Mahmut Kayar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mahmut Kayar has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Yalçın Boztoprak
Technology Faculty, Metallurgy and Materials Engineering, Marmara University 2 , İstanbul 34854
2 shared publications - Abdurrrahim Yilmaz
MİMAR SİNAN GÜZEL SANATLAR ÜNİVERSİTESİ, MESLEK YÜKSEKOKULU
1 shared publication - Aysun Türkmen
ÜNİVERSİTE
1 shared publication - Burak Matyar
Bursa Uludağ Üniversitesi Mühendislik Fakültesi Otomotiv Mühendisliği Görükle 16059 Bursa Türkiye
1 shared publication Cebrail Ölmez
1 shared publication- Doğu Ramazanoğlu
Duzce Universitesi
1 shared publication
Latest Publications
- 1 July 2026
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 36 (2) , 140-149
ANN-Based Modelling of Seam Strength for Ultrasonically Sewn Nonwoven Fabrics
The demand for protective textiles surged during the COVID-19 pandemic, accelerating the adoption of ultrasonic sewing for nonwoven assemblies. This study develops an artificial neural network (ANN) to predict the ultrasonic seam tensile strength of thermally bonded nonwoven fabrics from fabric, fibre, and process parameters. The model uses 15 inputs spanning fibre composition and properties, calender conditions, fabric basis weight and tensile properties, and anvil-wheel (roller) configuration, and is evaluated on previously unseen test samples. The ANN attains R² ≈ 0.84, MAE = 5.17 N, RMSE = 6.56 N (MSE = 43.00 N²), demonstrating strong standardisation beyond the training data. Consistent with industrial practice and the directional anisotropy of such materials, the study focuses on the machine direction (MD), which governs cutting and seam design in production; cross-direction (CD) testing was not included due to very low loads and poor reproducibility for the investigated material set. These results indicate that seam strength can be estimated without physical ultrasonic sewing, enabling faster material screening and reducing experimental iterations during process-window selection and product development. The approach provides a practical decision aid for the manufacturing of medical and hygiene nonwovens and can be readily integrated with feature-importance analyses to guide parameter prioritisation.
- 1 July 2026
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 36 (2) , 140-149
ANN-Based Modelling of Seam Strength for Ultrasonically Sewn Nonwoven Fabrics
The demand for protective textiles surged during the COVID-19 pandemic, accelerating the adoption of ultrasonic sewing for nonwoven assemblies. This study develops an artificial neural network (ANN) to predict the ultrasonic seam tensile strength of thermally bonded nonwoven fabrics from fabric, fibre, and process parameters. The model uses 15 inputs spanning fibre composition and properties, calender conditions, fabric basis weight and tensile properties, and anvil-wheel (roller) configuration, and is evaluated on previously unseen test samples. The ANN attains R² ≈ 0.84, MAE = 5.17 N, RMSE = 6.56 N (MSE = 43.00 N²), demonstrating strong standardisation beyond the training data. Consistent with industrial practice and the directional anisotropy of such materials, the study focuses on the machine direction (MD), which governs cutting and seam design in production; cross-direction (CD) testing was not included due to very low loads and poor reproducibility for the investigated material set. These results indicate that seam strength can be estimated without physical ultrasonic sewing, enabling faster material screening and reducing experimental iterations during process-window selection and product development. The approach provides a practical decision aid for the manufacturing of medical and hygiene nonwovens and can be readily integrated with feature-importance analyses to guide parameter prioritisation.
- Open Access
- 24 December 2024
- Published by Özgür Yayınları
- p. 45-62
The Impact of Social Media Phenomena’ on Fashion Through Social Media in Türki̇ye and New Trends in the World
Social media has become an indispensable element of our lives with the development of technology and the increasing usage of smartphones. Individuals’ instant access to any information they want has removed all the limits to accessing information. All sectors are affected by this technological development positively or negatively, and companies have to use social media tools not only to sell products to customers who use products but also to watch, listen, reach, communicate, get to know and evaluate them. Therefore, these channels have created some new concepts thanks to their users and as a result, some new job descriptions have emerged. One of these is social media influencers. It is seen that these influencers inform their followers about the textile products they use, direct them, and sometimes even block them, causing sales to decrease. This development, which companies cannot remain indifferent to, causes some brands in the sector to make agreements with these influencers. Within the scope of this study, the positive and negative effects of social media influencers on the fashion industry will be examined, and the attitudes of companies in social media and the power of influencers in the industry will be discussed. The data regarding the phenomena mentioned in the study are limited to the phenomena in Türkiye.
- 24 December 2024
- Published by Özgür Yayınları
- p. 45-62
Open AccessThe Impact of Social Media Phenomena’ on Fashion Through Social Media in Türki̇ye and New Trends in the World
Social media has become an indispensable element of our lives with the development of technology and the increasing usage of smartphones. Individuals’ instant access to any information they want has removed all the limits to accessing information. All sectors are affected by this technological development positively or negatively, and companies have to use social media tools not only to sell products to customers who use products but also to watch, listen, reach, communicate, get to know and evaluate them. Therefore, these channels have created some new concepts thanks to their users and as a result, some new job descriptions have emerged. One of these is social media influencers. It is seen that these influencers inform their followers about the textile products they use, direct them, and sometimes even block them, causing sales to decrease. This development, which companies cannot remain indifferent to, causes some brands in the sector to make agreements with these influencers. Within the scope of this study, the positive and negative effects of social media influencers on the fashion industry will be examined, and the attitudes of companies in social media and the power of influencers in the industry will be discussed. The data regarding the phenomena mentioned in the study are limited to the phenomena in Türkiye.
- Open Access
- 1 January 2024
- Published by Journal of Innovative Engineering and Natural Science in Journal of Innovative Engineering and Natural Science
- Vol. 4 (2) , 596-612
3 Katmanlı elyaf takviyeli kompozitlerin balistik analizi
Bu çalışmada, z yönünde bağlayıcı iplikle birlikte 3 katmanlı tasarlanan kompozit levhaların balistik özellikleri, oluşturulan sonlu elemanlar modeli ile sayısal olarak incelenmiştir. Burada bağlayıcı z-ipliklerin kompozit levhaların balistik özelliklerine katkıları incelenmiştir. Kompozit levhalar tasarlanırken epoksi reçine matris malzemesi olarak belirlenmiş, takviye malzemesi olarak karbon ve aramid elyaflar kullanılmıştır. Levhalar 3 katmanlı olacak şekilde ve bağlayıcı iplik bulunması/bulunmaması durumu ile 4 farklı levha şeklinde MSC Digimat programında tasarlanmıştır. MSC Digimat programında bez ayağı kumaş örgü modeli ile tasarlanan 3 boyutlu kompozit levhaların mekanik özellikleri program üzerinden alınarak sonlu elemanlar analizlerinde malzeme modeli olarak kullanılmıştır. ABAQUS programında VUMAT alt programı kullanılarak oluşturulan kompozit malzeme modelleri levhalara tanımlanmıştır. Balistik bir analiz yapabilmek adına mermi çekirdeği modeli için Parabellum 9x19 mm fişek tercih edilmiştir. Analizlerde mermi modeli rijit cisim olarak tasarlanmış olup merminin levhaya çarpmadan önceki ilk hızı ve çarptıktan sonraki son hızlarının karşılaştırması nümerik olarak yapılmıştır. NIJ 0108.01 standardı test prosedürüne göre ABAQUS programında Dinamik/Eksplisit olarak çözdürülen sonlu elemanlar analizleri sonucunda merminin ilk ve son hızı, merminin kinetik enerjisi, levhaların absorbe ettiği enerji ve mermi çekirdeğinin levhaya temas ettiği bölgedeki deplasmanlar nümerik olarak incelenmiştir. Karşılaştırmalı olarak sunulan simülasyon sonuçları doğrultusunda 3 katmanlı kompozit levhaların mermiyi yavaşlattığı ancak durduramadığı görülmesine rağmen bağlayıcı z-ipliklerin levhaların performanslarına bazı olumlu etkilerinin olduğu ortaya çıkmıştır.
- 1 January 2024
- Published by Journal of Innovative Engineering and Natural Science in Journal of Innovative Engineering and Natural Science
- Vol. 4 (2) , 596-612
Open Access3 Katmanlı elyaf takviyeli kompozitlerin balistik analizi
Bu çalışmada, z yönünde bağlayıcı iplikle birlikte 3 katmanlı tasarlanan kompozit levhaların balistik özellikleri, oluşturulan sonlu elemanlar modeli ile sayısal olarak incelenmiştir. Burada bağlayıcı z-ipliklerin kompozit levhaların balistik özelliklerine katkıları incelenmiştir. Kompozit levhalar tasarlanırken epoksi reçine matris malzemesi olarak belirlenmiş, takviye malzemesi olarak karbon ve aramid elyaflar kullanılmıştır. Levhalar 3 katmanlı olacak şekilde ve bağlayıcı iplik bulunması/bulunmaması durumu ile 4 farklı levha şeklinde MSC Digimat programında tasarlanmıştır. MSC Digimat programında bez ayağı kumaş örgü modeli ile tasarlanan 3 boyutlu kompozit levhaların mekanik özellikleri program üzerinden alınarak sonlu elemanlar analizlerinde malzeme modeli olarak kullanılmıştır. ABAQUS programında VUMAT alt programı kullanılarak oluşturulan kompozit malzeme modelleri levhalara tanımlanmıştır. Balistik bir analiz yapabilmek adına mermi çekirdeği modeli için Parabellum 9x19 mm fişek tercih edilmiştir. Analizlerde mermi modeli rijit cisim olarak tasarlanmış olup merminin levhaya çarpmadan önceki ilk hızı ve çarptıktan sonraki son hızlarının karşılaştırması nümerik olarak yapılmıştır. NIJ 0108.01 standardı test prosedürüne göre ABAQUS programında Dinamik/Eksplisit olarak çözdürülen sonlu elemanlar analizleri sonucunda merminin ilk ve son hızı, merminin kinetik enerjisi, levhaların absorbe ettiği enerji ve mermi çekirdeğinin levhaya temas ettiği bölgedeki deplasmanlar nümerik olarak incelenmiştir. Karşılaştırmalı olarak sunulan simülasyon sonuçları doğrultusunda 3 katmanlı kompozit levhaların mermiyi yavaşlattığı ancak durduramadığı görülmesine rağmen bağlayıcı z-ipliklerin levhaların performanslarına bazı olumlu etkilerinin olduğu ortaya çıkmıştır.
- Open Access
- 28 July 2023
- Published by Cukurova Universitesi Muhendislik-Mimarlik Fakultesi Dergisi in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
- Vol. 38 (2) , 495-506
Analysing The Effects of Knitted Fabrics Physical Properties to The Heating of Sewing Machine Needles
Due to the increasing demand in the clothing industry, industrial sewing machines operate at high speeds ranging from 2000 to 3000 revolutions per minute. One of the most significant problems that adversely affect the stitching quality and efficiency is the needle temperature, which reaches up to 300 oC and is influenced by various parameters such as machine speed, thread tension, and fabric properties. In this study, the heat generated from the friction between the needle and the textile surface in knitted fabrics and the fabric properties affecting heat are examined. Four different knitting techniques and twelve different knitted fabrics with varying weights, thicknesses, and blend properties were used. An Optris CT3M pyrometer was employed to measure the temperature on the needle. The results can be summarized as follows: in all knitted fabrics, an increase in fabric weight and thickness was observed to correspond to an increase in needle temperature values. The highest needle temperature values above 90 oC were obtained in TF2-coded three-thread fleece fabric with a fabric thickness of 1.31 mm and a fabric weight of 340 g/m2, while the lowest needle temperatures of 66 oC and below were achieved in the lightest and thinnest fabric with a fabric weight of 100 g/m2 and a thickness of 0.39 mm. Additionally, no significant relationship was found between fabric stitching density and needle temperature.
- 28 July 2023
- Published by Cukurova Universitesi Muhendislik-Mimarlik Fakultesi Dergisi in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
- Vol. 38 (2) , 495-506
Open AccessAnalysing The Effects of Knitted Fabrics Physical Properties to The Heating of Sewing Machine Needles
Due to the increasing demand in the clothing industry, industrial sewing machines operate at high speeds ranging from 2000 to 3000 revolutions per minute. One of the most significant problems that adversely affect the stitching quality and efficiency is the needle temperature, which reaches up to 300 oC and is influenced by various parameters such as machine speed, thread tension, and fabric properties. In this study, the heat generated from the friction between the needle and the textile surface in knitted fabrics and the fabric properties affecting heat are examined. Four different knitting techniques and twelve different knitted fabrics with varying weights, thicknesses, and blend properties were used. An Optris CT3M pyrometer was employed to measure the temperature on the needle. The results can be summarized as follows: in all knitted fabrics, an increase in fabric weight and thickness was observed to correspond to an increase in needle temperature values. The highest needle temperature values above 90 oC were obtained in TF2-coded three-thread fleece fabric with a fabric thickness of 1.31 mm and a fabric weight of 340 g/m2, while the lowest needle temperatures of 66 oC and below were achieved in the lightest and thinnest fabric with a fabric weight of 100 g/m2 and a thickness of 0.39 mm. Additionally, no significant relationship was found between fabric stitching density and needle temperature.
- Open Access
- 25 June 2023
- Published by Özgür Yayınları
- p. 1-11
Elyaf Takviyeli Kompozitlerde Yeniden İşlenebilir Termosetler: Vitrimerler
Malzeme; mühendislik, mimarlık, sanatsal çalışmalar ve tasarım alanlarında ürünü oluşturan ve fikrin gerçekleşmesine aracılık eden nesne olarak tanımlanabilir. Dolayısıyla malzeme, fayda üretmek amacıyla yürütülen faaliyetler sonucunda oluşan ürünün ham maddesi olarak da değerlendirilebilir. Malzemeler genel olarak metaller, seramikler ve organik malzemeler (plastikler) olmak üzere üç ana gruba ayrılır. Bu malzemeler arasında plastikler sahip oldukları özellikler nedeniyle en önemli malzemelerden biri olarak kabul edilmektedir. Plastikler, genellikle ısı ve basınç uygulandığında kalıplanabilen veya şekillendirilebilen polimerik malzemelerdir. Genel olarak plastikler, kimyasal yapılarındaki farklılıklara göre termoplastikler ve termosetler olarak ikiye ayrılır. Termoplastikler kolayca eritilebilir ve yüksek sıcaklıklarda yeniden işlenebilir. Termosetlerin ise geri dönüşüm olanakları, kürlenme sürecinde oluşan geri dönüşü olmayan kimyasal bağlar nedeniyle sınırlıdır. Bu dezavantaj, sürdürülebilir yaklaşımların gelişmesiyle birlikte kompozit malzemelerin daha da geliştirilmesi için tetikleyici olmuştur. Termosetlerin mekanik esnekliğini "camın" yüksek sıcaklıklarda yeniden işlenebilirliği ile birleştiren vitrimer malzemeler, geri dönüştürülemeyen termoset kompozitlere çok umut verici bir alternatif gibi görünmektedir. Vitrimerler, polimer sınıfı için nispeten yeni bir terimdir. Vitrimer, termoplastik ve termoset malzemelerin avantajlarını birleştiren yeni bir malzeme türüdür.
- 25 June 2023
- Published by Özgür Yayınları
- p. 1-11
Open AccessElyaf Takviyeli Kompozitlerde Yeniden İşlenebilir Termosetler: Vitrimerler
Malzeme; mühendislik, mimarlık, sanatsal çalışmalar ve tasarım alanlarında ürünü oluşturan ve fikrin gerçekleşmesine aracılık eden nesne olarak tanımlanabilir. Dolayısıyla malzeme, fayda üretmek amacıyla yürütülen faaliyetler sonucunda oluşan ürünün ham maddesi olarak da değerlendirilebilir. Malzemeler genel olarak metaller, seramikler ve organik malzemeler (plastikler) olmak üzere üç ana gruba ayrılır. Bu malzemeler arasında plastikler sahip oldukları özellikler nedeniyle en önemli malzemelerden biri olarak kabul edilmektedir. Plastikler, genellikle ısı ve basınç uygulandığında kalıplanabilen veya şekillendirilebilen polimerik malzemelerdir. Genel olarak plastikler, kimyasal yapılarındaki farklılıklara göre termoplastikler ve termosetler olarak ikiye ayrılır. Termoplastikler kolayca eritilebilir ve yüksek sıcaklıklarda yeniden işlenebilir. Termosetlerin ise geri dönüşüm olanakları, kürlenme sürecinde oluşan geri dönüşü olmayan kimyasal bağlar nedeniyle sınırlıdır. Bu dezavantaj, sürdürülebilir yaklaşımların gelişmesiyle birlikte kompozit malzemelerin daha da geliştirilmesi için tetikleyici olmuştur. Termosetlerin mekanik esnekliğini "camın" yüksek sıcaklıklarda yeniden işlenebilirliği ile birleştiren vitrimer malzemeler, geri dönüştürülemeyen termoset kompozitlere çok umut verici bir alternatif gibi görünmektedir. Vitrimerler, polimer sınıfı için nispeten yeni bir terimdir. Vitrimer, termoplastik ve termoset malzemelerin avantajlarını birleştiren yeni bir malzeme türüdür.
- 7 November 2016
- Published by Emerald Publishing in International Journal of Clothing Science and Technology
- Vol. 28 (6) , 750-779
Heuristic production line balancing problem solution with MATLAB software programming
Purpose: The purpose of this paper is to find the most efficient assembly line balancing solution across many heuristic line balancing methods, in assistance with a developed computer program. Design/methodology/approach: In this paper, assembly line balancing problem was analyzed using t-shirt and knitted pants data. A computer program using MATLAB software for the solution of assembly line balancing problems has been developed. In this study, following heuristic assembly line balancing methods were applied: Hoffman method; position weight method; COMSOAL method; and Kilbridge and Wester method. A MATLAB program has been developed by taking into account of theoretical solution of all these methods. Later the program is developed further by analyzing solutions made manually and is made to verify the developed program. Findings: Pre-studies which were conducted in order to decide which programming language would be the best choice for line balancing methods’ application came out with the result that MATLAB, from between C, C++, C# and Java, would be the best software choice. The main reason for this choice is that MATLAB is a powerful matrix operation software with a powerful user interface designing tool and has the tools to make development program to be used universally in every computer. Originality/value: When the researches were investigated, it is clearly seen that, this study is the first research on using computer program for solving assembly line balancing problem.
- 7 November 2016
- Published by Emerald Publishing in International Journal of Clothing Science and Technology
- Vol. 28 (6) , 750-779
Heuristic production line balancing problem solution with MATLAB software programming
Purpose: The purpose of this paper is to find the most efficient assembly line balancing solution across many heuristic line balancing methods, in assistance with a developed computer program. Design/methodology/approach: In this paper, assembly line balancing problem was analyzed using t-shirt and knitted pants data. A computer program using MATLAB software for the solution of assembly line balancing problems has been developed. In this study, following heuristic assembly line balancing methods were applied: Hoffman method; position weight method; COMSOAL method; and Kilbridge and Wester method. A MATLAB program has been developed by taking into account of theoretical solution of all these methods. Later the program is developed further by analyzing solutions made manually and is made to verify the developed program. Findings: Pre-studies which were conducted in order to decide which programming language would be the best choice for line balancing methods’ application came out with the result that MATLAB, from between C, C++, C# and Java, would be the best software choice. The main reason for this choice is that MATLAB is a powerful matrix operation software with a powerful user interface designing tool and has the tools to make development program to be used universally in every computer. Originality/value: When the researches were investigated, it is clearly seen that, this study is the first research on using computer program for solving assembly line balancing problem.