Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Abdellah Douadi has a total of 56 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Integrated mechanical and environmental assessment of concrete with EAF slag coarse aggregate

    by Jacqueline Saliba, Anwar Hamrouni, Abdellah Douadi, Ali Makhlouf

  • Response Surface Methodology and Life Cycle Assessment of self-compacting mortars incorporating olive pomace bottom ash

    by Abderraouf Messai, Nour El Houda Khitas, Cherif Belebchouche, Walid Deboucha, Ali Makhlouf, Mourad Boutlikht, Kamel Hebbache, Laura Moretti, Abdellah Douadi

    1. Development in global infrastructure and economic activity is related centrally to the construction industry. However, the latter is criticised for its environmental footprint, which has been in...

  • Enhancing geopolymer mortars: The impact of Algerian metakaolin substitution on mechanical performance and sustainability

    by Kamel Hebbache, Abdellah Douadi̇, Oualid Mahieddine Hamdi̇, Mourad Boutli̇kHt, Abderraouf Messai̇, Nour El Houda Khi̇tAs, Cherif Belebchouche

    Geopolymer binder has been received as sustainable substitute for the Portland cement that ensures lower carbon footprint and higher durability properties. This study focuses on the influence of metakaolin (MK) replacement in Benisaf natural pozzolan (BNP)-based mortars on the rheological and mechanical properties of these latter. The objective is to optimize the metakaolin content for improved mechanical performance while keeping suitable workability. Sodium silicate (Na₂SiO₃) and sodium hydroxide (NaOH) were used as activating solutions to synthesize geopolymer mortars, where MK replaced BNP with five different ratios of 10%, 20%, 30%, 40% and 50%. X-ray diffraction (XRD), X-ray fluorescence (XRF), Scanning electron microscopy-energy dispersive X-ray (SEM-EDX) and particle size analysis were used for characterizing the raw materials. The tests focused on flowability in fresh state, and compressive strength (CS) at 14 and 28 days. The outcomes show that increasing MK quantity results in a reduction in workability, since its particle size is finer and its reactivity is higher, consequently the viscosity is higher and the fluidity is lower. As a result, compressive strength was increased considerably, with a maximum value of 24 MPa at 40% metakaolin substitution (150% higher than control geopolymer mortar). This improvement is due to increased availability of aluminosilicate, which allows a denser gel formation as well as a more favorable polycondensation. Over 40% of MK content resulted in incomplete dissolution and decreased strength. A quantitative evaluation of MK-BNP geopolymer interactions is presented, high-lighting that 40% MK replacement can provide an optimal workability- strength equilibrium. This work aids the formulation of sustainable geopolymer mortars suitable for construction. Complementary investigations should emphasize practicability through large-scale applications, and durability and thermal stability as well.

  • Open Access

    Buckling and Free Vibration of Plates Resting on Elastic Foundation Using a New Strain Based Finite Element

    by Asma Hamzaoui, Abderraouf Messai, Lahcene Fortas, Abdellah Douadi, Kamel Hebbache, Mourad Boutlikht, Cherif Belebchouche, Tarek Merzouki

  • Open Access

    From waste to resource: predictive modeling and environmental assessment of rubber–plastic substituted self-compacting concrete

    by Oualid Mahieddine Hamdi, Abdellah Douadi, Mourad Boutlikht, Ali Makhlouf, Yacine Benguerba, Jacqueline Saliba, Taher A. Tawfik, Walid Maherzi

    This study investigates the combined use of Recycled Rubber (RR) and Recycled Plastic (RP) as hybrid sand replacements in Self-Compacting Concrete (SCC) and develops an integrated formulation and prediction framework based on Response Surface Methodology (RSM) and Artificial Neural Network (ANN) modeling, validated using k-fold cross-validation. Experimental results indicate that increasing RR content generally reduces workability at high substitution levels; however, moderate RR incorporation (10–20%) led to localized improvements in slump flow and passing ability under optimized mixture-design conditions. In contrast, RP substitution resulted in a milder and more stable reduction in workability across the investigated range. Segregation resistance was enhanced by RP incorporation, with sieve stability improvements of up to 7%, whereas RR addition caused a stability reduction of approximately 8–10%. Compressive Strength (CS) at 28 days decreased markedly with RR content, reaching reductions of 25–30% at 30% replacement, compared with a more moderate 10–15% decrease for RP, highlighting the distinct mechanical roles of the two waste materials. Life Cycle Assessment (LCA) revealed that both substitutions significantly mitigated environmental impacts, with reductions in Climate Change (CC) potential of up to 18%, non-renewable energy demand by 12%, and Human Toxicity (HT) impacts by approximately 15% at higher replacement levels under the adopted system expansion approach. Statistical analysis confirmed the robustness of predictive models (ANOVA, p < 0.01). Comparative modeling demonstrated that ANN consistently outperformed RSM, achieving higher predictive accuracy (R 2 up to 0.99 for fresh and mechanical properties and 0.98 for environmental indicators).

  • Open Access

    Integrated Life Cycle Environmental Impact and Mechanical Durability-Related Assessment of Sustainable Pozzolanic Mortars

    by Ali Makhlouf, Abdellah Douadi, Eyad Alsuhaibani, Kamel Hebbache, Mourad Boutlikht, Cherif Belebchouche, Laura Moretti

    The cement industry is a major contributor to global energy consumption and greenhouse gas emissions, motivating the development of sustainable cementitious materials through partial cement substitution. This study investigates the combined mechanical, durability-related, and environmental performance of mortars incorporating a 20% replacement of Portland cement by volume with different natural and waste-derived mineral additions, including natural pozzolan, brick waste, glass powder, recycled concrete powder, and calcined clay as pozzolanic or potentially reactive supplementary materials, while silica sand was used as an inert mineral filler. Mechanical performance was evaluated through compressive strength, while durability-related behavior was assessed using water absorption by immersion at 28 days. In parallel, a Life Cycle Assessment (LCA) was conducted to quantify the environmental impacts associated with climate change, acidification, eutrophication, photochemical oxidant formation, material resource depletion, and non-renewable energy consumption. The results show that mortars incorporating natural pozzolan and brick waste achieved compressive strengths comparable to the reference mortar, while maintaining low water absorption values, indicating effective microstructural densification. Glass powder also provided acceptable mechanical and durability-related performances, whereas silica sand, recycled concrete powder, and calcined clay exhibited reduced strength and increased absorption due to dilution effects, inherited porosity, or delayed pozzolanic activity. From an environmental perspective, all cement-substituted mortars demonstrated significant reductions across all assessed LCA impact categories, with decreases typically ranging from 15% to 20% relative to the reference mix. The most pronounced environmental benefits were observed for mortars incorporating waste-derived materials, particularly brick waste. Overall, the combined mechanical and environmental assessment demonstrates that a 20% cement substitution using supplementary materials can substantially reduce the environmental footprint of mortars without compromising essential engineering properties.


  • Open Access

    Data-Driven Settlement Prediction for Pavements on Tunis Soft Clay Improved with Deep Soil Mixing: Artificial Intelligence and Response Surface Approaches

    by Abderrahim Meguellati, Seifeddine Tabchouche, Yasser Altowaijri, Yazeed A. Alsharedah, Abdelghani Merdas, Abdellah Douadi

    This study investigates the prediction of immediate settlement (Uz) in soft clay improved with Deep Soil Mixing (DSM) columns under heavy aircraft loading. Two key design parameters were considered: column spacing (2.25 m to 3.75 m) and column length (6 m to 20 m), with both rectangular and triangular arrangements analyzed. The datasets obtained from numerical simulations were modeled using Response Surface Methodology (RSM) and Artificial Neural Networks (ANN), with model calibration and validation performed through k-fold cross-validation. The statistical analysis revealed that both approaches achieved excellent predictive capability, with R2 values exceeding 0.999. For the rectangular arrangement, RSM yielded slightly lower errors (RMSE = 0.0636 cm, MAE = 0.0553 cm) compared to ANN (RMSE = 0.0828 cm, MAE = 0.0682 cm), suggesting that a second-order polynomial approximation can effectively describe the settlement response in this configuration. Conversely, for the triangular arrangement, ANN clearly outperformed RSM, reducing RMSE from 0.0725 cm to 0.0265 cm and MAE from 0.0615 cm to 0.0111 cm, thereby capturing the nonlinear stress redistribution associated with isotropic column layouts more effectively. Observed–predicted plots confirmed the high predictive accuracy of both methods, with ANN showing superior generalization in triangular grids. Overall, the findings highlight that RSM remains a robust and computationally efficient tool for rectangular layouts with relatively linear responses. In contrast, ANN provides enhanced accuracy for triangular configurations where nonlinear interactions dominate, making it particularly suitable for DSM design optimization in airport pavement foundations.


  • Mechanical Properties of Sustainable Concrete Incorporating Steel-Binding Wire Wastes

    by Nadjoua Bourmatte, Mourad Boutlikht, Abdellah Douadi, Abderraouf Messai, Bouthaina Lamiri, Cherif Belebchouche, Kamel Hebbache

    Incorporating steel binding wire waste into concrete offers a sustainable solution that aligns with green construction practices. This study aims to explore the feasibility of using untreated steel binding wire (SBW) waste as a material in concrete production. This research examines the mechanical properties of concrete containing SBW as a partial replacement for sand to improve the concrete’s structural performance by addressing its inherent weakness in tension. Two different shapes of SBW (powder and fiber) and three ratios of replacement of sand by SBW (10%, 15%, and 20%) were considered. The obtained results demonstrate that incorporating SBW wastes enhances the fresh concrete workability. The increasement ranged from 15% to 35% for powder and fiber of SBW, respectively compared to the ordinary concrete (OC). When fiber SBW is added, the concrete density increases from 3.62% to 5.9% for 10% and 20% of SBW, respectively compared to OC. Whereas for powder SBW incorporation, it decreases from 1.7% to 0.37% for 10% and 20%, respectively. The addition of SBW fiber improves compressive strength (CS), which increases as the replacement ratio increases by 73% and 104%, for replacement ratios of 10% and 20%, respectively. However, a low ratio of SBW powder increases the compressive strength by 49%, while higher ratio results in a decrease in CS and the gain drops to 2%. Both SBW fiber and powder addition concrete demonstrate similar behavior in tensile strength (TS) as observed in compression. The study concludes that adding up to 20% SBW fiber and less than 10% SBW powder significantly enhances the mechanical properties of concrete, providing a practical method for waste utilization and material performance improvement.

  • Open Access

    Synergistic Optimization of Mortar Performance and Carbon Footprint Reduction Using Quarry Wastes and Natural Pozzolana: A Statistical and Experimental Study

    by Abdellah Douadi, Ali Makhlouf, Cherif Belebchouche, Kamel Hebbache, Mourad Boutlikht, Laura Moretti, Paulina Faria, Hammoudi Abderazek, Sławomir Czarnecki, Adrian Chajec

    The construction industry increasingly integrates technological advancements to enhance efficiency and meet technical, environmental, and economic requirements. Self-compacting mortars are gaining popularity due to their superior fluidity, optimized compaction, and improved mechanical properties. This study explores the potential of statistical mix design methodology to optimize self-compacting mortars’ fresh properties and strength development by replacing up to 20% of cement with pozzolana, limestone, and marble powder. A self-compacting mortar repository was used to develop robust models predicting slump flow, compressive strength at 28 days, water absorption, and capillary absorption. Results indicate that marble powder mixtures exhibit superior slump flow, up to 9% higher than other formulations. Compressive strengths range from 50 MPa to 70 MPa. Pozzolana and marble-based mortars show 15% and 12% strength reductions compared to the limestone-based mix, respectively. Water absorption increases slightly for mortars with marble (+2%) or pozzolana (+3%). The mortar containing marble powder has the lowest sorptivity coefficient due to its high specific surface area. The statistical analysis was conducted using a mixture design approach based on a second-order polynomial regression model. ANOVA results for the studied responses indicate that the calculated F-values exceed the critical thresholds, with p-values below 0.05 and R-squared values above 0.83, confirming the robustness and predictive reliability of the developed models. Life cycle assessment reveals that cement production accounts for over 80% of the environmental impact. Partial replacement with pozzolana, limestone, and marble powder reduces up to 19% of greenhouse gas emissions and 17.22% in non-renewable energy consumption, demonstrating the environmental benefits of optimized formulations.


  • Open Access

    The Impact of Confinement Configurations on the Compressive Behavior of CFRP—Wrapped Concrete Cylinders

    by Riad Babba, Abdellah Douadi, Eyad Alsuhaibani, Laura Moretti, Abdelghani Merdas, Saci Dahmani, Mourad Boutlikht

    Experimental tests on confined concrete specimens are essential to characterize the mechanisms activated under varying degrees of confinement. Such characterization is critical for understanding how full, partial, and non-uniform wrapping configurations influence strength and ductility enhancements. This study investigates the compressive behavior of concrete cylinders (160 mm × 320 mm) confined using full, partial, and non-uniform carbon fiber-reinforced polymers (CFRP) configurations. In the first phase, all wrapping schemes were applied with equivalent quantities of CFRP, enabling a direct performance comparison under material parity. The results indicate that non-uniform confinement (NUC) achieved approximately 15% higher axial strength than full confinement (FC2) using the same amount of CFRP. In the second phase, the NUC configuration was tested with 25% less CFRP material, yet the reduction in strength was limited to about 3%, demonstrating its superior efficiency. A new predictive model was developed to estimate peak axial stress and strain in CFRP-confined concrete cylinders. Compared to existing models, the proposed model demonstrated greater predictive accuracy (R2 = 0.98 for stress and 0.91 for strain) and reduced error metrics (RMSE and scatter index). ANOVA confirmed the statistical significance of the model’s predictions (p < 0.00001 for stress, p = 0.002 for strain). These findings highlight the performance advantages and material efficiency of non-uniform CFRP confinement and support the utility of the proposed model as a practical design tool for developing advanced confinement strategies in structural engineering.