WLWenyu Luo

Wenyu Luo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Wenyu Luo has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Temperature-dependent characterization of full matrix constants of sodium-doped Bi4Ti3O12 ceramics mainly through resonant ultrasound spectroscopy

    by Ailing Xiao, Wenrui Xiao, Ruilin Cai, Wuyi Yang, Liguo Tang, Yongjun Yang, Youquan Chen, Wenyu Luo, Xiaokang Zhang

  • Open Access

    Trans-Dimensional Geoacoustic Inversion in Shallow Water Using a Range-Dependent Layered Geoacoustic Model

    by Juan Kang, Zhaohui Peng, Li He, Wenyu Luo, Qianyu Wang

    Generally, most inversion approaches model the seabed as a stack of range-independent homogeneous layers with unknown geoacoustic parameters and layer numbers. In our previous study, we established a layered geoacoustic seabed model based on sub-bottom profiler data to characterize low-frequency (100–500 Hz) airgun signal propagation at short ranges (0–20 km). However, when applying the same model to simulate high-frequency (500–1000 Hz) explosive sound signal propagation, it failed to adequately reproduce the observed significant transmission loss phenomenon. Through systematic analysis of transmission loss (including water column sound speed profiles, seabed topography, and sediment properties), this study proposes a range-dependent layered geoacoustic model using the Range-dependent Acoustic Model–Parabolic Equation (RAM-PE). Stepwise inversion implementation has successfully explained the observed experimental phenomena. To generalize the proposed model, this study further introduces a trans-dimensional inversion framework that automatically resolves sediment property interfaces along propagation paths. The method effectively combines prior information with trans-dimensional inversion techniques, providing improved characterization of range-dependent seabed environments.

  • Deep learning with mode omission tolerance as inversion tool in resonant ultrasound spectroscopy for characterizing piezoelectric materials

    by Wuyi Yang, Shanshan Sun, Liguo Tang, Wenyu Luo, Jianming Wu

    Resonant ultrasound spectroscopy (RUS) is an excellent alternative to electric resonance for characterizing the elastic and piezoelectric constants (EPCs) of piezoelectric materials with high mechanical quality factors. The RUS inversion tool must tolerate mode omissions because they are often difficult to avoid when using RUS measurements. In this study, a combination of RUS and a deep neural network (DNN) was proposed to characterize the EPCs of piezoelectric materials. The DNN configured to permit mode omission was designed and trained to precisely determine the EPCs from the resonance frequencies under the given clamped dielectric constants, density, and dimensions. The practicability and reliability of using the DNN as an inversion tool in RUS with mode omission tolerance were demonstrated by characterizing the EPCs of lead zirconate titanate ceramics. The DNN, after it was trained, was more efficient than the traditional nonlinear least squares method.


  • Single-Sample Characterization of Temperature-Dependent Full Matrix Material Constants for Strongly Anisotropic [011] C Poled Pb(Mg 1/3 Nb 2/3 ) O 3 –28PbTiO 3 Single Crystals

    by Wenrui Xiao, Ailing Xiao, Wuyi Yang, Liguo Tang, Guisheng Xu, Wenyu Luo, Xiaokang Zhang

    Owing to their superior transverse electromechanical properties, [011]C poled relaxor-based ferroelectric single crystals are suitable for fabricating high-performance transverse-mode sensors and actuators. Device operation at various temperatures requires an understanding of the temperature-dependent full matrix material constants of [011]C poled relaxor-based single crystals. However, there are no published results regarding this yet, because the determination of these constants is complicated by the number of variables involved and the inconsistencies introduced by measuring multiple samples using conventional methods. In this study, the temperature-dependent full matrix material constants of [011]C poled Pb(Mg1/3Nb2/3)O3–28PbTiO3 single crystals were characterized using a single rectangular block sample. A modified resonant ultrasound spectroscopy technique was employed to determine the elastic and piezoelectric constants in the temperature range of 20–50 °C. To improve the mode identification efficiency and inversion reliability, the resonance frequencies of the sample under different boundary conditions were used during inversion. This approach overcame the self-consistency issue associated with results obtained using multiple-sample methods, such as electric resonance.

  • Open Access

    Frequency-difference sparse Bayesian learning for unambiguous direction-of-arrival estimation

    by Ze Yuan, Haiqiang Niu, Zhenglin Li, Wenyu Luo

    The frequency-difference (FD) method uses the FD Hadamard product, comprising auto-products to model below-band acoustic fields and unintended cross-products, for efficient direction-of-arrival (DOA) estimation under spatial aliasing. Despite improved resolution from compressive sensing, spurious peaks arise as a result of cross-products lacking counterparts in the sensing matrix. The proposed method addresses this by reconstructing the sensing matrix with the full Hadamard product and applying sparse Bayesian learning to estimate a two-dimensional hyperparameter matrix, extracting its diagonal to suppress spurious DOAs. Simulations show that it outperforms previous compressive FD methods in detecting weak targets, where advantages increase as source numbers grow.


  • Open Access

    Horizontal-Transverse Coherence of Bottom-Received Acoustic Field in Deep Water with an Incomplete Sound Channel

    by Qianyu Wang, Zhaohui Peng, Bo Zhang, Feilong Zhu, Wenyu Luo, Tongchen Wang, Lingshan Zhang, Junjie Mao

    The horizontal-transverse coherence of low-frequency (300 Hz) and long-range (10–40 km) acoustic fields near the bottom in deep water is investigated based on experimental data obtained from the South China Sea. The results indicate that the horizontal-transverse coherence length exhibits a strong dependence on the source-receiver distance, with fluctuations consistent with sound intensity trends. In high-intensity regions, the horizontal-transverse coherence is relatively high, with a coherence length exceeding 600 λ, where λ is the acoustic wavelength, whereas in low-intensity regions, the horizontal-transverse coherence decreases significantly, with the coherence length shortening to 10–30 λ. The physical mechanisms underlying the horizontal-transverse coherence are analyzed using the ray theory. In high-intensity regions, the energy of the dominant ray (the ray with the highest energy) accounts for over 70% of the total energy of the rays, exerting a decisive influence on the coherence coefficient and leading to stable horizontal-transverse coherence in the received acoustic field. In contrast, in low-intensity regions, the energy distribution is dispersed, and when amplitude and phase disturbances due to spatial inhomogeneity are introduced, the horizontal coherence deteriorates significantly. The numerical simulations are also performed, and the results are consistent with the experimental observations.


  • Comparison of Characterization Methods for Assessing the Temperature Dependencies of Elastic and Piezoelectric Constants of Piezoelectric Materials

    by Ailing Xiao, Liguo Tang, Shanshan Sun, Songji Wu, Xinye Wu, Wenyu Luo

    The accurate characterization of the temperature dependencies (TD) of the full tensorial properties of piezoelectric materials (PMs) makes it possible to predict the performance of electromechanical devices fabricated using PMs at different temperatures. The electric resonance (ER) and the resonant ultrasound spectroscopy (RUS) methods—used to characterize the TD of the elastic and piezoelectric constants (EPCs) of PMs—are systematically compared by characterizing Fuji C-213 lead zirconate titanate ceramics. Five samples must be used in ER; however, RUS needs one sample only. Therefore, the preparation of ER samples requires time that is approximately five times higher than that of the RUS sample. Moreover, the temperature-dependent ER measurement requires times that are more than three times than that required by the RUS measurement. RUS can only characterize samples with a high-mechanical quality factor which should be greater than several hundred. RUS takes more time than ER on data processing. Most material constants characterized using RUS are consistent with those characterized using ER. Overall, RUS can obtain more accurate EPCs than ER, which is proved by comparing the measured electric impedance spectra with those calculated using the ER and RUS results. ER has been extensively used to characterize PMs, however, RUS has not, due to the lack of the commercial RUS software for PMs. It is very difficult to develop. This study provides a reference for the selection of various methods for characterizing the TD of the EPCs of PMs. Moreover, it may facilitate the development of RUS for characterizing PMs.


  • Open Access

    A Finite Element Model for Underwater Sound Propagation in 2-D Environment

    by Yi-Qing Zhou, Wen-Yu Luo

    The finite element method is a popular numerical method in engineering applications. However, there is not enough research about the finite element method in underwater sound propagation. The finite element method can achieve high accuracy and great universality. We aim to develop a three-dimensional finite element model focusing on underwater sound propagation. As the foundation of this research, we put forward a finite element model in the Cartesian coordinate system for a sound field in a two-dimensional environment. We firstly introduce the details of the implementation of the finite element model, as well as different methods to deal with boundary conditions and a comparison of these methods. Then, we use four-node quadrilateral elements to discretize the physical domain, and apply the perfectly matched layer approach to deal with the infinite region. After that, we apply the model to underwater sound propagation problems including the wedge-shaped waveguide benchmark problem and the problem where the bathymetry consists of a sloping region and a flat region. The results by the presented finite element model are in excellent agreement with analytical and benchmark numerical solutions, implying that the presented finite element model is able to solve complex two-dimensional underwater sound propagation problems accurately. In the end, we compare the finite element model with the popular normal mode model KRAKEN by calculating sound fields in Pekeris waveguides, and find that the finite element model has better universality than KRAKEN.


  • Open Access

    Seasonally-invariant head wave speed extracted from ocean noise cross-correlation

    by Xishan Yang, Fenghua Li, Bo Zhang, Wenyu Luo

    Ambient noise was recorded continuously for 9 months by two horizontal arrays deployed in shallow water with a horizontal separation of approximately 0.5 km. Stable empirical Green's functions (EGFs) were extracted from ambient noise correlations between the two arrays. The EGFs have three distinct envelopes which correspond to the head waves, direct waves, and surface-reflected waves. The arrival time of the head wave was almost constant with season. Corresponding simulations were carried out, and implied that the relatively small penetration depth of heat flow is the main reason for the seasonally-invariant head wave speed.


  • Open Access

    Measurement and modeling of sound propagation over continental slope in the South China Sea

    by Jin Liu, Zhaohui Peng, Zhenglin Li, Wenyu Luo, Xishan Yang

    Measurements along two ship tracks were obtained in an experiment to investigate the properties of acoustic propagation over the continental slope in the South China Sea. The measured data show a notable difference in transmission loss about 35 dB as sound crosses different geodesic paths. Numerical simulations indicate that the range and azimuth-dependent geological properties control the level of the transmission loss and lead to this large transmission loss fluctuation. In addition, the model also suggests some small-scale features of horizontal refraction effect caused by irregular topography, but they are not observed in the measured data.