Jenna Vito
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jenna Vito has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Manish Shetty
Texas A&M University
6 shared publications - Fatima Mahnaz
Texas A&M University
5 shared publications Jasan Mangalindan
Texas A&M University
2 shared publications- Jasan Robey Mangalindan
Texas A&M University
2 shared publications Aojie Li
Lehigh University
1 shared publication- Ashfaq Iftakher
Artie McFerrin Department of Chemical Engineering Texas A&M University 77843-3122 College Station TX USA
1 shared publication
Latest Publications
- Open Access
- 27 January 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Tandem Cu/ZnO/ZrO2-SAPO-34 System for Dimethyl Ether (DME) Synthesis from CO2 and H2: Catalyst Optimization, Techno-Economic and Carbon-Footprint Analyses
To alleviate detrimental effects associated with anthropogenic emissions, the use of CO2 and H2 as feedstocks for their conversion to associated with dimethyl ether (DME) with tandem catalysts is an attractive and sustainable route. First, we investigated, for the first time, the catalytic activity of bifunctional admixtures of Cu-ZnO-ZrO2 (CZZ) and a silicoaluminophosphate, SAPO-34, for CO2 hydrogenation to DME, and optimized their reactivity with an emphasis on identifying optimum synthesis conditions for CZZ including Cu:Zn:Zr molar ratio, and ageing and calcination temperatures. The highest methanol (MeOH) productivity (10.8 mol kgcat-1 h-1) was observed for CZZ-611 aged at 40°C and calcined at 500°C. When coupled with SAPO-34, CZZ/SAPO-34 reached 20% CO2 conversion and 56% DME selectivity at optimized conditions (260°C, 500 psig, and 2000 mL gCZZ-1 h-1) and was stable for 50 h time-on-stream. Next, we performed kinetic modeling to translate lab-scale findings to industrial packed-bed reactors followed by a techno-economic analysis (TEA) with cradle-to-gate environmental footprint evaluation to evaluate its industrial applicability. TEA of a 20,000 tpy DME plant revealed raw material costs as the main operating costs drivers (H2 cost comprises 47% of total cost). Considering green H2 ($4/kg H2) and captured CO2 as feed, the minimum DME selling price (MDSP) was $3.21/kg, ~3.6x higher than market price ($0.88/kg). MDSP drops to $1.99/kg with grey H2 ($1/kg H2) and fluctuates ±$0.14 with changes in CAPEX (±30%) and other economic factors. The plant’s carbon footprint was mainly affected by H2 source. Green and grey H2 resulted in emissions of 0.21 and 4.4 kg CO2 eq/kg DME, respectively. Importantly, negative carbon-footprint can be achieved by using green H2 and CO2 captured directly from air. Overall, our work showed tandem catalysis as a promising approach towards sustainable DME production and identifies the pathway towards making it cost-competitive with fossil-fuels.
- 27 January 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessTandem Cu/ZnO/ZrO2-SAPO-34 System for Dimethyl Ether (DME) Synthesis from CO2 and H2: Catalyst Optimization, Techno-Economic and Carbon-Footprint Analyses
To alleviate detrimental effects associated with anthropogenic emissions, the use of CO2 and H2 as feedstocks for their conversion to associated with dimethyl ether (DME) with tandem catalysts is an attractive and sustainable route. First, we investigated, for the first time, the catalytic activity of bifunctional admixtures of Cu-ZnO-ZrO2 (CZZ) and a silicoaluminophosphate, SAPO-34, for CO2 hydrogenation to DME, and optimized their reactivity with an emphasis on identifying optimum synthesis conditions for CZZ including Cu:Zn:Zr molar ratio, and ageing and calcination temperatures. The highest methanol (MeOH) productivity (10.8 mol kgcat-1 h-1) was observed for CZZ-611 aged at 40°C and calcined at 500°C. When coupled with SAPO-34, CZZ/SAPO-34 reached 20% CO2 conversion and 56% DME selectivity at optimized conditions (260°C, 500 psig, and 2000 mL gCZZ-1 h-1) and was stable for 50 h time-on-stream. Next, we performed kinetic modeling to translate lab-scale findings to industrial packed-bed reactors followed by a techno-economic analysis (TEA) with cradle-to-gate environmental footprint evaluation to evaluate its industrial applicability. TEA of a 20,000 tpy DME plant revealed raw material costs as the main operating costs drivers (H2 cost comprises 47% of total cost). Considering green H2 ($4/kg H2) and captured CO2 as feed, the minimum DME selling price (MDSP) was $3.21/kg, ~3.6x higher than market price ($0.88/kg). MDSP drops to $1.99/kg with grey H2 ($1/kg H2) and fluctuates ±$0.14 with changes in CAPEX (±30%) and other economic factors. The plant’s carbon footprint was mainly affected by H2 source. Green and grey H2 resulted in emissions of 0.21 and 4.4 kg CO2 eq/kg DME, respectively. Importantly, negative carbon-footprint can be achieved by using green H2 and CO2 captured directly from air. Overall, our work showed tandem catalysis as a promising approach towards sustainable DME production and identifies the pathway towards making it cost-competitive with fossil-fuels.
- Open Access
- 27 August 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Tandem methanolysis and catalytic transfer hydrogenolysis of polyethylene terephthalate to p-xylene over Cu/ZnZrOx catalysts
We demonstrate a novel approach of utilizing methanol (CH3OH) for both the methanolysis of polyethylene terephthalate (PET) to form dimethyl terephthalate (DMT) at near-quantitative yields (~97%) and catalytic transfer hydrogenolysis (CTH) of DMT to p-xylene (PX, ~63% at 240 °C and 16 h) on a reducible ZnZrOx supported Cu catalyst (i.e., Cu/ZnZrOx). Pre- and post-reaction surface and bulk characterization, along with density functional theory (DFT) computations, explicate the role of the metal-support interface of Cu/ZnZrOx in providing active sites for the activation of both CH3OH and DMT and facilitating a lower free-energy pathway for both CH3OH dehydrogenation and DMT hydrogenolysis, compared to Cu supported on redox-neutral SiO2 support. DFT calculations further reveal that the rate-determining step for CTH of DMT is the cleavage of the C-O linkages in –(C=O)-OR) of DMT. Loading studies and thermodynamic calculations showed that, under reaction conditions, CH3OH in the gas phase, rather than in the liquid phase, is critical for CTH of DMT. Interestingly, the Cu/ZnZrOx catalyst was also effective for the methanolysis and hydrogenolysis of C-C bonds (compared to C-O bonds for PET) of waste polycarbonate (PC), largely forming xylenol (~38%) and methyl isopropyl anisole (~42%) demonstrating the versatility of this approach toward valorizing a wide range of condensation polymers.
- 27 August 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessTandem methanolysis and catalytic transfer hydrogenolysis of polyethylene terephthalate to p-xylene over Cu/ZnZrOx catalysts
We demonstrate a novel approach of utilizing methanol (CH3OH) for both the methanolysis of polyethylene terephthalate (PET) to form dimethyl terephthalate (DMT) at near-quantitative yields (~97%) and catalytic transfer hydrogenolysis (CTH) of DMT to p-xylene (PX, ~63% at 240 °C and 16 h) on a reducible ZnZrOx supported Cu catalyst (i.e., Cu/ZnZrOx). Pre- and post-reaction surface and bulk characterization, along with density functional theory (DFT) computations, explicate the role of the metal-support interface of Cu/ZnZrOx in providing active sites for the activation of both CH3OH and DMT and facilitating a lower free-energy pathway for both CH3OH dehydrogenation and DMT hydrogenolysis, compared to Cu supported on redox-neutral SiO2 support. DFT calculations further reveal that the rate-determining step for CTH of DMT is the cleavage of the C-O linkages in –(C=O)-OR) of DMT. Loading studies and thermodynamic calculations showed that, under reaction conditions, CH3OH in the gas phase, rather than in the liquid phase, is critical for CTH of DMT. Interestingly, the Cu/ZnZrOx catalyst was also effective for the methanolysis and hydrogenolysis of C-C bonds (compared to C-O bonds for PET) of waste polycarbonate (PC), largely forming xylenol (~38%) and methyl isopropyl anisole (~42%) demonstrating the versatility of this approach toward valorizing a wide range of condensation polymers.
- Open Access
- 11 June 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Ion- Exchange of Zeolitic Brønsted Acid Sites with Metal Cations Influences the Hydrocarbon Pools (HCP) during Tandem CO2 Hydrogenation
We demonstrate that the exchange of zeolitic Brønsted acid sites (BAS) with cations from metal-oxides plays a pivotal role in the propagation of hydrocarbon pools (HCP) during CO2 hydrogenation. We estimated the likelihood of cationic species migration from different oxides-In2O3, ZnZrOx, Cr2O3 and their exchange with BAS by computing metal vacancy formation energies. Accordingly, we integrated metal-oxides and SAPO-34 at nanoscale proximity (~1400 nm), to probe the propensity of the cations to exchange with BAS. To assess the influence of ion-exchange on HCP, we measured propylene-to-ethylene (indicates relative propagation of olefin-to-aromatic cycles) and paraffin-to-olefins ratios, which revealed that Inδ+ species inhibited HCP propagation, Znδ+ species enhanced hydrogen transfer, and Crδ+ species did not influence HCP. Combining reactivity data with ammonia temperature programmed desorption, occluded hydrocarbon analysis, 13C solid-state nuclear magnetic resonance (ssNMR) and X-ray photoelectron spectroscopy analysis (XPS), we provide insights into the influence of ion-exchanged species on HCP for rational integration of bifunctional catalysts.
- 11 June 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessIon- Exchange of Zeolitic Brønsted Acid Sites with Metal Cations Influences the Hydrocarbon Pools (HCP) during Tandem CO2 Hydrogenation
We demonstrate that the exchange of zeolitic Brønsted acid sites (BAS) with cations from metal-oxides plays a pivotal role in the propagation of hydrocarbon pools (HCP) during CO2 hydrogenation. We estimated the likelihood of cationic species migration from different oxides-In2O3, ZnZrOx, Cr2O3 and their exchange with BAS by computing metal vacancy formation energies. Accordingly, we integrated metal-oxides and SAPO-34 at nanoscale proximity (~1400 nm), to probe the propensity of the cations to exchange with BAS. To assess the influence of ion-exchange on HCP, we measured propylene-to-ethylene (indicates relative propagation of olefin-to-aromatic cycles) and paraffin-to-olefins ratios, which revealed that Inδ+ species inhibited HCP propagation, Znδ+ species enhanced hydrogen transfer, and Crδ+ species did not influence HCP. Combining reactivity data with ammonia temperature programmed desorption, occluded hydrocarbon analysis, 13C solid-state nuclear magnetic resonance (ssNMR) and X-ray photoelectron spectroscopy analysis (XPS), we provide insights into the influence of ion-exchanged species on HCP for rational integration of bifunctional catalysts.
- Open Access
- 17 January 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Influence of Acid Strength on Olefin Selectivity of Chabazite (CHA) Framework Zeolite/Zeotypes during Tandem CO2 Hydrogenation
The role of the Brønsted acid sites (BAS) strength of chabazite (CHA) framework on olefin selectivity during methanol-to-olefin (MTO) and tandem CO2 hydrogenation was investigated over an aluminosilicate, SSZ-13 and a silicoaluminophospate, SAPO-34 and their bifunctional admixtures with In2O3. During MTO, SSZ-13 and SAPO-34 yielded primarily olefins (cumulative selectivity of ~60% and ~90%, respectively at cumulative turn-over number, TON over 500). Interestingly, an interpellet admixture of In2O3/SSZ-13 (distance between redox sites and BAS of 260-900 µm)) predominantly yielded paraffins (cumulative selectivity of ~93% at cumulative TON over 40) via the secondary hydrogenation of olefins as seen from the cumulative paraffin-to-olefin (P/O) ratio of ~21 during CO2 hydrogenation. In comparison, an interpellet In2O3/SAPO-34 admixture yielded majority olefins (cumulative selectivity of ~67% at cumulative TON over 60) due to a lesser degree of secondary hydrogenation (cumulative P/O ratio of ~0.2) on the BAS in SAPO-34, which has a lower acid strength as compared to SSZ-13. Interestingly, both interpellet admixtures of In2O3/SSZ-13 and In2O3/SAPO-34 remained stable during tandem CO2 hydrogenation by favoring the olefin cycle and suppressing the formation of deactivation-inducing-aromatics, unlike MTO, where both admixtures showed fast deactivation. Ion-exchange of BAS (H+) with Inδ+ (from In2O3) in intrapellet admixtures (distance between redox sites and BAS of 270-1500 nm) of In2O3/SSZ-13, and In2O3/SAPO-34, inhibited C-C coupling and predominantly formed CH4. Overall, our study related to the product selectivity and deactivation in MTO and tandem CO2 hydrogenation over CHA framework zeolite/zeotype to the aromatic and olefin pool in the hydrocarbon pool mechanism. These underpinnings will help with rational catalyst design for tandem CO2 hydrogenation.
- 17 January 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessInfluence of Acid Strength on Olefin Selectivity of Chabazite (CHA) Framework Zeolite/Zeotypes during Tandem CO2 Hydrogenation
The role of the Brønsted acid sites (BAS) strength of chabazite (CHA) framework on olefin selectivity during methanol-to-olefin (MTO) and tandem CO2 hydrogenation was investigated over an aluminosilicate, SSZ-13 and a silicoaluminophospate, SAPO-34 and their bifunctional admixtures with In2O3. During MTO, SSZ-13 and SAPO-34 yielded primarily olefins (cumulative selectivity of ~60% and ~90%, respectively at cumulative turn-over number, TON over 500). Interestingly, an interpellet admixture of In2O3/SSZ-13 (distance between redox sites and BAS of 260-900 µm)) predominantly yielded paraffins (cumulative selectivity of ~93% at cumulative TON over 40) via the secondary hydrogenation of olefins as seen from the cumulative paraffin-to-olefin (P/O) ratio of ~21 during CO2 hydrogenation. In comparison, an interpellet In2O3/SAPO-34 admixture yielded majority olefins (cumulative selectivity of ~67% at cumulative TON over 60) due to a lesser degree of secondary hydrogenation (cumulative P/O ratio of ~0.2) on the BAS in SAPO-34, which has a lower acid strength as compared to SSZ-13. Interestingly, both interpellet admixtures of In2O3/SSZ-13 and In2O3/SAPO-34 remained stable during tandem CO2 hydrogenation by favoring the olefin cycle and suppressing the formation of deactivation-inducing-aromatics, unlike MTO, where both admixtures showed fast deactivation. Ion-exchange of BAS (H+) with Inδ+ (from In2O3) in intrapellet admixtures (distance between redox sites and BAS of 270-1500 nm) of In2O3/SSZ-13, and In2O3/SAPO-34, inhibited C-C coupling and predominantly formed CH4. Overall, our study related to the product selectivity and deactivation in MTO and tandem CO2 hydrogenation over CHA framework zeolite/zeotype to the aromatic and olefin pool in the hydrocarbon pool mechanism. These underpinnings will help with rational catalyst design for tandem CO2 hydrogenation.
- Open Access
- 21 July 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Intermediate Transfer Rates and Solid-State Ion Exchange are Key Factors Determining the Bifunctionality of a Tandem CO2 Hydrogenation Catalyst
Probing the interaction between different active sites and transfer of reaction intermediates in bifunctional catalysts for tandem hydrogenation of CO2 is crucial for optimal catalyst design that maximize synergy to achieve high rates and product selectivity. Herein, thermocatalytic conversion of CO2 to hydrocarbon (HC) via a methanol (CH3OH) intermediate was investigated by modulating the placement of In2O3 and HZSM-5 in bifunctional admixtures at temperatures between 350 to 450 °C and 500 psig, to probe the key factors that drive synergy in these bifunctional systems. Analysis of the intermediate CH3OH transfer rates showed that although a millimeter scale placement of In2O3 and HZSM-5 yields a simple tandem reaction with a total HC and methanol CH3OH space-time yield of 8×10-6 molCgcat-1min-1, a microscale placement exhibits a ten-fold increase in catalytic activity with a total HC and CH3OH space-time yield of 8×10-5 molCgcat-1min-1 (at 400 °C) due to a faster advective and diffusive transfer rate of CH3OH. A combination of reactivity, spectroscopy with Raman, X-ray photoelectron spectroscopy (XPS), powder X-ray diffraction (PXRD) patterns, microscopy with scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and control experiments on methanol to hydrocarbons (MTH) revealed that further enhancing the reaction intermediate transfer at a nanoscale placement was counteracted by solid-state ion exchange (SSIE) between Brønsted acid sites (H+) of the HZSM-5 with the Inδ+ ions from In2O3, and that the formation of CH4 at the nanoscale placement was likely through CH3OH hydrogenolysis and not CO2 methanation at these intimate distances. Overall, our data showed the interconnected and subtle ways through which bifunctionality of catalysts could be regulated and paves the way for the development of design principles for designing more effective bifunctional catalysts for tandem CO2 hydrogenation.
- 21 July 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessIntermediate Transfer Rates and Solid-State Ion Exchange are Key Factors Determining the Bifunctionality of a Tandem CO2 Hydrogenation Catalyst
Probing the interaction between different active sites and transfer of reaction intermediates in bifunctional catalysts for tandem hydrogenation of CO2 is crucial for optimal catalyst design that maximize synergy to achieve high rates and product selectivity. Herein, thermocatalytic conversion of CO2 to hydrocarbon (HC) via a methanol (CH3OH) intermediate was investigated by modulating the placement of In2O3 and HZSM-5 in bifunctional admixtures at temperatures between 350 to 450 °C and 500 psig, to probe the key factors that drive synergy in these bifunctional systems. Analysis of the intermediate CH3OH transfer rates showed that although a millimeter scale placement of In2O3 and HZSM-5 yields a simple tandem reaction with a total HC and methanol CH3OH space-time yield of 8×10-6 molCgcat-1min-1, a microscale placement exhibits a ten-fold increase in catalytic activity with a total HC and CH3OH space-time yield of 8×10-5 molCgcat-1min-1 (at 400 °C) due to a faster advective and diffusive transfer rate of CH3OH. A combination of reactivity, spectroscopy with Raman, X-ray photoelectron spectroscopy (XPS), powder X-ray diffraction (PXRD) patterns, microscopy with scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and control experiments on methanol to hydrocarbons (MTH) revealed that further enhancing the reaction intermediate transfer at a nanoscale placement was counteracted by solid-state ion exchange (SSIE) between Brønsted acid sites (H+) of the HZSM-5 with the Inδ+ ions from In2O3, and that the formation of CH4 at the nanoscale placement was likely through CH3OH hydrogenolysis and not CO2 methanation at these intimate distances. Overall, our data showed the interconnected and subtle ways through which bifunctionality of catalysts could be regulated and paves the way for the development of design principles for designing more effective bifunctional catalysts for tandem CO2 hydrogenation.
- Open Access
- 21 July 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Challenges and opportunities for exploiting the role of zeolite confinements for the selective hydrogenation of acetylene
Zeolites, with their ordered crystalline porous structure, provide a unique opportunity to confine metal catalysts, whether single atoms (e.g., transition metal ions (TMIs)) or metal clusters when used as a catalyst support. The confined environment has been shown to provide rate and selectivity enhancement across a variety of reactions via both steric and electronic effects such as size exclusion and transition state stabilization. In this review, we provide a survey of various zeolite confined catalysts used for the semi-hydrogenation of acetylene highlighting their performance, defined by ethylene selectivity at full acetylene conversion, in relationship to the synthesis technique employed. Synthesis methods that ensure confinement with catalyst transition metal location in the extra-framework positions are observed to have the report the highest selectivity to ethylene. However, the underlying molecular factors responsible for selective catalysis within confinement remains elusive due to the difficulty of deconvoluting individual effects. Through the careful use of a combination of characterization and spectroscopic methods, insights into the relationship between the properties of zeolite confined catalysts and their performance have been explored in other works for a variety of reactions. More specifically, operando spectroscopy studies have revealed the dynamic behavior of zeolite confined catalysts under various conditions implying that the structure and properties observed ex-situ do not always match those of the active catalyst under reaction conditions. Applying this type of analysis to acetylene semi-hydrogenation, a simple gas phase reaction, can help elucidate the structure-function relationship of zeolite confined catalysts allowing for more informed design choices and consequently their application to a wider variety of more complex reactions such as the liquid phase hydrogenation of alkynols where solvent effects must also be considered in addition to those of confinement.
- 21 July 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessChallenges and opportunities for exploiting the role of zeolite confinements for the selective hydrogenation of acetylene
Zeolites, with their ordered crystalline porous structure, provide a unique opportunity to confine metal catalysts, whether single atoms (e.g., transition metal ions (TMIs)) or metal clusters when used as a catalyst support. The confined environment has been shown to provide rate and selectivity enhancement across a variety of reactions via both steric and electronic effects such as size exclusion and transition state stabilization. In this review, we provide a survey of various zeolite confined catalysts used for the semi-hydrogenation of acetylene highlighting their performance, defined by ethylene selectivity at full acetylene conversion, in relationship to the synthesis technique employed. Synthesis methods that ensure confinement with catalyst transition metal location in the extra-framework positions are observed to have the report the highest selectivity to ethylene. However, the underlying molecular factors responsible for selective catalysis within confinement remains elusive due to the difficulty of deconvoluting individual effects. Through the careful use of a combination of characterization and spectroscopic methods, insights into the relationship between the properties of zeolite confined catalysts and their performance have been explored in other works for a variety of reactions. More specifically, operando spectroscopy studies have revealed the dynamic behavior of zeolite confined catalysts under various conditions implying that the structure and properties observed ex-situ do not always match those of the active catalyst under reaction conditions. Applying this type of analysis to acetylene semi-hydrogenation, a simple gas phase reaction, can help elucidate the structure-function relationship of zeolite confined catalysts allowing for more informed design choices and consequently their application to a wider variety of more complex reactions such as the liquid phase hydrogenation of alkynols where solvent effects must also be considered in addition to those of confinement.