Selin Bulut
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Selin Bulut has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Andrij Pich
Chair of Functional and Interactive Polymers, Institute of Technical and Macromolecular Chemistry, RWTH Aachen University, Worringerweg 2, 52074 Aachen, Germany
7 shared publications - Laura De Laporte
DWI – Leibniz Institute for Interactive Materials
4 shared publications - Thomas Bissing
DWI‐Leibniz Institute for Interactive Materials e. V. Aachen Germany
3 shared publications - Dan Eugen Demco
DWI − Leibniz‐Institute for Interactive Materials e.V. Aachen Germany
2 shared publications Daniel Günther
DWI‐Leibniz Institute for Interactive Materials e. V. Aachen Germany
2 shared publications- Maria Isabell Pieper
Institute of Technical and Macromolecular Chemistry RWTH Aachen University Aachen Germany
2 shared publications
Latest Publications
- Open Access
- 14 March 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (20) , e19972
Oxygen‐Inhibition Driven Compartmentalization of Dextran Microgels: Toward Fusible Colloidal Biomaterial Inks for 3D Printing
This study presents a facile and versatile method to synthesize tailored, compartmentalized, polysaccharide‐based microgels, with ultra‐low crosslinked shells for the development of self‐setting colloidal biomaterial inks. Compartmentalization is achieved by exploiting spatially controlled oxygen‐inhibition of the crosslinking process in droplets obtained by droplet‐based microfluidics, leading to physically distinct core and shell regions inside dextran microgels. The shell exhibits a markedly lower cross‐linking density, resulting in reduced stiffness, tunable degradation, and higher macromolecular permeability than the core. The facile control of the core‐to‐shell ratio by varying the initiator concentration and oxygen availability represents a novel strategy to engineer microgel compartmentalization. This work establishes oxygen‐controlled photopolymerization as a new design principle for structuring microgels in flow, offering precise spatial control over polymer network architecture without complex templating or multi‐phase emulsions. Beyond dextran, this concept is broadly applicable to other acrylated and methacrylated hydrogel systems, opening new avenues for designing hierarchical soft materials. We demonstrate the applicability of these advanced microgels for the fabrication of millimeter‐sized tissue constructs, via 3D printing by exploiting the fusion of ultra‐low crosslinked shell compartments, thereby eliminating the need for additional chemical crosslinkers, initiators, or support baths to stabilize the final printed constructs.
- 14 March 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (20) , e19972
Open AccessOxygen‐Inhibition Driven Compartmentalization of Dextran Microgels: Toward Fusible Colloidal Biomaterial Inks for 3D Printing
This study presents a facile and versatile method to synthesize tailored, compartmentalized, polysaccharide‐based microgels, with ultra‐low crosslinked shells for the development of self‐setting colloidal biomaterial inks. Compartmentalization is achieved by exploiting spatially controlled oxygen‐inhibition of the crosslinking process in droplets obtained by droplet‐based microfluidics, leading to physically distinct core and shell regions inside dextran microgels. The shell exhibits a markedly lower cross‐linking density, resulting in reduced stiffness, tunable degradation, and higher macromolecular permeability than the core. The facile control of the core‐to‐shell ratio by varying the initiator concentration and oxygen availability represents a novel strategy to engineer microgel compartmentalization. This work establishes oxygen‐controlled photopolymerization as a new design principle for structuring microgels in flow, offering precise spatial control over polymer network architecture without complex templating or multi‐phase emulsions. Beyond dextran, this concept is broadly applicable to other acrylated and methacrylated hydrogel systems, opening new avenues for designing hierarchical soft materials. We demonstrate the applicability of these advanced microgels for the fabrication of millimeter‐sized tissue constructs, via 3D printing by exploiting the fusion of ultra‐low crosslinked shell compartments, thereby eliminating the need for additional chemical crosslinkers, initiators, or support baths to stabilize the final printed constructs.
- Open Access
- 19 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Oxygen-Inhibition Driven Compartmentalization of Dextran Microgels: Towards Fusible Colloidal Biomaterial Inks for 3D Printing
This study presents a facile and versatile method to synthesize tailored, compartmentalized, polysaccharide-based microgels, with ultra-low crosslinked shells for the development of self-setting colloidal biomaterial inks. Compartmentalization is achieved by exploiting spatially controlled oxygen-inhibition of the crosslinking process in droplets obtained by droplet-based microfluidics, leading to physically distinct core and shell regions inside dextran microgels. The shell exhibits a markedly lower cross-linking density, resulting in reduced stiffness, faster degradation, and higher macromolecular permeability than the core. The facile control over the core-to-shell ratio through variations in initiator concentration and oxygen availability represents a novel strategy to engineer microgel compartmentalization This work establishes oxygen-controlled photopolymerization as a new design principle for structuring microgels in flow, offering precise spatial control over polymer network architecture without complex templating or multi-phase emulsions. Beyond dextran, this concept is broadly applicable to other acrylated and methacrylated hydrogel systems, opening new avenues for designing hierarchical soft materials. We demonstrate the applicability of these advanced microgels for the fabrication of millimeter-sized tissue constructs, via 3D printing by exploiting the fusion of ultra-low crosslinked shell compartments, thereby eliminating the need for additional chemical crosslinkers, initiators, or support baths to stabilize the final printed constructs.
- 19 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessOxygen-Inhibition Driven Compartmentalization of Dextran Microgels: Towards Fusible Colloidal Biomaterial Inks for 3D Printing
This study presents a facile and versatile method to synthesize tailored, compartmentalized, polysaccharide-based microgels, with ultra-low crosslinked shells for the development of self-setting colloidal biomaterial inks. Compartmentalization is achieved by exploiting spatially controlled oxygen-inhibition of the crosslinking process in droplets obtained by droplet-based microfluidics, leading to physically distinct core and shell regions inside dextran microgels. The shell exhibits a markedly lower cross-linking density, resulting in reduced stiffness, faster degradation, and higher macromolecular permeability than the core. The facile control over the core-to-shell ratio through variations in initiator concentration and oxygen availability represents a novel strategy to engineer microgel compartmentalization This work establishes oxygen-controlled photopolymerization as a new design principle for structuring microgels in flow, offering precise spatial control over polymer network architecture without complex templating or multi-phase emulsions. Beyond dextran, this concept is broadly applicable to other acrylated and methacrylated hydrogel systems, opening new avenues for designing hierarchical soft materials. We demonstrate the applicability of these advanced microgels for the fabrication of millimeter-sized tissue constructs, via 3D printing by exploiting the fusion of ultra-low crosslinked shell compartments, thereby eliminating the need for additional chemical crosslinkers, initiators, or support baths to stabilize the final printed constructs.
- 21 March 2025
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 26 (4) , 2331-2343
Hybrid Pectin-Fibroin Microgels with Supramolecular and Covalent Cross-Links
Sugar beet pectin, an anionic polysaccharide, and silk fibroin, a high molecular weight protein, undergo gelation through ionic interactions and conformational changes, leading to hydrogel formation. Although many studies have focused on bulk gel systems involving polysaccharides and proteins, more research is needed to investigate their properties at the microscale level. In this context, we have developed a microgel system based on a pectin/fibroin combination and investigated its properties. We focused on two gelation mechanisms: physical cross-linking and enzymatic covalent cross-linking. The pectin/fibroin microgels were fabricated using droplet-based microfluidics, and the secondary structure, mechanical properties, and degradation profiles were investigated. Our experimental results show that the microgels exhibit an ordered β-sheet structure, a Young's modulus in the range of 10 to 20 kPa, and that degradation can be promoted using protease enzymes. Finally, the biocompatibility of the microgels is assessed using the Alamar Blue cell viability assay with human pulmonary fibroblasts (HPFs). This research presents a highly functional hybrid biomaterial produced from waste products and a structural protein, demonstrating its cell compatibility and potential in tissue engineering applications.
- 21 March 2025
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 26 (4) , 2331-2343
Hybrid Pectin-Fibroin Microgels with Supramolecular and Covalent Cross-Links
Sugar beet pectin, an anionic polysaccharide, and silk fibroin, a high molecular weight protein, undergo gelation through ionic interactions and conformational changes, leading to hydrogel formation. Although many studies have focused on bulk gel systems involving polysaccharides and proteins, more research is needed to investigate their properties at the microscale level. In this context, we have developed a microgel system based on a pectin/fibroin combination and investigated its properties. We focused on two gelation mechanisms: physical cross-linking and enzymatic covalent cross-linking. The pectin/fibroin microgels were fabricated using droplet-based microfluidics, and the secondary structure, mechanical properties, and degradation profiles were investigated. Our experimental results show that the microgels exhibit an ordered β-sheet structure, a Young's modulus in the range of 10 to 20 kPa, and that degradation can be promoted using protease enzymes. Finally, the biocompatibility of the microgels is assessed using the Alamar Blue cell viability assay with human pulmonary fibroblasts (HPFs). This research presents a highly functional hybrid biomaterial produced from waste products and a structural protein, demonstrating its cell compatibility and potential in tissue engineering applications.
- Open Access
- 25 July 2024
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 20 (31) , 6231-6246
Engineering poly(dehydroalanine)-based gels via droplet-based microfluidics: from bulk to microspheres
By adapting existing bulk gelation protocols to droplet-based microfluidics, polyampholyte poly(dehydroalanine)-based microspheres were fabricated and evaluated regarding biomedical application.
- 25 July 2024
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 20 (31) , 6231-6246
Open AccessEngineering poly(dehydroalanine)-based gels via droplet-based microfluidics: from bulk to microspheres
By adapting existing bulk gelation protocols to droplet-based microfluidics, polyampholyte poly(dehydroalanine)-based microspheres were fabricated and evaluated regarding biomedical application.
- 29 May 2024
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 25 (6) , 3807-3822
Microgels with Immobilized Glycosyltransferases for Enzymatic Glycan Synthesis
Glycans, composed of linked monosaccharides, play crucial roles in biology and find diverse applications. Enhancing their enzymatic synthesis can be achieved by immobilizing enzymes on materials such as microgels. Here, we present microgels with immobilized glycosyltransferases, synthesized through droplet microfluidics, immobilizing enzymes either via encapsulation or postattachment. SpyTag-SpyCatcher interaction was used for enzyme binding, among others. Fluorescamine and permeability assays confirmed enzyme immobilization and microgel porosity, while enzymatic activities were determined using HPLC. The potential application of microgels in cascade reactions involving multiple enzymes was demonstrated by combining β4GalT and α3GalT in an enzymatic reaction with high yields. Moreover, a cascade of β4GalT and β3GlcNAcT was successfully implemented. These results pave the way toward a modular membrane bioreactor for automated glycan synthesis containing the presented biocatalytic microgels.
- 29 May 2024
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 25 (6) , 3807-3822
Microgels with Immobilized Glycosyltransferases for Enzymatic Glycan Synthesis
Glycans, composed of linked monosaccharides, play crucial roles in biology and find diverse applications. Enhancing their enzymatic synthesis can be achieved by immobilizing enzymes on materials such as microgels. Here, we present microgels with immobilized glycosyltransferases, synthesized through droplet microfluidics, immobilizing enzymes either via encapsulation or postattachment. SpyTag-SpyCatcher interaction was used for enzyme binding, among others. Fluorescamine and permeability assays confirmed enzyme immobilization and microgel porosity, while enzymatic activities were determined using HPLC. The potential application of microgels in cascade reactions involving multiple enzymes was demonstrated by combining β4GalT and α3GalT in an enzymatic reaction with high yields. Moreover, a cascade of β4GalT and β3GlcNAcT was successfully implemented. These results pave the way toward a modular membrane bioreactor for automated glycan synthesis containing the presented biocatalytic microgels.
- Open Access
- 28 November 2023
- Published by Wiley in Advanced Healthcare Materials
- Vol. 13 (25) , e2302957
Cellular Architects at Work: Cells Building their Own Microgel Houses
Microporous annealed particle (MAP) scaffolds are investigated for their application as injectable 3D constructs in the field of regenerative medicine and tissue repair. While available MAP scaffolds provide a stable interlinked matrix of microgels for cell culture, the infiltration depth and space for cells to grow inside the scaffolds is pre‐determined by the void fraction during the assembly. In the case of MAP scaffolds fabricated from interlinked spherical microgels, a cellularity gradient can be observed with the highest cell density on the scaffold surface. Additionally, the interlinked microgel network limits the ability of cells to remodel their environment, which contradicts native tissue dynamics. In this work, a cell‐induced interlinking method for MAP scaffold formation is established, which avoids the necessity of chemical crosslinkers and pre‐engineered pores to achieve micro‐ or macropores in these 3D frameworks. This method enables cells to self‐organize with microgels into dynamic tissue constructs, which can be further controlled by altering the microgel properties, the cell/microgel ratio, and well shape. To form a cell‐induced interlinked scaffold, the cells are mixed with dextran‐based microgels and function as a glue between the microgels, resulting in a more homogenous cell distribution throughout the scaffold with efficient cell–cell interactions.
- 28 November 2023
- Published by Wiley in Advanced Healthcare Materials
- Vol. 13 (25) , e2302957
Open AccessCellular Architects at Work: Cells Building their Own Microgel Houses
Microporous annealed particle (MAP) scaffolds are investigated for their application as injectable 3D constructs in the field of regenerative medicine and tissue repair. While available MAP scaffolds provide a stable interlinked matrix of microgels for cell culture, the infiltration depth and space for cells to grow inside the scaffolds is pre‐determined by the void fraction during the assembly. In the case of MAP scaffolds fabricated from interlinked spherical microgels, a cellularity gradient can be observed with the highest cell density on the scaffold surface. Additionally, the interlinked microgel network limits the ability of cells to remodel their environment, which contradicts native tissue dynamics. In this work, a cell‐induced interlinking method for MAP scaffold formation is established, which avoids the necessity of chemical crosslinkers and pre‐engineered pores to achieve micro‐ or macropores in these 3D frameworks. This method enables cells to self‐organize with microgels into dynamic tissue constructs, which can be further controlled by altering the microgel properties, the cell/microgel ratio, and well shape. To form a cell‐induced interlinked scaffold, the cells are mixed with dextran‐based microgels and function as a glue between the microgels, resulting in a more homogenous cell distribution throughout the scaffold with efficient cell–cell interactions.
- Open Access
Tuning the Porosity of Dextran Microgels with Supramacromolecular Nanogels as Soft Sacrificial Templates
Hydrogels, as well as colloidal hydrogels (microgels), are important materials for a large variety of applications in the biomedical field. Microgels with a controlled pore size (meso‐ and macropores) are required for efficient nutrient support, modulation of cell adhesion, removal of metabolic products in cell cultures, and probiotic loading. Common microgel fabrication techniques do not provide sufficient control over pore sizes and geometry. In this work, the natural polysaccharide dextran modified with methacrylate groups is used to synthesize highly monodisperse meso‐ and macroporous microgels in a size range of 100–150 µm via photo cross‐linking in microfluidic droplets. The size of mesopores is varied by the concentration of dextran methacrylate chains in the droplets (50–200 g L−1) and the size of macropores is regulated by the integration of pH‐degradable supramacromolecular nanogels with diameters of 300 and 700 nm as sacrificial templates. Using permeability assays combined with confocal laser scanning microscopy, it is demonstrated that functional dextran‐based microgels with uniform and defined pores could be obtained.
Open AccessTuning the Porosity of Dextran Microgels with Supramacromolecular Nanogels as Soft Sacrificial Templates
Hydrogels, as well as colloidal hydrogels (microgels), are important materials for a large variety of applications in the biomedical field. Microgels with a controlled pore size (meso‐ and macropores) are required for efficient nutrient support, modulation of cell adhesion, removal of metabolic products in cell cultures, and probiotic loading. Common microgel fabrication techniques do not provide sufficient control over pore sizes and geometry. In this work, the natural polysaccharide dextran modified with methacrylate groups is used to synthesize highly monodisperse meso‐ and macroporous microgels in a size range of 100–150 µm via photo cross‐linking in microfluidic droplets. The size of mesopores is varied by the concentration of dextran methacrylate chains in the droplets (50–200 g L−1) and the size of macropores is regulated by the integration of pH‐degradable supramacromolecular nanogels with diameters of 300 and 700 nm as sacrificial templates. Using permeability assays combined with confocal laser scanning microscopy, it is demonstrated that functional dextran‐based microgels with uniform and defined pores could be obtained.