Yaping Zhao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yaping Zhao has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Haoling Ren
College of Mechanical Engineering and Automation, Huaqiao University, Xiamen 361021, China
2 shared publications - Jiangdong Wu
College of Mechanical Engineering and Automation, Huaqiao University, Xiamen 361021, China
2 shared publications - Tianliang Lin
Fujian Key Laboratory of Green Intelligent Drive and Transmission for Mobile Machinery, Xiamen 361021, China
2 shared publications
Latest Publications
- Open Access
- 23 July 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (14) , 8496
Research on Multi-Sensor Simultaneous Localization and Mapping Technology for Complex Environment of Construction Machinery
Simultaneous localization and mapping (SLAM), as a key task of unmanned vehicles for construction machinery, is of great significance for later path planning and control. Construction tasks in the engineering field are mostly carried out in bridges, tunnels, open fields, etc. The prominent features of these environments are high scene similarity, few geometric features, and large-scale repetitive texture information, which is prone to sensor detection degradation. This leads to positioning drift and map building failure. The traditional method of motion estimation and 3D reconstruction uses a single sensor, which lacks enough information, has poor adaptability to the environment, and cannot guarantee good positioning accuracy and robustness in complex environments. Currently, the strategy of multi-sensor fusion is proven to be an effective solution and is widely studied. This paper proposes a SLAM framework that integrates LiDAR, IMU, and camera. It tightly couples the texture information observed by camera, the geometric information scanned by LiDAR, and the measured value of IMU, allowing visual-inertial odometry (VIO) and LiDAR-inertial odometry (LIO) common implementation. The LIO subsystem extracts point cloud features and matches them with the global map. The obtained pose estimation can be used for the initialization of the VIO subsystem. The VIO system uses direct method to minimize the photometric error and IMU measurement error between images to estimate the pose of the robot and the geometric structure of the scene. The two subsystems assist each other to perform pose estimation, and can operate normally even when any subsystem fails. A factor graph is used to combine all constraints to achieve global pose optimization. Keyframe and sliding window strategies are used to ensure real-time performance. Through real-vehicle testing, the system can perform incremental and real-time state estimation and reconstruct a dense 3D point cloud map, which can effectively solve the problems of positioning drift and mapping failure in the lack of geometric features or challenging construction environments.
- 23 July 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (14) , 8496
Open AccessResearch on Multi-Sensor Simultaneous Localization and Mapping Technology for Complex Environment of Construction Machinery
Simultaneous localization and mapping (SLAM), as a key task of unmanned vehicles for construction machinery, is of great significance for later path planning and control. Construction tasks in the engineering field are mostly carried out in bridges, tunnels, open fields, etc. The prominent features of these environments are high scene similarity, few geometric features, and large-scale repetitive texture information, which is prone to sensor detection degradation. This leads to positioning drift and map building failure. The traditional method of motion estimation and 3D reconstruction uses a single sensor, which lacks enough information, has poor adaptability to the environment, and cannot guarantee good positioning accuracy and robustness in complex environments. Currently, the strategy of multi-sensor fusion is proven to be an effective solution and is widely studied. This paper proposes a SLAM framework that integrates LiDAR, IMU, and camera. It tightly couples the texture information observed by camera, the geometric information scanned by LiDAR, and the measured value of IMU, allowing visual-inertial odometry (VIO) and LiDAR-inertial odometry (LIO) common implementation. The LIO subsystem extracts point cloud features and matches them with the global map. The obtained pose estimation can be used for the initialization of the VIO subsystem. The VIO system uses direct method to minimize the photometric error and IMU measurement error between images to estimate the pose of the robot and the geometric structure of the scene. The two subsystems assist each other to perform pose estimation, and can operate normally even when any subsystem fails. A factor graph is used to combine all constraints to achieve global pose optimization. Keyframe and sliding window strategies are used to ensure real-time performance. Through real-vehicle testing, the system can perform incremental and real-time state estimation and reconstruct a dense 3D point cloud map, which can effectively solve the problems of positioning drift and mapping failure in the lack of geometric features or challenging construction environments.
- Open Access
- 16 June 2023
- Published by MDPI AG in Preprints.org
Research on Multi-Sensor SLAM Technology for Complex Environment of Construction Machinery
Unmanned construction machinery vehicles mostly carry work in bridges, tunnels, and outdoor open spaces. Obtaining accurate pose estimation of the entire vehicle and establishing a map of the surrounding environment is of great significance for path planning and control in the later stage. Traditional simultaneous localization and mapping (SLAM) schemes, which mostly use a single sensor, but there are problems with localization drift and mapping failure in scenarios where there are few geometric features and the environment is prone to degradation. Currently, the multi-sensor fusion strategy has been proven to be an effective solution and widely used in the field of unmanned vehicle localization and mapping. This paper proposes a SLAM framework that tightly couples a LiDAR, IMU and camera to achieve accurate and reliable pose estimation. The framework is based on LiDAR-inertial system(LIS) and factor graph optimization theory. Texture information provided by vision is integrated into the LiDAR-inertial odometry to generate a new visual-inertial subsystem(VIS).The two subsystems, VIS and LIS, can assist each other and work jointly. Through real vehicle tests, the system can perform incremental, real-time state estimation, reconstruct dense 3D point cloud maps,and effectively solve the problems of localization drift and mapping failure in the lack of geometric features or challenging construction environments. Meanwhile, the system has a safety redundancy mechanism. When any subsystem fails, the system can also operate normally, to ensure the reliability and robustness of vehicle positioning.
- 16 June 2023
- Published by MDPI AG in Preprints.org
Open AccessResearch on Multi-Sensor SLAM Technology for Complex Environment of Construction Machinery
Unmanned construction machinery vehicles mostly carry work in bridges, tunnels, and outdoor open spaces. Obtaining accurate pose estimation of the entire vehicle and establishing a map of the surrounding environment is of great significance for path planning and control in the later stage. Traditional simultaneous localization and mapping (SLAM) schemes, which mostly use a single sensor, but there are problems with localization drift and mapping failure in scenarios where there are few geometric features and the environment is prone to degradation. Currently, the multi-sensor fusion strategy has been proven to be an effective solution and widely used in the field of unmanned vehicle localization and mapping. This paper proposes a SLAM framework that tightly couples a LiDAR, IMU and camera to achieve accurate and reliable pose estimation. The framework is based on LiDAR-inertial system(LIS) and factor graph optimization theory. Texture information provided by vision is integrated into the LiDAR-inertial odometry to generate a new visual-inertial subsystem(VIS).The two subsystems, VIS and LIS, can assist each other and work jointly. Through real vehicle tests, the system can perform incremental, real-time state estimation, reconstruct dense 3D point cloud maps,and effectively solve the problems of localization drift and mapping failure in the lack of geometric features or challenging construction environments. Meanwhile, the system has a safety redundancy mechanism. When any subsystem fails, the system can also operate normally, to ensure the reliability and robustness of vehicle positioning.