Chenming Zhong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chenming Zhong has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Weijie Guo
National Innovation Platform for the Fusion of Industry and Education in Integrated Circuits, Department of Electronic Science, School of Electronic Science and Engineering, Xiamen University, Xiamen 361005, China
14 shared publications - Yijun Lu
National Innovation Platform for the Fusion of Industry and Education in Integrated Circuits, Department of Electronic Science, School of Electronic Science and Engineering, Xiamen University, Xiamen 361005, China
14 shared publications - Zhong Chen
Xiamen University
14 shared publications - Guolong Chen
National Innovation Platform for the Fusion of Industry and Education in Integrated Circuits, Department of Electronic Science, School of Electronic Science and Engineering, Xiamen University, Xiamen 361005, China
7 shared publications - Lihong Zhu
Xiamen University
7 shared publications - Xi Zheng
National Innovation Platform for the Fusion of Industry and Education in Integrated Circuits, Department of Electronic Science, School of Electronic Science and Engineering, Xiamen University, Xiamen, China
5 shared publications
Latest Publications
- 19 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (8) , 12516-12526
Nondestructive Batch Testing of Mini-LEDs Using Flexible Electrode Arrays
Miniaturized light-emitting diodes (LEDs) are commonly used in displays and lighting for their high brightness, low power consumption and long lifespan. However, their small scale and high-density integration create challenges for efficient, nondestructive inspection, particularly for simultaneous electrical and optical characterization. This article presents a batch detection method utilizing a flexible electrode array that enables stable and simultaneous contact with multiple mini-LED chips. The flexible electrodes ensure reliable electrical connectivity and precise alignment with low contact resistance and nondestructive probing capabilities. Experimental result demonstrates turn-on voltage deviations within 44.83 mV, mean relative errors below 3.28%, peak and dominant wavelength shifts of less than 0.3%, color coordinate variations of approximately 2%, correlated color temperature fluctuations around 0.8%, as well as average radiant power and luminous flux deviations under 2.8%. The proposed method enables accurate, repeatable, and high-throughput characterization, providing a robust solution for the inspection of mini-LED arrays.
- 19 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (8) , 12516-12526
Nondestructive Batch Testing of Mini-LEDs Using Flexible Electrode Arrays
Miniaturized light-emitting diodes (LEDs) are commonly used in displays and lighting for their high brightness, low power consumption and long lifespan. However, their small scale and high-density integration create challenges for efficient, nondestructive inspection, particularly for simultaneous electrical and optical characterization. This article presents a batch detection method utilizing a flexible electrode array that enables stable and simultaneous contact with multiple mini-LED chips. The flexible electrodes ensure reliable electrical connectivity and precise alignment with low contact resistance and nondestructive probing capabilities. Experimental result demonstrates turn-on voltage deviations within 44.83 mV, mean relative errors below 3.28%, peak and dominant wavelength shifts of less than 0.3%, color coordinate variations of approximately 2%, correlated color temperature fluctuations around 0.8%, as well as average radiant power and luminous flux deviations under 2.8%. The proposed method enables accurate, repeatable, and high-throughput characterization, providing a robust solution for the inspection of mini-LED arrays.
- 16 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (5) , 2873-2880
2-D Carrier Lifetime Mapping in Flip-Chip Green Mini-LEDs by Time-Gated Electroluminescence Microscopy
A time-gated electroluminescence microscopy method is developed to map the 2-D carrier lifetime distribution in flip-chip green mini-LEDs with micrometer-scale resolution. An in-depth analysis of the fitting model for the proposed method shows general agreement with the classical bi-exponential model. Pixel-level bi-exponential analysis yields fast and slow decay components, based on which an internal quantum efficiency (IQE) indicator is constructed and fused with the average lifetime image, enabling device classification into high-performance, trap-localized, and defect-cluster regions. The characteristics of the three regions are associated with underlying physical mechanisms and can be well explained. Correlating these microscopic characteristics with fabrication parameters provides methodological guidelines for low-damage etching, optimized passivation, improved dopant uniformity, and enhanced current injection, offering a comprehensive analysis framework for performance enhancement and reliability improvement of miniaturized LEDs.
- 16 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (5) , 2873-2880
2-D Carrier Lifetime Mapping in Flip-Chip Green Mini-LEDs by Time-Gated Electroluminescence Microscopy
A time-gated electroluminescence microscopy method is developed to map the 2-D carrier lifetime distribution in flip-chip green mini-LEDs with micrometer-scale resolution. An in-depth analysis of the fitting model for the proposed method shows general agreement with the classical bi-exponential model. Pixel-level bi-exponential analysis yields fast and slow decay components, based on which an internal quantum efficiency (IQE) indicator is constructed and fused with the average lifetime image, enabling device classification into high-performance, trap-localized, and defect-cluster regions. The characteristics of the three regions are associated with underlying physical mechanisms and can be well explained. Correlating these microscopic characteristics with fabrication parameters provides methodological guidelines for low-damage etching, optimized passivation, improved dopant uniformity, and enhanced current injection, offering a comprehensive analysis framework for performance enhancement and reliability improvement of miniaturized LEDs.
- 13 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (7) , 12233-12242
Capillary-Assisted Ultrafast and Large-Area Perovskite Nanocrystal Patterning Technology for Color Conversion Micro-LED Displays
Perovskite nanocrystals (PNCs) have shown great potential as color conversion layers (CCLs) for full-color micro-LED displays, offering high resolution, exceptional color purity, and an expanded color gamut. However, achieving large-area, time-efficient, and straightforward patterning of PNC arrays remains a significant challenge. Here, we propose capillary-assisted ultrafast PNC patterning (CAP) technology, depositing PNCs into laser-processed through-hole glass with micron-scale arrays via immersing the THG in the PNC colloids, capillary filling, and solvent evaporation processes. A 70 cm2 single-color PNC CCL is fabricated in about 2 min. Due to rational PNC design and the mild, nondestructive CAP process, the CCLs maintain high photoluminescence quantum yields after 100 days of ambient storage and 4 h of continuous blue-light irradiation. Finally, a 0.7 in. proof-of-concept full-color micro-LED panel, using CAP-fabricated red/green CCLs, exhibits excellent color conversion performance, highlighting its potential for scalable, high-quality PNC patterning in advanced displays.
- 13 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (7) , 12233-12242
Capillary-Assisted Ultrafast and Large-Area Perovskite Nanocrystal Patterning Technology for Color Conversion Micro-LED Displays
Perovskite nanocrystals (PNCs) have shown great potential as color conversion layers (CCLs) for full-color micro-LED displays, offering high resolution, exceptional color purity, and an expanded color gamut. However, achieving large-area, time-efficient, and straightforward patterning of PNC arrays remains a significant challenge. Here, we propose capillary-assisted ultrafast PNC patterning (CAP) technology, depositing PNCs into laser-processed through-hole glass with micron-scale arrays via immersing the THG in the PNC colloids, capillary filling, and solvent evaporation processes. A 70 cm2 single-color PNC CCL is fabricated in about 2 min. Due to rational PNC design and the mild, nondestructive CAP process, the CCLs maintain high photoluminescence quantum yields after 100 days of ambient storage and 4 h of continuous blue-light irradiation. Finally, a 0.7 in. proof-of-concept full-color micro-LED panel, using CAP-fabricated red/green CCLs, exhibits excellent color conversion performance, highlighting its potential for scalable, high-quality PNC patterning in advanced displays.
- 27 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-11
Active Autofocusing Method With Plane Tilt Correction for AR Microdisplay Inspection
An active autofocusing technology with plane tilt correction is proposed for the first time for use in display application scenarios. This technology is based on the variance of the Laplacian operator and machine vision principles. A deep learning-based multilayer perceptual classification neural network is proposed to quickly determine the tilt state of the plane and facilitate device–camera alignment. In testing, the neural network achieved 99.3% accuracy. The technology has demonstrated feasibility for leveling and focusing in commercial microdisplays for augmented reality (AR) applications within the micron-scale focus range through experimental validation. Our proposed autofocusing method is suitable for industrial inspection and offers the advantages of a lower risk of sample damage caused by auxiliary components and easy integration.
- 27 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-11
Active Autofocusing Method With Plane Tilt Correction for AR Microdisplay Inspection
An active autofocusing technology with plane tilt correction is proposed for the first time for use in display application scenarios. This technology is based on the variance of the Laplacian operator and machine vision principles. A deep learning-based multilayer perceptual classification neural network is proposed to quickly determine the tilt state of the plane and facilitate device–camera alignment. In testing, the neural network achieved 99.3% accuracy. The technology has demonstrated feasibility for leveling and focusing in commercial microdisplays for augmented reality (AR) applications within the micron-scale focus range through experimental validation. Our proposed autofocusing method is suitable for industrial inspection and offers the advantages of a lower risk of sample damage caused by auxiliary components and easy integration.
- 24 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (4) , 1839-1843
Highly Efficient AlGaInP-Based Micro-LEDs Achieved by Plasma Sidewall Treatment
The advancement of high-performance AlGaInP-based red micro-light-emitting diodes (micro-LEDs) has been significantly impeded by nonradiative recombination occurring at the sidewall surface, attributed to their extended carrier diffusion length. To address this issue, argon plasma treatment has been employed after dry etching of mesa to suppress the nonradiative recombination at sidewall, demonstrating that the external quantum efficiency (EQE) of micro-LEDs has been improved. The effectiveness of the argon plasma sidewall treatment was assessed through spatially resolved temperature-dependent carrier recombination dynamics.
- 24 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (4) , 1839-1843
Highly Efficient AlGaInP-Based Micro-LEDs Achieved by Plasma Sidewall Treatment
The advancement of high-performance AlGaInP-based red micro-light-emitting diodes (micro-LEDs) has been significantly impeded by nonradiative recombination occurring at the sidewall surface, attributed to their extended carrier diffusion length. To address this issue, argon plasma treatment has been employed after dry etching of mesa to suppress the nonradiative recombination at sidewall, demonstrating that the external quantum efficiency (EQE) of micro-LEDs has been improved. The effectiveness of the argon plasma sidewall treatment was assessed through spatially resolved temperature-dependent carrier recombination dynamics.
- 15 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-9
Accurate Measurement and Fast Prediction of Optothermal Properties of LED Arrays
In recent years, the utilization of light-emitting diode (LED) arrays in many applications has grown significantly. However, most of the conventional methods are only applicable to single-chip LED measurement. In multi-chip LED measurement, there is little consideration of the opto-thermal coupling among arrays under actual operating conditions, resulting in inaccurate measurement of opto-thermal parameters of LED arrays. In this work, we propose a method for accurate opto-thermal measurement based on phase-sensitive detection to independently extract the emission spectrum of the LED under test (LUT) from the entire emission array by injecting different duty cycle of pulse current into the LUT. The temperature sensitive parameter-full width at half maximum (FWHM) of LUT spectrum is utilized to determine the junction temperature. This method can accurately determine the opto-thermal distribution of LED arrays under actual operating conditions, regardless of chip size and packaging types. In addition, combining the lightweight Transformer network, the prediction of the opto-thermal distribution in LED arrays is significantly boosted within 20s with the Pearson correlation coefficients of the results better than 0.96. The proposed method is experimentally validated by two LED arrays, including junction temperature, thermal coupling and opto-thermal distribution among arrays.
- 15 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-9
Accurate Measurement and Fast Prediction of Optothermal Properties of LED Arrays
In recent years, the utilization of light-emitting diode (LED) arrays in many applications has grown significantly. However, most of the conventional methods are only applicable to single-chip LED measurement. In multi-chip LED measurement, there is little consideration of the opto-thermal coupling among arrays under actual operating conditions, resulting in inaccurate measurement of opto-thermal parameters of LED arrays. In this work, we propose a method for accurate opto-thermal measurement based on phase-sensitive detection to independently extract the emission spectrum of the LED under test (LUT) from the entire emission array by injecting different duty cycle of pulse current into the LUT. The temperature sensitive parameter-full width at half maximum (FWHM) of LUT spectrum is utilized to determine the junction temperature. This method can accurately determine the opto-thermal distribution of LED arrays under actual operating conditions, regardless of chip size and packaging types. In addition, combining the lightweight Transformer network, the prediction of the opto-thermal distribution in LED arrays is significantly boosted within 20s with the Pearson correlation coefficients of the results better than 0.96. The proposed method is experimentally validated by two LED arrays, including junction temperature, thermal coupling and opto-thermal distribution among arrays.
- 16 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (19) , 30522-30529
UWB-Based AOA Indoor Position-Tracking System and Data Processing Algorithm
A position tracking system and data processing algorithm based on the angle of arrival are innovatively proposed to reduce the system’s static error and filter abnormal data due to occlusion in the communication path. The mechanism of filtering abnormal data and determining thresholds through algorithms has been investigated in principle. The comparative analysis of the measured data employing the extended Kalman and median filtering algorithms, respectively, highlights the advantages of the proposed algorithms in processing the data. The algorithm can effectively eliminate abnormal data points in the measured original data, reduce the unstable jitter of the base station rotation, and facilitate the angle data to meet the requirements of the base station rotation control.
- 16 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (19) , 30522-30529
UWB-Based AOA Indoor Position-Tracking System and Data Processing Algorithm
A position tracking system and data processing algorithm based on the angle of arrival are innovatively proposed to reduce the system’s static error and filter abnormal data due to occlusion in the communication path. The mechanism of filtering abnormal data and determining thresholds through algorithms has been investigated in principle. The comparative analysis of the measured data employing the extended Kalman and median filtering algorithms, respectively, highlights the advantages of the proposed algorithms in processing the data. The algorithm can effectively eliminate abnormal data points in the measured original data, reduce the unstable jitter of the base station rotation, and facilitate the angle data to meet the requirements of the base station rotation control.
- 29 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-9
Study on the Carrier Lifetime of RGB Mini-Light-Emitting Diodes Based on Phase-Sensitive Detection
A differential carrier lifetime (DLT) measurement method with a measurement current as low as 0.1 mA, high noise immunity, and low measurement error has been proposed for the first time for electroluminescent LEDs, which can also obtain the junction capacitance and differential resistance of LEDs. The method is based on the rate equation and phase-sensitive detection technology. The relationship between the DLT of red, green, and blue mini-LEDs and the injected current density was investigated with the proposed method. The DLT of the same LED decreases as the injected current density increases. The DLT of green mini-LEDs drops faster than that of blue mini-LEDs as the injected current density increases.
- 29 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-9
Study on the Carrier Lifetime of RGB Mini-Light-Emitting Diodes Based on Phase-Sensitive Detection
A differential carrier lifetime (DLT) measurement method with a measurement current as low as 0.1 mA, high noise immunity, and low measurement error has been proposed for the first time for electroluminescent LEDs, which can also obtain the junction capacitance and differential resistance of LEDs. The method is based on the rate equation and phase-sensitive detection technology. The relationship between the DLT of red, green, and blue mini-LEDs and the injected current density was investigated with the proposed method. The DLT of the same LED decreases as the injected current density increases. The DLT of green mini-LEDs drops faster than that of blue mini-LEDs as the injected current density increases.