Tri Van Tran
Research Subjects
Tri Van Tran has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Nguyen Le-Phuc
Vietnam Petroleum Institute, Ho Chi Minh City, Vietnam
2 shared publications - Phuong Thuy Ngo
PetroVietnam Research and Development Center for Petroleum Processing, Vietnam Petroleum Institute, Lot E2b-5, D1 Road, Saigon Hi-Tech Park, Tan Phu Ward, District 9, Ho Chi Minh City 700000, Vietnam
2 shared publications - Duc Anh Nguyen
Catalysis Research Department , Vietnam Petroleum Institute , Block E2b, D1 Street, High Tech Park, Tan Phu Ward, District 9 , Ho Chi Minh city , Vietnam
1 shared publication - Ngoc Thuy Luong
PetroVietnam Research and Development Center for Petroleum Processing, Vietnam Petroleum Institute, Lot E2b-5, D1 Road, Saigon Hi-Tech Park, Tan Phu Ward, District 9, Ho Chi Minh City 700000, Vietnam
1 shared publication - Phuong Nguyen Xuan Vo
Faculty of Applied Sciences, Ton Duc Thang University, Ho Chi Minh City, Vietnam
1 shared publication - Thu Hoai Nguyen
Catalysis Research Department , Vietnam Petroleum Institute , Block E2b, D1 Street, High Tech Park, Tan Phu Ward, District 9 , Ho Chi Minh city , Vietnam
1 shared publication
Latest Publications
- Open Access
Enhanced Hydrothermal Stability and Propylene Selectivity of Electron Beam Irradiation-Induced Hierarchical Fluid Catalytic Cracking Additives
A cheap, environmentally friendly, easily scalable post-treatment of Na-ZSM-5 (Si/Al molar ratio = 20 or 30) via electron-beam irradiation to produce hierarchical H-ZSM-5 as a propylene-increasing fluid catalytic cracking additive was performed. Higher specific surface areas and highly accessible porous systems were obtained among the irradiated samples. A combination of 27Al, 1H magic angle spinning nuclear magnetic resonance and NH3-temperature-programmed desorption methods showed that upon irradiation, some of the framework’s tetrahedral Al atoms were removed as non-framework Al atoms via flexible coordination with Si-OH groups (either framework or non-framework defects), thus increasing the H-ZSM-5 acidity and stability during hydrothermal dealumination. The enhanced selectivity and stability toward propylene production over the irradiated H-ZSM-5 samples were attributed to the integration of the reserved population of medium acid sites into the highly accessible hierarchical network. N2 adsorption–desorption isotherm data showed that the Si-rich H-ZSM-5 samples possessed an obvious ink-bottle-shaped micro-mesopore network and a greater degree of disordered orientation of the straight pore systems toward the exterior surfaces. Micro-activity test data suggested that with an increasing Si/Al ratio, the H-ZSM-5 additives lost some extent of their cracking activity due to the constricted hierarchical pore network toward the exterior surface but gained more stability and selectivity for propylene due to the reserved medium acid sites.
Open AccessEnhanced Hydrothermal Stability and Propylene Selectivity of Electron Beam Irradiation-Induced Hierarchical Fluid Catalytic Cracking Additives
A cheap, environmentally friendly, easily scalable post-treatment of Na-ZSM-5 (Si/Al molar ratio = 20 or 30) via electron-beam irradiation to produce hierarchical H-ZSM-5 as a propylene-increasing fluid catalytic cracking additive was performed. Higher specific surface areas and highly accessible porous systems were obtained among the irradiated samples. A combination of 27Al, 1H magic angle spinning nuclear magnetic resonance and NH3-temperature-programmed desorption methods showed that upon irradiation, some of the framework’s tetrahedral Al atoms were removed as non-framework Al atoms via flexible coordination with Si-OH groups (either framework or non-framework defects), thus increasing the H-ZSM-5 acidity and stability during hydrothermal dealumination. The enhanced selectivity and stability toward propylene production over the irradiated H-ZSM-5 samples were attributed to the integration of the reserved population of medium acid sites into the highly accessible hierarchical network. N2 adsorption–desorption isotherm data showed that the Si-rich H-ZSM-5 samples possessed an obvious ink-bottle-shaped micro-mesopore network and a greater degree of disordered orientation of the straight pore systems toward the exterior surfaces. Micro-activity test data suggested that with an increasing Si/Al ratio, the H-ZSM-5 additives lost some extent of their cracking activity due to the constricted hierarchical pore network toward the exterior surface but gained more stability and selectivity for propylene due to the reserved medium acid sites.
- 11 July 2017
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 16 (4)
Application of NaA Membrane Reactor for Methanol Synthesis in CO 2 Hydrogenation at Low Pressure
The process of CO 2 hydrogenation into methanol has recently attracted more attention for reducing CO 2 , a main green-house gas in the atmosphere. In addition, methanol can be used as fuel or a basic chemical to satisfy the growing demand for energy in the world. In this study, the performance of NaA membrane reactor on the methanol yield and methanol selectivity obtained from the CO 2 hydrogenation process was evaluated at different reaction conditions by varying the temperature, pressure, gas hourly space velocity (GHSV) and H 2 /CO 2 ratio. The results show that the methanol yields and methanol selectivities obtained from the membrane reactor (MR) at all reaction conditions are higher than those from the traditional reactor (TR). The ratio of methanol yield in MR over methanol yield in TR are varied from 1.4 to 1.7 depending on the operating conditions. It is also observed that the use of membrane reactor is more efficient at low GHSV and the temperature in the range of 220–240°C.
- 11 July 2017
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 16 (4)
Application of NaA Membrane Reactor for Methanol Synthesis in CO 2 Hydrogenation at Low Pressure
The process of CO 2 hydrogenation into methanol has recently attracted more attention for reducing CO 2 , a main green-house gas in the atmosphere. In addition, methanol can be used as fuel or a basic chemical to satisfy the growing demand for energy in the world. In this study, the performance of NaA membrane reactor on the methanol yield and methanol selectivity obtained from the CO 2 hydrogenation process was evaluated at different reaction conditions by varying the temperature, pressure, gas hourly space velocity (GHSV) and H 2 /CO 2 ratio. The results show that the methanol yields and methanol selectivities obtained from the membrane reactor (MR) at all reaction conditions are higher than those from the traditional reactor (TR). The ratio of methanol yield in MR over methanol yield in TR are varied from 1.4 to 1.7 depending on the operating conditions. It is also observed that the use of membrane reactor is more efficient at low GHSV and the temperature in the range of 220–240°C.