S. Narasimman
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
S. Narasimman has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Jie Huang
Missouri University of Science and Technology
2 shared publications - Koustav Dey
Missouri University of Science and Technology
2 shared publications - Rex E. Gerald
Department of Electrical and Computer Engineering, Missouri University of Science and Technology, Rolla, MO, USA
2 shared publications - Zachariah Callottu Alex
School of Electronics Engineering, Vellore Institute of Technology, Vellore, India
2 shared publications A. Prasanth
Division of Optics, FZU Institute of Physics, Prague, Czech Republic
1 shared publication- A. Prasanth
Division of Optics, FZU Institute of Physics, Prague 18200, Czech Republic
1 shared publication
Latest Publications
- Open Access
- 26 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Reviews
- Vol. 3, 295-313
Advancing Toward Deployable Sapphire Fiber Sensors: A Review of Emerging Sensing Techniques and Innovative Optical Cladding Strategies
Single-crystal sapphire optical fibers have emerged as promising candidates for sensing in extreme environments where conventional silica fibers fail, owing to their exceptional thermal stability, high mechanical strength, and broad optical transparency up to ∼2040 °C. Recent progress has extended sapphire fiber sensing into diverse domains, including temperature, pressure, strain, and chemical detection, yet significant challenges remain, particularly the highly multimode nature of these fibers and the absence of a robust cladding suitable for harsh conditions. This review provides a comprehensive overview of recent advances in sapphire fiber–based sensing technologies, with a primary focus on interferometric configurations and sapphire fiber Bragg grating–based sensors, while also briefly discussing emerging approaches such as distributed Raman and evanescent-field–based sensing. Special emphasis is placed on innovative optical cladding strategies, including spinel and ceramic coatings, ion implantation, nanoporous structures, and advanced oxide systems, which are evaluated in terms of thermal stability, refractive index compatibility, and fabrication scalability. Key challenges such as strain sensing at ultra-high temperatures, long-term stability, and reliable integration are critically examined. The review concludes by outlining future research directions focused on developing durable cladding systems, refining fabrication methods, and integrating hybrid sensing modalities to enable deployable sapphire fiber sensors for aerospace, energy, and industrial applications in extreme environments. The objective is to consolidate current knowledge and guide ongoing efforts to realize deployable sapphire fiber sensors for harsh environments.
- 26 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Reviews
- Vol. 3, 295-313
Open AccessAdvancing Toward Deployable Sapphire Fiber Sensors: A Review of Emerging Sensing Techniques and Innovative Optical Cladding Strategies
Single-crystal sapphire optical fibers have emerged as promising candidates for sensing in extreme environments where conventional silica fibers fail, owing to their exceptional thermal stability, high mechanical strength, and broad optical transparency up to ∼2040 °C. Recent progress has extended sapphire fiber sensing into diverse domains, including temperature, pressure, strain, and chemical detection, yet significant challenges remain, particularly the highly multimode nature of these fibers and the absence of a robust cladding suitable for harsh conditions. This review provides a comprehensive overview of recent advances in sapphire fiber–based sensing technologies, with a primary focus on interferometric configurations and sapphire fiber Bragg grating–based sensors, while also briefly discussing emerging approaches such as distributed Raman and evanescent-field–based sensing. Special emphasis is placed on innovative optical cladding strategies, including spinel and ceramic coatings, ion implantation, nanoporous structures, and advanced oxide systems, which are evaluated in terms of thermal stability, refractive index compatibility, and fabrication scalability. Key challenges such as strain sensing at ultra-high temperatures, long-term stability, and reliable integration are critically examined. The review concludes by outlining future research directions focused on developing durable cladding systems, refining fabrication methods, and integrating hybrid sensing modalities to enable deployable sapphire fiber sensors for aerospace, energy, and industrial applications in extreme environments. The objective is to consolidate current knowledge and guide ongoing efforts to realize deployable sapphire fiber sensors for harsh environments.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-18
Mitigating Hysteresis in Metal-Coated Fibers via Optimized Thermal Treatment for Advanced Distributed High-Temperature Sensing Applications
Metal-coated optical fibers are widely employed in sensing applications owing to their superior mechanical strength and corrosion resistance. However, their calibration at elevated temperatures is hindered by hysteresis, manifested as discrepancies between heating and cooling cycles, primarily caused by residual strain from mismatched thermal expansion coefficients (TECs) between the metal coating and silica cladding. This research introduces an optimal heat treatment procedure aimed at minimizing the impact of the mismatch in TECs between the cladding and the coating materials that causes the residual strain in gold (Au) and copper (Cu) coated fibers for achieving reliable distributed high temperature sensing up to 500 °C using Optical Frequency Domain Reflectometry (OFDR) technology. The treatment facilitates stress relaxation and microstructural modifications, including surface diffusion, grain growth and oxidation (for Cu coatings), which collectively induce partial interfacial delamination and thereby suppress hysteresis. This work presents the first comprehensive experimental study to systematically investigate and demonstrate the mitigation of hysteresis through an optimized heat treatment process and its underlying mechanisms in metal-coated fibers, supported by microstructural insights. The identified treatment range of 25–300 °C achieves substantial reductions in residual strain, lowering hysteresis effects by approximately 90.2% in Cu-coated fibers and 86.6% in Au-coated fibers. Furthermore, Au-coated fibers exhibit a consistently lower degree of hysteresis than Cu-coated fibers under comparable thermal conditions. Heat treatment also enhances temperature sensitivity, with improvements of approximately 28.9% for Cu-coated fibers and 6.6% for Au-coated fibers. Post-treatment strain analysis confirms maximum sustainable strain limits of ~6000 με for Au-coated fibers and ~12,000 με for Cu-coated fibers. Both fiber types also demonstrated excellent thermal stability, maintaining consistent performance across three heating cycles between 25 °C and 300 °C over a 20-hour period. Collectively, the findings not only advance the scientific understanding of residual strain relaxation mechanisms but also provide a practical route toward robust, precise, and reliable distributed sensing for demanding industrial environments such as the steel, oil and gas sectors.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-18
Mitigating Hysteresis in Metal-Coated Fibers via Optimized Thermal Treatment for Advanced Distributed High-Temperature Sensing Applications
Metal-coated optical fibers are widely employed in sensing applications owing to their superior mechanical strength and corrosion resistance. However, their calibration at elevated temperatures is hindered by hysteresis, manifested as discrepancies between heating and cooling cycles, primarily caused by residual strain from mismatched thermal expansion coefficients (TECs) between the metal coating and silica cladding. This research introduces an optimal heat treatment procedure aimed at minimizing the impact of the mismatch in TECs between the cladding and the coating materials that causes the residual strain in gold (Au) and copper (Cu) coated fibers for achieving reliable distributed high temperature sensing up to 500 °C using Optical Frequency Domain Reflectometry (OFDR) technology. The treatment facilitates stress relaxation and microstructural modifications, including surface diffusion, grain growth and oxidation (for Cu coatings), which collectively induce partial interfacial delamination and thereby suppress hysteresis. This work presents the first comprehensive experimental study to systematically investigate and demonstrate the mitigation of hysteresis through an optimized heat treatment process and its underlying mechanisms in metal-coated fibers, supported by microstructural insights. The identified treatment range of 25–300 °C achieves substantial reductions in residual strain, lowering hysteresis effects by approximately 90.2% in Cu-coated fibers and 86.6% in Au-coated fibers. Furthermore, Au-coated fibers exhibit a consistently lower degree of hysteresis than Cu-coated fibers under comparable thermal conditions. Heat treatment also enhances temperature sensitivity, with improvements of approximately 28.9% for Cu-coated fibers and 6.6% for Au-coated fibers. Post-treatment strain analysis confirms maximum sustainable strain limits of ~6000 με for Au-coated fibers and ~12,000 με for Cu-coated fibers. Both fiber types also demonstrated excellent thermal stability, maintaining consistent performance across three heating cycles between 25 °C and 300 °C over a 20-hour period. Collectively, the findings not only advance the scientific understanding of residual strain relaxation mechanisms but also provide a practical route toward robust, precise, and reliable distributed sensing for demanding industrial environments such as the steel, oil and gas sectors.
- 16 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (20) , 38000-38009
Rapid and Sensitive Ethanol Detection Using Ag-Functionalized ZnO Nanorods-Clad Optic Fiber Sensor for Dual-Spectral Region Operation
Nowadays, ethanol detection has garnered significant interest from researchers as valuable tool for monitoring breath test in drunken driving, checking the safety of food packaging, controlling fermentation processes and detecting leaks from chemical plants. As a result, it is highly important to build a sensor that detects ethanol quickly and has improved sensor properties. Thus, herein a fiber optic ethanol sensor utilizing Ag functionalized ZnO nanorods was fabricated and characterized to enhance ethanol sensing performance. ZnO nanorods were prepared by hydrothermal route and functionalized ZnO surface with metal Ag nanoparticles via chemical reduction method. Numerous characterizations were performed to investigate material properties of the synthesized nanorods. The XRD plot confirmed the hexagonal wurzite crystallite structure of ZnO and three additional peaks of metal Ag appeared at 38.50 °, 44.70 ° and 64.89 ° might be matched to the (1 1 1), (2 0 0) and (2 2 0) planes respectively. The fiber optic sensor head was fabricated by modification of original cladding through chemical etching and dip coated using Ag functionalized ZnO nanorods. Subsequently, the sensor head was exposed to test VOCs including ethanol, isopropyl alcohol (IPA), acetone and methanol (0-500 ppm) to investigate the gas sensor response behavior of pristine and Ag functionalized ZnO nanorods at room temperature. Noticeably, Ag functionalized ZnO based gas sensor possesses higher selectivity towards ethanol along with enhanced sensor response (S.R.) ~33.6% at 693 nm and ~34.7% at 772 nm. The sensor shown better linearity (R2=0.97) towards ethanol over 0-500 ppm dynamic concentration range, faster response/recovery time of 12 s/20 s, LOD of 53 ppm, better repeatability and stability. The proposed enhanced ethanol sensing mechanism is thoroughly detailed. The exemplary sensor results demonstrated the possibility of Ag-functionalized ZnO as the potential nanomaterial for ethanol sensor fabrication, capable of operating effectively in both the visible and NIR regions.
- 16 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (20) , 38000-38009
Rapid and Sensitive Ethanol Detection Using Ag-Functionalized ZnO Nanorods-Clad Optic Fiber Sensor for Dual-Spectral Region Operation
Nowadays, ethanol detection has garnered significant interest from researchers as valuable tool for monitoring breath test in drunken driving, checking the safety of food packaging, controlling fermentation processes and detecting leaks from chemical plants. As a result, it is highly important to build a sensor that detects ethanol quickly and has improved sensor properties. Thus, herein a fiber optic ethanol sensor utilizing Ag functionalized ZnO nanorods was fabricated and characterized to enhance ethanol sensing performance. ZnO nanorods were prepared by hydrothermal route and functionalized ZnO surface with metal Ag nanoparticles via chemical reduction method. Numerous characterizations were performed to investigate material properties of the synthesized nanorods. The XRD plot confirmed the hexagonal wurzite crystallite structure of ZnO and three additional peaks of metal Ag appeared at 38.50 °, 44.70 ° and 64.89 ° might be matched to the (1 1 1), (2 0 0) and (2 2 0) planes respectively. The fiber optic sensor head was fabricated by modification of original cladding through chemical etching and dip coated using Ag functionalized ZnO nanorods. Subsequently, the sensor head was exposed to test VOCs including ethanol, isopropyl alcohol (IPA), acetone and methanol (0-500 ppm) to investigate the gas sensor response behavior of pristine and Ag functionalized ZnO nanorods at room temperature. Noticeably, Ag functionalized ZnO based gas sensor possesses higher selectivity towards ethanol along with enhanced sensor response (S.R.) ~33.6% at 693 nm and ~34.7% at 772 nm. The sensor shown better linearity (R2=0.97) towards ethanol over 0-500 ppm dynamic concentration range, faster response/recovery time of 12 s/20 s, LOD of 53 ppm, better repeatability and stability. The proposed enhanced ethanol sensing mechanism is thoroughly detailed. The exemplary sensor results demonstrated the possibility of Ag-functionalized ZnO as the potential nanomaterial for ethanol sensor fabrication, capable of operating effectively in both the visible and NIR regions.
- 27 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (27) , 35525-35540
Fiber Optic Sensor Coated with Multiple Layers of Hexagonal Boron Nitride Nanosheets (BNNS) for the Detection of Volatile Organic Compounds
Nowadays, volatile organic compound (VOC) detection is imperative to ensure environmental safety in industry and indoor environments, as well as to monitor human health in medical diagnosis. Gas sensors with the best sensor response, selectivity, and stability are in high demand. Simultaneously, the advancement of nanotechnology facilitates novel nanomaterial-based gas sensors with superior sensor characteristics and low power consumption. Recently, boron nitride, a 2D material, has emerged as an excellent candidate for gas sensing and demonstrated exceptional sensing characteristics for new-generation gas sensing devices. Herein, ultrathin porous boron nitride nanosheets (BNNSs) with large lateral sizes were synthesized using a facile synthesis approach, and their material characteristics were investigated utilizing a variety of analytical techniques, including X-ray diffraction, Fourier transform infrared spectroscopy, ultraviolet spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy. A BNNS-coated cladding-modified fiber optic sensor (FOS) probe was prepared and employed for VOC (ammonia, ethanol, and acetone) sensing across concentrations varying from 0 to 300 ppm. The BNNSs-coated FOS demonstrated better selectivity toward 300 ppm ammonia, and specifically annealed BNNSs displayed a maximum sensor response of 55% along with a response/recovery times of 15 s/34 s compared to its counterparts. The superior ammonia sensing performances could be attributed to the formation of ultrathin nanosheets and a porous surface with slit-like features in hexagonal boron nitride.
- 27 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (27) , 35525-35540
Fiber Optic Sensor Coated with Multiple Layers of Hexagonal Boron Nitride Nanosheets (BNNS) for the Detection of Volatile Organic Compounds
Nowadays, volatile organic compound (VOC) detection is imperative to ensure environmental safety in industry and indoor environments, as well as to monitor human health in medical diagnosis. Gas sensors with the best sensor response, selectivity, and stability are in high demand. Simultaneously, the advancement of nanotechnology facilitates novel nanomaterial-based gas sensors with superior sensor characteristics and low power consumption. Recently, boron nitride, a 2D material, has emerged as an excellent candidate for gas sensing and demonstrated exceptional sensing characteristics for new-generation gas sensing devices. Herein, ultrathin porous boron nitride nanosheets (BNNSs) with large lateral sizes were synthesized using a facile synthesis approach, and their material characteristics were investigated utilizing a variety of analytical techniques, including X-ray diffraction, Fourier transform infrared spectroscopy, ultraviolet spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy. A BNNS-coated cladding-modified fiber optic sensor (FOS) probe was prepared and employed for VOC (ammonia, ethanol, and acetone) sensing across concentrations varying from 0 to 300 ppm. The BNNSs-coated FOS demonstrated better selectivity toward 300 ppm ammonia, and specifically annealed BNNSs displayed a maximum sensor response of 55% along with a response/recovery times of 15 s/34 s compared to its counterparts. The superior ammonia sensing performances could be attributed to the formation of ultrathin nanosheets and a porous surface with slit-like features in hexagonal boron nitride.