Abdelgader M. Abdalla
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Abdelgader M. Abdalla has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- António Teixeira
IEETA, DETI, LASI, University of Aveiro, Aveiro, Portugal
5 shared publications - Isiaka Ajewale Alimi
University of Aveiro
4 shared publications - Ali Shahpari
Department of Electronics, Telecommunications and Informatics, University of Aveiro and Instituto de Telecomunicações, 3810-193, Aveiro, Portugal
2 shared publications - Issa Elfergani
Instituto de Telecomunicações, Campus Universitário de Santiago
2 shared publications - Jacklyn Dias Reis
Idea! Electronic Systems, Av. José Rocha Bonfim 214, 13080-650, Campinas, SP, Brazil
2 shared publications Jonathan Rodriguez
Universidade de Aveiro
2 shared publications
Latest Publications
- Open Access
- 6 April 2022
- Published by IntechOpen
Network-on-Chip Topologies: Potentials, Technical Challenges, Recent Advances and Research Direction
Integration technology advancement has impacted the System-on-Chip (SoC) in which heterogeneous cores are supported on a single chip. Based on the huge amount of supported heterogeneous cores, efficient communication between the associated processors has to be considered at all levels of the system design to ensure global interconnection. This can be achieved through a design-friendly, flexible, scalable, and high-performance interconnection architecture. It is noteworthy that the interconnections between multiple cores on a chip present a considerable influence on the performance and communication of the chip design regarding the throughput, end-to-end delay, and packets loss ratio. Although hierarchical architectures have addressed the majority of the associated challenges of the traditional interconnection techniques, the main limiting factor is scalability. Network-on-Chip (NoC) has been presented as a scalable and well-structured alternative solution that is capable of addressing communication issues in the on-chip systems. In this context, several NoC topologies have been presented to support various routing techniques and attend to different chip architectural requirements. This book chapter reviews some of the existing NoC topologies and their associated characteristics. Also, application mapping algorithms and some key challenges of NoC are considered.
- 6 April 2022
- Published by IntechOpen
Open AccessNetwork-on-Chip Topologies: Potentials, Technical Challenges, Recent Advances and Research Direction
Integration technology advancement has impacted the System-on-Chip (SoC) in which heterogeneous cores are supported on a single chip. Based on the huge amount of supported heterogeneous cores, efficient communication between the associated processors has to be considered at all levels of the system design to ensure global interconnection. This can be achieved through a design-friendly, flexible, scalable, and high-performance interconnection architecture. It is noteworthy that the interconnections between multiple cores on a chip present a considerable influence on the performance and communication of the chip design regarding the throughput, end-to-end delay, and packets loss ratio. Although hierarchical architectures have addressed the majority of the associated challenges of the traditional interconnection techniques, the main limiting factor is scalability. Network-on-Chip (NoC) has been presented as a scalable and well-structured alternative solution that is capable of addressing communication issues in the on-chip systems. In this context, several NoC topologies have been presented to support various routing techniques and attend to different chip architectural requirements. This book chapter reviews some of the existing NoC topologies and their associated characteristics. Also, application mapping algorithms and some key challenges of NoC are considered.
- Open Access
- 30 October 2019
- Published by IntechOpen
Enabling Optical Wired and Wireless Technologies for 5G and Beyond Networks
The emerging fifth-generation mobile communications are envisaged to support massive number of deployment scenarios based on the respective use case requirements. The requirements can be efficiently attended with ultradense small-cell cloud radio access network (C-RAN) approach. However, the C-RAN architecture imposes stringent requirements on the transport networks. This book chapter presents high-capacity and low-latency optical wired and wireless networking solutions that are capable of attending to the network demands. Meanwhile, with optical communication evolutions, there has been advent of enhanced photonic integrated circuits (PICs). The PICs are capable of offering advantages such as low-power consumption, high-mechanical stability, low footprint, small dimension, enhanced functionalities, and ease of complex system architectures. Consequently, we exploit the PICs capabilities in designing and developing the physical layer architecture of the second standard of the next-generation passive optical network (NG-PON2) system. Apart from being capable of alleviating the associated losses of the transceiver, the proposed architectures aid in increasing the system power budget. Moreover, its implementation can significantly help in reducing the optical-electrical-optical conversions issue and the required number of optical connections, which are part of the main problems being faced in the miniaturization of network elements. Additionally, we present simulation results for the model validation.
- 30 October 2019
- Published by IntechOpen
Open AccessEnabling Optical Wired and Wireless Technologies for 5G and Beyond Networks
The emerging fifth-generation mobile communications are envisaged to support massive number of deployment scenarios based on the respective use case requirements. The requirements can be efficiently attended with ultradense small-cell cloud radio access network (C-RAN) approach. However, the C-RAN architecture imposes stringent requirements on the transport networks. This book chapter presents high-capacity and low-latency optical wired and wireless networking solutions that are capable of attending to the network demands. Meanwhile, with optical communication evolutions, there has been advent of enhanced photonic integrated circuits (PICs). The PICs are capable of offering advantages such as low-power consumption, high-mechanical stability, low footprint, small dimension, enhanced functionalities, and ease of complex system architectures. Consequently, we exploit the PICs capabilities in designing and developing the physical layer architecture of the second standard of the next-generation passive optical network (NG-PON2) system. Apart from being capable of alleviating the associated losses of the transceiver, the proposed architectures aid in increasing the system power budget. Moreover, its implementation can significantly help in reducing the optical-electrical-optical conversions issue and the required number of optical connections, which are part of the main problems being faced in the miniaturization of network elements. Additionally, we present simulation results for the model validation.
- 30 December 2018
- Published by Springer Nature
- p. 289-298
Fast Statistical Modelling of Temperature Variation on 28 nm FDSOI Technology
- 30 December 2018
- Published by Springer Nature
- p. 289-298
Fast Statistical Modelling of Temperature Variation on 28 nm FDSOI Technology
- Open Access
- 13 December 2017
- Published by European Alliance for Innovation n.o. in EAI Endorsed Transactions on Cognitive Communications
- Vol. 3 (12)
Reconfigurable Microstrip Printed Patch Antenna for Future Cognitive Radio Applications
A family of compact microstrip antennas are presented targeting applications such as Long-Term Evolution (LTE), Wireless Local Area Networks (WLAN), Universal Mobile Telecommunications system (UMTS), Global System Mobile (GSM) and global positioning system (GPS). These antennas consist of a rectangular shaped structure printed over FR4 substrate. The antenna occupies a small volume of 70x54x1.6mm 3. A 50-Ohm strip line was used to feed the proposed antennas. For miniaturization purposes, an I-shaped slot was inserted in the appropriate location on the radiator resulting in the second version (antenna with I-shaped slot). The integration of the slot helped towards shifting the resonant frequency downwards, which potentially created an additional resonant frequency to cover the WLAN2400MHz, but this resonant frequency is still static in nature. Thus, tuning mechanisms were introduced to tune the resonant frequency over a wide continuous frequency range. A lumped capacitor was firstly used as the tuning approach, in which its capacitance was varied from 0.5pF to 3pF , covering the frequency range from 2300MHz to 1500MHz. Secondly, the varactor diode was exploited to verify this; by changing the bias voltage across the varactor from 0.21V to 12.9V, the antenna operates over the targeted range from 1500MHz to 2300MHz. Both the simulated and measured results show a stable performance. The proposed antenna may be suitable for future cognitive radio system.
- 13 December 2017
- Published by European Alliance for Innovation n.o. in EAI Endorsed Transactions on Cognitive Communications
- Vol. 3 (12)
Open AccessReconfigurable Microstrip Printed Patch Antenna for Future Cognitive Radio Applications
A family of compact microstrip antennas are presented targeting applications such as Long-Term Evolution (LTE), Wireless Local Area Networks (WLAN), Universal Mobile Telecommunications system (UMTS), Global System Mobile (GSM) and global positioning system (GPS). These antennas consist of a rectangular shaped structure printed over FR4 substrate. The antenna occupies a small volume of 70x54x1.6mm 3. A 50-Ohm strip line was used to feed the proposed antennas. For miniaturization purposes, an I-shaped slot was inserted in the appropriate location on the radiator resulting in the second version (antenna with I-shaped slot). The integration of the slot helped towards shifting the resonant frequency downwards, which potentially created an additional resonant frequency to cover the WLAN2400MHz, but this resonant frequency is still static in nature. Thus, tuning mechanisms were introduced to tune the resonant frequency over a wide continuous frequency range. A lumped capacitor was firstly used as the tuning approach, in which its capacitance was varied from 0.5pF to 3pF , covering the frequency range from 2300MHz to 1500MHz. Secondly, the varactor diode was exploited to verify this; by changing the bias voltage across the varactor from 0.21V to 12.9V, the antenna operates over the targeted range from 1500MHz to 2300MHz. Both the simulated and measured results show a stable performance. The proposed antenna may be suitable for future cognitive radio system.
- 15 February 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 29 (7) , 583-586
Spatial Interpolated Lookup Tables (LUTs) Models for Ergodic Capacity of MIMO FSO Systems
We propose low complexity, adaptive multivariate precomputed B-spline and Barycentric Lagrange interpolation-based lookup table (B2LUT) models for the estimation of channel capacity of multiple-input-multiple-output free-space optical communication systems over generalized Málaga (M)-distributed atmospheric turbulence channels. The models require low memory for efficient operation and exploit precomputed weights to achieve fast and stable operation. The models can significantly reduce the size of lookup table, thereby reducing the computational cost. Similarly, the models can enhance the speed by up to 15 orders of magnitude and beyond without loss of fidelity compared with the current analytical models.
- 15 February 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 29 (7) , 583-586
Spatial Interpolated Lookup Tables (LUTs) Models for Ergodic Capacity of MIMO FSO Systems
We propose low complexity, adaptive multivariate precomputed B-spline and Barycentric Lagrange interpolation-based lookup table (B2LUT) models for the estimation of channel capacity of multiple-input-multiple-output free-space optical communication systems over generalized Málaga (M)-distributed atmospheric turbulence channels. The models require low memory for efficient operation and exploit precomputed weights to achieve fast and stable operation. The models can significantly reduce the size of lookup table, thereby reducing the computational cost. Similarly, the models can enhance the speed by up to 15 orders of magnitude and beyond without loss of fidelity compared with the current analytical models.
- 1 September 2014
- Published by Elsevier in Optics Communications
- Vol. 326, 88-93
Improved nonlinear tolerance in ultra-dense WDM OFDM systems
- 1 September 2014
- Published by Elsevier in Optics Communications
- Vol. 326, 88-93
Improved nonlinear tolerance in ultra-dense WDM OFDM systems
- 4 May 2014
- Published by Taylor & Francis in Fiber and Integrated Optics
- Vol. 33 (3) , 149-162
Ultra-High-Capacity Passive Optical Network Systems with Free-Space Optical Communications
- 4 May 2014
- Published by Taylor & Francis in Fiber and Integrated Optics
- Vol. 33 (3) , 149-162
Ultra-High-Capacity Passive Optical Network Systems with Free-Space Optical Communications