Yuxin Song
Research Subjects
Yuxin Song has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Li-Ming Yang
College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics 1 , Nanjing, Jiangsu
10 shared publications - Yang Xiao
Nanjing University of Aeronautics and Astronautics
10 shared publications - C. Shu
National University of Singapore
7 shared publications - Yinjie Du
Nanjing University of Aeronautics and Astronautics
6 shared publications C. Shu
2 shared publicationsY. J. Du
2 shared publications
Latest Publications
- 17 September 2026
- Published by Elsevier in Computers & Mathematics with Applications
- Vol. 222, 138-161
A high-order generalized differential quadrature element method with double distribution function-based lattice Boltzmann flux solver and its application
- 17 September 2026
- Published by Elsevier in Computers & Mathematics with Applications
- Vol. 222, 138-161
A high-order generalized differential quadrature element method with double distribution function-based lattice Boltzmann flux solver and its application
- 1 May 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (5)
Development of a high-order generalized differential quadrature element method with thermal lattice Boltzmann flux solver for simulation of incompressible thermal flows
This paper presents a high-order generalized differential quadrature element (GDQE)-thermal lattice Boltzmann flux solver (TLBFS) for simulating incompressible thermal flows. The GDQE method partitions the computational domain into multiple elements, within which the GDQ technique is applied to approximate solution gradients and flux divergences via high-order polynomial interpolations. The TLBFS is then utilized to reconstruct the distribution functions of density and internal energy, enabling the simultaneous evaluation of inviscid and viscous fluxes. Numerical examples confirm that the present method is well-suited for handling thermal flow problems with curved boundaries and complex geometry on arbitrary meshes, while achieving good solution accuracy and computational efficiency. The good performance also suggests the great potential in solving practical thermal flow problems.
- 1 May 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (5)
Development of a high-order generalized differential quadrature element method with thermal lattice Boltzmann flux solver for simulation of incompressible thermal flows
This paper presents a high-order generalized differential quadrature element (GDQE)-thermal lattice Boltzmann flux solver (TLBFS) for simulating incompressible thermal flows. The GDQE method partitions the computational domain into multiple elements, within which the GDQ technique is applied to approximate solution gradients and flux divergences via high-order polynomial interpolations. The TLBFS is then utilized to reconstruct the distribution functions of density and internal energy, enabling the simultaneous evaluation of inviscid and viscous fluxes. Numerical examples confirm that the present method is well-suited for handling thermal flow problems with curved boundaries and complex geometry on arbitrary meshes, while achieving good solution accuracy and computational efficiency. The good performance also suggests the great potential in solving practical thermal flow problems.
- 1 June 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (6)
A novel quantum Fourier ordinary differential equation solver for solving linear and nonlinear partial differential equations
In this work, a novel quantum Fourier ordinary differential equation (ODE) solver is proposed to solve both linear and nonlinear partial differential equations (PDEs). Traditional quantum ODE solvers transform a PDE into an ODE system via spatial discretization and then integrate it, thereby converting the task of solving the PDE into computing the integral for the driving function f(x). These solvers rely on the quantum amplitude estimation algorithm, which requires the driving function f(x) to be within the range of [0, 1] and necessitates the construction of a quantum circuit for the oracle R that encodes f(x). This construction can be highly complex, even for simple functions like f(x) = x. An important exception arises for the specific case of f(x) = sin2(mx + c), which can be encoded more efficiently using a set of Ry rotation gates. To address these challenges, we expand the driving function f(x) as a Fourier series and propose the quantum Fourier ODE Solver. This approach not only simplifies the construction of the oracle R but also removes the restriction that f(x) must lie within [0,1]. The proposed method was evaluated by solving several representative linear and nonlinear PDEs, including the Navier–Stokes (N–S) equations. The results show that the quantum Fourier ODE solver produces results that closely match both analytical and reference solutions.
- 1 June 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (6)
A novel quantum Fourier ordinary differential equation solver for solving linear and nonlinear partial differential equations
In this work, a novel quantum Fourier ordinary differential equation (ODE) solver is proposed to solve both linear and nonlinear partial differential equations (PDEs). Traditional quantum ODE solvers transform a PDE into an ODE system via spatial discretization and then integrate it, thereby converting the task of solving the PDE into computing the integral for the driving function f(x). These solvers rely on the quantum amplitude estimation algorithm, which requires the driving function f(x) to be within the range of [0, 1] and necessitates the construction of a quantum circuit for the oracle R that encodes f(x). This construction can be highly complex, even for simple functions like f(x) = x. An important exception arises for the specific case of f(x) = sin2(mx + c), which can be encoded more efficiently using a set of Ry rotation gates. To address these challenges, we expand the driving function f(x) as a Fourier series and propose the quantum Fourier ODE Solver. This approach not only simplifies the construction of the oracle R but also removes the restriction that f(x) must lie within [0,1]. The proposed method was evaluated by solving several representative linear and nonlinear PDEs, including the Navier–Stokes (N–S) equations. The results show that the quantum Fourier ODE solver produces results that closely match both analytical and reference solutions.
- 31 December 2024
- Published by Elsevier in Ocean Engineering
- Vol. 319
Immersed boundary method-incorporated physics-informed neural network for simulation of incompressible flows around immersed objects
- 31 December 2024
- Published by Elsevier in Ocean Engineering
- Vol. 319
Immersed boundary method-incorporated physics-informed neural network for simulation of incompressible flows around immersed objects
- 11 September 2024
- Published by Elsevier in Computers & Mathematics with Applications
- Vol. 175, 33-48
Least-square finite difference-based physics-informed neural network for steady incompressible flows
- 11 September 2024
- Published by Elsevier in Computers & Mathematics with Applications
- Vol. 175, 33-48
Least-square finite difference-based physics-informed neural network for steady incompressible flows
- 1 June 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (6)
Double distribution function-based lattice Boltzmann flux solver for simulation of compressible viscous flows
In this work, a double distribution function-based lattice Boltzmann flux solver (LBFS) is proposed for simulating compressible viscous flows. This approach utilizes the double distribution function compressible lattice Boltzmann model and employs Chapman–Enskog expansion analysis to connect the lattice Boltzmann equation (LBE) with the Navier–Stokes (N–S) equations. Unlike conventional computational fluid dynamics methods that compute inviscid and viscous fluxes separately, the present method simultaneously evaluates both types of fluxes at the cell interface by locally reconstructing the solution of the LBE. Recognizing the significance of considering the non-equilibrium part of distribution functions for viscous flows, a straightforward method is introduced to calculate this component. This facilitates the derivation of computational expressions for macroscopic conservative variables and fluxes in the N–S equations. To validate the accuracy and stability of the present numerical scheme, various benchmark problems, including shock tube problem, Couette flow, lid-driven cavity flow, and flow around the NACA0012 airfoil, are tested. The obtained numerical results are compared with analytical solutions or existing reference data, confirming the capability of the proposed LBFS to deliver accurate and stable numerical results for compressible flows. Moreover, this method demonstrates effectiveness in handling viscous flow problems on non-uniform grids and with curved boundaries.
- 1 June 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (6)
Double distribution function-based lattice Boltzmann flux solver for simulation of compressible viscous flows
In this work, a double distribution function-based lattice Boltzmann flux solver (LBFS) is proposed for simulating compressible viscous flows. This approach utilizes the double distribution function compressible lattice Boltzmann model and employs Chapman–Enskog expansion analysis to connect the lattice Boltzmann equation (LBE) with the Navier–Stokes (N–S) equations. Unlike conventional computational fluid dynamics methods that compute inviscid and viscous fluxes separately, the present method simultaneously evaluates both types of fluxes at the cell interface by locally reconstructing the solution of the LBE. Recognizing the significance of considering the non-equilibrium part of distribution functions for viscous flows, a straightforward method is introduced to calculate this component. This facilitates the derivation of computational expressions for macroscopic conservative variables and fluxes in the N–S equations. To validate the accuracy and stability of the present numerical scheme, various benchmark problems, including shock tube problem, Couette flow, lid-driven cavity flow, and flow around the NACA0012 airfoil, are tested. The obtained numerical results are compared with analytical solutions or existing reference data, confirming the capability of the proposed LBFS to deliver accurate and stable numerical results for compressible flows. Moreover, this method demonstrates effectiveness in handling viscous flow problems on non-uniform grids and with curved boundaries.
- 1 January 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (1)
An immersed boundary velocity correction method combined with virtual body-fitted grid for simulation of incompressible flows
In this work, a virtual body-fitted grid is introduced into the velocity correction-based immersed boundary method (IBM) to simulate incompressible flows. The impact of the immersed boundary is indirectly transmitted to the flow field via a virtual body-fitted grid. In this method, the fractional step technique consisting of the predictor and the corrector is adopted. The prediction step is executed on the Eulerian mesh, and the correction step is done on the virtual grid to fulfill the no-slip boundary condition. After the correction step, the corrected velocity field on the virtual grid is then assigned to that on the Eulerian mesh to update the flow field. Being able to adjust the grid spacing flexibly, the virtual body-fitted grid alleviates the shortcomings of the conventional IBM that uses the smooth Dirac delta function to associate Lagrangian points with their surrounding Eulerian points. As a result, the present method is easy to apply to non-uniform Cartesian grids, which is inapplicable to the conventional IBM with the smooth Dirac delta function. Numerical experiments concerning flow past a circular cylinder and a NACA0012 airfoil demonstrate the advantages of the present method, i.e., fewer Lagrangian points are required to avoid the streamline penetration of boundary and the range of “diffuse interface” can be narrowed by reducing the normal grid spacing of the virtual body-fitted grid to improve numerical results on a coarse mesh. In addition, an accuracy assessment on the decaying vortex problem reveals that the present IBM has a second-order accuracy.
- 1 January 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (1)
An immersed boundary velocity correction method combined with virtual body-fitted grid for simulation of incompressible flows
In this work, a virtual body-fitted grid is introduced into the velocity correction-based immersed boundary method (IBM) to simulate incompressible flows. The impact of the immersed boundary is indirectly transmitted to the flow field via a virtual body-fitted grid. In this method, the fractional step technique consisting of the predictor and the corrector is adopted. The prediction step is executed on the Eulerian mesh, and the correction step is done on the virtual grid to fulfill the no-slip boundary condition. After the correction step, the corrected velocity field on the virtual grid is then assigned to that on the Eulerian mesh to update the flow field. Being able to adjust the grid spacing flexibly, the virtual body-fitted grid alleviates the shortcomings of the conventional IBM that uses the smooth Dirac delta function to associate Lagrangian points with their surrounding Eulerian points. As a result, the present method is easy to apply to non-uniform Cartesian grids, which is inapplicable to the conventional IBM with the smooth Dirac delta function. Numerical experiments concerning flow past a circular cylinder and a NACA0012 airfoil demonstrate the advantages of the present method, i.e., fewer Lagrangian points are required to avoid the streamline penetration of boundary and the range of “diffuse interface” can be narrowed by reducing the normal grid spacing of the virtual body-fitted grid to improve numerical results on a coarse mesh. In addition, an accuracy assessment on the decaying vortex problem reveals that the present IBM has a second-order accuracy.
- Open Access
- 1 August 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (8)
Inverse distance weighting interpolation-based immersed boundary velocity correction method for incompressible flows
In this work, the inverse distance weighting (IDW) interpolation is introduced into the implicit velocity correction-based immersed boundary method (IBM) for simulation of incompressible flows. In the original implicit velocity correction-based IBM, the solid body must be immersed in a uniform mesh region due to the use of the smooth Dirac delta function, which is utilized to associate Lagrangian points with their surrounding Eulerian points and only works with uniform meshes. The IDW method has the advantage that the interpolation range can be set flexibly. The introduction of the IDW interpolation can extend the application of the IBM to non-uniform meshes while reducing the number of Lagrangian points. The numerical test by the decaying vortex problem proves that the IDW interpolation does not significantly affect the overall accuracy of the IBM. In addition, numerical experiments for the flows around a circular cylinder and a NACA0012 airfoil demonstrate the advantages of the proposed method, including allowing fewer Lagrangian points while ensuring no streamline penetration to the solid body, as well as its adaptability to non-uniform meshes which can improve the computational efficiency due to the use of fewer mesh points. Finally, the simulation of the flow past a stationary sphere illustrates that the proposed method can effectively simulate the three-dimensional flow.
- 1 August 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (8)
Open AccessInverse distance weighting interpolation-based immersed boundary velocity correction method for incompressible flows
In this work, the inverse distance weighting (IDW) interpolation is introduced into the implicit velocity correction-based immersed boundary method (IBM) for simulation of incompressible flows. In the original implicit velocity correction-based IBM, the solid body must be immersed in a uniform mesh region due to the use of the smooth Dirac delta function, which is utilized to associate Lagrangian points with their surrounding Eulerian points and only works with uniform meshes. The IDW method has the advantage that the interpolation range can be set flexibly. The introduction of the IDW interpolation can extend the application of the IBM to non-uniform meshes while reducing the number of Lagrangian points. The numerical test by the decaying vortex problem proves that the IDW interpolation does not significantly affect the overall accuracy of the IBM. In addition, numerical experiments for the flows around a circular cylinder and a NACA0012 airfoil demonstrate the advantages of the proposed method, including allowing fewer Lagrangian points while ensuring no streamline penetration to the solid body, as well as its adaptability to non-uniform meshes which can improve the computational efficiency due to the use of fewer mesh points. Finally, the simulation of the flow past a stationary sphere illustrates that the proposed method can effectively simulate the three-dimensional flow.
- Open Access
- 1 July 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (7)
Radial basis function-differential quadrature-based physics-informed neural network for steady incompressible flows
In this work, a radial basis function differential quadrature-based physics-informed neural network (RBFDQ-PINN) is proposed to simulate steady incompressible flows. The conventional physics-informed neural network (PINN) makes use of the physical equation as a constraint to ensure that the solution satisfies the physical law and the automatic differentiation (AD) method to calculate derivatives at collocation points. Although the AD-PINN is expedient in evaluating derivatives at arbitrary points, it is time-consuming with higher-order derivatives and may lead to nonphysical solutions with sparse samples. Alternatively, the finite difference (FD) method can facilitate the calculation of derivatives, but the FD-PINN will increase the computational cost when handling random point distributions, especially with higher-order discretization schemes. To address these issues, the radial basis function differential quadrature (RBFDQ) method is incorporated into the PINN to replace the AD method for the calculation of derivatives. The RBFDQ method equips with high efficiency in the calculation of high-order derivatives as compared with the AD method and great flexibility in the distribution of mesh points as compared with the FD method. As a result, the proposed RBFDQ-PINN is not only more efficient and accurate but also applicable to irregular geometries. To demonstrate its effectiveness, the RBFDQ-PINN is tested in sample problems such as the lid-driven cavity flow, the channel flow over a backward-facing step, and the flow around a circular cylinder. Numerical results reveal that the RBFDQ-PINN achieves satisfactory accuracy without any labeled collocation points, whereas the AD-PINN struggles to solve some cases, especially for high Reynolds number flows.
- 1 July 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (7)
Open AccessRadial basis function-differential quadrature-based physics-informed neural network for steady incompressible flows
In this work, a radial basis function differential quadrature-based physics-informed neural network (RBFDQ-PINN) is proposed to simulate steady incompressible flows. The conventional physics-informed neural network (PINN) makes use of the physical equation as a constraint to ensure that the solution satisfies the physical law and the automatic differentiation (AD) method to calculate derivatives at collocation points. Although the AD-PINN is expedient in evaluating derivatives at arbitrary points, it is time-consuming with higher-order derivatives and may lead to nonphysical solutions with sparse samples. Alternatively, the finite difference (FD) method can facilitate the calculation of derivatives, but the FD-PINN will increase the computational cost when handling random point distributions, especially with higher-order discretization schemes. To address these issues, the radial basis function differential quadrature (RBFDQ) method is incorporated into the PINN to replace the AD method for the calculation of derivatives. The RBFDQ method equips with high efficiency in the calculation of high-order derivatives as compared with the AD method and great flexibility in the distribution of mesh points as compared with the FD method. As a result, the proposed RBFDQ-PINN is not only more efficient and accurate but also applicable to irregular geometries. To demonstrate its effectiveness, the RBFDQ-PINN is tested in sample problems such as the lid-driven cavity flow, the channel flow over a backward-facing step, and the flow around a circular cylinder. Numerical results reveal that the RBFDQ-PINN achieves satisfactory accuracy without any labeled collocation points, whereas the AD-PINN struggles to solve some cases, especially for high Reynolds number flows.