E. V. Zelinskaya
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
E. V. Zelinskaya has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Alexander Evgenievich Burdonov
Irkutsk National Research Technical University
2 shared publications A. E. Burdonov
1 shared publication- A. Yu. Khamaganova1 shared publication
- Aleksandr Burdonov
Irkutsk National Research Technical University
1 shared publication D. E. Skvortsov
1 shared publicationE. G. Filatova
1 shared publication
Latest Publications
- 10 July 2025
- Published by LLC Gornaya Kniga in Mining informational and analytical bulletin
- Vol. 8
Flotation of low-grade alumina-containing material
- 10 July 2025
- Published by LLC Gornaya Kniga in Mining informational and analytical bulletin
- Vol. 8
Flotation of low-grade alumina-containing material
- 25 December 2024
- Published by Ore and Metals Publishing House in Obogashchenie Rud
- No. 6,p. 25-31
Enhancing the efficiency of hydromineral raw material processing through preliminary precipitation of macrocomponents from brines
Hydromineral resources, such as the underground brines from oil and gas fields, are a promising source for the extraction of strategic metals, particularly lithium, as well as other valuable products like magnesium and calcium salts. To improve the efficiency of selective extraction of valuable components from hydromineral raw materials, this study investigates the potential for reducing the concentration of macrocomponents during the initial stages of the processing workflow. Chemical analysis of brines from various oil and gas fields in the Irkutsk region revealed their high mineralization, driven by the presence of calcium, magnesium, potassium, and sodium chlorides, alongside significant concentrations of microcomponents such as lithium (Li) and strontium (Sr). The phase composition of the raw underground brines, primarily consisting of tachyhydrite and sinjarite, was examined, along with post-precipitation product samples, which contained substantial amounts of strontium chloride hydrate. The study demonstrates the feasibility of separating brine components by transferring the majority of calcium, potassium, and iron into the precipitate. The parameters influencing the precipitation process and their effect on the quality of the resulting products were established. Subsequent sorption extraction of lithium and ion-exchange purification of the primary lithium concentrate enabled the production of a lithium-containing product with minimal impurities, achieving over 86 % lithium recovery. As a result, the concentration of major macrocomponents in the primary lithium concentrate was significantly reduced compared to the original brine: calcium to 0.18 % by weight, potassium to 15 % by weight, magnesium to 0.19 % by weight, and iron (II) to less than 0.02 % by weight.
- 25 December 2024
- Published by Ore and Metals Publishing House in Obogashchenie Rud
- No. 6,p. 25-31
Enhancing the efficiency of hydromineral raw material processing through preliminary precipitation of macrocomponents from brines
Hydromineral resources, such as the underground brines from oil and gas fields, are a promising source for the extraction of strategic metals, particularly lithium, as well as other valuable products like magnesium and calcium salts. To improve the efficiency of selective extraction of valuable components from hydromineral raw materials, this study investigates the potential for reducing the concentration of macrocomponents during the initial stages of the processing workflow. Chemical analysis of brines from various oil and gas fields in the Irkutsk region revealed their high mineralization, driven by the presence of calcium, magnesium, potassium, and sodium chlorides, alongside significant concentrations of microcomponents such as lithium (Li) and strontium (Sr). The phase composition of the raw underground brines, primarily consisting of tachyhydrite and sinjarite, was examined, along with post-precipitation product samples, which contained substantial amounts of strontium chloride hydrate. The study demonstrates the feasibility of separating brine components by transferring the majority of calcium, potassium, and iron into the precipitate. The parameters influencing the precipitation process and their effect on the quality of the resulting products were established. Subsequent sorption extraction of lithium and ion-exchange purification of the primary lithium concentrate enabled the production of a lithium-containing product with minimal impurities, achieving over 86 % lithium recovery. As a result, the concentration of major macrocomponents in the primary lithium concentrate was significantly reduced compared to the original brine: calcium to 0.18 % by weight, potassium to 15 % by weight, magnesium to 0.19 % by weight, and iron (II) to less than 0.02 % by weight.
- 29 February 2024
- Published by Ore and Metals Publishing House in Obogashchenie Rud
- No. 1,p. 10-15
Study of processes for the recovery of lithium ions from extremely saturated formation brines
The subsoil of the Irkutsk region is a source of highly mineralized waters (brines) containing a significant amount of lithium ions (up to 490 mg/dm3), rubidium (up to 11 mg/dm3), strontium (up to 4300 mg/dm3), bromine (up to 8200 mg/dm3), and other valuable components. This work examines the process of sorption recovery of lithium ions from extremely saturated formation brines. It also studies the effects of such factors as pH, concentration, temperature, and liquid-to-solid ratio (L : S) in the sorption–desorption cycles on the recovery process. Alkalinization of a natural brine to pH = 6–6.6 improves lithium sorption by 60 %. At higher temperatures, the exchange capacity decreases, which confirms the exothermic nature of the process under study. A reduction in the volume of the liquid phase during desorption leads to a higher concentration of lithium ions in the eluate. With a ratio of L : S = 25 : 1, lithium concentration in the eluate is 99.1 mg/dm3 and the degree of desorption is 72.5 %. At 100 : 1, the lithium concentration is 34.2 mg/dm3 and the degree of desorption is 100 %. It has been experimentally confirmed that a degree of desorption approaching 100 % is required to enable multiple repetitions of sorption–desorption cycles. Lower desorption degrees result in lower lithium concentrations in the sorbent with each cycle, preventing any repeated use of the sorbent. The results presented may be useful for specialists in the field of hydromineral raw materials processing when planning new research within the framework of national programs for the development of mineral resources.The work was carried out with the support of the Ministry of Science and Higher Education of the Russian Federation within the framework of the State Assignment to Universities program (FZZS-2023-0004).
- 29 February 2024
- Published by Ore and Metals Publishing House in Obogashchenie Rud
- No. 1,p. 10-15
Study of processes for the recovery of lithium ions from extremely saturated formation brines
The subsoil of the Irkutsk region is a source of highly mineralized waters (brines) containing a significant amount of lithium ions (up to 490 mg/dm3), rubidium (up to 11 mg/dm3), strontium (up to 4300 mg/dm3), bromine (up to 8200 mg/dm3), and other valuable components. This work examines the process of sorption recovery of lithium ions from extremely saturated formation brines. It also studies the effects of such factors as pH, concentration, temperature, and liquid-to-solid ratio (L : S) in the sorption–desorption cycles on the recovery process. Alkalinization of a natural brine to pH = 6–6.6 improves lithium sorption by 60 %. At higher temperatures, the exchange capacity decreases, which confirms the exothermic nature of the process under study. A reduction in the volume of the liquid phase during desorption leads to a higher concentration of lithium ions in the eluate. With a ratio of L : S = 25 : 1, lithium concentration in the eluate is 99.1 mg/dm3 and the degree of desorption is 72.5 %. At 100 : 1, the lithium concentration is 34.2 mg/dm3 and the degree of desorption is 100 %. It has been experimentally confirmed that a degree of desorption approaching 100 % is required to enable multiple repetitions of sorption–desorption cycles. Lower desorption degrees result in lower lithium concentrations in the sorbent with each cycle, preventing any repeated use of the sorbent. The results presented may be useful for specialists in the field of hydromineral raw materials processing when planning new research within the framework of national programs for the development of mineral resources.The work was carried out with the support of the Ministry of Science and Higher Education of the Russian Federation within the framework of the State Assignment to Universities program (FZZS-2023-0004).
- 30 August 2022
- Published by Ore and Metals Publishing House in Tsvetnye Metally
- p. 15-22
Recycling of alumina-containing sweepings for use in primary aluminium production
- 30 August 2022
- Published by Ore and Metals Publishing House in Tsvetnye Metally
- p. 15-22
Recycling of alumina-containing sweepings for use in primary aluminium production
- Open Access
- 13 June 2021
- Published by National University of Science and Technology MISiS in Izvestiya Vuzov. Tsvetnaya Metallurgiya (Proceedings of Higher Schools. Nonferrous Metallurgy)
- No. 3,p. 73-84
Purification of alumina-containing sweepings by dry air classification methods
Рассмотрены вопросы образования и переработки отходов на предприятиях алюминиевого производства. На основе анализа литературных источников и практических данных определены причины образования металлургических отходов на территории РФ. Проанализированы исследования, ведущиеся в научных организациях. Установлено, что для переработки отходов перспективен глиноземсодержащий смет, образующийся в процессе производства алюминиевого сырца на электролизерах с самообжигающимися анодами при различных технологических операциях. Глиноземсодержащий смет представляет собой отходы сложного переменного состава, сметаемые в цехах электролиза. Выявлено что глиноземсодержащий смет состоит из криолита (Na3AlF6), хиолита (Al3F14Na5), корунда (Al2O3), сидерита (FeCo3), пирита (FeS2), кварца (SiO2), полевого шпата ((Ca, Na)(Al, Si) AlSi2O8), углеродистого вещества и техногенной фазы состава (NaF)•1,5CaF2•AlF3. Интерес к их переработке состоит в том, что в них содержится значительное количество ценных компонентов (Na3AlF6, Al2O3, AlF3), извлечение которых и повторное использование в получении алюминия могут способствовать снижению себестоимости единицы продукции. Проблемой является наличие в смете компонентов (SiO2, Fe2O3), которые при попадании в электролит оказывают негативное влияние на процесс электролиза. Результаты изучения химического состава монофракций позволили сделать вывод, что исключение темной (серовато-черной) массы, в которой содержание примесей (SiO2, Fe2O3) максимально, позволит в значительной степени решить поставленную задачу исследования. На основании выдвинутой гипотезы представлены результаты проведения воздушной классификации смета фракций 0—10 и 0—5 мм в каскадно-гравитационном (КГ) и центробежном (КЦ) классификаторах. По результатам выполненных исследований рекомендуется применять в схеме обогащения глиноземсодержащего смета алюминиевого производства воздушную классификацию в КГ смета фракции 0—10 мм.
- 13 June 2021
- Published by National University of Science and Technology MISiS in Izvestiya Vuzov. Tsvetnaya Metallurgiya (Proceedings of Higher Schools. Nonferrous Metallurgy)
- No. 3,p. 73-84
Open AccessPurification of alumina-containing sweepings by dry air classification methods
Рассмотрены вопросы образования и переработки отходов на предприятиях алюминиевого производства. На основе анализа литературных источников и практических данных определены причины образования металлургических отходов на территории РФ. Проанализированы исследования, ведущиеся в научных организациях. Установлено, что для переработки отходов перспективен глиноземсодержащий смет, образующийся в процессе производства алюминиевого сырца на электролизерах с самообжигающимися анодами при различных технологических операциях. Глиноземсодержащий смет представляет собой отходы сложного переменного состава, сметаемые в цехах электролиза. Выявлено что глиноземсодержащий смет состоит из криолита (Na3AlF6), хиолита (Al3F14Na5), корунда (Al2O3), сидерита (FeCo3), пирита (FeS2), кварца (SiO2), полевого шпата ((Ca, Na)(Al, Si) AlSi2O8), углеродистого вещества и техногенной фазы состава (NaF)•1,5CaF2•AlF3. Интерес к их переработке состоит в том, что в них содержится значительное количество ценных компонентов (Na3AlF6, Al2O3, AlF3), извлечение которых и повторное использование в получении алюминия могут способствовать снижению себестоимости единицы продукции. Проблемой является наличие в смете компонентов (SiO2, Fe2O3), которые при попадании в электролит оказывают негативное влияние на процесс электролиза. Результаты изучения химического состава монофракций позволили сделать вывод, что исключение темной (серовато-черной) массы, в которой содержание примесей (SiO2, Fe2O3) максимально, позволит в значительной степени решить поставленную задачу исследования. На основании выдвинутой гипотезы представлены результаты проведения воздушной классификации смета фракций 0—10 и 0—5 мм в каскадно-гравитационном (КГ) и центробежном (КЦ) классификаторах. По результатам выполненных исследований рекомендуется применять в схеме обогащения глиноземсодержащего смета алюминиевого производства воздушную классификацию в КГ смета фракции 0—10 мм.
- 20 December 2019
- Published by Ore and Metals Publishing House in Obogashchenie Rud
- p. 59-62
Problems and prospects of effective processing of mineral raw materials in the 21st century (Plaksin Readings-2019)
The forty-third annual Plaksin Readings Conference was held in Irkutsk on September 9–14, 2019. The event was visited by 164 specialists from 41 organizations, including 18 universities, academic and industrial institutes, and 23 large mining and metallurgical companies. The meeting was attended by researchers from Russia, South Africa, France, Germany, Mongolia, Kazakhstan, Ukraine, and Uzbekistan. The topics discussed at the Plaksin Readings-2019 were due to the growing demand for effective technologies for the mining and processing of mineral raw materials, which would reduce the loss of valuable components and ensure more comprehensive processing of subsoil resources. It was noted at the meeting that the current degree of theoretical elaboration and substantiation of respective process solutions in the field of mineral processing allows solving the problems of processing refractory and complex, including technogenic, raw materials. It is deemed expedient to focus the research conducted by the leading organizations in the field of mineral processing in the priority areas of designing innovative processes for the recovery of fine micro- and nanoparticles of non-ferrous, noble and rareearth metals from refractory and unconventional mineral raw materials based on a combination of effective processing methods, hydrometallurgical approaches, physicochemical and energy impacts. The meeting materials were published in the collection titled «Problems and prospects of effective processing of mineral raw materials in the 21st century». Plaksin Readings-2020 will be held in Apatity.
- 20 December 2019
- Published by Ore and Metals Publishing House in Obogashchenie Rud
- p. 59-62
Problems and prospects of effective processing of mineral raw materials in the 21st century (Plaksin Readings-2019)
The forty-third annual Plaksin Readings Conference was held in Irkutsk on September 9–14, 2019. The event was visited by 164 specialists from 41 organizations, including 18 universities, academic and industrial institutes, and 23 large mining and metallurgical companies. The meeting was attended by researchers from Russia, South Africa, France, Germany, Mongolia, Kazakhstan, Ukraine, and Uzbekistan. The topics discussed at the Plaksin Readings-2019 were due to the growing demand for effective technologies for the mining and processing of mineral raw materials, which would reduce the loss of valuable components and ensure more comprehensive processing of subsoil resources. It was noted at the meeting that the current degree of theoretical elaboration and substantiation of respective process solutions in the field of mineral processing allows solving the problems of processing refractory and complex, including technogenic, raw materials. It is deemed expedient to focus the research conducted by the leading organizations in the field of mineral processing in the priority areas of designing innovative processes for the recovery of fine micro- and nanoparticles of non-ferrous, noble and rareearth metals from refractory and unconventional mineral raw materials based on a combination of effective processing methods, hydrometallurgical approaches, physicochemical and energy impacts. The meeting materials were published in the collection titled «Problems and prospects of effective processing of mineral raw materials in the 21st century». Plaksin Readings-2020 will be held in Apatity.
- 15 December 2016
- Published by Ore and Metals Publishing House in Obogashchenie Rud
- p. 44-50
The Dzhidinsky tungsten-and-molybdenum mining and concentration complex dump tailings processing with a view to produce gold-containing marketable product
The purpose of the work is to increase efficiency of additional recovery of gold from gold-containing concentrates, produced from man-induced material, using a complex of beneficiation and metallurgical methods. The concentrate production circuit provides for gravity preconcentration of material of –1 mm size and beneficiation of gravity concentrate, ground to –0.5 mm size, in centrifugal separators KC-CVD (Nelson concentrator) with continuous material discharge in two consecutive stages. The primary gravity concentrate by 70 % consists of sulfide minerals with density, comparable to that of tungsten-containing minerals. Sulfides are removed by flotation method in XJQ-40 mechanical cells. Tungsten-containing product final concentration stage, following sulfide flotation, is accomplished through gravity-flotation circuit. This product final finishing concentration is performed on electromagnetic separator DCH-0.6. Tungsten-containing product dewatering is performed in two stages: thickening in lamellar thickener P-1; thickener sands filtration in press filters XAZ-20. The hydrometallurgical processing flow sheet includes desliming, mixing with solution of reagents and cyanidation with continuous circulation of solutions. Gold recovery into solution in cyanidation is 98.34 %. Upon completion of leaching, pregnant solutions are pumped to electrolysis, gold recovery into cathode deposit is 96.2 %. Solid residue (cake) is washed, rendered harmless and dumped to tailings storage facility. In order to decrease environmental impact, special methods are developed with a view to render harmless cyanidation tailings and atmospheric emissions.
- 15 December 2016
- Published by Ore and Metals Publishing House in Obogashchenie Rud
- p. 44-50
The Dzhidinsky tungsten-and-molybdenum mining and concentration complex dump tailings processing with a view to produce gold-containing marketable product
The purpose of the work is to increase efficiency of additional recovery of gold from gold-containing concentrates, produced from man-induced material, using a complex of beneficiation and metallurgical methods. The concentrate production circuit provides for gravity preconcentration of material of –1 mm size and beneficiation of gravity concentrate, ground to –0.5 mm size, in centrifugal separators KC-CVD (Nelson concentrator) with continuous material discharge in two consecutive stages. The primary gravity concentrate by 70 % consists of sulfide minerals with density, comparable to that of tungsten-containing minerals. Sulfides are removed by flotation method in XJQ-40 mechanical cells. Tungsten-containing product final concentration stage, following sulfide flotation, is accomplished through gravity-flotation circuit. This product final finishing concentration is performed on electromagnetic separator DCH-0.6. Tungsten-containing product dewatering is performed in two stages: thickening in lamellar thickener P-1; thickener sands filtration in press filters XAZ-20. The hydrometallurgical processing flow sheet includes desliming, mixing with solution of reagents and cyanidation with continuous circulation of solutions. Gold recovery into solution in cyanidation is 98.34 %. Upon completion of leaching, pregnant solutions are pumped to electrolysis, gold recovery into cathode deposit is 96.2 %. Solid residue (cake) is washed, rendered harmless and dumped to tailings storage facility. In order to decrease environmental impact, special methods are developed with a view to render harmless cyanidation tailings and atmospheric emissions.