Dileepan Dhanasekaran
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dileepan Dhanasekaran has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Srinivasan Ashok Kumar
Rajalakshmi Institute of Technology, Chennai, India
4 shared publications - Thangavelu Shanmuganantham
Pondicherry University
4 shared publications - Sanmugasundaram Ravichandran
Department of Electro-Optics Engineering, National Formosa University, Yunlin 632, Taiwan
2 shared publications A. Selwin Mich Priyadharson
1 shared publicationAmol Borole
Qualex Systems Pvt Ltd., Pune, India
1 shared publicationB. Sai Raghav
Vel Tech Rangarajan Dr Sagunthala RD Institute of Science and Technology,Dept. of ECE,Chennai,Tamil Nadu,India
1 shared publication
Latest Publications
- Open Access
Parallel Processing of Sobel Edge Detection on FPGA: Enhancing Real-Time Image Analysis
Detection of object boundaries and significant features within an image is one of the most important processes in image processing and computer vision, as it allows the identification of object boundaries and significant features within an image. In applications such as autonomous vehicles, surveillance systems, and medical imaging, real-time processing has become increasingly important, which requires hardware accelerators. In this paper, the improved Sobel edge detection algorithm was implemented using Verilog as an FPGA-based algorithm designed to perform real-time image processing under the Sobel edge detection algorithm for specially RGB images. The proposed design proposes an application of horizontal and vertical Sobel kernels in parallel in order to compute the gradient magnitudes for 1028 × 720 RGB images by taking the gradient magnitudes of 3 × 3 pixel windows. This work focuses on algorithmic complex reduction by using eight directional approaches, and parallel processing leads to reducing the architectural utilization.
Open AccessParallel Processing of Sobel Edge Detection on FPGA: Enhancing Real-Time Image Analysis
Detection of object boundaries and significant features within an image is one of the most important processes in image processing and computer vision, as it allows the identification of object boundaries and significant features within an image. In applications such as autonomous vehicles, surveillance systems, and medical imaging, real-time processing has become increasingly important, which requires hardware accelerators. In this paper, the improved Sobel edge detection algorithm was implemented using Verilog as an FPGA-based algorithm designed to perform real-time image processing under the Sobel edge detection algorithm for specially RGB images. The proposed design proposes an application of horizontal and vertical Sobel kernels in parallel in order to compute the gradient magnitudes for 1028 × 720 RGB images by taking the gradient magnitudes of 3 × 3 pixel windows. This work focuses on algorithmic complex reduction by using eight directional approaches, and parallel processing leads to reducing the architectural utilization.
- 26 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
An FSS Based Dual-band Bandstop Filter for Minimizing Interference in C Band Satellite Downlink Communication
Over the decades, C-band frequencies have gained popularity in various wireless systems including mobile, radar, and satellite communications. However, this frequency band suffers from substantial interference due to sharing of its spectrum with Broadband Wireless Access networks and several operational VSATs. This paper presents a dual-band bandstop filter implemented using frequency selective surface (FSS) for minimizing interference in the C band downlink satellite system. The dual-band FSS unit cell is designed using a circular ring with rectangular slots on the top layer and a Swastika symbol at the bottom, which has a dimension of 0.32λ 0 ×0.32λ 0 (free space wavelength at 6 GHz). The performances of the proposed filter in terms of transmission coefficients, reflection coefficients, surface current distribution, and angular stability are analyzed. The results demonstrate that the filter resonates at two distinct frequencies of 5 GHz and 7.2 GHz within the C band. It is revealed that the dual-band filter exhibits angular stability up to 30° in both TE and TM mode polarizations.
- 26 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
An FSS Based Dual-band Bandstop Filter for Minimizing Interference in C Band Satellite Downlink Communication
Over the decades, C-band frequencies have gained popularity in various wireless systems including mobile, radar, and satellite communications. However, this frequency band suffers from substantial interference due to sharing of its spectrum with Broadband Wireless Access networks and several operational VSATs. This paper presents a dual-band bandstop filter implemented using frequency selective surface (FSS) for minimizing interference in the C band downlink satellite system. The dual-band FSS unit cell is designed using a circular ring with rectangular slots on the top layer and a Swastika symbol at the bottom, which has a dimension of 0.32λ 0 ×0.32λ 0 (free space wavelength at 6 GHz). The performances of the proposed filter in terms of transmission coefficients, reflection coefficients, surface current distribution, and angular stability are analyzed. The results demonstrate that the filter resonates at two distinct frequencies of 5 GHz and 7.2 GHz within the C band. It is revealed that the dual-band filter exhibits angular stability up to 30° in both TE and TM mode polarizations.
- 12 October 2021
- Published by Springer Nature
- p. 957-964
An Inverted L-Shaped ACS-fed Antenna with SRR for Bandwidth Enhancement Application
- 12 October 2021
- Published by Springer Nature
- p. 957-964
An Inverted L-Shaped ACS-fed Antenna with SRR for Bandwidth Enhancement Application
- 1 September 2021
- Published by Elsevier in Measurement
- Vol. 182
Modified minkowski fractal multiband antenna with circular-shaped split-ring resonator for wireless applications
- 1 September 2021
- Published by Elsevier in Measurement
- Vol. 182
Modified minkowski fractal multiband antenna with circular-shaped split-ring resonator for wireless applications
- 1 January 2021
- Published by The Electromagnetics Academy in Progress in Electromagnetics Research C
- Vol. 112, 207-219
A HIGH ISOLATION MULTIBAND MIMO ANTENNA WITHOUT DECOUPLING STRUCTURE FOR WLAN/WIMAX/5G APPLICATIONS
- 1 January 2021
- Published by The Electromagnetics Academy in Progress in Electromagnetics Research C
- Vol. 112, 207-219
A HIGH ISOLATION MULTIBAND MIMO ANTENNA WITHOUT DECOUPLING STRUCTURE FOR WLAN/WIMAX/5G APPLICATIONS
- Open Access
- 1 October 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 590 (1) , 012061
Coplanar Waveguide fed MIMO RDR Antenna for ISM Band Frequencies
A Multiple-Input-Multiple-Output (MIMO) Rectangular Dielectric Resonator Antenna (RDRA) is presented in this paper for industrial scientific and medical applications with 2.45 GHz. The geomentry of proposed antenna is fabricated on low cost FR-4 substrate with dielectric constant of 4.4 with coplanar waveguide (CPW) inductive slot and its physical dimension is 69.3 X 73 X 1.6 mm3 (Length x Width x Height). In this work, RDRA uses two orthogonal modes with two different mechanisms and they are coplanar waveguide (CPW) and coaxial probe. The proposed MIMO RDR Antenna is expected to give various features such as isolation beyond 20 dBi range over the frequency of operation, positive gain, VSWR, Z-parameters display, 2-D current distribution using azimuthal and elevation patterns.
- 1 October 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 590 (1) , 012061
Open AccessCoplanar Waveguide fed MIMO RDR Antenna for ISM Band Frequencies
A Multiple-Input-Multiple-Output (MIMO) Rectangular Dielectric Resonator Antenna (RDRA) is presented in this paper for industrial scientific and medical applications with 2.45 GHz. The geomentry of proposed antenna is fabricated on low cost FR-4 substrate with dielectric constant of 4.4 with coplanar waveguide (CPW) inductive slot and its physical dimension is 69.3 X 73 X 1.6 mm3 (Length x Width x Height). In this work, RDRA uses two orthogonal modes with two different mechanisms and they are coplanar waveguide (CPW) and coaxial probe. The proposed MIMO RDR Antenna is expected to give various features such as isolation beyond 20 dBi range over the frequency of operation, positive gain, VSWR, Z-parameters display, 2-D current distribution using azimuthal and elevation patterns.
- 5 September 2018
- Published by Science Publishing Corporation in International Journal of Engineering & Technology
- Vol. 7 (4) , 2525-2527
Design of CPW antenna for network applications
The novel CPW antenna design consists of monopole, which can used for High speed wide area or local area corporate networks and Video & CCTV surveillance networks and Long-range Rural connectivity. This antenna has been designed with design size parameters of 59.5(L) x 30 (W) x 1.6-(H) mm2, the dielectric constant of FR4 substrate is 4.4, and loss tangent of 0.002 is used. The resonant frequency range of this proposed antenna is 5.85 - 6.6 GHz with return loss above of -10dB achieved. The peak gain of this antenna is 5.5dBi and in addition the S, Z-parameters, VSWR, 2D & 3D radiation pattern are also derived. Good results are achieved after simulation.
- 5 September 2018
- Published by Science Publishing Corporation in International Journal of Engineering & Technology
- Vol. 7 (4) , 2525-2527
Design of CPW antenna for network applications
The novel CPW antenna design consists of monopole, which can used for High speed wide area or local area corporate networks and Video & CCTV surveillance networks and Long-range Rural connectivity. This antenna has been designed with design size parameters of 59.5(L) x 30 (W) x 1.6-(H) mm2, the dielectric constant of FR4 substrate is 4.4, and loss tangent of 0.002 is used. The resonant frequency range of this proposed antenna is 5.85 - 6.6 GHz with return loss above of -10dB achieved. The peak gain of this antenna is 5.5dBi and in addition the S, Z-parameters, VSWR, 2D & 3D radiation pattern are also derived. Good results are achieved after simulation.
- Open Access
- 1 June 2017
- Published by Elsevier in Alexandria Engineering Journal
- Vol. 56 (2) , 231-234
Design and development of CPW fed monopole antenna at 2.45 GHz and 5.5 GHz for wireless applications
- 1 June 2017
- Published by Elsevier in Alexandria Engineering Journal
- Vol. 56 (2) , 231-234
Open AccessDesign and development of CPW fed monopole antenna at 2.45 GHz and 5.5 GHz for wireless applications
- 1 December 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
A high efficient compact CPW fed hexagonal slot antenna for diversified applications
In this paper, a compact, high efficient CPW (co-planar waveguide) fed antenna which is used for various applications is proposed. In this work, the proposed antenna is evaluated using IE3D simulation software. The proposed antenna has the compact size of 16.55mm × 20.05mm × 1.6 mm and the substrate is RT_Duroid 5880 used (ε r is 2.2 and tanδ is 0.0009). The antenna resonates at 8.5 to 8.7 GHz frequency, with a return loss value of proposed antenna shows -48dB at 8.64 GHz. The gain obtained is 5.5 dBi, VSWR of around 1.1 at 8.64 GHz. The antenna is found to have 80% efficiency.
- 1 December 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
A high efficient compact CPW fed hexagonal slot antenna for diversified applications
In this paper, a compact, high efficient CPW (co-planar waveguide) fed antenna which is used for various applications is proposed. In this work, the proposed antenna is evaluated using IE3D simulation software. The proposed antenna has the compact size of 16.55mm × 20.05mm × 1.6 mm and the substrate is RT_Duroid 5880 used (ε r is 2.2 and tanδ is 0.0009). The antenna resonates at 8.5 to 8.7 GHz frequency, with a return loss value of proposed antenna shows -48dB at 8.64 GHz. The gain obtained is 5.5 dBi, VSWR of around 1.1 at 8.64 GHz. The antenna is found to have 80% efficiency.
- 19 September 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
MQTT based secured home automation system
In this paper we discuss and create a MQTT based Secured home automation system, by using mentioned sensors and using Raspberry pi B+ model as the network gateway, here we have implemented MQTT Protocol for transferring & receiving sensor data and finally getting access to those sensor data, also we have implemented ACL (access control list) to provide encryption method for the data and finally monitoring those data on webpage or any network devices. R-pi has been used as a gateway or the main server in the whole system, which has various sensor connected to it via wired or wireless communication.
- 19 September 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
MQTT based secured home automation system
In this paper we discuss and create a MQTT based Secured home automation system, by using mentioned sensors and using Raspberry pi B+ model as the network gateway, here we have implemented MQTT Protocol for transferring & receiving sensor data and finally getting access to those sensor data, also we have implemented ACL (access control list) to provide encryption method for the data and finally monitoring those data on webpage or any network devices. R-pi has been used as a gateway or the main server in the whole system, which has various sensor connected to it via wired or wireless communication.