Abdulmalik S. Alshammari
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Abdulmalik S. Alshammari has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Ahmed Ali Basfar
Mechanical Engineering Department, College of Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia
2 shared publications - Eid M. Alosime
King Abdulaziz City for Science and Technology (KACST), P.O. Box 6086, Riyadh 11442, Saudi Arabia
1 shared publication - Mohammed S. Almeataq
King Abdulaziz City for Science and Technology, Riyadh 11442, Saudi Arabia
1 shared publication
Latest Publications
- Open Access
Polyphosphate-Functionalized PGMA-Grafted Mesoporous Silica Nanoparticles for Selective U(VI) Removal from Aqueous Solutions
Uranium(VI) contamination in aquatic environments poses significant environmental and public health concerns, creating a need for efficient and selective adsorbents. In this study, polyphosphate-functionalized poly(glycidyl methacrylate)-grafted mesoporous silica nanoparticles (PP-PGMA/MSNs) were successfully synthesized and evaluated for U(VI) removal from aqueous solutions. A key novelty of this work lies in the incorporation of phosphate-rich functionalities onto PGMA-grafted MSNs prepared via ATRP, together with the systematic investigation of their effects on U(VI) adsorption equilibrium and selectivity in multi-metal systems. Fourier-transform infrared spectroscopy (FTIR), Brunauer–Emmett–Teller (BET), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA) confirmed the successful incorporation of phosphate-containing functional groups onto the MSN surface. The adsorbent exhibited rapid adsorption, reaching equilibrium within 120 min, with optimum performance observed at pH 4–6. A maximum U(VI) removal efficiency of 73.81% was achieved at an initial concentration of 10 mg L−1, while the maximum adsorption capacity reached 114.94 mg g−1. Equilibrium data were well described by the Langmuir isotherm model (R2 = 0.9697), indicating predominantly monolayer adsorption on relatively homogeneous adsorption sites. Despite a substantial reduction in surface area following functionalization, the material maintained a high adsorption capacity, suggesting that uranium uptake is governed primarily by interactions at phosphate-containing active sites. Furthermore, the adsorbent exhibited preferential affinity toward U(VI) in multi-metal systems containing Cr, Ni, Cu, Zn, Cd, and Pb ions, demonstrating enhanced selectivity toward uranyl species. The adsorption behavior suggests that phosphate functionalities serve as the primary binding sites through surface complexation and coordination interactions. These findings demonstrate the potential of PP-PGMA/MSNs as selective adsorbents for U(VI) removal from complex aqueous systems and environmental remediation applications.
Open AccessPolyphosphate-Functionalized PGMA-Grafted Mesoporous Silica Nanoparticles for Selective U(VI) Removal from Aqueous Solutions
Uranium(VI) contamination in aquatic environments poses significant environmental and public health concerns, creating a need for efficient and selective adsorbents. In this study, polyphosphate-functionalized poly(glycidyl methacrylate)-grafted mesoporous silica nanoparticles (PP-PGMA/MSNs) were successfully synthesized and evaluated for U(VI) removal from aqueous solutions. A key novelty of this work lies in the incorporation of phosphate-rich functionalities onto PGMA-grafted MSNs prepared via ATRP, together with the systematic investigation of their effects on U(VI) adsorption equilibrium and selectivity in multi-metal systems. Fourier-transform infrared spectroscopy (FTIR), Brunauer–Emmett–Teller (BET), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA) confirmed the successful incorporation of phosphate-containing functional groups onto the MSN surface. The adsorbent exhibited rapid adsorption, reaching equilibrium within 120 min, with optimum performance observed at pH 4–6. A maximum U(VI) removal efficiency of 73.81% was achieved at an initial concentration of 10 mg L−1, while the maximum adsorption capacity reached 114.94 mg g−1. Equilibrium data were well described by the Langmuir isotherm model (R2 = 0.9697), indicating predominantly monolayer adsorption on relatively homogeneous adsorption sites. Despite a substantial reduction in surface area following functionalization, the material maintained a high adsorption capacity, suggesting that uranium uptake is governed primarily by interactions at phosphate-containing active sites. Furthermore, the adsorbent exhibited preferential affinity toward U(VI) in multi-metal systems containing Cr, Ni, Cu, Zn, Cd, and Pb ions, demonstrating enhanced selectivity toward uranyl species. The adsorption behavior suggests that phosphate functionalities serve as the primary binding sites through surface complexation and coordination interactions. These findings demonstrate the potential of PP-PGMA/MSNs as selective adsorbents for U(VI) removal from complex aqueous systems and environmental remediation applications.
- Open Access
Treatment of Uranium-Contaminated Ground Water Using Adsorption Technology via Novel Mesoporous Silica Nanoparticles
Contamination of underground water by uranium (U) and other heavy metals is a growing concern. Mesoporous silica nanoparticles (MSNs) have shown great potential as an adsorbent material for heavy metal removal. This study synthesized a novel MSN using surface-initiated atom transfer radical polymerization (SI-ATRP) and evaluated its effectiveness for removing uranium from aqueous solutions under different conditions. The particle size was reduced to 150–240 nm to enhance adsorption. Fourier transform infrared characterization and thermogravimetric analysis confirmed successful synthesis and modification. Results showed that the MSN adsorbent was highly effective in removing U, with a removal rate of 85.35% at 120 min. Temperature had a significant impact, with the highest removal rate of 96.7% achieved at 25 °C and a U concentration of 10 ppm. The highest removal rate of 91.89% was achieved at a pH of 6 and a U concentration of 50 ppm. The highest removal rate of 95.16% was achieved at 25 mg and a U concentration of 50 ppm at room temperature for 60 min. The MSNs also showed a 58.27% removal rate in a mixture solution at room temperature for 60 min. This study demonstrates the effectiveness of the MSN adsorbent for removing U under different conditions.
Open AccessTreatment of Uranium-Contaminated Ground Water Using Adsorption Technology via Novel Mesoporous Silica Nanoparticles
Contamination of underground water by uranium (U) and other heavy metals is a growing concern. Mesoporous silica nanoparticles (MSNs) have shown great potential as an adsorbent material for heavy metal removal. This study synthesized a novel MSN using surface-initiated atom transfer radical polymerization (SI-ATRP) and evaluated its effectiveness for removing uranium from aqueous solutions under different conditions. The particle size was reduced to 150–240 nm to enhance adsorption. Fourier transform infrared characterization and thermogravimetric analysis confirmed successful synthesis and modification. Results showed that the MSN adsorbent was highly effective in removing U, with a removal rate of 85.35% at 120 min. Temperature had a significant impact, with the highest removal rate of 96.7% achieved at 25 °C and a U concentration of 10 ppm. The highest removal rate of 91.89% was achieved at a pH of 6 and a U concentration of 50 ppm. The highest removal rate of 95.16% was achieved at 25 mg and a U concentration of 50 ppm at room temperature for 60 min. The MSNs also showed a 58.27% removal rate in a mixture solution at room temperature for 60 min. This study demonstrates the effectiveness of the MSN adsorbent for removing U under different conditions.