Uroš Jakšić
Research Subjects
Uroš Jakšić has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Nenad Marković
High Technical School of Professional Studies Urosevac, in Leposavic Serbia
4 shared publications - Bojan Stojčetović
Academy of Applied Studies of Kosovo and Metohia, 38218 Leposavic, Serbia
1 shared publication - Djordje Nikolic
University of Belgrade
1 shared publication J. Živanić
Faculty of Technical Sciences, University of Kragujevac, Svetog Save 65, 32000 Čačak, Serbia
1 shared publication- Jeroslav Živanić
Faculty of Technical Sciences, Čačak
1 shared publication Miljan R. Mirković
1 shared publication
Latest Publications
- Open Access
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Tehnika
- Vol. 79 (3) , 325-331
Analysis of the operation of the ground fault protection at the output 10 kV
For the normal functioning of the power system, it is necessary to ensure adequate protection of each elements. Part of the electric power system are electric networks, the term of which will primarily mean lines (air and cable). In the paper, the operation of basic line protections was analyzed by mathematical calculations and field measurements. The earth fault protection was caused in the field in order to compare it with the mathematical calculation and draw conclusions about the correct setting and full functionality of the relay protection. Power grid protection is a key aspect for the safety and normal operation of power systems. This analysis includes tests of protection equipment through simulations of earth fault event. The testing is of great importance for new power system maintenance strategies.
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Tehnika
- Vol. 79 (3) , 325-331
Open AccessAnalysis of the operation of the ground fault protection at the output 10 kV
For the normal functioning of the power system, it is necessary to ensure adequate protection of each elements. Part of the electric power system are electric networks, the term of which will primarily mean lines (air and cable). In the paper, the operation of basic line protections was analyzed by mathematical calculations and field measurements. The earth fault protection was caused in the field in order to compare it with the mathematical calculation and draw conclusions about the correct setting and full functionality of the relay protection. Power grid protection is a key aspect for the safety and normal operation of power systems. This analysis includes tests of protection equipment through simulations of earth fault event. The testing is of great importance for new power system maintenance strategies.
- Open Access
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Bakar
- Vol. 49 (1) , 41-58
Protection of HV and MV lines in electric power distribution Kruševac with special emphasis on microprocessor relay protection
The aim of the paper is to present the method of implementing and using relay protection with a special emphasis on microprocessor relay protection in Electric power distribution Kruševac, and based on the presented concrete examples of settings and operation of protective devices that were collected from practice and paper in the field. The software packages Test Universe were used in the paper for testing protection in TS "Kruševac 1" on the 1158B transmission line in the direction of "Kruševac 4" on the 110 kV network, as wel as Test Universe software package for testing protection in TS "Kruševac 1" on the 1158B transmission line in the direction of "Kruševac 4" on the 110 kV network. During the test, movement of the current and voltage values, disconnection times, as well as characteristics that show operation of each protection were monitored on the computer. The paper in the practical part shows the detailed connection of the equipment for testing the functions of the microprocessor protection relay of the 110 kV transmission line. For a specific transmission line, parameters, images of devices and complete test equipment, as well as official test lists with actual tripping values are provided. Advantage of modern microprocessor relays reflects in the fact that all functions are combined in one compact box that communicate with each other using special protocols and thus facilitate the work of users.
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Bakar
- Vol. 49 (1) , 41-58
Open AccessProtection of HV and MV lines in electric power distribution Kruševac with special emphasis on microprocessor relay protection
The aim of the paper is to present the method of implementing and using relay protection with a special emphasis on microprocessor relay protection in Electric power distribution Kruševac, and based on the presented concrete examples of settings and operation of protective devices that were collected from practice and paper in the field. The software packages Test Universe were used in the paper for testing protection in TS "Kruševac 1" on the 1158B transmission line in the direction of "Kruševac 4" on the 110 kV network, as wel as Test Universe software package for testing protection in TS "Kruševac 1" on the 1158B transmission line in the direction of "Kruševac 4" on the 110 kV network. During the test, movement of the current and voltage values, disconnection times, as well as characteristics that show operation of each protection were monitored on the computer. The paper in the practical part shows the detailed connection of the equipment for testing the functions of the microprocessor protection relay of the 110 kV transmission line. For a specific transmission line, parameters, images of devices and complete test equipment, as well as official test lists with actual tripping values are provided. Advantage of modern microprocessor relays reflects in the fact that all functions are combined in one compact box that communicate with each other using special protocols and thus facilitate the work of users.
- Open Access
- 1 January 2021
- Published by National Library of Serbia in Thermal Science
- Vol. 25 (3 Part A) , 1731-1742
Development and prioritization of renewable energy scenarios using SWOT-FANP methodology
The main goal of this paper is to develop and prioritize renewable energy scenarios for electricity production. The model proposed in the paper was applied on the example of the municipality of Strpce, enclave in south Kosovo**. The model consists out of three phases, and the decision-making and planning process involves a group of decision makers, i.e. selected experts and stakeholders. In the first phase, a group of decision makers, using a collaborative planning method and Homer pro software, defined eight renewable energy scenarios based on renewable energy potentials and electricity demand in Strpce. In the second phase, a group of decision makers, using the strengths, weaknesses, opportunities, and threats analysis, defined a total of 22 criteria to evaluate scenarios. Finally, in the third phase, a group of decision makers used fuzzy analytical network process methodology to prioritize scenarios. Results show that a scenario that includes installation of photovoltaic panels in Strpce households to cover 50% of the electricity demand is first ranked. The proposed model has a universal character which means that it can be applied in other municipalities/cities and regions. Also, the model enables collaborative planning through the inclusion of different stakeholders whose number and type can be adjusted according to the subject/area of research.
- 1 January 2021
- Published by National Library of Serbia in Thermal Science
- Vol. 25 (3 Part A) , 1731-1742
Open AccessDevelopment and prioritization of renewable energy scenarios using SWOT-FANP methodology
The main goal of this paper is to develop and prioritize renewable energy scenarios for electricity production. The model proposed in the paper was applied on the example of the municipality of Strpce, enclave in south Kosovo**. The model consists out of three phases, and the decision-making and planning process involves a group of decision makers, i.e. selected experts and stakeholders. In the first phase, a group of decision makers, using a collaborative planning method and Homer pro software, defined eight renewable energy scenarios based on renewable energy potentials and electricity demand in Strpce. In the second phase, a group of decision makers, using the strengths, weaknesses, opportunities, and threats analysis, defined a total of 22 criteria to evaluate scenarios. Finally, in the third phase, a group of decision makers used fuzzy analytical network process methodology to prioritize scenarios. Results show that a scenario that includes installation of photovoltaic panels in Strpce households to cover 50% of the electricity demand is first ranked. The proposed model has a universal character which means that it can be applied in other municipalities/cities and regions. Also, the model enables collaborative planning through the inclusion of different stakeholders whose number and type can be adjusted according to the subject/area of research.
- Open Access
- 6 February 2018
- Published by Sciencedomain International in Current Journal of Applied Science and Technology
- Vol. 25 (6) , 1-10
Development of the Model for Simulation of Transient Processes in Cables and Power Lines
Aims: The paper presents a model of the power line and the equivalent scheme for the simulation of the transient processes. Many constructions of conductive lines are such that mutual parameters (inductance, capacitance) are the same for any pair of phases, and the phase parameters themselves are approximately the same for all three phases. Therefore, the approximation of three-phase conductors with symmetric single-phase conductors is justified. A special way in which the power lines are considered is a method called a sequence model of three-phase line. Methodology: Techniques used in this paper are based on analytic methods and the formation of algorithms. Modeling and simulation are processes that are necessary for testing faults in measuring transformers in relay protection (current/voltage) when they are very remote and electrically connected by cables. The first step in problem-solving was to define the theoretical model for estimation of the impact of variable parameters on the transmission of electric energy. Further step represented in the paper is simulation of transient processes on different lengths of the power lines when modeling lines and cables, one starts from the fact that parameters differ in certain parts, in lengths, i.e. that the parameters are variable in length, which results in change of longitudinal parameters of basic quadripoles in equivalent schemes. Conclusion: The specificity of the model is that the initial conditions matrix is determined depending on the condition at the beginning of the line and load in equivalent scheme and arises from the idle time or short circuit at the output of the quadripoles. The solution for transient state with the application of quadripole in the equivalent scheme is obtained by matrix procedure using equivalent schemes and by simulation method in the MATLAB program.
- 6 February 2018
- Published by Sciencedomain International in Current Journal of Applied Science and Technology
- Vol. 25 (6) , 1-10
Open AccessDevelopment of the Model for Simulation of Transient Processes in Cables and Power Lines
Aims: The paper presents a model of the power line and the equivalent scheme for the simulation of the transient processes. Many constructions of conductive lines are such that mutual parameters (inductance, capacitance) are the same for any pair of phases, and the phase parameters themselves are approximately the same for all three phases. Therefore, the approximation of three-phase conductors with symmetric single-phase conductors is justified. A special way in which the power lines are considered is a method called a sequence model of three-phase line. Methodology: Techniques used in this paper are based on analytic methods and the formation of algorithms. Modeling and simulation are processes that are necessary for testing faults in measuring transformers in relay protection (current/voltage) when they are very remote and electrically connected by cables. The first step in problem-solving was to define the theoretical model for estimation of the impact of variable parameters on the transmission of electric energy. Further step represented in the paper is simulation of transient processes on different lengths of the power lines when modeling lines and cables, one starts from the fact that parameters differ in certain parts, in lengths, i.e. that the parameters are variable in length, which results in change of longitudinal parameters of basic quadripoles in equivalent schemes. Conclusion: The specificity of the model is that the initial conditions matrix is determined depending on the condition at the beginning of the line and load in equivalent scheme and arises from the idle time or short circuit at the output of the quadripoles. The solution for transient state with the application of quadripole in the equivalent scheme is obtained by matrix procedure using equivalent schemes and by simulation method in the MATLAB program.
- Open Access
- 1 February 2017
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 24 (1) , 265-271
Simulation of the impact of higher harmonics on the transient process of induction machine fed from PWM inverters
U radu je prikazan osnovni matematički model (algoritam) za određivanje stanja indukcionog stroja kao i postupak simulacije mjerenja pojedinih vrijednosti u programu MATLAB. Na izlaznim listama prikazana je shema mjernog sustava i...
- 1 February 2017
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 24 (1) , 265-271
Open AccessSimulation of the impact of higher harmonics on the transient process of induction machine fed from PWM inverters
U radu je prikazan osnovni matematički model (algoritam) za određivanje stanja indukcionog stroja kao i postupak simulacije mjerenja pojedinih vrijednosti u programu MATLAB. Na izlaznim listama prikazana je shema mjernog sustava i...