Gaurav Tatrari
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Gaurav Tatrari has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Faiz Ullah Shah
Luleå University of Technology
6 shared publications Faiz Ullah Shah
Chemistry of Interfaces Luleå University of Technology Luleå Sweden
5 shared publicationsMukhtiar Ahmed
Department of Industrial and Materials Science Chalmers University of Technology Gothenburg Sweden
4 shared publicationsRong An
School of Materials Science and Engineering Herbert Gleiter Institute of Nanoscience, Nanjing University of Science and Technology Nanjing China
4 shared publications- Nanda Gopal Sahoo
PRS-NSNT Centre, Department of Chemistry, D.S.B. Campus, Kumaun University, Nainital, Uttarakhand-263002, India
3 shared publications Andrei Filippov
Chemistry of Interfaces Luleå University of Technology Luleå Sweden
2 shared publications
Latest Publications
- Open Access
- 17 July 2026
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (7) , e70405
Triazine‐Anion‐Based Fluorine‐Free Ionic Liquids and Lithium Battery Electrolytes With Flexible Cations
Herein, we introduce fluorine‐free ionic liquids (ILs) and electrolytes based on electron‐deficient triazine, 4,6‐Diethoxy‐2‐Oxo‐2H‐1,3,5‐Triazin‐5‐ide, (DET), ‐anion coupled with oligoether‐functionalized pyrrolidinium and imidazolium cations. Having the same anion, imidazolium IL show slightly better thermal and electrochemical stabilities, but lower ion transport and higher glass transition temperature, T g , compared to its pyrrolidinium analog. Doping neat ILs with 20% lithium DET salt and creating lithium‐conducting electrolytes increases the overall thermal and electrochemical stabilities but decreases the ion mobilities. As the lithium battery electrolyte, Li∥Li symmetric cells confirm stable and reversible Li cycling for both electrolytes, with the imidazolium system showing lower polarization and midpoint hysteresis, indicating faster interfacial kinetics and reduced resistance; correspondingly, it also delivers narrower charge–discharge plateaus and improved voltage stability in Li∥LFP half‐cells. For imidazolinium‐based electrolytes, with the addition of 5 wt% vinylene carbonate (VC), the Li∥LFP cells exhibited excellent rate capability from 0.1C to 1C at 60 °C and maintained stable cycling around 200 cycles at 0.1C with nearly 99% capacity retention and coulombic efficiency, demonstrating enhanced interfacial stability and efficient lithium‐ion transport.
- 17 July 2026
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (7) , e70405
Open AccessTriazine‐Anion‐Based Fluorine‐Free Ionic Liquids and Lithium Battery Electrolytes With Flexible Cations
Herein, we introduce fluorine‐free ionic liquids (ILs) and electrolytes based on electron‐deficient triazine, 4,6‐Diethoxy‐2‐Oxo‐2H‐1,3,5‐Triazin‐5‐ide, (DET), ‐anion coupled with oligoether‐functionalized pyrrolidinium and imidazolium cations. Having the same anion, imidazolium IL show slightly better thermal and electrochemical stabilities, but lower ion transport and higher glass transition temperature, T g , compared to its pyrrolidinium analog. Doping neat ILs with 20% lithium DET salt and creating lithium‐conducting electrolytes increases the overall thermal and electrochemical stabilities but decreases the ion mobilities. As the lithium battery electrolyte, Li∥Li symmetric cells confirm stable and reversible Li cycling for both electrolytes, with the imidazolium system showing lower polarization and midpoint hysteresis, indicating faster interfacial kinetics and reduced resistance; correspondingly, it also delivers narrower charge–discharge plateaus and improved voltage stability in Li∥LFP half‐cells. For imidazolinium‐based electrolytes, with the addition of 5 wt% vinylene carbonate (VC), the Li∥LFP cells exhibited excellent rate capability from 0.1C to 1C at 60 °C and maintained stable cycling around 200 cycles at 0.1C with nearly 99% capacity retention and coulombic efficiency, demonstrating enhanced interfacial stability and efficient lithium‐ion transport.
- 2 June 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (43) , 29337-29353
Graphene-like carbon fibres derived from cotton waste for high-performance supercapacitors: computational and experimental investigation
A cotton waste-derived graphene-like carbon fibre (GLCF)-based supercapacitor exhibited a wide working window potential with decent electrochemical performance.
- 2 June 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (43) , 29337-29353
Graphene-like carbon fibres derived from cotton waste for high-performance supercapacitors: computational and experimental investigation
A cotton waste-derived graphene-like carbon fibre (GLCF)-based supercapacitor exhibited a wide working window potential with decent electrochemical performance.
- Open Access
- 4 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (6) , 3100-3115
Fluorine-Free Cyclic Carboxylate Ionic Liquids as Supercapacitor Electrolytes
- 4 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (6) , 3100-3115
Open AccessFluorine-Free Cyclic Carboxylate Ionic Liquids as Supercapacitor Electrolytes
- Open Access
- 7 December 2025
- Published by Wiley in Energy Storage
- Vol. 7 (8)
High‐Temperature Supercapacitors Enabled by Fluorine‐Free Ionic Liquid and Synergistic Alkali‐Doped Graphene Oxides
This study explores the synthesis and electrochemical performance of graphene oxide co‐doped with sodium and potassium (Na–K–GO) as electrode materials for supercapacitors (SCs) designed to operate at 60°C over an extended voltage window. The Na–K–GO is employed as the electrode material, while a fluorine‐free ionic liquid (IL), [P 4444 ][MEEA]—comprising a tetrabutylphosphonium cation and a 2‐2‐(2‐methoxyethoxy)ethoxy anion—served as the electrolyte, enabling stable operation over a wide voltage window at elevated temperatures. Using this combination, three coin‐cell SCs are fabricated: two symmetric devices (SC‐1 and SC‐2) and one asymmetric device (SC‐3). All the three exhibited remarkable charge storage abilities, a retaining performance over 10 000 charge–discharge cycles at 60°C. Among the three devices, SC‐3 exhibited the best overall electrochemical performance, delivering a high specific capacitance of 47.01 F g −1 and an energy density of 27.77 Wh kg −1 at 0.5 A g −1 . Even at a higher current density of 1 A g −1 , SC‐3 maintained a maximum power density of 1000 W kg −1 while sustaining an energy density of 14.21 Wh kg −1 , reflecting its strong rate capability. Moreover, the long‐term cycling tests at 2 A g −1 demonstrated an outstanding durability of SC‐3, which retained 99% coulombic efficiency after 10 000 cycles, significantly outperforming the SC‐2 (90%) and SC‐1 (79%).
- 7 December 2025
- Published by Wiley in Energy Storage
- Vol. 7 (8)
Open AccessHigh‐Temperature Supercapacitors Enabled by Fluorine‐Free Ionic Liquid and Synergistic Alkali‐Doped Graphene Oxides
This study explores the synthesis and electrochemical performance of graphene oxide co‐doped with sodium and potassium (Na–K–GO) as electrode materials for supercapacitors (SCs) designed to operate at 60°C over an extended voltage window. The Na–K–GO is employed as the electrode material, while a fluorine‐free ionic liquid (IL), [P 4444 ][MEEA]—comprising a tetrabutylphosphonium cation and a 2‐2‐(2‐methoxyethoxy)ethoxy anion—served as the electrolyte, enabling stable operation over a wide voltage window at elevated temperatures. Using this combination, three coin‐cell SCs are fabricated: two symmetric devices (SC‐1 and SC‐2) and one asymmetric device (SC‐3). All the three exhibited remarkable charge storage abilities, a retaining performance over 10 000 charge–discharge cycles at 60°C. Among the three devices, SC‐3 exhibited the best overall electrochemical performance, delivering a high specific capacitance of 47.01 F g −1 and an energy density of 27.77 Wh kg −1 at 0.5 A g −1 . Even at a higher current density of 1 A g −1 , SC‐3 maintained a maximum power density of 1000 W kg −1 while sustaining an energy density of 14.21 Wh kg −1 , reflecting its strong rate capability. Moreover, the long‐term cycling tests at 2 A g −1 demonstrated an outstanding durability of SC‐3, which retained 99% coulombic efficiency after 10 000 cycles, significantly outperforming the SC‐2 (90%) and SC‐1 (79%).
- Open Access
- 4 December 2025
- Published by Royal Society of Chemistry (RSC) in Energy Advances
- Vol. 4 (12) , 1476-1485
Fluorine-free dialkylphosphate-based ionic liquids as supercapacitor electrolytes
We introduce several fluorine-free ionic liquids (ILs) comprising dialkylphosphate anions coupled to pyrrolidinium, piperidinium, and pyridinium cations. These ILs exhibit promising performance as supercapacitor electrolytes.
- 4 December 2025
- Published by Royal Society of Chemistry (RSC) in Energy Advances
- Vol. 4 (12) , 1476-1485
Open AccessFluorine-free dialkylphosphate-based ionic liquids as supercapacitor electrolytes
We introduce several fluorine-free ionic liquids (ILs) comprising dialkylphosphate anions coupled to pyrrolidinium, piperidinium, and pyridinium cations. These ILs exhibit promising performance as supercapacitor electrolytes.
- Open Access
- 5 November 2024
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 12 (46) , 16896-16904
Sweet Ionic Liquids as High-Temperature and High-Voltage Supercapacitor Electrolytes
- 5 November 2024
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 12 (46) , 16896-16904
Open AccessSweet Ionic Liquids as High-Temperature and High-Voltage Supercapacitor Electrolytes
- 28 May 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (23) , 12017-12026
Quantifying and Decoupling Molecular Interactions of Ionic Liquids with Gold Electrodes
This work combined gold colloid probe atomic force microscopy (AFM) with a quartz crystal microbalance (QCM) to accurately quantify the molecular interactions of fluorine-free phosphonium-based ionic liquids (ILs) with gold electrode surfaces. First, the interactions of ILs with the gold electrode per unit area (, N/m2) were obtained via the force-distance curves measured by gold probe AFM. Second, a QCM was employed to detect the IL amount to acquire the equilibrium number of IL molecules adsorbed onto the gold electrode per unit area (NIL, Num/m2). Finally, the quantified molecular interactions of ILs with the gold electrode (F0, nN/Num) were estimated. F0 is closely related to the IL composition, in which the IL with the same anion but a longer phosphonium cation exhibits a stronger molecular interaction. The changes in the quantified interactions of gold with different ILs are consistent with the interactions predicted by the extended Derjaguin-Landau-Verwey-Overbeek theory, and the van der Waals interaction was identified as the major contribution of the overall interaction. The quantified molecular interaction is expected to enable the direct experimental-derived interaction parameters for molecular simulations and provide the virtual design of novel ILs for energy storage applications.- 28 May 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (23) , 12017-12026
Quantifying and Decoupling Molecular Interactions of Ionic Liquids with Gold Electrodes
This work combined gold colloid probe atomic force microscopy (AFM) with a quartz crystal microbalance (QCM) to accurately quantify the molecular interactions of fluorine-free phosphonium-based ionic liquids (ILs) with gold electrode surfaces. First, the interactions of ILs with the gold electrode per unit area (, N/m2) were obtained via the force-distance curves measured by gold probe AFM. Second, a QCM was employed to detect the IL amount to acquire the equilibrium number of IL molecules adsorbed onto the gold electrode per unit area (NIL, Num/m2). Finally, the quantified molecular interactions of ILs with the gold electrode (F0, nN/Num) were estimated. F0 is closely related to the IL composition, in which the IL with the same anion but a longer phosphonium cation exhibits a stronger molecular interaction. The changes in the quantified interactions of gold with different ILs are consistent with the interactions predicted by the extended Derjaguin-Landau-Verwey-Overbeek theory, and the van der Waals interaction was identified as the major contribution of the overall interaction. The quantified molecular interaction is expected to enable the direct experimental-derived interaction parameters for molecular simulations and provide the virtual design of novel ILs for energy storage applications.- 21 May 2024
- Published by Springer Nature
- p. 217-239
Electrochemistry and Energy Storage Applications of Graphene and Its Derivatives
- 21 May 2024
- Published by Springer Nature
- p. 217-239
Electrochemistry and Energy Storage Applications of Graphene and Its Derivatives
- Open Access
- 26 April 2024
- Published by Elsevier in Coordination Chemistry Reviews
- Vol. 512
Designed metal-organic framework composites for metal-ion batteries and metal-ion capacitors
- 26 April 2024
- Published by Elsevier in Coordination Chemistry Reviews
- Vol. 512
Open AccessDesigned metal-organic framework composites for metal-ion batteries and metal-ion capacitors
- Open Access
- 23 November 2023
- Published by Wiley in Energy Storage
- Vol. 6 (1)
Charge storage performance of a structurally flexible hybrid ionic liquid electrolyte
The electrochemical and charge storage performance of a fluorine‐free structurally flexible hybrid pyrrolidinium‐based ionic liquid electrolyte (HILE) in a symmetric graphite‐based supercapacitor is thoroughly investigated. The HILE revealed thermal decomposition at above 230°C, a glass transition (Tg) temperature of below −70°C, and ionic conductivity of 0.16 mS cm−1 at 30°C. The chemical and electrochemical properties are investigated using a systematic variable temperature 1H and 31P NMR spectroscopy and diffusometry, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge‐discharge (GCD). The supercapacitor demonstrated a notable specific capacitance of 186 F g−1 at a scan rate of 1 mV s−1 and a specific capacitance of 122 F g−1 at a current density of 0.5 A g−1. The maximum energy density of 48.8 Wh kg−1, a power density of 450 W kg−1 at a current density of 0.5 A g−1, and a potential window of 4 V were obtained. Altogether, this study demonstrates that the new HILE can be used in symmetric graphite‐based supercapacitors over a wide potential window of 4 V and a temperature range from −20°C to 90°C.
- 23 November 2023
- Published by Wiley in Energy Storage
- Vol. 6 (1)
Open AccessCharge storage performance of a structurally flexible hybrid ionic liquid electrolyte
The electrochemical and charge storage performance of a fluorine‐free structurally flexible hybrid pyrrolidinium‐based ionic liquid electrolyte (HILE) in a symmetric graphite‐based supercapacitor is thoroughly investigated. The HILE revealed thermal decomposition at above 230°C, a glass transition (Tg) temperature of below −70°C, and ionic conductivity of 0.16 mS cm−1 at 30°C. The chemical and electrochemical properties are investigated using a systematic variable temperature 1H and 31P NMR spectroscopy and diffusometry, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge‐discharge (GCD). The supercapacitor demonstrated a notable specific capacitance of 186 F g−1 at a scan rate of 1 mV s−1 and a specific capacitance of 122 F g−1 at a current density of 0.5 A g−1. The maximum energy density of 48.8 Wh kg−1, a power density of 450 W kg−1 at a current density of 0.5 A g−1, and a potential window of 4 V were obtained. Altogether, this study demonstrates that the new HILE can be used in symmetric graphite‐based supercapacitors over a wide potential window of 4 V and a temperature range from −20°C to 90°C.