Quang. K. Nguyen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Quang. K. Nguyen has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
- Anh-Tuan Vu
Hanoi University of Science and Technology
7 shared publications Giang H. Le
Institute of Chemistry, Vietnam Academy of Science and Technology, 18 Hoang Quoc Viet street, Cau Giay, Ha Noi, Viet Nam
4 shared publicationsGiang H Le
3 shared publicationsKien T Nguyen
3 shared publicationsPhuong T Dang
3 shared publicationsCanh D. Dao
Department of Surface Chemistry, Institute of Chemistry, Vietnam Academy of Science and Technology (VAST), 18 Hoang Quoc Viet, Cau Giay District, Hanoi, Vietnam
2 shared publications
Latest Publications
- 11 February 2025
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 335
Impact of transition metals (M=Mn, Fe, Co, Ni, Cu, Zn) on the formation of local and crystal structure of MBTC phases
- 11 February 2025
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 335
Impact of transition metals (M=Mn, Fe, Co, Ni, Cu, Zn) on the formation of local and crystal structure of MBTC phases
- Open Access
Design of Metal-Organic Polymers MIL-53(M3+): Preparation and Characterization of MIL-53(Fe) and Graphene Oxide Composite
This article presents a crystal chemical analysis, generalization, and systematization of structural characteristics of metal-organic polymers MIL-53(M3+) with M = Al, Cr, Ga, and Fe. The division of the MIL-53(M3+) structures into a morphotropic series was performed, which made it possible to predict the formation of new compounds or solid solutions with the corresponding composition and structure. The change in the symmetry of MIL-53(M3+) and the causes of polymorphs formation are explained on the basis of crystal chemical rules. The efficiency of the revealed regularities in the structural characteristics of the MIL-53(M3+) phases were experimentally confirmed for MIL-53(Fe) and composite MIL-53(Fe)/GO (GO-graphene oxide) by several methods (powder X-ray, X-ray absorption, and photoelectron spectroscopy). For the first time, different coordination numbers (CN) (CNFe = 4.9 for MIL-53(Fe)—two types of coordination polyhedra with CNFe = 6 and CNFe = 4; CNFe = 4 for MIL-53 (Fe3+)/GO) and the formal charges (FC) of iron ions (variable FC of Fe (2+δ)+ in MIL-53(Fe3+) and Fe2+ in MIL-53(Fe3+)/GO) were found. These experimental data explain the higher photocatalytic activity of MIL-53(Fe3+)/GO in photo-Fenton reactions—RR195 decomposition.
Open AccessDesign of Metal-Organic Polymers MIL-53(M3+): Preparation and Characterization of MIL-53(Fe) and Graphene Oxide Composite
This article presents a crystal chemical analysis, generalization, and systematization of structural characteristics of metal-organic polymers MIL-53(M3+) with M = Al, Cr, Ga, and Fe. The division of the MIL-53(M3+) structures into a morphotropic series was performed, which made it possible to predict the formation of new compounds or solid solutions with the corresponding composition and structure. The change in the symmetry of MIL-53(M3+) and the causes of polymorphs formation are explained on the basis of crystal chemical rules. The efficiency of the revealed regularities in the structural characteristics of the MIL-53(M3+) phases were experimentally confirmed for MIL-53(Fe) and composite MIL-53(Fe)/GO (GO-graphene oxide) by several methods (powder X-ray, X-ray absorption, and photoelectron spectroscopy). For the first time, different coordination numbers (CN) (CNFe = 4.9 for MIL-53(Fe)—two types of coordination polyhedra with CNFe = 6 and CNFe = 4; CNFe = 4 for MIL-53 (Fe3+)/GO) and the formal charges (FC) of iron ions (variable FC of Fe (2+δ)+ in MIL-53(Fe3+) and Fe2+ in MIL-53(Fe3+)/GO) were found. These experimental data explain the higher photocatalytic activity of MIL-53(Fe3+)/GO in photo-Fenton reactions—RR195 decomposition.
- 1 October 2021
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 420, 126560
Bimetallic Ag-Zn-BTC/GO composite as highly efficient photocatalyst in the photocatalytic degradation of reactive yellow 145 dye in water
- 1 October 2021
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 420, 126560
Bimetallic Ag-Zn-BTC/GO composite as highly efficient photocatalyst in the photocatalytic degradation of reactive yellow 145 dye in water
- Open Access
- 1 December 2019
- Published by Wiley in Vietnam Journal of Chemistry
- Vol. 57 (6) , 681-685
Synthesis and application of novel Fe‐MIL‐53/GO nanocomposite for photocatalytic degradation of reactive dye from aqueous solution
The composite of Fe‐MIL‐53 and graphene oxide (GO) was successfully prepared using solvothermal method to crystallize Fe‐MIL‐53 on GO layers. The Fe‐MIL‐53/GO composite was characterized by XRD, isotherms of N2 adsorption– desorption (BET), TEM, FTIR, and Energy dispersive X‐Ray (EDX). From TEM result, it revealed the formation of very small Fe‐MIL‐53 particles of 10 ‐20 nm well dispersed on GO surface. The photocatalytic activity of Fe‐MIL‐53/GO nanocomposite for the degradation of reactive dye (reactive red‐RR195) in aqueous solution was examined and evaluate. The red‐RR195 removal efficiency reached 96 % after 60 min of reaction under irradiation of simulated sunlight, indicating highly photocatalytic activity of this nano composite. In addition, this composite also showed much higher photocatalytic activity as compared to that of pure Fe‐MIL‐53, this clearly indicated the synergistic effect between Fe‐MIL‐53 and GO. Therefore, the novel Fe‐MIL‐53/GO can be considered as a highly efficient photocatalyst for degradation of reactive dye from aqueous solution.
- 1 December 2019
- Published by Wiley in Vietnam Journal of Chemistry
- Vol. 57 (6) , 681-685
Open AccessSynthesis and application of novel Fe‐MIL‐53/GO nanocomposite for photocatalytic degradation of reactive dye from aqueous solution
The composite of Fe‐MIL‐53 and graphene oxide (GO) was successfully prepared using solvothermal method to crystallize Fe‐MIL‐53 on GO layers. The Fe‐MIL‐53/GO composite was characterized by XRD, isotherms of N2 adsorption– desorption (BET), TEM, FTIR, and Energy dispersive X‐Ray (EDX). From TEM result, it revealed the formation of very small Fe‐MIL‐53 particles of 10 ‐20 nm well dispersed on GO surface. The photocatalytic activity of Fe‐MIL‐53/GO nanocomposite for the degradation of reactive dye (reactive red‐RR195) in aqueous solution was examined and evaluate. The red‐RR195 removal efficiency reached 96 % after 60 min of reaction under irradiation of simulated sunlight, indicating highly photocatalytic activity of this nano composite. In addition, this composite also showed much higher photocatalytic activity as compared to that of pure Fe‐MIL‐53, this clearly indicated the synergistic effect between Fe‐MIL‐53 and GO. Therefore, the novel Fe‐MIL‐53/GO can be considered as a highly efficient photocatalyst for degradation of reactive dye from aqueous solution.
- 10 July 2018
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 27 (8) , 4225-4234
High Catalytic Activity of Phenol Photodegradation from Aqueous Solution with Novel Fe-Fe3O4-GO Nanocomposite
- 10 July 2018
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 27 (8) , 4225-4234
High Catalytic Activity of Phenol Photodegradation from Aqueous Solution with Novel Fe-Fe3O4-GO Nanocomposite
- 1 March 2017
- Published by IOP Publishing in Materials Research Express
- Vol. 4 (3) , 035038
Highly photocatalytic activity of novel Fe-MIL-88B/GO nanocomposite in the degradation of reactive dye from aqueous solution
- 1 March 2017
- Published by IOP Publishing in Materials Research Express
- Vol. 4 (3) , 035038
Highly photocatalytic activity of novel Fe-MIL-88B/GO nanocomposite in the degradation of reactive dye from aqueous solution
- 1 February 2017
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 17 (2) , 947-953
Immobilization of D-Amino Acid Oxidase (DAAO) Enzyme on Hybrid Mesoporous MCF, SBA-15 and MCM-41 Nanomaterials
Hybrid mesoporous materials as carriers for immobilization of D-amino acid oxidase (DAAO) were prepared via three steps: (i) hydrothermal synthesis of nanoporous MCF, SBA-15 and MCM-41 powders, (ii) functionalization with 3-aminopropyltriethoxysilane (APTES) by post-synthesis grafting; and (iii) activation with glutardialdehyde. The resulting mesostructured solids were characterized by various techniques: XRD, IR, TGA-DTA and N2 adsorption–desorption (BET). The characterization results indicated that these materials still maintained their structure after functionalization. IR data and TGA-DTA analysis demonstrated the existence of amine functional groups on the surface of APTES-functionalized samples. The DAAO immobilized on these materials exhibited higher catalytic activity and stability of enzyme for conversion of cephalosporin C (CPC) as compared to those of the non-functionalized ones. The catalytic activity and stability of enzyme decreased in the order MCF > SBA-15 > MCM-41.
- 1 February 2017
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 17 (2) , 947-953
Immobilization of D-Amino Acid Oxidase (DAAO) Enzyme on Hybrid Mesoporous MCF, SBA-15 and MCM-41 Nanomaterials
Hybrid mesoporous materials as carriers for immobilization of D-amino acid oxidase (DAAO) were prepared via three steps: (i) hydrothermal synthesis of nanoporous MCF, SBA-15 and MCM-41 powders, (ii) functionalization with 3-aminopropyltriethoxysilane (APTES) by post-synthesis grafting; and (iii) activation with glutardialdehyde. The resulting mesostructured solids were characterized by various techniques: XRD, IR, TGA-DTA and N2 adsorption–desorption (BET). The characterization results indicated that these materials still maintained their structure after functionalization. IR data and TGA-DTA analysis demonstrated the existence of amine functional groups on the surface of APTES-functionalized samples. The DAAO immobilized on these materials exhibited higher catalytic activity and stability of enzyme for conversion of cephalosporin C (CPC) as compared to those of the non-functionalized ones. The catalytic activity and stability of enzyme decreased in the order MCF > SBA-15 > MCM-41.
- 1 October 2016
- Published by IOP Publishing in Materials Research Express
- Vol. 3 (10) , 105603
Removal of Cd2+ and Cu2+ ions from aqueous solution by using Fe–Fe3O4/graphene oxide as a novel and efficient adsorbent
The nano Fe–Fe3O4/graphene oxide (GO) was successfully synthesized by the precipitation method and followed by chemical reduction using FeCl3 as iron sources and NaBH4 as reducing agent. The products were characterized by x-ray diffraction (XRD), Fourier transform infrared spectroscopy, transmission electron microscopy (TEM), BET, x-ray photoelectron spectroscopy (XPS) and VMS. From the obtained XRD and XPS results, it revealed the formation of both Fe and Fe3O4 nano particles on GO surface. TEM images showed that both Fe3O4/GO and Fe–Fe3O4/GO had small particle size of 10–20 nm and uniform size distribution. Fe3O4/GO and Fe–Fe3O4/GO were used as adsorbents for removal of Cd2+ and Cu2+ ions from aqueous solution. Maximum adsorption capacity (Q max) of Fe–Fe3O4/GO for Cu2+ and Cd2+ are 90.0 mg g−1 and 108.6 mg g−1, respectively. These values are much higher as compared to those of Fe3O4/GO as well as those reported in the literature. Additionally, this novel adsorbent can be reused by washing with diluted Hcl solution and easily recovered by applying the magnetic field. The Cd2+ adsorption isotherm fits better for the Langmuir model that of the Freundlich model and it obeys the pseudo-second order kinetic equation.
- 1 October 2016
- Published by IOP Publishing in Materials Research Express
- Vol. 3 (10) , 105603
Removal of Cd2+ and Cu2+ ions from aqueous solution by using Fe–Fe3O4/graphene oxide as a novel and efficient adsorbent
The nano Fe–Fe3O4/graphene oxide (GO) was successfully synthesized by the precipitation method and followed by chemical reduction using FeCl3 as iron sources and NaBH4 as reducing agent. The products were characterized by x-ray diffraction (XRD), Fourier transform infrared spectroscopy, transmission electron microscopy (TEM), BET, x-ray photoelectron spectroscopy (XPS) and VMS. From the obtained XRD and XPS results, it revealed the formation of both Fe and Fe3O4 nano particles on GO surface. TEM images showed that both Fe3O4/GO and Fe–Fe3O4/GO had small particle size of 10–20 nm and uniform size distribution. Fe3O4/GO and Fe–Fe3O4/GO were used as adsorbents for removal of Cd2+ and Cu2+ ions from aqueous solution. Maximum adsorption capacity (Q max) of Fe–Fe3O4/GO for Cu2+ and Cd2+ are 90.0 mg g−1 and 108.6 mg g−1, respectively. These values are much higher as compared to those of Fe3O4/GO as well as those reported in the literature. Additionally, this novel adsorbent can be reused by washing with diluted Hcl solution and easily recovered by applying the magnetic field. The Cd2+ adsorption isotherm fits better for the Langmuir model that of the Freundlich model and it obeys the pseudo-second order kinetic equation.
- Open Access
- 1 January 2016
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2016, 1-9
Ordered Mesoporous Carbons as Novel and Efficient Adsorbent for Dye Removal from Aqueous Solution
Ordered mesoporous carbons (OMCs) were successfully synthesized by using hard template and soft template methods. These materials were characterized by XRD, TEM, and N2adsorption-desorption Brunauer-Emmett-Teller (BET). From the obtained results, it is revealed that the obtained OMCs samples showed high surface area (>1000 m2/g) with high pore volume, mainly mesopore volume (1.2–2.4 cm3/g). Moreover, OMCs samples had similar structure of the SBA-15 silica and exhibited high MB adsorption capacity withof 398 mgg−1for OMCs synthesis with hard template and 476 mgg−1for OMCs synthesis with soft template, respectively. From kinetics investigation, it is confirmed that MB adsorption from aqueous solution obeys the pseudo-second-order kinetic equation.- 1 January 2016
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2016, 1-9
Open AccessOrdered Mesoporous Carbons as Novel and Efficient Adsorbent for Dye Removal from Aqueous Solution
Ordered mesoporous carbons (OMCs) were successfully synthesized by using hard template and soft template methods. These materials were characterized by XRD, TEM, and N2adsorption-desorption Brunauer-Emmett-Teller (BET). From the obtained results, it is revealed that the obtained OMCs samples showed high surface area (>1000 m2/g) with high pore volume, mainly mesopore volume (1.2–2.4 cm3/g). Moreover, OMCs samples had similar structure of the SBA-15 silica and exhibited high MB adsorption capacity withof 398 mgg−1for OMCs synthesis with hard template and 476 mgg−1for OMCs synthesis with soft template, respectively. From kinetics investigation, it is confirmed that MB adsorption from aqueous solution obeys the pseudo-second-order kinetic equation. - Top Cited Papers
- 17 December 2014
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (7) , 5261-5268
Arsenic removal from aqueous solutions by adsorption using novel MIL-53(Fe) as a highly efficient adsorbent
A MIL-53(Fe) analogue was successfully synthesized by a HF free-solvothermal method. The sample was characterized by XRD, N2 adsorption (BET), TEM, FTIR, XPS and AAS. From the N2 adsorption–desorption isotherms, it can be seen that the structure of MIL-53(Fe) in the anhydrous form exhibits closed pores with almost no accessible porosity to nitrogen gas. The XPS results reveal that Fe is really incorporated into the MIL-53(Fe) framework. In the hydrated form, the pores of MIL-53(Fe) are filled with water molecules. Thus, MIL-53(Fe) exhibited a very high adsorption capacity of As(V) in aqueous solution (Qmax of 21.27 mg g−1). Adsorption kinetics data revealed that As(V) adsorption isotherms fit the Langmuir model and obey the pseudo-second-order kinetic equation.
- 17 December 2014
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (7) , 5261-5268
Top Cited PapersArsenic removal from aqueous solutions by adsorption using novel MIL-53(Fe) as a highly efficient adsorbent
A MIL-53(Fe) analogue was successfully synthesized by a HF free-solvothermal method. The sample was characterized by XRD, N2 adsorption (BET), TEM, FTIR, XPS and AAS. From the N2 adsorption–desorption isotherms, it can be seen that the structure of MIL-53(Fe) in the anhydrous form exhibits closed pores with almost no accessible porosity to nitrogen gas. The XPS results reveal that Fe is really incorporated into the MIL-53(Fe) framework. In the hydrated form, the pores of MIL-53(Fe) are filled with water molecules. Thus, MIL-53(Fe) exhibited a very high adsorption capacity of As(V) in aqueous solution (Qmax of 21.27 mg g−1). Adsorption kinetics data revealed that As(V) adsorption isotherms fit the Langmuir model and obey the pseudo-second-order kinetic equation.