Alejandro Rodriguez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Alejandro Rodriguez has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Francisco Jesus Muñoz Gutierrez
Electrical Engineering Department, University of Malaga, Dr Ortiz Ramos s/n, 29071 Malaga, Spain
7 shared publications F. Martín
5 shared publications- Jose Antonio Aguado
Universidad de Málaga
5 shared publications F. Muñoz
4 shared publicationsJ.E. Ruiz
Department of Electrical Engineering, University of Malaga, Spain
4 shared publicationsJ.J. López
4 shared publications
Latest Publications
- Open Access
- 12 November 2026
- Published by MDPI AG in Electronics
- Vol. 15 (22) , 5244
Evaluation of PSO-Tuned DBSCAN and Local Hash-Linked Recording of Synthetic Power Quality Disturbances in Electric Vehicle Charging and Electromobility Systems
Electric vehicle charging motivates the joint consideration of disturbance analysis and traceable event records. This study evaluates particle-swarm-tuned density clustering coupled to a local hash-linked recording procedure. The primary search maximizes silhouette without event labels, using duration and magnitude from synthetic grid-side and electromobility populations of 325 and 132 events. Thirty independent populations and matched-budget random and grid searches quantify agreement, rejection and variability. The primary method attains mean adjusted Rand indices of 0.477 and 0.267, with retained fractions of 0.591 and 0.313, respectively. Complete synthetic waveform-feature ablations reduce agreement under the same search settings. A separate experiment on 47 eligible measured grid events also finds no mean improvement from adding a band-limited harmonic descriptor. Held-out comparisons favor the tested support-vector, random-forest and graph neural classifiers over the specified nearest-core extension of density clustering. Canonical event payloads connect fitted clusters to stored records. Alterations without rehashing are detected locally, whereas consistent rewriting and tail deletion require an independently trusted terminal digest and record count. These results identify the limits of silhouette-only optimization and distinguish local record consistency from sensor authenticity, distributed consensus and operational charging-event recognition.
- 12 November 2026
- Published by MDPI AG in Electronics
- Vol. 15 (22) , 5244
Open AccessEvaluation of PSO-Tuned DBSCAN and Local Hash-Linked Recording of Synthetic Power Quality Disturbances in Electric Vehicle Charging and Electromobility Systems
Electric vehicle charging motivates the joint consideration of disturbance analysis and traceable event records. This study evaluates particle-swarm-tuned density clustering coupled to a local hash-linked recording procedure. The primary search maximizes silhouette without event labels, using duration and magnitude from synthetic grid-side and electromobility populations of 325 and 132 events. Thirty independent populations and matched-budget random and grid searches quantify agreement, rejection and variability. The primary method attains mean adjusted Rand indices of 0.477 and 0.267, with retained fractions of 0.591 and 0.313, respectively. Complete synthetic waveform-feature ablations reduce agreement under the same search settings. A separate experiment on 47 eligible measured grid events also finds no mean improvement from adding a band-limited harmonic descriptor. Held-out comparisons favor the tested support-vector, random-forest and graph neural classifiers over the specified nearest-core extension of density clustering. Canonical event payloads connect fitted clusters to stored records. Alterations without rehashing are detected locally, whereas consistent rewriting and tail deletion require an independently trusted terminal digest and record count. These results identify the limits of silhouette-only optimization and distinguish local record consistency from sensor authenticity, distributed consensus and operational charging-event recognition.
- Open Access
- 14 August 2025
- Published by MDPI AG in Inventions
- Vol. 10 (4) , 72
Performance Analysis of a Floating Seawater Desalination Structure Based on Heat Pipes
This study presents a comprehensive numerical simulation and thermal performance analysis of a novel modular floating solar still system, featuring integrated heat-pipe vacuum tube collectors, designed for seawater desalination. This innovative system—subject of International Patent Application WO 2023/062261 A1—not only aims to enhance efficiency and scalability beyond traditional solar stills, but also addresses the significant environmental challenge of concentrated brine discharge inherent in conventional desalination methods. The study evolved from an initial theoretical model to a rigorous dynamic thermal model, validated using real hourly meteorological data from Málaga, Andalusia, Spain. This modelling approach was developed to quantify heat transfer mechanisms and accurately predict system performance. The refined hourly simulation forecasts an annual freshwater production of approximately 174 L per unit. Notably, a preliminary economic assessment estimates the Cost of Produced Water per Litre (CPL) at 0.7509 EUR/litre, establishing a valuable baseline for future optimisation. These findings underscore the critical importance of dynamic hourly simulations for realistic performance prediction and validate the technical and preliminary economic feasibility of this novel approach. The system’s projected output, modular floating design, and significant environmental advantages position it as a promising and sustainable solution for freshwater production, particularly in coastal regions and sensitive marine ecosystems. This work provides a solid foundation for future experimental validation, cost optimisation, and scalable implementation of renewable energy-driven desalination.
- 14 August 2025
- Published by MDPI AG in Inventions
- Vol. 10 (4) , 72
Open AccessPerformance Analysis of a Floating Seawater Desalination Structure Based on Heat Pipes
This study presents a comprehensive numerical simulation and thermal performance analysis of a novel modular floating solar still system, featuring integrated heat-pipe vacuum tube collectors, designed for seawater desalination. This innovative system—subject of International Patent Application WO 2023/062261 A1—not only aims to enhance efficiency and scalability beyond traditional solar stills, but also addresses the significant environmental challenge of concentrated brine discharge inherent in conventional desalination methods. The study evolved from an initial theoretical model to a rigorous dynamic thermal model, validated using real hourly meteorological data from Málaga, Andalusia, Spain. This modelling approach was developed to quantify heat transfer mechanisms and accurately predict system performance. The refined hourly simulation forecasts an annual freshwater production of approximately 174 L per unit. Notably, a preliminary economic assessment estimates the Cost of Produced Water per Litre (CPL) at 0.7509 EUR/litre, establishing a valuable baseline for future optimisation. These findings underscore the critical importance of dynamic hourly simulations for realistic performance prediction and validate the technical and preliminary economic feasibility of this novel approach. The system’s projected output, modular floating design, and significant environmental advantages position it as a promising and sustainable solution for freshwater production, particularly in coastal regions and sensitive marine ecosystems. This work provides a solid foundation for future experimental validation, cost optimisation, and scalable implementation of renewable energy-driven desalination.
- Open Access
- 15 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 124807-124823
An Optimized Hybrid Framework Based on Long-Short Term Memory Neural Networks and Fourier SynchroSqueezed Transform for Photovoltaic Power Forecasting
Accurate prediction of photovoltaic power is crucial to optimize its integration into the power grid. However, this task is highly complex due to the inherently stochastic nature of photovoltaic power generation data. To address this challenge, this paper proposes a novel hybrid framework that combines a Long Short-Term Memory network, the Fourier SynchroSqueezed Transform, and Bayesian Optimization. The model integrates the Fourier SynchroSqueezed Transform with the Long Short-Term Memory network to enhance the identification of very short-term patterns in photovoltaic power production. Additionally, Bayesian Optimization is employed to determine the most relevant hyperparameters for the Long Short-Term Memory network. The model was evaluated using real-world data from the Desert Knowledge Australian Solar Centre project considering different data segmentation sizes, ranging from 15 days to four months, and input types, including univariate and multivariate data, while varying the prediction horizon from five minutes to three days. Significant improvements in prediction accuracy were observed. For example, the Root Mean Squared Error for a 15-day data segmentation decreased by 19.48% when using multivariate inputs and by 29.59% for univariate inputs. For a four-month data segmentation, improvements reached 40.12% and 64.47%, respectively. Furthermore, the model demonstrated robust performance across various prediction horizons. For the 15-day segmentation, the Root Mean Squared Error ranged around 0.707 kW with an average power of 8.540 kW, while for the four-month segmentation, the error ranged around 0.467 kW with an average power of 4.733 kW. These results confirm the effectiveness and consistency of the proposed model in enhancing photovoltaic power forecasts across different time scales and data segmentations. The demonstrated ability to provide consistent and accurate predictions across multiple time horizons and data segmentations represents a significant advancement toward seamless integration of solar energy into the electricity grid.
- 15 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 124807-124823
Open AccessAn Optimized Hybrid Framework Based on Long-Short Term Memory Neural Networks and Fourier SynchroSqueezed Transform for Photovoltaic Power Forecasting
Accurate prediction of photovoltaic power is crucial to optimize its integration into the power grid. However, this task is highly complex due to the inherently stochastic nature of photovoltaic power generation data. To address this challenge, this paper proposes a novel hybrid framework that combines a Long Short-Term Memory network, the Fourier SynchroSqueezed Transform, and Bayesian Optimization. The model integrates the Fourier SynchroSqueezed Transform with the Long Short-Term Memory network to enhance the identification of very short-term patterns in photovoltaic power production. Additionally, Bayesian Optimization is employed to determine the most relevant hyperparameters for the Long Short-Term Memory network. The model was evaluated using real-world data from the Desert Knowledge Australian Solar Centre project considering different data segmentation sizes, ranging from 15 days to four months, and input types, including univariate and multivariate data, while varying the prediction horizon from five minutes to three days. Significant improvements in prediction accuracy were observed. For example, the Root Mean Squared Error for a 15-day data segmentation decreased by 19.48% when using multivariate inputs and by 29.59% for univariate inputs. For a four-month data segmentation, improvements reached 40.12% and 64.47%, respectively. Furthermore, the model demonstrated robust performance across various prediction horizons. For the 15-day segmentation, the Root Mean Squared Error ranged around 0.707 kW with an average power of 8.540 kW, while for the four-month segmentation, the error ranged around 0.467 kW with an average power of 4.733 kW. These results confirm the effectiveness and consistency of the proposed model in enhancing photovoltaic power forecasts across different time scales and data segmentations. The demonstrated ability to provide consistent and accurate predictions across multiple time horizons and data segmentations represents a significant advancement toward seamless integration of solar energy into the electricity grid.
- Open Access
- 13 May 2025
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 51 (6) , 7201-7214
Parallel Computing for Power Quality Disturbances Analysis and Energy Management in Distribution Power Networks
Power quality disturbances (PQDs) and energy management parameters (EMPs) pose significant operational challenges in radial distribution systems. Fast and accurate computational solutions are essential for efficient system performance. This study introduces a novel parallel computing approach for clustering-based PQD and EMP analysis, leveraging the density-based spatial clustering of applications with noise (DBSCAN) algorithm. The proposed method reduces processing times by more than 40% compared to sequential implementations, enabling real-time analysis and facilitating operator decision-making. A comparative evaluation with a parallel k-means approach reveals that k-means achieves slightly higher clustering efficiency, while DBSCAN provides automatic cluster selection. The methodology is validated on the IEEE 33-bus radial distribution system, where new correlations between PQD variations and their impact on EMPs are identified, offering insights for energy management optimization. The findings demonstrate that parallel computing enhances clustering performance, significantly improving computational efficiency and integration of PQD and EMP calculations for large-scale distribution networks.
- 13 May 2025
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 51 (6) , 7201-7214
Open AccessParallel Computing for Power Quality Disturbances Analysis and Energy Management in Distribution Power Networks
Power quality disturbances (PQDs) and energy management parameters (EMPs) pose significant operational challenges in radial distribution systems. Fast and accurate computational solutions are essential for efficient system performance. This study introduces a novel parallel computing approach for clustering-based PQD and EMP analysis, leveraging the density-based spatial clustering of applications with noise (DBSCAN) algorithm. The proposed method reduces processing times by more than 40% compared to sequential implementations, enabling real-time analysis and facilitating operator decision-making. A comparative evaluation with a parallel k-means approach reveals that k-means achieves slightly higher clustering efficiency, while DBSCAN provides automatic cluster selection. The methodology is validated on the IEEE 33-bus radial distribution system, where new correlations between PQD variations and their impact on EMPs are identified, offering insights for energy management optimization. The findings demonstrate that parallel computing enhances clustering performance, significantly improving computational efficiency and integration of PQD and EMP calculations for large-scale distribution networks.
- Open Access
- 1 August 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 14 (4) , 3768-3782
Analysis and classification of power quality disturbances using variational mode decomposition and hybrid particle swarm optimization
Power quality disturbances (PQD) threaten electrical power systems, especially in distributed generation with renewable energy sources and in smart grids where PQD takes a complex form. Providing accurate information on the status and characteristics of the electrical signal facilitates the identification of practical solutions to this threat. In this paper, a variational mode decomposition (VMD) signal processing tool is proposed to analyze complex PQD. In VMD, the input signal is decomposed into different band-limited intrinsic mode functions (IMF) or non-recursively reconstructed modes. The input signal analysis by VMD, which considers the frequency values and spectral decomposition for each mode, describes the changes in the input waveform, and the IMFs help extract the behavioral patterns of these disturbances. A new hybrid particle swarm optimization-technique for order of preference by similarity to ideal solution (PSO-TOPSIS) algorithm is also proposed to classify the disturbances based on the features extracted from the signals decomposed using VMD. The performance of this method is then extensively validated by using different PQDs (including complex, stationary, and non-stationary (PQDs) and through a comparison with deep learning methods, such as convolutional and recurrent neural networks. Results show that VMD has several advantages over Fourier, wavelet, and Stockwell transforms, such as its lack of any modal aliasing effect, its capability to diagnose disturbances across four noise levels, and its ability to separate harmonics from other events. The proposed VMD in combination with PSO-TOPSIS performs more accurately than the other methods across all noise levels.
- 1 August 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 14 (4) , 3768-3782
Open AccessAnalysis and classification of power quality disturbances using variational mode decomposition and hybrid particle swarm optimization
Power quality disturbances (PQD) threaten electrical power systems, especially in distributed generation with renewable energy sources and in smart grids where PQD takes a complex form. Providing accurate information on the status and characteristics of the electrical signal facilitates the identification of practical solutions to this threat. In this paper, a variational mode decomposition (VMD) signal processing tool is proposed to analyze complex PQD. In VMD, the input signal is decomposed into different band-limited intrinsic mode functions (IMF) or non-recursively reconstructed modes. The input signal analysis by VMD, which considers the frequency values and spectral decomposition for each mode, describes the changes in the input waveform, and the IMFs help extract the behavioral patterns of these disturbances. A new hybrid particle swarm optimization-technique for order of preference by similarity to ideal solution (PSO-TOPSIS) algorithm is also proposed to classify the disturbances based on the features extracted from the signals decomposed using VMD. The performance of this method is then extensively validated by using different PQDs (including complex, stationary, and non-stationary (PQDs) and through a comparison with deep learning methods, such as convolutional and recurrent neural networks. Results show that VMD has several advantages over Fourier, wavelet, and Stockwell transforms, such as its lack of any modal aliasing effect, its capability to diagnose disturbances across four noise levels, and its ability to separate harmonics from other events. The proposed VMD in combination with PSO-TOPSIS performs more accurately than the other methods across all noise levels.
- Open Access
- 1 January 2023
- Published by Walter de Gruyter GmbH in International Journal on Smart Sensing and Intelligent Systems
- Vol. 16 (1)
Performance Evaluation of ST-Based Methods for Simulating and Analyzing Power Quality Disturbances
The complexity of power quality disturbances (PQDs) is a significant risk factor in the electricity sector. An accurate and fast analysis of these disturbances provides crucial information to cover all the issues related to power quality. The main objective of this study is to explore a new analytic technique, including all kinds of disturbances that can appear in electrical networks, that differs from previous technologies such as the Fourier transform. Three methods based on the Stockwell transform, namely, the discrete orthonormal Stockwell transform (DOST), discrete cosine Stockwell transform (DCST), and discrete cosine transform (DCT), were used to analyze PQDs in time–frequency representation. These methods diagnose the disturbance's signal properties, which are dependent on resolution and absolute phase information. Nine PQDs, including normal sine waves, were mathematically modeled and used to evaluate the proposed methods. All the methods can effectively simulate and analyze PQDs. Among them, DOST is the most effective in providing clear and high-resolution time–frequency representations of signals. The classification of disturbances was fulfilled based on statistical features extracted from matrices derived from Stockwell transform-based methods, such as analytic approaches (mean, variation, standard deviation, entropy, skewness, and kurtosis). Neural networks, a method utilizing intelligence classifiers, were used for pattern recognition, and the patterns of the different methods were compared. Simulation results proved that DOST needs fewer samples than other methods; its capability to deal with signals in time–frequency resolution is also more viable. The neural network classifier has a higher accuracy rate than the K-nearest neighbor and decision tree methods and approximates the support vector machine method.
- 1 January 2023
- Published by Walter de Gruyter GmbH in International Journal on Smart Sensing and Intelligent Systems
- Vol. 16 (1)
Open AccessPerformance Evaluation of ST-Based Methods for Simulating and Analyzing Power Quality Disturbances
The complexity of power quality disturbances (PQDs) is a significant risk factor in the electricity sector. An accurate and fast analysis of these disturbances provides crucial information to cover all the issues related to power quality. The main objective of this study is to explore a new analytic technique, including all kinds of disturbances that can appear in electrical networks, that differs from previous technologies such as the Fourier transform. Three methods based on the Stockwell transform, namely, the discrete orthonormal Stockwell transform (DOST), discrete cosine Stockwell transform (DCST), and discrete cosine transform (DCT), were used to analyze PQDs in time–frequency representation. These methods diagnose the disturbance's signal properties, which are dependent on resolution and absolute phase information. Nine PQDs, including normal sine waves, were mathematically modeled and used to evaluate the proposed methods. All the methods can effectively simulate and analyze PQDs. Among them, DOST is the most effective in providing clear and high-resolution time–frequency representations of signals. The classification of disturbances was fulfilled based on statistical features extracted from matrices derived from Stockwell transform-based methods, such as analytic approaches (mean, variation, standard deviation, entropy, skewness, and kurtosis). Neural networks, a method utilizing intelligence classifiers, were used for pattern recognition, and the patterns of the different methods were compared. Simulation results proved that DOST needs fewer samples than other methods; its capability to deal with signals in time–frequency resolution is also more viable. The neural network classifier has a higher accuracy rate than the K-nearest neighbor and decision tree methods and approximates the support vector machine method.
- 9 July 2012
- Published by Elsevier in International Journal of Electrical Power & Energy Systems
- Vol. 43 (1) , 744-753
Improving measurement protocol efficiency through the use of ANN-based systems for overhead transmission lines
- 9 July 2012
- Published by Elsevier in International Journal of Electrical Power & Energy Systems
- Vol. 43 (1) , 744-753
Improving measurement protocol efficiency through the use of ANN-based systems for overhead transmission lines
- 1 May 2012
- Published by Elsevier in Electric Power Systems Research
- Vol. 86, 113-121
Rule-based classification of power quality disturbances using S-transform
- 1 May 2012
- Published by Elsevier in Electric Power Systems Research
- Vol. 86, 113-121
Rule-based classification of power quality disturbances using S-transform
- 1 February 2011
- Published by Elsevier in Electric Power Systems Research
- Vol. 81 (2) , 716-724
Hopfield–K-Means clustering algorithm: A proposal for the segmentation of electricity customers
- 1 February 2011
- Published by Elsevier in Electric Power Systems Research
- Vol. 81 (2) , 716-724
Hopfield–K-Means clustering algorithm: A proposal for the segmentation of electricity customers