J. Gowri Shankar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
J. Gowri Shankar has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Belwin Edward Jeyaraj
VIT University
5 shared publications D. Fathema Farzana
2 shared publicationsE. Kaliappan
2 shared publicationsJ. Belwin Edward
2 shared publications- Ponnambalam Pathipooranam
School of Electrical Engineering, Vellore Institute of Technology, Vellore, India
2 shared publications B. Ponkarthika
1 shared publication
Latest Publications
- 1 January 2020
- Published by Inderscience Publishers in International Journal of Heavy Vehicle Systems
- Vol. 27 (1/2) , 33
Design and implementation of 31 level asymmetrical cascaded MLI with DC-DC flyback converter for photovoltaic system using P&O technique for electric traction application
This paper proposes a design and implementation of 31-Level MLI (Multi-Level Inverter) which is supplied from a single solar panel with multioutput flyback converter for transformer-less railway traction drive. The multioutput flyback converter provides isolation for the circuit and also produces four different supply voltages based on the transformer turns ratio. In asymmetrical MLI the DC source magnitudes are unequal and it is designed with binary form of voltage such as 15Vdc, 30Vdc, 60Vdc and 120Vdc. In this proposed technique, we are using a single solar panel and single fly back converter, from this four DC output voltages are obtained in the ratio of 1 : 2 : 4 : 8. Our proposed technique requires fewer switches, i.e., seven switches for more levels, i.e., 31 levels, and it also gives less total harmonic distortion (THD). The results are verified in MATLAB, PROTEUS and realtime system using TMS320F2802 and ATMEGA328.
- 1 January 2020
- Published by Inderscience Publishers in International Journal of Heavy Vehicle Systems
- Vol. 27 (1/2) , 33
Design and implementation of 31 level asymmetrical cascaded MLI with DC-DC flyback converter for photovoltaic system using P&O technique for electric traction application
This paper proposes a design and implementation of 31-Level MLI (Multi-Level Inverter) which is supplied from a single solar panel with multioutput flyback converter for transformer-less railway traction drive. The multioutput flyback converter provides isolation for the circuit and also produces four different supply voltages based on the transformer turns ratio. In asymmetrical MLI the DC source magnitudes are unequal and it is designed with binary form of voltage such as 15Vdc, 30Vdc, 60Vdc and 120Vdc. In this proposed technique, we are using a single solar panel and single fly back converter, from this four DC output voltages are obtained in the ratio of 1 : 2 : 4 : 8. Our proposed technique requires fewer switches, i.e., seven switches for more levels, i.e., 31 levels, and it also gives less total harmonic distortion (THD). The results are verified in MATLAB, PROTEUS and realtime system using TMS320F2802 and ATMEGA328.
- 22 November 2019
- Published by Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication (BEIESP) in International Journal of Engineering and Advanced Technology
- Vol. 8 (6s3) , 1406-1409
Modeling Of Pv Array For Dc-Dc Flyback Converter With Asymmetrical Output Voltage
This paper manages the modeling of PV(Photovoltaic) array for Flyback converter (FBC) with Asymmetrical voltage. The Solar PV system is fed with Flyback converter on transformer in primary side. The MOSFET switch is controlled by using Maximum power tracing system with the switching frequency of 65KHz. The Petrub and Observe algorithm is utilized in the system for controlling the switch in the converter. The Output of Flyback converter with four different asymmetrical output voltage. The input FBC is 24V and output FBC is 6.3 Vdc,12.6 Vdc,26.2 Vdc and 52.4 Vdc respectively. The output capacitor is used for filter the pure DC output voltage of this system. The asymmetrical output voltage is used for Asymmetrical multilevel inverter. The system is design in MATLAB and overall system is implemented in real time system suing ARDUINO Controller, MOSFET driver circuit and ferrate core transformer.
- 22 November 2019
- Published by Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication (BEIESP) in International Journal of Engineering and Advanced Technology
- Vol. 8 (6s3) , 1406-1409
Modeling Of Pv Array For Dc-Dc Flyback Converter With Asymmetrical Output Voltage
This paper manages the modeling of PV(Photovoltaic) array for Flyback converter (FBC) with Asymmetrical voltage. The Solar PV system is fed with Flyback converter on transformer in primary side. The MOSFET switch is controlled by using Maximum power tracing system with the switching frequency of 65KHz. The Petrub and Observe algorithm is utilized in the system for controlling the switch in the converter. The Output of Flyback converter with four different asymmetrical output voltage. The input FBC is 24V and output FBC is 6.3 Vdc,12.6 Vdc,26.2 Vdc and 52.4 Vdc respectively. The output capacitor is used for filter the pure DC output voltage of this system. The asymmetrical output voltage is used for Asymmetrical multilevel inverter. The system is design in MATLAB and overall system is implemented in real time system suing ARDUINO Controller, MOSFET driver circuit and ferrate core transformer.
- 30 September 2019
- Published by Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication (BEIESP) in International Journal of Recent Technology and Engineering (IJRTE)
- Vol. 8 (3) , 6584-6591
A 13-Level Asymmetrical Cascaded Inverter for Photovoltaic System With DC-DC Flyback Converter
In recent days, multilevel inverter has widely been used for high power application. This may be due to the reduction of total harmonic distortion (THD) of the output voltage level and having low blocking voltages of switches. In the existing system, DC voltage source which is maintained constant is given as the input to the inverters which contains the series connection of fundamental block and is analyzed in symmetric and asymmetric mode of operation to produce various voltage levels. The proposed approach replaces the DC voltage source to the Photovoltaic (PV) cell has been used which has variations in the output voltage side depends on the solar irradiation level. This Photovoltaic cell uses Maximum Power Point Tracking (MPPT) algorithm to produce required voltage. As the input to the multilevel inverter (MLI) has to be maintained constant a fly back forward converter has been used in between the Photovoltaic cell and the multilevel inverter, so that the required multiple constant output voltage has been obtained on the output of the converter. Using the output of the converter 13 output voltage levels can be obtained from the multilevel inverter. The performance of the proposed system is verified by simulation through MATLAB/Simulink environment
- 30 September 2019
- Published by Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication (BEIESP) in International Journal of Recent Technology and Engineering (IJRTE)
- Vol. 8 (3) , 6584-6591
A 13-Level Asymmetrical Cascaded Inverter for Photovoltaic System With DC-DC Flyback Converter
In recent days, multilevel inverter has widely been used for high power application. This may be due to the reduction of total harmonic distortion (THD) of the output voltage level and having low blocking voltages of switches. In the existing system, DC voltage source which is maintained constant is given as the input to the inverters which contains the series connection of fundamental block and is analyzed in symmetric and asymmetric mode of operation to produce various voltage levels. The proposed approach replaces the DC voltage source to the Photovoltaic (PV) cell has been used which has variations in the output voltage side depends on the solar irradiation level. This Photovoltaic cell uses Maximum Power Point Tracking (MPPT) algorithm to produce required voltage. As the input to the multilevel inverter (MLI) has to be maintained constant a fly back forward converter has been used in between the Photovoltaic cell and the multilevel inverter, so that the required multiple constant output voltage has been obtained on the output of the converter. Using the output of the converter 13 output voltage levels can be obtained from the multilevel inverter. The performance of the proposed system is verified by simulation through MATLAB/Simulink environment
- 1 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 277-282
A 31-level asymmetrical cascaded multilevel inverter with DC-DC flyback converter for photovoltaic system
A 31 LEVEL Asymmetrical Cascaded H-Bridge Multilevel inverter (ASCHBMLI) with DC-DC Fly back converter with single DC source for photovoltaic system using Maximum Power Point Tracking system. In this paper the photovoltaic (PV) system is given input to the primary side of DC-DC converter, where as the secondary side of the converter consists of `n' no of turns with different output voltage. In Maximum Power Point Tracking (MPPT) system, the Perturb and Observe (P&O) technique is used for controlling the switch in DC-DC FBC. The topology is based on a cascaded connection of single phase sub multilevel converter unit and full bridge Cascaded H Bridge Inverter. The Input DC voltage source of Vdci, Vdc2, Vdc3 & Vdc4 are designed in binary form of voltage of 15Vdci, 30Vdc2, 60Vdc3 &120Vdc4 respectively. The output voltage levels are 2*(1+2+4+8) +1=31) 31 level. The low frequency Pulse Width Modulation Technique is used for controlling the Power semiconductor Switches in the ASCHBMLI.
- 1 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 277-282
A 31-level asymmetrical cascaded multilevel inverter with DC-DC flyback converter for photovoltaic system
A 31 LEVEL Asymmetrical Cascaded H-Bridge Multilevel inverter (ASCHBMLI) with DC-DC Fly back converter with single DC source for photovoltaic system using Maximum Power Point Tracking system. In this paper the photovoltaic (PV) system is given input to the primary side of DC-DC converter, where as the secondary side of the converter consists of `n' no of turns with different output voltage. In Maximum Power Point Tracking (MPPT) system, the Perturb and Observe (P&O) technique is used for controlling the switch in DC-DC FBC. The topology is based on a cascaded connection of single phase sub multilevel converter unit and full bridge Cascaded H Bridge Inverter. The Input DC voltage source of Vdci, Vdc2, Vdc3 & Vdc4 are designed in binary form of voltage of 15Vdci, 30Vdc2, 60Vdc3 &120Vdc4 respectively. The output voltage levels are 2*(1+2+4+8) +1=31) 31 level. The low frequency Pulse Width Modulation Technique is used for controlling the Power semiconductor Switches in the ASCHBMLI.
- 1 April 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Performance evaluation of a nine level cascaded multilevel inverter with single DC source for photovoltaic system
This paper introduces a Three-phase nine-level Cascaded H Bridge Multilevel inverter with single DC source for Photovoltaic System. The input parameters are the voltage, current and the duty cycle D are utilized to produce the ideal MPPT(Maximum Power Point Tracking) under various working conditions, The photovoltaic system simulated and build by photovoltaic arrays, a DC/DC buck converter, a sliding mode MPPT control. The significant confinements of the cascade multilevel converters is required of isolated dc voltage sources for each H-bridge, this builds the converter cost and reduces the dependability of the system. The present paper explores different cascade multilevel inverter (CMI) based topologies with reduced dc sources lastly by drawing in low frequency transformers, the CHBMI with single dc source is controlled by Phase Disposition-Pulse Width Modulation Technique (PD-PWM) and analyzing the Total harmonic distortion with different voltage levels.
- 1 April 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Performance evaluation of a nine level cascaded multilevel inverter with single DC source for photovoltaic system
This paper introduces a Three-phase nine-level Cascaded H Bridge Multilevel inverter with single DC source for Photovoltaic System. The input parameters are the voltage, current and the duty cycle D are utilized to produce the ideal MPPT(Maximum Power Point Tracking) under various working conditions, The photovoltaic system simulated and build by photovoltaic arrays, a DC/DC buck converter, a sliding mode MPPT control. The significant confinements of the cascade multilevel converters is required of isolated dc voltage sources for each H-bridge, this builds the converter cost and reduces the dependability of the system. The present paper explores different cascade multilevel inverter (CMI) based topologies with reduced dc sources lastly by drawing in low frequency transformers, the CHBMI with single dc source is controlled by Phase Disposition-Pulse Width Modulation Technique (PD-PWM) and analyzing the Total harmonic distortion with different voltage levels.
- 9 February 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 327-336
A Single Phase Hybrid Multilevel Inverter with High Step up DC-DC Converter for Photovoltaic System
This Paper presents a Single Phase Multilevel Inverter with DC-DC High Step UP (HSU) Converter for Photovoltaic (PV) System. Maximum Power Point Tracking (MPPT) assumes a noteworthy part in PV system since it expands the output power of PV system, for a given arrangement of condition and enhances the proficiency of the system. Perturb and observe is used to track the MPPT of the system .The DC-DC buck converter output voltage is 49.2V. To pick up the output voltage of 220V, a DC-DC HIGH Step UP (HSU) Converter is executed. Multilevel inverter is preferred for the proposed system, since it expands the aggregate number of output voltage levels with less number of switches. The Output voltage levels for Hybrid Multilevel inverter (HMLI) are +Vdc, +2Vdc/3, +Vdc/3, 0Vdc,-Vdc/3,-2Vdc/3,-Vdc. The Low switching frequency and High switching frequency (Multi reference Pulse width Modulation Technique (MRPWM)) is compared and its utilized to control the switches in the HMLI. The overall scheme is simulated by providing MATLAB/SIMULINK and the HMLI is done by utilizing PROTEUS programming and real time system.
- 9 February 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 327-336
A Single Phase Hybrid Multilevel Inverter with High Step up DC-DC Converter for Photovoltaic System
This Paper presents a Single Phase Multilevel Inverter with DC-DC High Step UP (HSU) Converter for Photovoltaic (PV) System. Maximum Power Point Tracking (MPPT) assumes a noteworthy part in PV system since it expands the output power of PV system, for a given arrangement of condition and enhances the proficiency of the system. Perturb and observe is used to track the MPPT of the system .The DC-DC buck converter output voltage is 49.2V. To pick up the output voltage of 220V, a DC-DC HIGH Step UP (HSU) Converter is executed. Multilevel inverter is preferred for the proposed system, since it expands the aggregate number of output voltage levels with less number of switches. The Output voltage levels for Hybrid Multilevel inverter (HMLI) are +Vdc, +2Vdc/3, +Vdc/3, 0Vdc,-Vdc/3,-2Vdc/3,-Vdc. The Low switching frequency and High switching frequency (Multi reference Pulse width Modulation Technique (MRPWM)) is compared and its utilized to control the switches in the HMLI. The overall scheme is simulated by providing MATLAB/SIMULINK and the HMLI is done by utilizing PROTEUS programming and real time system.
- 9 February 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 70-76
Comparison of Fuzzy and MPC based Flying Capacitor Multicell Inverter
The Flying Capacitor Multicell Inverter (FCMI) possesses an inherent balancing of voltage across the capacitors and it is used to distribute the input voltage and minimize the voltage stress. This FCMI's RMS is first controlled with fuzzy controller and the outputs are analyzed, then a suitable Model Predictive Controller (MPC) is considered to be in command of the RMS voltage of the Flying Capacitor Multicell Inverter and the outputs are measured up to with fuzzy controlled FCMI. The controller (Fuzzy and MPC) are considered for different levels of FCMI circuits and has been found that MPC controller gives better performance as compared to the fuzzy controlled FCMI. To weigh against the performance of Fuzzy and MPC controllers the Rise time, Settling time, Overshoot, Peak and Peak time are taken as comparison parameters and the comparison chart is presented for analysis.
- 9 February 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 70-76
Comparison of Fuzzy and MPC based Flying Capacitor Multicell Inverter
The Flying Capacitor Multicell Inverter (FCMI) possesses an inherent balancing of voltage across the capacitors and it is used to distribute the input voltage and minimize the voltage stress. This FCMI's RMS is first controlled with fuzzy controller and the outputs are analyzed, then a suitable Model Predictive Controller (MPC) is considered to be in command of the RMS voltage of the Flying Capacitor Multicell Inverter and the outputs are measured up to with fuzzy controlled FCMI. The controller (Fuzzy and MPC) are considered for different levels of FCMI circuits and has been found that MPC controller gives better performance as compared to the fuzzy controlled FCMI. To weigh against the performance of Fuzzy and MPC controllers the Rise time, Settling time, Overshoot, Peak and Peak time are taken as comparison parameters and the comparison chart is presented for analysis.
- Open Access
- 30 June 2016
- Published by Indian Society for Education and Environment in Indian Journal of Science and Technology
- Vol. 9 (22)
A New Topology for Regulation of Active Power by Battery Storage System with Cascaded Multilevel Inverter using Three Phase System
The battery plays a major role for energy storage in non conventional energy systems. This paper proposed an AC-DCAC converter using Pulse Width Modulation Technique for Multilevel inverter. Normally the voltage drop increases when the load increases. Because the load voltages are consume more than the source voltages. To overcome this problem, the battery energy depot system is linked to the converter for controlling the active power. The performance of the proposed topology is a present active power regulates in battery energy depot scheme has been verified by simulation MATLAB/SIMULINK environment.
- 30 June 2016
- Published by Indian Society for Education and Environment in Indian Journal of Science and Technology
- Vol. 9 (22)
Open AccessA New Topology for Regulation of Active Power by Battery Storage System with Cascaded Multilevel Inverter using Three Phase System
The battery plays a major role for energy storage in non conventional energy systems. This paper proposed an AC-DCAC converter using Pulse Width Modulation Technique for Multilevel inverter. Normally the voltage drop increases when the load increases. Because the load voltages are consume more than the source voltages. To overcome this problem, the battery energy depot system is linked to the converter for controlling the active power. The performance of the proposed topology is a present active power regulates in battery energy depot scheme has been verified by simulation MATLAB/SIMULINK environment.
- 1 March 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-10
A 15-level asymmetric cascaded H bridge multilevel inverter with less number of switches for photo voltaic system
This Paper presents a 15 level Asymmetrical Cascaded H bridge multilevel inverter Topology for Photovoltaic system. In this system Symmetrical and Asymmetrical Multilevel inverter (MLI) is utilized. In Symmetrical MLI, the DC source magnitude are equal ie., 50Vdc, 50Vdc & 50Vdc., where as in Asymmetrical MLI the DC source Magnitude are unequal and it is designed with binary form of voltage such as 50Vdc, 100Vdc & 200Vdc. Comparing both the MLI, Asymmetrical MLI generates a number of output voltage level with same number of Power semiconductor switches. The phase Disposition Pulse Width Modulation (PD-PWM) technique is used for controlling the Power semiconductor switches in MLI. The results are verified in both MATLAB and PROTEUS.
- 1 March 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-10
A 15-level asymmetric cascaded H bridge multilevel inverter with less number of switches for photo voltaic system
This Paper presents a 15 level Asymmetrical Cascaded H bridge multilevel inverter Topology for Photovoltaic system. In this system Symmetrical and Asymmetrical Multilevel inverter (MLI) is utilized. In Symmetrical MLI, the DC source magnitude are equal ie., 50Vdc, 50Vdc & 50Vdc., where as in Asymmetrical MLI the DC source Magnitude are unequal and it is designed with binary form of voltage such as 50Vdc, 100Vdc & 200Vdc. Comparing both the MLI, Asymmetrical MLI generates a number of output voltage level with same number of Power semiconductor switches. The phase Disposition Pulse Width Modulation (PD-PWM) technique is used for controlling the Power semiconductor switches in MLI. The results are verified in both MATLAB and PROTEUS.