Zehao Hou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zehao Hou has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Junyi Cao
Key Laboratory of Education Ministry for Modern Design and Rotor-Bearing System, School of Mechanical Engineering, Xian Jiaotong University, Xian, China
3 shared publications - Kangqi Fan
School of Mechano-Electronic Engineering, Xidian University, Xi’an 710071, People’s Republic of China
3 shared publications - Wei-Hsin Liao
Department of Mechanical and Automation Engineering The Chinese University of Hong Kong Hong Kong China
3 shared publications - Christopher Rhys Bowen
Department of Mechanical Engineering, University of Bath, Claverton Down, Bath BA2 7AY, UK
2 shared publications Hongyuan Zhao
2 shared publications- Huan Zhao
Affiliations Department of Neurology, The First Affiliated Hospital of Xi’an Jiaotong University, Xi’an, P.R. China, School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an, P.R. China, Department of Mechanical and Automation Engineering, The Chinese University of Hong Kong, Shatin, N.T., Hong Kong, China
2 shared publications
Latest Publications
- 1 July 2026
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 18 (4)
Impact of ground heat exchangers on photovoltaic/thermal system: Energy, exergy, economic, and environment analysis
This research investigates integration of photovoltaic/thermal (PV/T) systems and ground heat exchangers (GHX) enhanced by phase change material (PCM). Leveraging the stable thermal properties of the ground for effective heat dissipation and storage, the integration system can address the limitations of standalone PV and PV/T such as cell overheating or suboptimal energy utilization. Therefore, the proposed PV/T-GHX system is compared with conventional PV system by conducting comprehensive energy, exergy, economic, and environmental (4E) analysis. The study results demonstrate that the PV/T-GHX system achieves great PV cell temperature reduction with average of 2.06 °C in warm months and 1.23 °C in colder months, gaining annual power generation by 28.5% over conventional PV/T systems. The system reaches peak thermal efficiency of 51% in summer with utilizing underground soil for stable thermal energy storage. Economically, the proposed system exhibits a short payback period of 1.65 years and a higher life cycle exergy efficiency of 41.8%. It also reduces the carbon emissions by 2.9 times compared to conventional PV systems. The 4E framework emphasizes the system's ability to adapt to seasonal fluctuations, cost-effectiveness, and capacity to fulfill energy needs while decreasing environmental impact. The present research promotes sustainable energy solutions by using PCM-enhanced GHX technology, providing policymakers and practitioners with meaningful insights into integrated renewable energy utilization.
- 1 July 2026
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 18 (4)
Impact of ground heat exchangers on photovoltaic/thermal system: Energy, exergy, economic, and environment analysis
This research investigates integration of photovoltaic/thermal (PV/T) systems and ground heat exchangers (GHX) enhanced by phase change material (PCM). Leveraging the stable thermal properties of the ground for effective heat dissipation and storage, the integration system can address the limitations of standalone PV and PV/T such as cell overheating or suboptimal energy utilization. Therefore, the proposed PV/T-GHX system is compared with conventional PV system by conducting comprehensive energy, exergy, economic, and environmental (4E) analysis. The study results demonstrate that the PV/T-GHX system achieves great PV cell temperature reduction with average of 2.06 °C in warm months and 1.23 °C in colder months, gaining annual power generation by 28.5% over conventional PV/T systems. The system reaches peak thermal efficiency of 51% in summer with utilizing underground soil for stable thermal energy storage. Economically, the proposed system exhibits a short payback period of 1.65 years and a higher life cycle exergy efficiency of 41.8%. It also reduces the carbon emissions by 2.9 times compared to conventional PV systems. The 4E framework emphasizes the system's ability to adapt to seasonal fluctuations, cost-effectiveness, and capacity to fulfill energy needs while decreasing environmental impact. The present research promotes sustainable energy solutions by using PCM-enhanced GHX technology, providing policymakers and practitioners with meaningful insights into integrated renewable energy utilization.
- 29 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. PP (10834435) , 1-11
EMG-Informed Musculoskeletal Modeling for Joint Stiffness Estimation Toward Rehabilitation Robot
Joint stiffness estimation of the human arm is a critical challenge for objective motor function assessment and human–robot interaction (HRI) of a rehabilitation robot. Perturbation-based methods are limited by their intermittent nature, whereas data-driven approaches often suffer from poor generalization and a lack of transparency. To bridge this gap, an electromyogram-informed musculoskeletal modeling (EMM) method is proposed to enable physiologically plausible estimation of joint stiffness. An analytical biceps–triceps antagonistic musculoskeletal model is developed, from which a muscle Jacobian matrix is derived to map contraction-aware muscle stiffness to joint space. Crucially, to ensure accurate personalization, a sensitivity-guided parameter tuning strategy is introduced, calibrating the model using only static isometric torque data without requiring extensive stiffness perturbation measurements. The method is validated through HRI experiments with nine participants and benchmarked against two subject-specific data-driven models. Results demonstrate that the EMM achieves high estimation accuracy (root-mean-square error (RMSE): 1.78 ± 0.41 Nm/rad, R2: 0.9763 ± 0.0089) and superior stability (lower error variance) compared to the benchmarks. Furthermore, the method successfully decouples the contributions of passive geometry and active neural drive to stiffness modulation, offering a robust, analytically efficient tool for rehabilitation robotics.
- 29 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. PP (10834435) , 1-11
EMG-Informed Musculoskeletal Modeling for Joint Stiffness Estimation Toward Rehabilitation Robot
Joint stiffness estimation of the human arm is a critical challenge for objective motor function assessment and human–robot interaction (HRI) of a rehabilitation robot. Perturbation-based methods are limited by their intermittent nature, whereas data-driven approaches often suffer from poor generalization and a lack of transparency. To bridge this gap, an electromyogram-informed musculoskeletal modeling (EMM) method is proposed to enable physiologically plausible estimation of joint stiffness. An analytical biceps–triceps antagonistic musculoskeletal model is developed, from which a muscle Jacobian matrix is derived to map contraction-aware muscle stiffness to joint space. Crucially, to ensure accurate personalization, a sensitivity-guided parameter tuning strategy is introduced, calibrating the model using only static isometric torque data without requiring extensive stiffness perturbation measurements. The method is validated through HRI experiments with nine participants and benchmarked against two subject-specific data-driven models. Results demonstrate that the EMM achieves high estimation accuracy (root-mean-square error (RMSE): 1.78 ± 0.41 Nm/rad, R2: 0.9763 ± 0.0089) and superior stability (lower error variance) compared to the benchmarks. Furthermore, the method successfully decouples the contributions of passive geometry and active neural drive to stiffness modulation, offering a robust, analytically efficient tool for rehabilitation robotics.
- 1 April 2026
- Published by Springer Nature
- p. 201-213
An Energy Harvesting Backpack Based on an Ejection Velocity-Increasing Mechanism: Dynamic Analysis and Experiment
- 1 April 2026
- Published by Springer Nature
- p. 201-213
An Energy Harvesting Backpack Based on an Ejection Velocity-Increasing Mechanism: Dynamic Analysis and Experiment
- 15 July 2025
- Published by Elsevier in Acta Astronautica
- Vol. 236, 432-450
A high-efficient computing catenary element for large cable net analysis in Lunar Crater Radio Telescopes
- 15 July 2025
- Published by Elsevier in Acta Astronautica
- Vol. 236, 432-450
A high-efficient computing catenary element for large cable net analysis in Lunar Crater Radio Telescopes
- 30 December 2024
- Published by Elsevier in Mechanism and Machine Theory
- Vol. 205
An empirical analytical method to determine the human walking ground reaction force at known speeds
- 30 December 2024
- Published by Elsevier in Mechanism and Machine Theory
- Vol. 205
An empirical analytical method to determine the human walking ground reaction force at known speeds
- 29 November 2024
- Published by Elsevier in Applied Energy
- Vol. 379, 124993
Lightweight energy harvesting backpack achieved with a slingshot-inspired flexible accelerator
- 29 November 2024
- Published by Elsevier in Applied Energy
- Vol. 379, 124993
Lightweight energy harvesting backpack achieved with a slingshot-inspired flexible accelerator
- 20 July 2023
- Published by Elsevier in Mechanical Systems and Signal Processing
- Vol. 200
Biomechanical modeling and experiments of energy harvesting backpacks
- 20 July 2023
- Published by Elsevier in Mechanical Systems and Signal Processing
- Vol. 200
Biomechanical modeling and experiments of energy harvesting backpacks