Masayuki Inaba
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Masayuki Inaba has a total of 212 co-authors. Here are the top co-authors by number of shared publications:
- Kei Okada
The University of Tokyo
65 shared publications - Kento Kawaharazuka
The University of Tokyo
20 shared publications - Ikuo Mizuuchi
Tokyo University of Agriculture and Technology
16 shared publications - Tomoaki Yoshikai
The University of Tokyo
15 shared publications - Moju Zhao
The University of Tokyo
12 shared publications - Hirochika Inoue
University of Tokyo
11 shared publications
Latest Publications
- 23 May 2025
- Published by Taylor & Francis in Advanced Robotics
- Vol. 39 (11) , 647-662
GenAerialNav: obstacle avoidance in real flight for generalized multirotors by reinforcement learning with variable Acc-Properties in dynamics
- 23 May 2025
- Published by Taylor & Francis in Advanced Robotics
- Vol. 39 (11) , 647-662
GenAerialNav: obstacle avoidance in real flight for generalized multirotors by reinforcement learning with variable Acc-Properties in dynamics
- 17 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 41 (15523098) , 2911-2930
CoverLib: Classifiers-Equipped Experience Library by Iterative Problem Distribution Coverage Maximization for Domain-Tuned Motion Planning
Library-based methods are known to be very effective for fast motion planning by adapting an experience retrieved from a precomputed library. This article presents CoverLib, a principled approach for constructing and utilizing such a library. CoverLib iteratively adds an experience-classifier-pair to the library, where each classifier corresponds to an adaptable region of the experience within the problem space. This iterative process is an active procedure, as it selects the next experience based on its ability to effectively cover the uncovered region. During the query phase, these classifiers are utilized to select an experience that is expected to be adaptable for a given problem. Experimental results demonstrate that CoverLib effectively mitigates the trade-off between plannability and speed observed in global (e.g. sampling-based) and local (e.g. optimization-based) methods. As a result, it achieves both fast planning and high success rates over the problem domain. Moreover, due to its adaptation-algorithm-agnostic nature, CoverLib seamlessly integrates with various adaptation methods, including nonlinear programming-based and sampling-based algorithms.
- 17 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 41 (15523098) , 2911-2930
CoverLib: Classifiers-Equipped Experience Library by Iterative Problem Distribution Coverage Maximization for Domain-Tuned Motion Planning
Library-based methods are known to be very effective for fast motion planning by adapting an experience retrieved from a precomputed library. This article presents CoverLib, a principled approach for constructing and utilizing such a library. CoverLib iteratively adds an experience-classifier-pair to the library, where each classifier corresponds to an adaptable region of the experience within the problem space. This iterative process is an active procedure, as it selects the next experience based on its ability to effectively cover the uncovered region. During the query phase, these classifiers are utilized to select an experience that is expected to be adaptable for a given problem. Experimental results demonstrate that CoverLib effectively mitigates the trade-off between plannability and speed observed in global (e.g. sampling-based) and local (e.g. optimization-based) methods. As a result, it achieves both fast planning and high success rates over the problem domain. Moreover, due to its adaptation-algorithm-agnostic nature, CoverLib seamlessly integrates with various adaptation methods, including nonlinear programming-based and sampling-based algorithms.
- 18 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (5) , 3537-3547
BEATLE—Self-Reconfigurable Aerial Robot: Design, Control and Experimental Validation
Modular self-reconfigurable robots (MSRRs) offer enhanced task flexibility by constructing various structures suitable for each task. However, conventional terrestrial MSRRs equipped with wheels face critical challenges, including limitations in the size of constructible structures and system robustness due to elevated wrench loads applied to each module. In this work, we introduce an aerial MSRR (A-MSRR) system named BEnding-moment-free self-reconfigurable Aerial roboT moduLE (BEATLE), capable of merging and separating in-flight. BEATLE can merge without applying wrench loads to adjacent modules, thereby expanding the scalability and robustness of conventional terrestrial MSRRs. In this article, we propose a system configuration for BEATLE, including mechanical design, a control framework for multiconnected flight, and a motion planner for reconfiguration motion. The design of a docking mechanism and housing structure aims to balance the durability of the constructed structure with ease of separation. Furthermore, the proposed flight control framework achieves stable multiconnected flight based on contact wrench control. Moreover, the proposed motion planner based on a finite state machine achieves precise and robust reconfiguration motion. We also introduce the actual implementation of the prototype and validate the robustness and scalability of the proposed system design through experiments and simulation studies.
- 18 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (5) , 3537-3547
BEATLE—Self-Reconfigurable Aerial Robot: Design, Control and Experimental Validation
Modular self-reconfigurable robots (MSRRs) offer enhanced task flexibility by constructing various structures suitable for each task. However, conventional terrestrial MSRRs equipped with wheels face critical challenges, including limitations in the size of constructible structures and system robustness due to elevated wrench loads applied to each module. In this work, we introduce an aerial MSRR (A-MSRR) system named BEnding-moment-free self-reconfigurable Aerial roboT moduLE (BEATLE), capable of merging and separating in-flight. BEATLE can merge without applying wrench loads to adjacent modules, thereby expanding the scalability and robustness of conventional terrestrial MSRRs. In this article, we propose a system configuration for BEATLE, including mechanical design, a control framework for multiconnected flight, and a motion planner for reconfiguration motion. The design of a docking mechanism and housing structure aims to balance the durability of the constructed structure with ease of separation. Furthermore, the proposed flight control framework achieves stable multiconnected flight based on contact wrench control. Moreover, the proposed motion planner based on a finite state machine achieves precise and robust reconfiguration motion. We also introduce the actual implementation of the prototype and validate the robustness and scalability of the proposed system design through experiments and simulation studies.
- 17 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics & Automation Magazine
- Vol. 32 (2) , 80-98
GeMuCo: Generalized Multisensory Correlational Model for Body Schema Learning
Humans can autonomously learn the relationship between sensation and motion in their own body, estimate and control their own body states, and move while continuously adapting to the current environment. On the other hand, current robots control their body by learning the network structure described by humans from their experiences, making certain assumptions on the relationship between sensors and actuators. In addition, the network model does not adapt to changes in the robot’s body, the tools that are grasped, or the environment, and there is no unified theory, not only for control but also for state estimation, anomaly detection, simulation, and so on. In this article, we propose a generalized multisensory correlational model (GeMuCo) in which the robot itself acquires a body schema describing the correlation between sensors and actuators from its own experience, including model structures, such as network input/output. The robot adapts to the current environment by updating this body schema model online, estimates and controls its body state, and even performs anomaly detection and simulation. We demonstrate the effectiveness of this method by applying it to tool use considering changes in the grasping state for an axis-driven robot, to joint–muscle mapping learning for a musculoskeletal robot, and to full-body tool manipulation for a low-rigidity plastic-made humanoid.
- 17 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics & Automation Magazine
- Vol. 32 (2) , 80-98
GeMuCo: Generalized Multisensory Correlational Model for Body Schema Learning
Humans can autonomously learn the relationship between sensation and motion in their own body, estimate and control their own body states, and move while continuously adapting to the current environment. On the other hand, current robots control their body by learning the network structure described by humans from their experiences, making certain assumptions on the relationship between sensors and actuators. In addition, the network model does not adapt to changes in the robot’s body, the tools that are grasped, or the environment, and there is no unified theory, not only for control but also for state estimation, anomaly detection, simulation, and so on. In this article, we propose a generalized multisensory correlational model (GeMuCo) in which the robot itself acquires a body schema describing the correlation between sensors and actuators from its own experience, including model structures, such as network input/output. The robot adapts to the current environment by updating this body schema model online, estimates and controls its body state, and even performs anomaly detection and simulation. We demonstrate the effectiveness of this method by applying it to tool use considering changes in the grasping state for an axis-driven robot, to joint–muscle mapping learning for a musculoskeletal robot, and to full-body tool manipulation for a low-rigidity plastic-made humanoid.
- 16 May 2024
- Published by World Scientific Pub Co Pte Ltd in International Journal of Humanoid Robotics
- Vol. 21 (06)
Sampling-Based Global Path Planning Using Convex Polytope Approximation for Narrow Collision-Free Space of Humanoid
In this paper, we propose a computationally fast method of sampling-based global path planning for humanoids under Manifold Constraints such as closed kinematic chains and Volume-Reducing Constraints such as collision avoidance. In multi-contact and whole-body manipulation of humanoids, narrow collision-free space causes path planning to take a long computation time (narrow corridor problem). In previous research of constrained planning, Manifold Constraints are locally approximated by tangent plane, and steering motions along Manifold Constraints are found efficiently by projection or continuation methods. In this paper, we applied constrained planning algorithms to collision avoidance. Since tangent plane cannot approximate Volume-Reducing Constraints, we adopted convex polytope instead of tangent plane. Both Manifold Constraints and Volume-Reducing Constraints are locally approximated by convex polytope with linear equality and inequality constraints, and steering motions inside the convex polytope are found efficiently by the SQP-based prioritized inverse kinematics. We developed CP-KPIECE (Convex Polytope approximation-based KPIECE) with this approach. Benchmarks using the humanoid JAXON proved the effectiveness of our approach for fast path planning in narrow collision-free space of humanoids.
- 16 May 2024
- Published by World Scientific Pub Co Pte Ltd in International Journal of Humanoid Robotics
- Vol. 21 (06)
Sampling-Based Global Path Planning Using Convex Polytope Approximation for Narrow Collision-Free Space of Humanoid
In this paper, we propose a computationally fast method of sampling-based global path planning for humanoids under Manifold Constraints such as closed kinematic chains and Volume-Reducing Constraints such as collision avoidance. In multi-contact and whole-body manipulation of humanoids, narrow collision-free space causes path planning to take a long computation time (narrow corridor problem). In previous research of constrained planning, Manifold Constraints are locally approximated by tangent plane, and steering motions along Manifold Constraints are found efficiently by projection or continuation methods. In this paper, we applied constrained planning algorithms to collision avoidance. Since tangent plane cannot approximate Volume-Reducing Constraints, we adopted convex polytope instead of tangent plane. Both Manifold Constraints and Volume-Reducing Constraints are locally approximated by convex polytope with linear equality and inequality constraints, and steering motions inside the convex polytope are found efficiently by the SQP-based prioritized inverse kinematics. We developed CP-KPIECE (Convex Polytope approximation-based KPIECE) with this approach. Benchmarks using the humanoid JAXON proved the effectiveness of our approach for fast path planning in narrow collision-free space of humanoids.
- 25 April 2024
- Published by Springer Nature
- p. 353-366
Fault Mitigation and Fault Tolerant Humanoid System Against Contact Impact
- 25 April 2024
- Published by Springer Nature
- p. 353-366
Fault Mitigation and Fault Tolerant Humanoid System Against Contact Impact
- 25 April 2024
- Published by Springer Nature
- p. 109-122
System Architecture and Real-World Task Realization of Musculoskeletal Wheeled Robot Musashi-W with Various Hardware Components
- 25 April 2024
- Published by Springer Nature
- p. 109-122
System Architecture and Real-World Task Realization of Musculoskeletal Wheeled Robot Musashi-W with Various Hardware Components
- Open Access
- 11 March 2024
- Published by Association for Computing Machinery (ACM)
- p. 468-472
Development of Meal Partner Robot and Applications Towards Enriching Mealtime Experience
- 11 March 2024
- Published by Association for Computing Machinery (ACM)
- p. 468-472
Open AccessDevelopment of Meal Partner Robot and Applications Towards Enriching Mealtime Experience
- 11 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (5) , 4059-4066
Continuous Object State Recognition for Cooking Robots Using Pre-Trained Vision-Language Models and Black-Box Optimization
The state recognition of the environment and objects by robots is generally based on the judgement of the current state as a classification problem. On the other hand, state changes of food in cooking happen continuously and need to be captured not only at a certain time point but also continuously over time. In addition, the state changes of food are complex and cannot be easily described by manual programming. Therefore, we propose a method to recognize the continuous state changes of food for cooking robots through the spoken language using pre-trained large-scale vision-language models. By using models that can compute the similarity between images and texts continuously over time, we can capture the state changes of food while cooking. We also show that by adjusting the weighting of each text prompt based on fitting the similarity changes to a sigmoid function and then performing black-box optimization, more accurate and robust continuous state recognition can be achieved. We demonstrate the effectiveness and limitations of this method by performing the recognition of water boiling, butter melting, egg cooking, and onion stir-frying.
- 11 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (5) , 4059-4066
Continuous Object State Recognition for Cooking Robots Using Pre-Trained Vision-Language Models and Black-Box Optimization
The state recognition of the environment and objects by robots is generally based on the judgement of the current state as a classification problem. On the other hand, state changes of food in cooking happen continuously and need to be captured not only at a certain time point but also continuously over time. In addition, the state changes of food are complex and cannot be easily described by manual programming. Therefore, we propose a method to recognize the continuous state changes of food for cooking robots through the spoken language using pre-trained large-scale vision-language models. By using models that can compute the similarity between images and texts continuously over time, we can capture the state changes of food while cooking. We also show that by adjusting the weighting of each text prompt based on fitting the similarity changes to a sigmoid function and then performing black-box optimization, more accurate and robust continuous state recognition can be achieved. We demonstrate the effectiveness and limitations of this method by performing the recognition of water boiling, butter melting, egg cooking, and onion stir-frying.