Tengfei Cai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tengfei Cai has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
Fei Ma
5 shared publications- Leonardo P. Chamorro
University of Illinois
4 shared publications - Lifang Zheng
School of Mechanical Engineering, University of Science and Technology Beijing 1 , Beijing 100083
3 shared publications Lifang Zheng
2 shared publicationsShuaiwang Yuan
2 shared publicationsYi Wang
2 shared publications
Latest Publications
- 1 October 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (10)
Erosion characteristics of aluminum and copper under double-excited cavitating waterjets
Building upon our previous characterization of the cavitation cloud dynamics, this study presents a systematic quantification of the erosion performance of a double-excited cavitating waterjet on aluminum and copper targets. The erosion performance of a double-excited cavitating waterjet, combining active and passive excitation, is investigated across a range of standoff distances using aluminum and copper targets, with single-passive, single-active, and non-excited cavitating waterjets as benchmarks. Erosion behavior is quantified through optimal standoff distance, cumulative mass loss, cumulative erosion rate, instantaneous erosion rate, and surface morphology. Results show that the double-excited cavitating waterjet markedly enhances erosion compared to single- and non-excited configurations. This enhancement is attributed to the combined interaction between pulsed-jet-induced impulsive loading and intensified cavitation-collapse dynamics. For aluminum, the optimal standoff distance is comparable to that of the single-passive cavitating waterjet, whereas for copper, it shifts to shorter distances, reflecting the relative contributions of impulsive loading and cavitation-driven damage. The coupled excitation accelerates the onset of erosion, shortens the incubation and deceleration stages, and sustains higher erosion rates. Surface characterization reveals deeper craters and wider material removal zones under the double-excited cavitating waterjet, confirming enhanced erosion performance. These results demonstrate that combined active–passive excitation provides an effective pathway for process intensification in cavitating waterjet-based material removal.
- 1 October 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (10)
Erosion characteristics of aluminum and copper under double-excited cavitating waterjets
Building upon our previous characterization of the cavitation cloud dynamics, this study presents a systematic quantification of the erosion performance of a double-excited cavitating waterjet on aluminum and copper targets. The erosion performance of a double-excited cavitating waterjet, combining active and passive excitation, is investigated across a range of standoff distances using aluminum and copper targets, with single-passive, single-active, and non-excited cavitating waterjets as benchmarks. Erosion behavior is quantified through optimal standoff distance, cumulative mass loss, cumulative erosion rate, instantaneous erosion rate, and surface morphology. Results show that the double-excited cavitating waterjet markedly enhances erosion compared to single- and non-excited configurations. This enhancement is attributed to the combined interaction between pulsed-jet-induced impulsive loading and intensified cavitation-collapse dynamics. For aluminum, the optimal standoff distance is comparable to that of the single-passive cavitating waterjet, whereas for copper, it shifts to shorter distances, reflecting the relative contributions of impulsive loading and cavitation-driven damage. The coupled excitation accelerates the onset of erosion, shortens the incubation and deceleration stages, and sustains higher erosion rates. Surface characterization reveals deeper craters and wider material removal zones under the double-excited cavitating waterjet, confirming enhanced erosion performance. These results demonstrate that combined active–passive excitation provides an effective pathway for process intensification in cavitating waterjet-based material removal.
- 1 August 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (8)
Nozzle-lip effects on co-flow self-excited cavitating waterjets for cavitation peening
Cavitation peening offers a promising non-contact surface treatment alternative to conventional shot peening, but its application is often limited by the requirement of submerged operation. Co-flow cavitating waterjets overcome this constraint by using an annular liquid curtain to sustain cavitation in air. However, the role of nozzle geometry remains poorly understood. Here, we examine how the nozzle-lip geometry governs this process by comparing two distinct configurations—a horn lip and a cylindrical lip—in a co-flow self-excited cavitating waterjet equipped with an organ-pipe resonator. Through erosion tests on pure aluminum, high-speed imaging, proper orthogonal decomposition, acoustic and pressure spectral analysis, and complementary large-eddy simulations, we establish a mechanistic link between lip-induced near-field hydrodynamics and the resulting erosion intensity. The horn lip produces a markedly stronger cavitation response: it increases the mean mass loss by approximately 31% and expands the erosion-ring area by about 26% relative to the cylindrical lip. This enhanced performance is traced to a fundamental reorganization of the near-nozzle flow field—the horn geometry generates a stronger low-pressure region near the exit, induces localized backflow, intensifies the shear layer, and promotes vortex coalescence, leading to larger, more coherent cavitation clouds and a lower shedding frequency. Crucially, this reorganization strengthens the acoustic–hydrodynamic coupling with the organ-pipe resonator, amplifying the internal pressure response from 538 to 1565 Pa. These results demonstrate that nozzle-lip geometry is not merely a passive boundary condition, but an active control parameter that governs vapor-cloud organization, resonant feedback, and erosion intensity in co-flow self-excited cavitating jets, offering a design pathway for more efficient cavitation-peening nozzles.
- 1 August 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (8)
Nozzle-lip effects on co-flow self-excited cavitating waterjets for cavitation peening
Cavitation peening offers a promising non-contact surface treatment alternative to conventional shot peening, but its application is often limited by the requirement of submerged operation. Co-flow cavitating waterjets overcome this constraint by using an annular liquid curtain to sustain cavitation in air. However, the role of nozzle geometry remains poorly understood. Here, we examine how the nozzle-lip geometry governs this process by comparing two distinct configurations—a horn lip and a cylindrical lip—in a co-flow self-excited cavitating waterjet equipped with an organ-pipe resonator. Through erosion tests on pure aluminum, high-speed imaging, proper orthogonal decomposition, acoustic and pressure spectral analysis, and complementary large-eddy simulations, we establish a mechanistic link between lip-induced near-field hydrodynamics and the resulting erosion intensity. The horn lip produces a markedly stronger cavitation response: it increases the mean mass loss by approximately 31% and expands the erosion-ring area by about 26% relative to the cylindrical lip. This enhanced performance is traced to a fundamental reorganization of the near-nozzle flow field—the horn geometry generates a stronger low-pressure region near the exit, induces localized backflow, intensifies the shear layer, and promotes vortex coalescence, leading to larger, more coherent cavitation clouds and a lower shedding frequency. Crucially, this reorganization strengthens the acoustic–hydrodynamic coupling with the organ-pipe resonator, amplifying the internal pressure response from 538 to 1565 Pa. These results demonstrate that nozzle-lip geometry is not merely a passive boundary condition, but an active control parameter that governs vapor-cloud organization, resonant feedback, and erosion intensity in co-flow self-excited cavitating jets, offering a design pathway for more efficient cavitation-peening nozzles.
- 9 January 2026
- Published by Elsevier in Journal of Manufacturing Processes
- Vol. 158, 389-400
Mechanisms and acoustic signatures of rock fracture induced by double-excited pulse waterjets
- 9 January 2026
- Published by Elsevier in Journal of Manufacturing Processes
- Vol. 158, 389-400
Mechanisms and acoustic signatures of rock fracture induced by double-excited pulse waterjets
- Open Access
- 1 December 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (12)
Cavitation cloud of waterjet under double excitation
This study experimentally explores the interplay of active and passive excitation on double-excited cavitating waterjet clouds. High-speed imaging and high-frequency pressure sensors are used to characterize the impact of piezoelectric transducers for active excitation and nozzle lip geometries for strong, moderate, and weak passive excitation conditions. The analysis of pressure fluctuations revealed that under active excitation, the waterjet exhibited forced oscillations characterized by an amplitude amplification exceeding that of single passive excitation by an order of magnitude. High-speed imaging, combined with proper orthogonal decomposition, allowed us to observe an expansion in the volume, size, and effective standoff distance of cavitation clouds upon introducing active excitation across all passive excitation scenarios. The synergy between strong passive excitation and harmonized frequency with active excitation resulted in the most robust cavitation cloud development, characterized by the highest intensity.
- 1 December 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (12)
Open AccessCavitation cloud of waterjet under double excitation
This study experimentally explores the interplay of active and passive excitation on double-excited cavitating waterjet clouds. High-speed imaging and high-frequency pressure sensors are used to characterize the impact of piezoelectric transducers for active excitation and nozzle lip geometries for strong, moderate, and weak passive excitation conditions. The analysis of pressure fluctuations revealed that under active excitation, the waterjet exhibited forced oscillations characterized by an amplitude amplification exceeding that of single passive excitation by an order of magnitude. High-speed imaging, combined with proper orthogonal decomposition, allowed us to observe an expansion in the volume, size, and effective standoff distance of cavitation clouds upon introducing active excitation across all passive excitation scenarios. The synergy between strong passive excitation and harmonized frequency with active excitation resulted in the most robust cavitation cloud development, characterized by the highest intensity.
- 4 August 2023
- Published by Elsevier in Ocean Engineering
- Vol. 286
Underwater soil parameters identification of tracked mobile robot
- 4 August 2023
- Published by Elsevier in Ocean Engineering
- Vol. 286
Underwater soil parameters identification of tracked mobile robot
- 15 July 2023
- Published by Elsevier in Ocean Engineering
- Vol. 285
Impact of nozzle lip on the cavitation cloud characteristics of self-excited cavitating waterjets
- 15 July 2023
- Published by Elsevier in Ocean Engineering
- Vol. 285
Impact of nozzle lip on the cavitation cloud characteristics of self-excited cavitating waterjets