Xiaolong Pan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xiaolong Pan has a total of 134 co-authors. Here are the top co-authors by number of shared publications:
Xiangjun Xin
National Key Laboratory of Science and Technology on Space-Born Intelligent Information Processing
17 shared publicationsRan Gao
Advanced Research Institute of Multidisciplinary Science, Beijing Institute of Technology, Beijing, China
13 shared publications- Dong Guo
School of Information and Electronics, Beijing Institute of Technology, Beijing 100081, China
12 shared publications Qi Zhang
Beijing University of Posts and Telecommunications (BUPT)
12 shared publications- Qinghua Tian
Beijing University of Posts and Telecommunications (BUPT)
11 shared publications - Xiangjun Xin
Beijing Institute of Technology
11 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (21) , 9413-9420
Region-Partitioning BCJR Scheme Cooperating With LDPC in PAM4 IM/DD Optical Interconnection
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (21) , 9413-9420
Region-Partitioning BCJR Scheme Cooperating With LDPC in PAM4 IM/DD Optical Interconnection
- Open Access
A Givens Rotation-Based QRD-RLS-CMA Blind Equalizer for 4 × 4 Real-Valued MIMO Coherent Optical Receivers
Multiple-input multiple-output (MIMO) equalization is essential for robust coherent optical transmission. However, conventional complex-valued equalizers provide limited compensation for in-phase and quadrature (IQ) imbalance, degrading signal recovery. Conventional recursive least-squares constant-modulus algorithms (RLS-CMAs) may suffer numerical divergence when long adaptive filters are used. We propose a Givens rotation-based QR decomposition RLS-CMA (QRD-RLS-CMA) for a real-valued MIMO equalizer. We compensate for IQ imbalance through real-valued processing and introduce QR decomposition to improve numerical stability without explicitly updating the inverse sample covariance matrix. The algorithm is experimentally evaluated in a 25-GBaud polarization division-multiplexed 16-quadrature amplitude modulation (QAM) coherent optical link over 20 km of standard single-mode fiber. In simulation experiments, separate 3-dB gain-imbalance and 15° phase-imbalance tests yield an error vector magnitude (EVM) of approximately 13.8% for the equalizer, compared with approximately 25.3% and 22.1%, respectively, for the complex-valued baseline. The conventional RLS-CMA exhibits numerical degradation with an increasing tap count and diverges beyond 25 taps, whereas the QRD-RLS-CMA maintains stable convergence through 31 taps. In finite-precision evaluations across fractional word lengths of 8–18 bits, the QRD-RLS-CMA consistently outperforms the conventional RLS-CMA in bit error rate (BER) performance, providing a 2-bit margin in fractional word length at the hard-decision forward error correction (HD-FEC) threshold. The numerical robustness provided by QRD supports the use of longer adaptive filters and offers a basis for reduced-precision hardware implementations in coherent optical receivers.Open AccessA Givens Rotation-Based QRD-RLS-CMA Blind Equalizer for 4 × 4 Real-Valued MIMO Coherent Optical Receivers
Multiple-input multiple-output (MIMO) equalization is essential for robust coherent optical transmission. However, conventional complex-valued equalizers provide limited compensation for in-phase and quadrature (IQ) imbalance, degrading signal recovery. Conventional recursive least-squares constant-modulus algorithms (RLS-CMAs) may suffer numerical divergence when long adaptive filters are used. We propose a Givens rotation-based QR decomposition RLS-CMA (QRD-RLS-CMA) for a real-valued MIMO equalizer. We compensate for IQ imbalance through real-valued processing and introduce QR decomposition to improve numerical stability without explicitly updating the inverse sample covariance matrix. The algorithm is experimentally evaluated in a 25-GBaud polarization division-multiplexed 16-quadrature amplitude modulation (QAM) coherent optical link over 20 km of standard single-mode fiber. In simulation experiments, separate 3-dB gain-imbalance and 15° phase-imbalance tests yield an error vector magnitude (EVM) of approximately 13.8% for the equalizer, compared with approximately 25.3% and 22.1%, respectively, for the complex-valued baseline. The conventional RLS-CMA exhibits numerical degradation with an increasing tap count and diverges beyond 25 taps, whereas the QRD-RLS-CMA maintains stable convergence through 31 taps. In finite-precision evaluations across fractional word lengths of 8–18 bits, the QRD-RLS-CMA consistently outperforms the conventional RLS-CMA in bit error rate (BER) performance, providing a 2-bit margin in fractional word length at the hard-decision forward error correction (HD-FEC) threshold. The numerical robustness provided by QRD supports the use of longer adaptive filters and offers a basis for reduced-precision hardware implementations in coherent optical receivers. - 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (17) , 7421-7427
Ultra-High Bandwidth Efficient Implementation Employing Geometric Shaped Symbol Division Multiplexing in Optical DMT Interconnection
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (17) , 7421-7427
Ultra-High Bandwidth Efficient Implementation Employing Geometric Shaped Symbol Division Multiplexing in Optical DMT Interconnection
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (17) , 1-17
Signature-Guided Hybrid Sequence Estimation with Sparsely-Activated MLSE in Severely Bandwidth-Limited Coherent Links
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (17) , 1-17
Signature-Guided Hybrid Sequence Estimation with Sparsely-Activated MLSE in Severely Bandwidth-Limited Coherent Links
- 31 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (5) , 1657-1668
A Lightweight Multi-Task Neural Network Based on Knowledge Distillation for Joint Modulation Format Identification and Optical Signal-to-Noise Ratio Estimation
To improve the modulation format identification (MFI) accuracy and reduce the optical signal-to-noise ratio (OSNR) estimation error under complex channel interference, a lightweight multi-task neural network (LMTNN) based on knowledge distillation (KD) is proposed, aiming to achieve high identification performance and low estimation error. This method utilizes wavelet transform and performs fast Fourier transform (FFT) on signals of different orders to extract multi-dimensional features, integrating a LMTNN based on KD, enabling accurate MFI and OSNR estimation. First, the receiver side signal after carrier frequency recovery (CFR) is normalized by the maximum amplitude. Then, wavelet coefficients are extracted using wavelet transform, and spectral statistics are computed by applying FFT to signals of different orders, thereby constructing a multi-dimensional joint feature representation. Finally, based on the extracted features, a teacher model based on a deep neural network (DNN) architecture is trained. The knowledge of the teacher model is transferred to the structurally simplified student model by leveraging KD technology, thus constructing a computationally efficient LMTNN. Simulation results show that when OSNR $\geq$ 13dB, the identification accuracy of the proposed method can reach 100% for all six modulation formats of polarization division multiplexing (PDM) QPSK/-8PSK/-8QAM/-16QAM/-32QAM/-64QAM. Meanwhile, the mean absolute error (MAE) of OSNR estimation remains within 0.15dB. Experimental results demonstrate that 100% identification accuracy is achieved at minimum OSNR thresholds of 3dB, 8dB, 10dB, 11dB, and 7dB for PDM 4QAM/-8QAM/-16QAM/-32QAM/-64QAM, with OSNR estimation errors remaining within 0.12dB. Compared with a deep neural network based on high-order FFT features and a convolutional neural network based on constellation diagrams, the proposed method achieves an overall identification accuracy of 98.7%, exceeding the performance of the comparative methods, which reaches 95.1% and 96.3% accuracy, respectively. For the OSNR estimation task, the proposed method maintains a root mean square error (RMSE) below 0.16dB, which is substantially lower than the RMSE achieved by the comparative methods, measured at 0.28dB and 0.24dB, respectively.
- 31 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (5) , 1657-1668
A Lightweight Multi-Task Neural Network Based on Knowledge Distillation for Joint Modulation Format Identification and Optical Signal-to-Noise Ratio Estimation
To improve the modulation format identification (MFI) accuracy and reduce the optical signal-to-noise ratio (OSNR) estimation error under complex channel interference, a lightweight multi-task neural network (LMTNN) based on knowledge distillation (KD) is proposed, aiming to achieve high identification performance and low estimation error. This method utilizes wavelet transform and performs fast Fourier transform (FFT) on signals of different orders to extract multi-dimensional features, integrating a LMTNN based on KD, enabling accurate MFI and OSNR estimation. First, the receiver side signal after carrier frequency recovery (CFR) is normalized by the maximum amplitude. Then, wavelet coefficients are extracted using wavelet transform, and spectral statistics are computed by applying FFT to signals of different orders, thereby constructing a multi-dimensional joint feature representation. Finally, based on the extracted features, a teacher model based on a deep neural network (DNN) architecture is trained. The knowledge of the teacher model is transferred to the structurally simplified student model by leveraging KD technology, thus constructing a computationally efficient LMTNN. Simulation results show that when OSNR $\geq$ 13dB, the identification accuracy of the proposed method can reach 100% for all six modulation formats of polarization division multiplexing (PDM) QPSK/-8PSK/-8QAM/-16QAM/-32QAM/-64QAM. Meanwhile, the mean absolute error (MAE) of OSNR estimation remains within 0.15dB. Experimental results demonstrate that 100% identification accuracy is achieved at minimum OSNR thresholds of 3dB, 8dB, 10dB, 11dB, and 7dB for PDM 4QAM/-8QAM/-16QAM/-32QAM/-64QAM, with OSNR estimation errors remaining within 0.12dB. Compared with a deep neural network based on high-order FFT features and a convolutional neural network based on constellation diagrams, the proposed method achieves an overall identification accuracy of 98.7%, exceeding the performance of the comparative methods, which reaches 95.1% and 96.3% accuracy, respectively. For the OSNR estimation task, the proposed method maintains a root mean square error (RMSE) below 0.16dB, which is substantially lower than the RMSE achieved by the comparative methods, measured at 0.28dB and 0.24dB, respectively.
- 22 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (5) , 1608-1620
Low-Complexity and Robust Modulation Format Recognition Method Based on Multi-Stage Feature Extraction
A low-complexity, robust modulation format recognition (MFR) method based on multi-stage feature extraction is proposed for adaptive processing of varying modulation formats in future optical networks. First, signal distribution features are obtained using histogram statistics. These features are then reduced in dimensionality by extracting harmonic components through Fourier series decomposition. Finally, a lightweight neural network recognizes modulation format labels from the distribution features, ensuring efficient and accurate MFR. Simulations and experiments validate the performance of the proposed method. Simulation results show a 100% recognition rate for 4QAM, 8QAM, 16QAM, 32QAM, 64QAM, 128QAM, and 256QAM at Signal-to-Noise Ratios (SNRs) of 0 dB, 4.5 dB, 8 dB, 10.5 dB, 13 dB, 16 dB, 20 dB, achieving MFR at a bit error rate threshold of 0.04 with some SNR margin in an additive white Gaussian noise channel. Compared to the amplitude distribution method and other 9 MFR methods, the proposed method has the widest SNR identification range, covering all seven QAM formats from 4QAM to 256QAM. Additionally, it demonstrates the lowest computational complexity of O(N) among all methods. Experimental validation in WDM long-distance transmission systems under varying optical SNRs and channel counts further confirms the method's effectiveness and robustness.
- 22 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (5) , 1608-1620
Low-Complexity and Robust Modulation Format Recognition Method Based on Multi-Stage Feature Extraction
A low-complexity, robust modulation format recognition (MFR) method based on multi-stage feature extraction is proposed for adaptive processing of varying modulation formats in future optical networks. First, signal distribution features are obtained using histogram statistics. These features are then reduced in dimensionality by extracting harmonic components through Fourier series decomposition. Finally, a lightweight neural network recognizes modulation format labels from the distribution features, ensuring efficient and accurate MFR. Simulations and experiments validate the performance of the proposed method. Simulation results show a 100% recognition rate for 4QAM, 8QAM, 16QAM, 32QAM, 64QAM, 128QAM, and 256QAM at Signal-to-Noise Ratios (SNRs) of 0 dB, 4.5 dB, 8 dB, 10.5 dB, 13 dB, 16 dB, 20 dB, achieving MFR at a bit error rate threshold of 0.04 with some SNR margin in an additive white Gaussian noise channel. Compared to the amplitude distribution method and other 9 MFR methods, the proposed method has the widest SNR identification range, covering all seven QAM formats from 4QAM to 256QAM. Additionally, it demonstrates the lowest computational complexity of O(N) among all methods. Experimental validation in WDM long-distance transmission systems under varying optical SNRs and channel counts further confirms the method's effectiveness and robustness.
- 5 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (2) , 507-520
Spectrally Efficient and Robust AGFB-OFDM Design for Q-Band Photonic-Assisted mmWave Communication
Orthogonal frequency division multiplexing (OFDM), a key modulation for 6 G, faces scalability challenges in ultra-wideband transmission due to constraints on subcarrier spacing and the maximum size of the inverse fast Fourier transform (IFFT) in 3GPP specifications. To overcome this, we propose an adaptive generalized filter bank OFDM (AGFB-OFDM) scheme that supports ultra-wideband communication while achieving high spectral efficiency, low complexity, and flexible system configuration. Compared with conventional GFB-OFDM, which alleviates CP-OFDM's out-of-band leakage and bandwidth limitations via IFFT decomposition and subband filtering, AGFB-OFDM further addresses the spectral efficiency loss caused by frequency-domain double sampling. By incorporating a joint adaptive filter modeling mechanism, it ensures accurate alignment between filter response and signal characteristics, significantly improving spectral efficiency. The proposed scheme is experimentally validated in a photonics-assisted millimeter-wave (MMW) communication system comprising a 10 km optical fiber and a 1 m wireless link. The results demonstrate that AGFB-OFDM outperforms conventional CP-OFDM and GFB-OFDM in terms of bit error rate (BER) and spectral efficiency. Furthermore, we propose and evaluate a dynamic subband bandwidth allocation strategy that effectively mitigates frequency-selective fading. This approach significantly enhances system robustness and stability under complex hybrid channel conditions while operating within fixed hardware constraints. To the best of our knowledge, this is the first experimental realization of such an adaptive filter bank modulation in a radio over fiber (RoF) system. This work demonstrates the potential of AGFB-OFDM in enabling robust and spectrally efficient optical-wireless integrated communications.
- 5 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (2) , 507-520
Spectrally Efficient and Robust AGFB-OFDM Design for Q-Band Photonic-Assisted mmWave Communication
Orthogonal frequency division multiplexing (OFDM), a key modulation for 6 G, faces scalability challenges in ultra-wideband transmission due to constraints on subcarrier spacing and the maximum size of the inverse fast Fourier transform (IFFT) in 3GPP specifications. To overcome this, we propose an adaptive generalized filter bank OFDM (AGFB-OFDM) scheme that supports ultra-wideband communication while achieving high spectral efficiency, low complexity, and flexible system configuration. Compared with conventional GFB-OFDM, which alleviates CP-OFDM's out-of-band leakage and bandwidth limitations via IFFT decomposition and subband filtering, AGFB-OFDM further addresses the spectral efficiency loss caused by frequency-domain double sampling. By incorporating a joint adaptive filter modeling mechanism, it ensures accurate alignment between filter response and signal characteristics, significantly improving spectral efficiency. The proposed scheme is experimentally validated in a photonics-assisted millimeter-wave (MMW) communication system comprising a 10 km optical fiber and a 1 m wireless link. The results demonstrate that AGFB-OFDM outperforms conventional CP-OFDM and GFB-OFDM in terms of bit error rate (BER) and spectral efficiency. Furthermore, we propose and evaluate a dynamic subband bandwidth allocation strategy that effectively mitigates frequency-selective fading. This approach significantly enhances system robustness and stability under complex hybrid channel conditions while operating within fixed hardware constraints. To the best of our knowledge, this is the first experimental realization of such an adaptive filter bank modulation in a radio over fiber (RoF) system. This work demonstrates the potential of AGFB-OFDM in enabling robust and spectrally efficient optical-wireless integrated communications.
- 2 July 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (14) , 29456-29470
Memory-efficient MLSE with pre-decision-driven pruning and metric sharing for bandwidth-constrained baud-rate sampling coherent optical interconnects
The surging demand for intra-data center traffic necessitates optical interconnects that deliver high capacity, minimal latency, and exceptional power efficiency. Faster-than-Nyquist (FTN) signaling based on baud-rate sampling (BRS) offers a workable solution to power-efficient data center interconnects, yet its reliance on computationally intensive maximum likelihood sequence estimation (MLSE) poses significant challenges. To overcome these limitations, we propose the memory-efficient MLSE with pre-decision-driven pruning and metric sharing (MEPS-MLSE), a hardware-efficient algorithm that enhances computational efficiency through a synergistic three-dimensional optimization framework. By integrating state memory optimization, pre-decision region partitioning-based state pruning, and branch metric (BM) space sharing, MEPS-MLSE achieves a 94.06% reduction in computational complexity compared to conventional full-size MLSE, with negligible performance degradation. Experimental validation in a 40 GHz bandwidth-constrained FTN-16QAM system, operating at 80/90/100 Gbaud over 10–40 km transmission, underscores its robustness and efficacy. These results position the proposed MEPS-MLSE as an effective solution for power-efficient data centers, poised to meet the escalating scalability and energy demands of next-generation optical interconnects.
- 2 July 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (14) , 29456-29470
Memory-efficient MLSE with pre-decision-driven pruning and metric sharing for bandwidth-constrained baud-rate sampling coherent optical interconnects
The surging demand for intra-data center traffic necessitates optical interconnects that deliver high capacity, minimal latency, and exceptional power efficiency. Faster-than-Nyquist (FTN) signaling based on baud-rate sampling (BRS) offers a workable solution to power-efficient data center interconnects, yet its reliance on computationally intensive maximum likelihood sequence estimation (MLSE) poses significant challenges. To overcome these limitations, we propose the memory-efficient MLSE with pre-decision-driven pruning and metric sharing (MEPS-MLSE), a hardware-efficient algorithm that enhances computational efficiency through a synergistic three-dimensional optimization framework. By integrating state memory optimization, pre-decision region partitioning-based state pruning, and branch metric (BM) space sharing, MEPS-MLSE achieves a 94.06% reduction in computational complexity compared to conventional full-size MLSE, with negligible performance degradation. Experimental validation in a 40 GHz bandwidth-constrained FTN-16QAM system, operating at 80/90/100 Gbaud over 10–40 km transmission, underscores its robustness and efficacy. These results position the proposed MEPS-MLSE as an effective solution for power-efficient data centers, poised to meet the escalating scalability and energy demands of next-generation optical interconnects.
- 30 June 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (14) , 29026-29043
Fully utilized pilot-aided digital signal processing with state pruning MLSD assisted adaptive symbol detection for symbol-rate sampling coherent optical interconnects
In high-speed coherent optical interconnects, symbol-rate sampling serves as a critical strategy for reducing digital signal processing (DSP) power consumption, yet its implementation faces significant challenges due to the sensitivity to analog-to-digital converter (ADC) sampling phase error and signal degradation under Nyquist constraints. This paper presents a hardware-efficient DSP architecture for FTN-shaped 16QAM systems that fully exploits pilot-aided processing to enable power-efficient, symbol-rate sampled coherent optical interconnects. The proposed design features a polarization-joint misaligned pilot scheme for enhanced carrier recovery (CR) and a pilot-aided adaptive symbol detection framework (PA-SDF) with state pruning MLSD. The PA-SDF dynamically switches between single-symbol (SSD) and multi-symbol detection (MSD) via a predefined mode-switching decision metric (MSDM), achieving an optimal BER-complexity trade-off. Experimental results at 80/90/100 Gbaud demonstrate a 0.7 dB receiver sensitivity improvement, while the proposed carrier recovery scheme reduces multiplier and adder usage by over 95%. Furthermore, the decoding architecture achieves a remarkable reduction in MLSD complexity to just 7.72% of conventional approaches, with 74% of symbols being processed through low-complexity SSD. The proposed fully utilized pilot-aided symbol-rate sampling DSP architecture presents a viable solution for next-generation, power-constrained data centers.
- 30 June 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (14) , 29026-29043
Fully utilized pilot-aided digital signal processing with state pruning MLSD assisted adaptive symbol detection for symbol-rate sampling coherent optical interconnects
In high-speed coherent optical interconnects, symbol-rate sampling serves as a critical strategy for reducing digital signal processing (DSP) power consumption, yet its implementation faces significant challenges due to the sensitivity to analog-to-digital converter (ADC) sampling phase error and signal degradation under Nyquist constraints. This paper presents a hardware-efficient DSP architecture for FTN-shaped 16QAM systems that fully exploits pilot-aided processing to enable power-efficient, symbol-rate sampled coherent optical interconnects. The proposed design features a polarization-joint misaligned pilot scheme for enhanced carrier recovery (CR) and a pilot-aided adaptive symbol detection framework (PA-SDF) with state pruning MLSD. The PA-SDF dynamically switches between single-symbol (SSD) and multi-symbol detection (MSD) via a predefined mode-switching decision metric (MSDM), achieving an optimal BER-complexity trade-off. Experimental results at 80/90/100 Gbaud demonstrate a 0.7 dB receiver sensitivity improvement, while the proposed carrier recovery scheme reduces multiplier and adder usage by over 95%. Furthermore, the decoding architecture achieves a remarkable reduction in MLSD complexity to just 7.72% of conventional approaches, with 74% of symbols being processed through low-complexity SSD. The proposed fully utilized pilot-aided symbol-rate sampling DSP architecture presents a viable solution for next-generation, power-constrained data centers.
- 16 June 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (13) , 26899-26914
C + L band seamless PM-256QAM DWDM transmission over 20.6 km low-loss hollow-core fiber enabled by low-complexity misaligned pilot-aided carrier recovery
Overcoming the capacity bottleneck of single-mode fiber (SMF), we exploit the exceptionally low-loss and low-nonlinearity characteristics of hollow-core fiber (HCF) to demonstrate a 198-channel × 40 Gbaud polarization multiplexed 256QAM (PM-256QAM) WDM system over a 20.6 km nested anti-resonant nodeless fiber (NANF) transmission link. A hardware-efficient, low-complexity carrier recovery algorithm is employed, relying entirely on polarized misaligned pilot symbols for robust frame synchronization and high-precision carrier recovery, eliminating the need for training sequences. Compared to conventional methods constrained by fourth-power operations and pilot symbol intervals, our approach offers a wider frequency offset estimation (FOE) range and enhanced carrier phase recovery (CPR). Experimental results demonstrate that the bit error rate (BER) of all 198 WDM channels remains below the 20% soft-decision forward error correction (SD-FEC) threshold, achieving spectral efficiencies of 12.8 bit/s/Hz in the C-band and 13.1 bit/s/Hz in the L-band. Benefiting from the unique properties of HCF, the system demonstrates superior performance compared to conventional single-mode fiber, particularly at high launch powers. This work paves the way for future ultra-high-capacity, low-latency optical networks, providing a viable technological path for next-generation communication systems.
- 16 June 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (13) , 26899-26914
C + L band seamless PM-256QAM DWDM transmission over 20.6 km low-loss hollow-core fiber enabled by low-complexity misaligned pilot-aided carrier recovery
Overcoming the capacity bottleneck of single-mode fiber (SMF), we exploit the exceptionally low-loss and low-nonlinearity characteristics of hollow-core fiber (HCF) to demonstrate a 198-channel × 40 Gbaud polarization multiplexed 256QAM (PM-256QAM) WDM system over a 20.6 km nested anti-resonant nodeless fiber (NANF) transmission link. A hardware-efficient, low-complexity carrier recovery algorithm is employed, relying entirely on polarized misaligned pilot symbols for robust frame synchronization and high-precision carrier recovery, eliminating the need for training sequences. Compared to conventional methods constrained by fourth-power operations and pilot symbol intervals, our approach offers a wider frequency offset estimation (FOE) range and enhanced carrier phase recovery (CPR). Experimental results demonstrate that the bit error rate (BER) of all 198 WDM channels remains below the 20% soft-decision forward error correction (SD-FEC) threshold, achieving spectral efficiencies of 12.8 bit/s/Hz in the C-band and 13.1 bit/s/Hz in the L-band. Benefiting from the unique properties of HCF, the system demonstrates superior performance compared to conventional single-mode fiber, particularly at high launch powers. This work paves the way for future ultra-high-capacity, low-latency optical networks, providing a viable technological path for next-generation communication systems.