manfroi

Daniela Cristina Manfroi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Daniela Cristina Manfroi has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Effect of Iron and Vanadium on the Phase Transition of Titanium Dioxide Obtained by Polymeric Precursor Method

    by Eduardo Felipe de Carli, Maycon dos Santos, Natali Amarante da Cruz, Daniela Cristina Manfroi, Jusinei Meireles Stropa, Lincoln Carlos Silva de Oliveira, Maria Aparecida Zaghete, Alberto Adriano Cavalheiro

    The titanium dioxide phase formation is dependent on the synthesis method, temperature of calcination and modifiers insertion. By using chemical methods, such as Polymeric Precursor Method, the organic impurities or extrinsic defects caused by doping play an important rule on the formation of precursor structure before the phase crystallization above 500 oC. Some dopants can change the decomposition mechanism of the precursor, which affects the anatase-rutile phase transition. In this work, the Polymeric Precursor Method was used to synthesize titanium dioxide powder samples in order to investigate the effects of iron (III) and vanadium (V) dopants on the phase formation. Through thermal analysis of polymeric precursors and X-ray diffractometry for calcined powder samples it was possible to show the existence of antagonistic effects for both investigated dopants. While the iron doping reduces the anatase phase tetragonality and delays the rutile phase conversion, the vanadium one changes the mechanism of decomposition of polymeric precursor and leads to more amount of rutile phase.

  • Photoluminescence in NaNbO3 particles and films

    by Guilhermina Ferreira Teixeira, Thiago Rago Wright, Daniela Cristina Manfroi, Elson Longo, José Arana Varela, Maria Aparecida Zaghete


  • Titanate nanotubes produced from microwave-assisted hydrothermal synthesis: Photocatalytic and structural properties

    by Daniela C. Manfroi, Ademir dos Anjos, Alberto A. Cavalheiro, Leinig A. Perazolli, José A. Varela, Maria A. Zaghete


  • Photocatalytic Decomposition of Rhodamine-B Using Scandium and Silver-Modified TiO2 Powders

    by Douglas Washington da Silva, Daniela Cristina Manfroi, Guilhermina Ferreira Teixeira, Leining Antônio Perazolli, Maria Aparecida Zaghete, Alberto Adriano Cavalheiro

    Semiconductor-mediated photocatalytic oxidation is an interesting method for water decontamination and a specially modified TiO2 is said to be a promising material. This study verified that the synthesis of 1wt%Ag modified-Sc0.01Ti0.99O1.995 powder samples prepared by Polymeric Precursor Method is capable of forming a mixture of anatase-rutile phase with high photocatalytic performance. This kind of material is found to have a lower bandgap compared to the TiO2-anatase commercial powders, which can be associated to an innovative hybrid modification. The simultaneous insertion of scandium in order to generate a p-type semiconductor and a metallic silver nanophase acting as an electron trapper demonstrated being capable of enhancing the degradation of rhodamine B compared to the commercial TiO2. In spite of the different thermal treatments or phase amounts, the hybrid modified powder samples showed higher photocatalytic activity than the commercial ones.


  • Effect of the Iron Doping on the Thermal Decomposition of the Polymeric Precursor for the Titanium Dioxide Powder Synthesis

    by Silvanice A. Lopes, Natali A. Cruz, Daniela C. Manfroi, Rafael Gomes Dias, Margarete S. Silva, Maria Aparecda Zaghete, Ademir dos Anjos, Alberto A. Cavalheiro, Lincoln C.S. Oliveira

    The Polymeric Precursor Method has proved suitable for synthesizing reactive powders using low temperatures of calcination, especially when compared with conventional methods. However, during the thermal decomposition of the polymeric precursor the combustion event can be releases an additional heat that raises the temperature of the sample in several tens of degrees Celsius above the set temperature of the oven. This event may be detrimental to some material types, such as the titanium dioxide semiconductor. This ceramic material has a phase transition at around 600 ° C, which involves the irreversible structural rearrangement, characterized by the phase transition from anatase to rutile TiO2 phase. The control of the calcination step then becomes very important because the efficiency of the photocatalyst is dependent on the amount of anatase phase in the material. Furthermore, use of dopant in the material aims to improve various properties, such as increasing the absorption of radiation and in the time of the excited state, shifting of the absorption edge to the visible region, and increasing of the thermal stability of anatase. In this work, samples of titanium dioxide were synthesized by the Polymeric Precursor Method in order to investigate the effect of Fe (III) doping on the calcination stages. Thermal analysis has demonstrated that the Fe (III) insertion at 1 mol% anticipates the organic decomposition, reducing the combustion event in the final calcination. Furthermore, FTIR-PAS, XRD and SEM results showed that organic matter amount was reduced in the Fe (III)-doped TiO2 sample, which reduced the rutile phase amount and increased the reactivity and crystallinity of the powder samples.