Parul Sharma
Research Subjects
Parul Sharma has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
Chaitanya Sharma
Department of Botany, Kurukshetra University, Kurukshetra 136119, India
3 shared publicationsMonika Janaagal
Department of Botany and Plant Physiology, College of Basic Science and Humanities, CCS Haryana Agricultural University, Hisar 125004, India
3 shared publications- Nita Lakra
Department of Molecular Biology & Biotechnology, College of Biotechnology, CCS Haryana Agricultural University, Hisar 125004, India
3 shared publications Asha Rani Sheoran
Department of Molecular Biology, Biotechnology and Bioinformatics, CCS Haryana Agricultural University, Hisar, India
2 shared publicationsNita Lakra
Department of Molecular Biology & Biotechnology, College of Biotechnology, CCS Haryana Agricultural University, Hisar, India
2 shared publications- Yogesh Kumar Ahlawat
Centre of Research Impact and Outcome, Chitkara University, Rajpura 140401, Punjab, India
2 shared publications
Latest Publications
- 10 December 2024
- Published by Sciencedomain International in Asian Journal of Advances in Agricultural Research
- Vol. 24  (12) , 75-88
Nanoparticle Innovations in Plant Systems: Enhancing Photosynthesis and Nutrient Dynamics
Plant nanobionics is an innovative interdisciplinary approach which integrates engineered nanoparticles into plant systems to enhance their natural functionalities and enable novel capabilities. This paper explores the potential of nanoparticles to improve photosynthetic efficiency, nutrient uptake, and increase plant resilience against environmental stressors. Enhancing carbon fixation with functionalized silica nanoparticles, reducing photoinhibition with cerium oxide nanoparticles, and broadening the light absorption spectrum with nanomaterials such as carbon nanotubes (CNTs) and quantum dots are some of the main uses of plant nanobionics. These advancements offer solutions to fundamental limitations in photosynthesis, including suboptimal light ustilization, restricted carbon dioxide availability, and oxidative stress. Nanoparticles also revolutionize nutrient management through innovations such as nanofertilizers and chelated metal nanoparticles. These technologies enhance nutrient bioavailability, minimize environmental impacts, and improve plant growth in nutrient-deficient soils. For example, zinc oxide and iron oxide nanoparticles encourage the effective delivery and uptake of nutrients, while titanium dioxide and carbon-based nanomaterials contribute to soil remediation by immobilizing heavy metals and improving soil health. Nanotechnology in agriculture offers transformative benefits such as increased crop yields, sustainable resources management, and climate change mitigation. However, challenges such as environmental safety, scalability, and regulatory considerations must be addressed to ensure responsible application. This study highlights the role of plant nanobionics in advancing agricultural productivity and sustainability, emphasizing its potential to address global challenges such as food security and environmental conservation.
- 10 December 2024
- Published by Sciencedomain International in Asian Journal of Advances in Agricultural Research
- Vol. 24  (12) , 75-88
Nanoparticle Innovations in Plant Systems: Enhancing Photosynthesis and Nutrient Dynamics
Plant nanobionics is an innovative interdisciplinary approach which integrates engineered nanoparticles into plant systems to enhance their natural functionalities and enable novel capabilities. This paper explores the potential of nanoparticles to improve photosynthetic efficiency, nutrient uptake, and increase plant resilience against environmental stressors. Enhancing carbon fixation with functionalized silica nanoparticles, reducing photoinhibition with cerium oxide nanoparticles, and broadening the light absorption spectrum with nanomaterials such as carbon nanotubes (CNTs) and quantum dots are some of the main uses of plant nanobionics. These advancements offer solutions to fundamental limitations in photosynthesis, including suboptimal light ustilization, restricted carbon dioxide availability, and oxidative stress. Nanoparticles also revolutionize nutrient management through innovations such as nanofertilizers and chelated metal nanoparticles. These technologies enhance nutrient bioavailability, minimize environmental impacts, and improve plant growth in nutrient-deficient soils. For example, zinc oxide and iron oxide nanoparticles encourage the effective delivery and uptake of nutrients, while titanium dioxide and carbon-based nanomaterials contribute to soil remediation by immobilizing heavy metals and improving soil health. Nanotechnology in agriculture offers transformative benefits such as increased crop yields, sustainable resources management, and climate change mitigation. However, challenges such as environmental safety, scalability, and regulatory considerations must be addressed to ensure responsible application. This study highlights the role of plant nanobionics in advancing agricultural productivity and sustainability, emphasizing its potential to address global challenges such as food security and environmental conservation.
- 5 October 2024
- Published by Springer Nature in Journal of Crop Health
- Vol. 76  (6) , 1293-1305
Revolutionizing High Temperature Stress Relief: Exploring the Latest Advances in Salicylic Acid Application
- 5 October 2024
- Published by Springer Nature in Journal of Crop Health
- Vol. 76  (6) , 1293-1305
Revolutionizing High Temperature Stress Relief: Exploring the Latest Advances in Salicylic Acid Application
- 24 August 2024
- Published by Sciencedomain International in Asian Research Journal of Agriculture
- Vol. 17  (4) , 1059-1071
Multifaceted Responses to Heat Stress in Plants: A Review of the Morpho-physiological, Biochemical and Anatomical Changes
Heat stress, a significant abiotic factor, adversely affects plant growth and productivity by disrupting various physiological and biochemical processes. Plants, being immobile, respond to environmental changes through alterations in gene expression, metabolism, and growth dynamics. Elevated temperatures, exceeding the threshold for heat tolerance, negatively influence critical functions such as photosynthesis, respiration, water balance, and membrane stability. Root development is particularly sensitive to heat stress, resulting in reduced root mass and impaired water and nutrient uptake. Photosynthetic capacity diminishes due to decreased chlorophyll content and impaired photochemical reactions, leading to reduced biomass and yield. Heat stress impacts plant water status by disturbing hydraulic conductivity and increasing membrane permeability, leading to dehydration and a decline in water potential. This stress reduces membrane stability, resulting in electrolyte leakage and cellular damage. It also induces the production of reactive oxygen species (ROS), which requires the activation of antioxidant enzymes to minimize oxidative stress. Also, to maintain osmotic balance and enhance stress tolerance, plants accumulate osmolytes such as proline. Additionally, anatomical adaptations in leaves, stems, and roots, such as changes in stomatal density, xylem vessel size, and gas exchange patterns, highlight the plant's strategies to cope with heat stress. Understanding these varied responses is crucial for developing strategies to enhance crop resilience in the face of increasing global temperatures and climate change.
- 24 August 2024
- Published by Sciencedomain International in Asian Research Journal of Agriculture
- Vol. 17  (4) , 1059-1071
Multifaceted Responses to Heat Stress in Plants: A Review of the Morpho-physiological, Biochemical and Anatomical Changes
Heat stress, a significant abiotic factor, adversely affects plant growth and productivity by disrupting various physiological and biochemical processes. Plants, being immobile, respond to environmental changes through alterations in gene expression, metabolism, and growth dynamics. Elevated temperatures, exceeding the threshold for heat tolerance, negatively influence critical functions such as photosynthesis, respiration, water balance, and membrane stability. Root development is particularly sensitive to heat stress, resulting in reduced root mass and impaired water and nutrient uptake. Photosynthetic capacity diminishes due to decreased chlorophyll content and impaired photochemical reactions, leading to reduced biomass and yield. Heat stress impacts plant water status by disturbing hydraulic conductivity and increasing membrane permeability, leading to dehydration and a decline in water potential. This stress reduces membrane stability, resulting in electrolyte leakage and cellular damage. It also induces the production of reactive oxygen species (ROS), which requires the activation of antioxidant enzymes to minimize oxidative stress. Also, to maintain osmotic balance and enhance stress tolerance, plants accumulate osmolytes such as proline. Additionally, anatomical adaptations in leaves, stems, and roots, such as changes in stomatal density, xylem vessel size, and gas exchange patterns, highlight the plant's strategies to cope with heat stress. Understanding these varied responses is crucial for developing strategies to enhance crop resilience in the face of increasing global temperatures and climate change.
- Open Access
- 1 August 2024
- Published by Comprehensive Publications in International Journal of Research in Agronomy
- Vol. 7  (8S) , 592-602
Putrescine enhances heat stress tolerance in Brassica juncea L. Seedlings by modulating growth and physiological responses
Heat stress resulting from the increasing global temperatures is emerging as a primary constraint on crop productivity and negatively affects plants. Polyamines (PAs), small, positively charged nitrogenous compounds, play essential roles in plant growth, development, and stress responses. Putrescine (Put) functions as a vital growth regulator, promoting both plant growth and resistance to stress. The primary objective of the present research was to explore the mechanisms through which Put (1 mM) mitigates the adverse effects of heat stress on genotypes RH-1707, RH-1708 (thermosensitive) and RH1566 and RH-1999-42 (thermotolerant). Heat stress led to reduction in growth attributes such as shoot length, root length, fresh weight, dry weight, germination percentage, chlorophyll content and relative water content (RWC) whereas it increased membrane damage as was seen by a rise in electrolyte leakage and lipid peroxidation. The application of Put helped alleviate the adverse effects of heat stress by reducing lipid peroxidation and electrolyte leakage whereas boosting chlorophyll content, RWC and growth parameters. Most significant role of Put in reducing the detrimental effects of heat stress was observed in RH-1707 and RH-1708, which were more susceptible to cellular damage under heat stress. This study specifies that Put foliar spray (1mM) is effective in mitigating the effects of heat stress in Brassica juncea L.
- 1 August 2024
- Published by Comprehensive Publications in International Journal of Research in Agronomy
- Vol. 7  (8S) , 592-602
Open AccessPutrescine enhances heat stress tolerance in Brassica juncea L. Seedlings by modulating growth and physiological responses
Heat stress resulting from the increasing global temperatures is emerging as a primary constraint on crop productivity and negatively affects plants. Polyamines (PAs), small, positively charged nitrogenous compounds, play essential roles in plant growth, development, and stress responses. Putrescine (Put) functions as a vital growth regulator, promoting both plant growth and resistance to stress. The primary objective of the present research was to explore the mechanisms through which Put (1 mM) mitigates the adverse effects of heat stress on genotypes RH-1707, RH-1708 (thermosensitive) and RH1566 and RH-1999-42 (thermotolerant). Heat stress led to reduction in growth attributes such as shoot length, root length, fresh weight, dry weight, germination percentage, chlorophyll content and relative water content (RWC) whereas it increased membrane damage as was seen by a rise in electrolyte leakage and lipid peroxidation. The application of Put helped alleviate the adverse effects of heat stress by reducing lipid peroxidation and electrolyte leakage whereas boosting chlorophyll content, RWC and growth parameters. Most significant role of Put in reducing the detrimental effects of heat stress was observed in RH-1707 and RH-1708, which were more susceptible to cellular damage under heat stress. This study specifies that Put foliar spray (1mM) is effective in mitigating the effects of heat stress in Brassica juncea L.
- 11 April 2024
- Published by Springer Nature in BioNanoScience
- Vol. 14  (4) , 4083-4107
Nano-engineered Solutions for Sustainable Environmental Cleanup
- 11 April 2024
- Published by Springer Nature in BioNanoScience
- Vol. 14  (4) , 4083-4107
Nano-engineered Solutions for Sustainable Environmental Cleanup
- Top Cited PapersOpen Access
- 10 August 2023
- Published by Frontiers Media SA in Frontiers in Plant Science
- Vol. 14, 1216835
Drought and heat stress mediated activation of lipid signaling in plants: a critical review
Lipids are a principal component of plasma membrane, acting as a protective barrier between the cell and its surroundings. Abiotic stresses such as drought and temperature induce various lipid-dependent signaling responses, and the membrane lipids respond differently to environmental challenges. Recent studies have revealed that lipids serve as signal mediators forreducing stress responses in plant cells and activating defense systems. Signaling lipids, such as phosphatidic acid, phosphoinositides, sphingolipids, lysophospholipids, oxylipins, and N-acylethanolamines, are generated in response to stress. Membrane lipids are essential for maintaining the lamellar stack of chloroplasts and stabilizing chloroplast membranes under stress. However, the effects of lipid signaling targets in plants are not fully understood. This review focuses on the synthesis of various signaling lipids and their roles in abiotic stress tolerance responses, providing an essential perspective for further investigation into the interactions between plant lipids and abiotic stress.
- 10 August 2023
- Published by Frontiers Media SA in Frontiers in Plant Science
- Vol. 14, 1216835
Top Cited PapersOpen AccessDrought and heat stress mediated activation of lipid signaling in plants: a critical review
Lipids are a principal component of plasma membrane, acting as a protective barrier between the cell and its surroundings. Abiotic stresses such as drought and temperature induce various lipid-dependent signaling responses, and the membrane lipids respond differently to environmental challenges. Recent studies have revealed that lipids serve as signal mediators forreducing stress responses in plant cells and activating defense systems. Signaling lipids, such as phosphatidic acid, phosphoinositides, sphingolipids, lysophospholipids, oxylipins, and N-acylethanolamines, are generated in response to stress. Membrane lipids are essential for maintaining the lamellar stack of chloroplasts and stabilizing chloroplast membranes under stress. However, the effects of lipid signaling targets in plants are not fully understood. This review focuses on the synthesis of various signaling lipids and their roles in abiotic stress tolerance responses, providing an essential perspective for further investigation into the interactions between plant lipids and abiotic stress.
- Open Access
Putrescine Mitigates High Temperature Effects by Modulating Morpho-Physiological and Biochemical Attributes in Brassica juncea Seedlings
A variety of environmental issues are affecting crops all across the world, but rising temperatures are posing the greatest threat. High temperature has been found to drastically inhibit seedling emergence and cause leaf necrosis at the seedling stage, which results in poor plant stand and significantly decreased yields. Polyamines (PAs) are positively charged, low-molecular-weight aliphatic nitrogenous bases present in all living organisms and are involved in various biological processes in plant growth and development, including senescence and response to different abiotic stresses. Putrescine (Put) functions as a master growth regulator that promotes optimal plant development and greater stress tolerance. Here, the current study aimed to elucidate how Put (1 mM) functions in reducing the negative impacts of high temperature on four varieties of Brassica juncea (RH-1707, RH-1708, RH-1566 and RH-1999-42). Exposure of plants to high temperature resulted in decrease in growth parameters, chlorophyll content and relative water content. Simultaneously, increases were found in antioxidant enzymes, electrolyte leakage, lipid peroxidation, hydrogen peroxide content and stomatal density. High temperature more significantly affected varieties RH-1707 and RH-1708, while RH-1566 and RH-1999-42 showed lesser effects. Exogenous application of Put mitigated the negative impacts of high temperature by enhancing growth, chlorophyll content, relative water content and antioxidant enzyme activities and, simultaneously, it reduces oxidative damage and stomatal density. This study specifies that varieties RH-1707 and RH-1708 are sensitive whereas RH-1566 and RH-1999-42 are tolerant of high temperature and provides an insight into the effectiveness of Put in mitigating the effects of high temperature to a significant extent in B. juncea seedlings.
Open AccessPutrescine Mitigates High Temperature Effects by Modulating Morpho-Physiological and Biochemical Attributes in Brassica juncea Seedlings
A variety of environmental issues are affecting crops all across the world, but rising temperatures are posing the greatest threat. High temperature has been found to drastically inhibit seedling emergence and cause leaf necrosis at the seedling stage, which results in poor plant stand and significantly decreased yields. Polyamines (PAs) are positively charged, low-molecular-weight aliphatic nitrogenous bases present in all living organisms and are involved in various biological processes in plant growth and development, including senescence and response to different abiotic stresses. Putrescine (Put) functions as a master growth regulator that promotes optimal plant development and greater stress tolerance. Here, the current study aimed to elucidate how Put (1 mM) functions in reducing the negative impacts of high temperature on four varieties of Brassica juncea (RH-1707, RH-1708, RH-1566 and RH-1999-42). Exposure of plants to high temperature resulted in decrease in growth parameters, chlorophyll content and relative water content. Simultaneously, increases were found in antioxidant enzymes, electrolyte leakage, lipid peroxidation, hydrogen peroxide content and stomatal density. High temperature more significantly affected varieties RH-1707 and RH-1708, while RH-1566 and RH-1999-42 showed lesser effects. Exogenous application of Put mitigated the negative impacts of high temperature by enhancing growth, chlorophyll content, relative water content and antioxidant enzyme activities and, simultaneously, it reduces oxidative damage and stomatal density. This study specifies that varieties RH-1707 and RH-1708 are sensitive whereas RH-1566 and RH-1999-42 are tolerant of high temperature and provides an insight into the effectiveness of Put in mitigating the effects of high temperature to a significant extent in B. juncea seedlings.
- 23 May 2023
- Published by Taylor & Francis
- p. 45-84
Spintronic Technology Applications for Artificial Intelligence
Spintronics is one of the rising technologies with massive growth potential and has the capability to develop in the coming years, especially in the industrial market for AI applications. In spintronics or spin electronics, data are accumulated by using the spin property of electrons. Due to this property of electrons, there is a huge shift in device functionality. A lot of research work has been done and is still ongoing to enhance this property. Here, we use spin property, which solves the biggest issue which the world is facing today, that is, power consumption. With this new technology, there are many advantages like high speed, compact devices, less power consumption, reduced heat dissipation, and nonvolatility. In this chapter, we discuss the technology of spintronics. The applications of the different types of spintronic-based devices are quantum computer, data storage, industrial motors, MRAM, current sensor, magnetic sensor, and many more. This chapter covers the basic idea of spintronics, the working principle of spintronics, the different types or material used for the fabrication of devices, and the challenges which the researcher is facing. The different types of power-reducing techniques and devices are discussed along with the phenomena of spintronics like GMR, TMR, spin transfer torque, spin hall effect, etc. The main purpose of writing this chapter is to understand the basics of spintronic and spintronic devices, with their applications in AI.
- 23 May 2023
- Published by Taylor & Francis
- p. 45-84
Spintronic Technology Applications for Artificial Intelligence
Spintronics is one of the rising technologies with massive growth potential and has the capability to develop in the coming years, especially in the industrial market for AI applications. In spintronics or spin electronics, data are accumulated by using the spin property of electrons. Due to this property of electrons, there is a huge shift in device functionality. A lot of research work has been done and is still ongoing to enhance this property. Here, we use spin property, which solves the biggest issue which the world is facing today, that is, power consumption. With this new technology, there are many advantages like high speed, compact devices, less power consumption, reduced heat dissipation, and nonvolatility. In this chapter, we discuss the technology of spintronics. The applications of the different types of spintronic-based devices are quantum computer, data storage, industrial motors, MRAM, current sensor, magnetic sensor, and many more. This chapter covers the basic idea of spintronics, the working principle of spintronics, the different types or material used for the fabrication of devices, and the challenges which the researcher is facing. The different types of power-reducing techniques and devices are discussed along with the phenomena of spintronics like GMR, TMR, spin transfer torque, spin hall effect, etc. The main purpose of writing this chapter is to understand the basics of spintronic and spintronic devices, with their applications in AI.
- Open Access
- 5 September 2020
- Published by Technoscience Academy in International Journal of Scientific Research in Computer Science, Engineering and Information Technology
- p. 69-76
Identification and Recognition of facial images
Face detection is the power to identify a face and recognition is the ability to recognize whose face it is by means of facial characteristics. Face is multivariate and requires a lot of mathematical summation. Almost all imperative applications use a face recognition system. There are many methods that have been already proposed which provides low recognition rate. Hence, the main task of research is to develop a face recognition system with higher recognition capability and better accuracy. This paper proposes Face recognition system by combining two techniques Viola Jones and Principal Component Analysis. An approach of Eigen faces is employed in Principle Component Analysis(PCA). The face recognition system is implemented in MATLAB.
- 5 September 2020
- Published by Technoscience Academy in International Journal of Scientific Research in Computer Science, Engineering and Information Technology
- p. 69-76
Open AccessIdentification and Recognition of facial images
Face detection is the power to identify a face and recognition is the ability to recognize whose face it is by means of facial characteristics. Face is multivariate and requires a lot of mathematical summation. Almost all imperative applications use a face recognition system. There are many methods that have been already proposed which provides low recognition rate. Hence, the main task of research is to develop a face recognition system with higher recognition capability and better accuracy. This paper proposes Face recognition system by combining two techniques Viola Jones and Principal Component Analysis. An approach of Eigen faces is employed in Principle Component Analysis(PCA). The face recognition system is implemented in MATLAB.