Abdellah Shafieian

In this review, flat plate and concentrate-type solar collectors, integrated collector–storage systems, and solar water heaters combined with photovoltaic–thermal modules, solar-assisted heat pump solar water heaters, and solar water heaters using phase change materials are studied based on their thermal performance, cost, energy, and exergy efficiencies. The maximum water temperature and thermal efficiencies are enlisted to evaluate the thermal performance of the different solar water heaters. It is found that the solar water heaters’ performance is considerably improved by boosting water flow rate and tilt angle, modification of the shape and number of collectors, using wavy diffuse and electrodepositioned reflector coating, application of the corrugated absorber surface and coated absorber, use of turbulent enhancers, using thermal conductive working fluid and nanofluid, the inclusion of the water storage tank, and tank insulation. These items increase the heat transfer area and coefficient, thermal conductivity, the Reynolds and Nusselt numbers, heat transfer rate, and energy and exergy efficiencies. The evacuated tube heaters have a higher temperature compared to the collectors with a plane surface. Their thermal performance increases by using all-glass active circulation and heat pipe integration. The concentrative type of solar water heaters is superior to other solar heaters, particularly in achieving higher water temperatures. Their performance improves by using a rotating mirror concentrator. The integration of the system with energy storage components, phase change materials, or a heat pump provides a satisfactory performance over conventional solar water heaters. Graphical abstract Modification of solar water heaters

Photovoltaic/thermal systems are one of the most efficient types of solar collectors because they absorb solar radiation and generate electricity and heat simultaneously. For the first time, this paper presents an investigation into the impact of red wine-rGO/H₂O nanofluid and paraffin wax on the thermohydraulic properties of a photovoltaic/thermal system. The study focuses on three innovative nonlinear arrangements of the serpentine tubes. The effects of these materials and configurations are analyzed through numerical simulations. To improve the performance, environmentally friendly materials, including red wine-rGO/H₂O nanofluid and paraffin wax, have been used. Various performative parameters such as electrical and thermal efficiency of the photovoltaic/thermal system, exergy, and nanofluid concentration were investigated. The results demonstrated a significant enhancement in the system’s performance when using innovative serpentine tubes instead of simple tubes for the fluid flow path. The use of paraffin C18 increases electrical efficiency, while the use of paraffin C22 improves thermal efficiency. Moreover, the incorporation of phase change materials along with the utilization of innovative geometries in the serpentine tube led to a notable improvement in the outlet temperature of the fluid, increasing it by 2.43 K. Simultaneously, it substantially reduced the temperature of the photovoltaic cells, lowering it by 21.55 K. In addition, the new model demonstrated significant improvements in both thermal and electrical efficiency compared to the simple model. Specifically, the maximum thermal efficiency improvement reached 69.2%, while the maximum electrical efficiency improvement reached 11.7%.