Ana Nastasić
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ana Nastasić has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Jadranka Milikić
Faculty of Physical Chemistry, University of Belgrade, Studentski trg 12-16, 11158 Belgrade, Serbia
7 shared publications - Dalibor Stanković
Faculty of Chemistry, University of Belgrade, Belgrade, Serbia
5 shared publications - Kristina Radinović
Faculty of Physical Chemistry, University of Belgrade, Studentski trg 12-16, 11158 Belgrade, Serbia
4 shared publications Lazar Rakočević
4 shared publications- Biljana Šljukić
Faculty of Physical Chemistry, University of Belgrade, Studentski trg 12-16, 11158 Belgrade, Serbia
3 shared publications - Ivana Stojković Simatović
Faculty of Physical Chemistry, University of Belgrade, 11000 Belgrade, Serbia
3 shared publications
Latest Publications
- Open Access
Recent Progress in Non-Precious and Carbon-Based Electrocatalysts for the Oxygen Reduction Reaction in Alkaline Media
The oxygen reduction reaction (ORR) is a key process in electrochemical energy conversion technologies such as fuel cells and metal–air batteries; however, its sluggish kinetics and reliance on precious metal catalysts limit large-scale application. This review provides a comprehensive overview of recent advances in non-precious nanoscale electrocatalysts for ORR in alkaline media. Particular emphasis is placed on reaction mechanisms, including dominant pathways, kinetics, and key intermediates, as well as the advantages of alkaline electrolytes over acidic systems. The performance of various catalyst classes is systematically discussed, including transition metal-based materials (Fe, Co, Zn, Cu, and bimetallic systems) and metal-free carbon-based electrocatalysts. Special attention is given to heteroatom-doped carbon materials, carbon nanostructures, and emerging hybrid systems such as MXene-based composites. Comparative analysis highlights the relationship between catalyst composition, structure, and electrochemical performance metrics, including half-wave potential, onset potential, Tafel slope, number of electron transfer, and operational stability. Overall, non-precious catalysts demonstrate promising activity and durability, approaching that of noble metals under alkaline conditions. The insights summarized in this review guide the rational design of efficient, cost-effective ORR electrocatalysts and support the development of sustainable energy technologies.
Open AccessRecent Progress in Non-Precious and Carbon-Based Electrocatalysts for the Oxygen Reduction Reaction in Alkaline Media
The oxygen reduction reaction (ORR) is a key process in electrochemical energy conversion technologies such as fuel cells and metal–air batteries; however, its sluggish kinetics and reliance on precious metal catalysts limit large-scale application. This review provides a comprehensive overview of recent advances in non-precious nanoscale electrocatalysts for ORR in alkaline media. Particular emphasis is placed on reaction mechanisms, including dominant pathways, kinetics, and key intermediates, as well as the advantages of alkaline electrolytes over acidic systems. The performance of various catalyst classes is systematically discussed, including transition metal-based materials (Fe, Co, Zn, Cu, and bimetallic systems) and metal-free carbon-based electrocatalysts. Special attention is given to heteroatom-doped carbon materials, carbon nanostructures, and emerging hybrid systems such as MXene-based composites. Comparative analysis highlights the relationship between catalyst composition, structure, and electrochemical performance metrics, including half-wave potential, onset potential, Tafel slope, number of electron transfer, and operational stability. Overall, non-precious catalysts demonstrate promising activity and durability, approaching that of noble metals under alkaline conditions. The insights summarized in this review guide the rational design of efficient, cost-effective ORR electrocatalysts and support the development of sustainable energy technologies.
- Open Access
Graphene Oxide as Valuable Additive for Improving ZnO Electrochemical Properties: Zn/xGO (x = 0, 0.1, and 0.5 wt.%) as Photoelectrocatalysts for Water Splitting and Electrochemical Sensor for Diclofenac
Graphene oxide (GO) was employed as an additive to improve the electrochemical activity of zinc oxide (ZnO) used as both a photoelectrocatalyst for water splitting and an electrochemical sensor for detection of diclofenac. To comprehend the influence of a small amount of GO on the electrochemical activity of ZnO, a series of ZnO/xGO (x = 0, 0.1, and 0.5) particles was synthesized by microwave processing of Zn(OH)2 precipitate in the presence of 0.1 and 0.5 wt.% of previously prepared GO. The phase composition and crystal structure ordering of ZnO/xGO particles were investigated by XRD and Raman spectroscopy. The optical properties were studied by UV–Vis DRS and PL spectroscopy. The particle morphology was inspected by FE–SEM while the textural properties were analyzed by the low-temperature nitrogen adsorption–desorption method. The (photo)electrocatalytic and electrochemical sensing activities were examined on the ZnO/rxGO modified glassy carbon electrodes (GCEs) prepared by in situ reduction of the ZnO/xGO modified GCEs for 120 s. The electro- and photoelectrocatalytic activity of ZnO/rxGO modified GCEs for water splitting was tested in dark conditions and after 60 min under illumination, respectively, employing linear sweep voltammetry in 0.1 M NaOH and 0.1 M H2SO4 as electrolytes. The electrochemical sensing activity of ZnO/rxGO modified GCEs was tested for detection of diclofenac in aqueous solution. The improvement in the electrochemical activity of ZnO was correlated with the added amount of GO, structural defects, and particle morphology.
Open AccessGraphene Oxide as Valuable Additive for Improving ZnO Electrochemical Properties: Zn/xGO (x = 0, 0.1, and 0.5 wt.%) as Photoelectrocatalysts for Water Splitting and Electrochemical Sensor for Diclofenac
Graphene oxide (GO) was employed as an additive to improve the electrochemical activity of zinc oxide (ZnO) used as both a photoelectrocatalyst for water splitting and an electrochemical sensor for detection of diclofenac. To comprehend the influence of a small amount of GO on the electrochemical activity of ZnO, a series of ZnO/xGO (x = 0, 0.1, and 0.5) particles was synthesized by microwave processing of Zn(OH)2 precipitate in the presence of 0.1 and 0.5 wt.% of previously prepared GO. The phase composition and crystal structure ordering of ZnO/xGO particles were investigated by XRD and Raman spectroscopy. The optical properties were studied by UV–Vis DRS and PL spectroscopy. The particle morphology was inspected by FE–SEM while the textural properties were analyzed by the low-temperature nitrogen adsorption–desorption method. The (photo)electrocatalytic and electrochemical sensing activities were examined on the ZnO/rxGO modified glassy carbon electrodes (GCEs) prepared by in situ reduction of the ZnO/xGO modified GCEs for 120 s. The electro- and photoelectrocatalytic activity of ZnO/rxGO modified GCEs for water splitting was tested in dark conditions and after 60 min under illumination, respectively, employing linear sweep voltammetry in 0.1 M NaOH and 0.1 M H2SO4 as electrolytes. The electrochemical sensing activity of ZnO/rxGO modified GCEs was tested for detection of diclofenac in aqueous solution. The improvement in the electrochemical activity of ZnO was correlated with the added amount of GO, structural defects, and particle morphology.
- Open Access
Non-Precious Electrocatalysts for Alkaline Oxygen Evolution: Transition Metal Compounds, Carbon Supports, and Metal-Free Systems
The oxygen evolution reaction (OER), a key half-reaction in electrochemical water splitting, is limited by sluggish multi-electron transfer kinetics, starting extensive research into efficient, low-cost nanoscale electrocatalysts, particularly those based on nickel, cobalt, and iron, as well as mixed-metal, hybrid, and heteroatom-doped carbon-based metal-free systems, as presented here. Ni- and Co-based electrocatalysts show high efficiency for alkaline OER due to optimized nanostructures, surface modifications, heterostructure design, and multi-metal doping, which enhance activity, stability, and electronic properties. Their performance relies on precise atomic-level control of structure and synergistic interactions, enabling them to approach or rival noble-metal catalysts. Iron-based electrocatalysts are also promising due to their abundance, low cost, and flexible redox chemistry, forming active iron oxyhydroxide species during operation; however, their low conductivity requires structural and electronic optimization. Beyond Fe, Ni, and Co, copper-based compounds, zeolitic imidazolate framework-derived structures, and manganese phosphide–cerium oxide composites offer enhanced oxygen vacancies, tunable structures, and strong interfacial synergy. Furthermore, heteroatom-doped carbon materials incorporating nitrogen, phosphorus, or sulfur improve catalytic activity by modifying electronic structure, creating active sites, and enhancing charge transfer. Overall, careful control of composition, structure, and electronic properties enables the development of efficient, durable, and scalable noble-metal-free catalysts for OER.
Open AccessNon-Precious Electrocatalysts for Alkaline Oxygen Evolution: Transition Metal Compounds, Carbon Supports, and Metal-Free Systems
The oxygen evolution reaction (OER), a key half-reaction in electrochemical water splitting, is limited by sluggish multi-electron transfer kinetics, starting extensive research into efficient, low-cost nanoscale electrocatalysts, particularly those based on nickel, cobalt, and iron, as well as mixed-metal, hybrid, and heteroatom-doped carbon-based metal-free systems, as presented here. Ni- and Co-based electrocatalysts show high efficiency for alkaline OER due to optimized nanostructures, surface modifications, heterostructure design, and multi-metal doping, which enhance activity, stability, and electronic properties. Their performance relies on precise atomic-level control of structure and synergistic interactions, enabling them to approach or rival noble-metal catalysts. Iron-based electrocatalysts are also promising due to their abundance, low cost, and flexible redox chemistry, forming active iron oxyhydroxide species during operation; however, their low conductivity requires structural and electronic optimization. Beyond Fe, Ni, and Co, copper-based compounds, zeolitic imidazolate framework-derived structures, and manganese phosphide–cerium oxide composites offer enhanced oxygen vacancies, tunable structures, and strong interfacial synergy. Furthermore, heteroatom-doped carbon materials incorporating nitrogen, phosphorus, or sulfur improve catalytic activity by modifying electronic structure, creating active sites, and enhancing charge transfer. Overall, careful control of composition, structure, and electronic properties enables the development of efficient, durable, and scalable noble-metal-free catalysts for OER.
- Open Access
- 1 January 2025
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Tehnika
- Vol. 80 (2) , 137-141
The impact of vinyl carbonate additive on the stability of V2O5/rGO composites as cathode materials in rechargeable aqueous magnesium-ion batteries
The influence of vinyl carbonate on the stability of V 2O 5/rGO composites as cathode materials during cycling in an aqueous Mg(NO 3) 2 solution was investigated in this study. The composite was synthesized using the sol-gel method, and thermogravimetric analysis revealed that the composite needed to be further dried at 120°C to achieve a water content of 0.4 moles per mole of oxide. The morphology of the composite was examined using FESEM and showed a rough surface composed of interconnected plate-like particles. The electrochemical characteristics of the V 2O 5/rGO composite were studied using cyclic voltammetry in an aqueous Mg(NO 3) 2 solution with the addition of vinyl carbonate. The results demonstrated that the capacity loss was reduced by 10% after the 10th cycle in the presence of the additive compared to the electrolyte without additive. This improvement in cycling stability is attributed to the formation of a protective film on the electrode surface due to the polymerization of the additive during cycling.
- 1 January 2025
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Tehnika
- Vol. 80 (2) , 137-141
Open AccessThe impact of vinyl carbonate additive on the stability of V2O5/rGO composites as cathode materials in rechargeable aqueous magnesium-ion batteries
The influence of vinyl carbonate on the stability of V 2O 5/rGO composites as cathode materials during cycling in an aqueous Mg(NO 3) 2 solution was investigated in this study. The composite was synthesized using the sol-gel method, and thermogravimetric analysis revealed that the composite needed to be further dried at 120°C to achieve a water content of 0.4 moles per mole of oxide. The morphology of the composite was examined using FESEM and showed a rough surface composed of interconnected plate-like particles. The electrochemical characteristics of the V 2O 5/rGO composite were studied using cyclic voltammetry in an aqueous Mg(NO 3) 2 solution with the addition of vinyl carbonate. The results demonstrated that the capacity loss was reduced by 10% after the 10th cycle in the presence of the additive compared to the electrolyte without additive. This improvement in cycling stability is attributed to the formation of a protective film on the electrode surface due to the polymerization of the additive during cycling.
- 30 November 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 97, 247-258
Efficient nano-size ZnM/rGO (M = Ni, Cu, and Fe) electrocatalysts for oxygen electrode reactions in alkaline media
- 30 November 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 97, 247-258
Efficient nano-size ZnM/rGO (M = Ni, Cu, and Fe) electrocatalysts for oxygen electrode reactions in alkaline media
- Open Access
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Tehnika
- Vol. 79 (3) , 245-249
Electrochemical characteristics of V2O5/rGO composite as electrode material for Mg-ion batteries with aqueous electrolyte
Herein, the composite of vanadium pentoxide and graphene oxide (V2O5/GO) was synthesized by the solgel method. The synthesized composite V2O5/GO was characterized by X-Ray diffraction analysis and Raman spectroscopy. After in situ reduction of GO, the electrochemical characteristics of V2O5/rGO were analyzed by cyclic voltammetry in Mg(NO3)2 aqueous solutions. The V2O5/rGO composite showed following intercalation capacities: initially 139.1 mA h g-1 and 101.8 mA h g-1 after the 10th cycle, which along with easy, fast and low-cost synthesis, make this composite a potentially good electrode material for application in secondary aqueous magnesium-ion batteries.
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Tehnika
- Vol. 79 (3) , 245-249
Open AccessElectrochemical characteristics of V2O5/rGO composite as electrode material for Mg-ion batteries with aqueous electrolyte
Herein, the composite of vanadium pentoxide and graphene oxide (V2O5/GO) was synthesized by the solgel method. The synthesized composite V2O5/GO was characterized by X-Ray diffraction analysis and Raman spectroscopy. After in situ reduction of GO, the electrochemical characteristics of V2O5/rGO were analyzed by cyclic voltammetry in Mg(NO3)2 aqueous solutions. The V2O5/rGO composite showed following intercalation capacities: initially 139.1 mA h g-1 and 101.8 mA h g-1 after the 10th cycle, which along with easy, fast and low-cost synthesis, make this composite a potentially good electrode material for application in secondary aqueous magnesium-ion batteries.
- Open Access
Air Cathodes and Bifunctional Oxygen Electrocatalysts for Aqueous Metal–Air Batteries
One of the most popular solutions for electrochemical energy storage is metal–air batteries, which could be employed in electric vehicles or grid energy storage. Metal–air batteries have a higher theoretical energy density than lithium-ion batteries. The crucial components for the best performance of batteries are the air cathode electrocatalysts and corresponding electrolytes. Herein, we present several of the latest studies on electrocatalysts for air cathodes and bifunctional oxygen electrocatalysts for aqueous zinc–air and aluminium–air batteries.
Open AccessAir Cathodes and Bifunctional Oxygen Electrocatalysts for Aqueous Metal–Air Batteries
One of the most popular solutions for electrochemical energy storage is metal–air batteries, which could be employed in electric vehicles or grid energy storage. Metal–air batteries have a higher theoretical energy density than lithium-ion batteries. The crucial components for the best performance of batteries are the air cathode electrocatalysts and corresponding electrolytes. Herein, we present several of the latest studies on electrocatalysts for air cathodes and bifunctional oxygen electrocatalysts for aqueous zinc–air and aluminium–air batteries.