Chukwudi Okoro
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chukwudi Okoro has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
Bart Swinnen
Imec, 75 Kapeldreef, B-3001 Leuven, Belgium
2 shared publicationsBart Vandevelde
Imec, 75 Kapeldreef, B-3001 Leuven, Belgium
2 shared publicationsDirk Vandepitte
Katholieke Universiteit Leuven, Belgium
2 shared publicationsEric Beyne
Imec, 75 Kapeldreef, B-3001 Leuven, Belgium
2 shared publicationsGeert Eneman
IMEC, 75 Kapeldreef, B-3001 Leuven, Belgium; Katholieke Universiteit Leuven, Belgium
2 shared publicationsMario Gonzalez
Imec, 75 Kapeldreef, B-3001 Leuven, Belgium
2 shared publications
Latest Publications
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 05695503,p. 249-255
Analysis of the Induced Stresses in Silicon During Thermcompression Cu-Cu Bonding of Cu-Through-Vias in 3D-SIC Architecture
A new approach to 3D stacking of chips is being developed at IMEC and is called 3D-stacked IC (3D-SIC). In this approach, interconnection between strata is achieved by thermo-compression bonding of Cu-vias to a Cu-landing pad. In this paper we use finite element methods to study the influence of the resultant induced stresses in silicon as a result of CTE mismatch between silicon and copper and that also caused by the applied thermo-compression bonding force. Bonding temperature is found to be the main cause of induced stresses during thermo-compression bonding. The induced stresses decreased with a decrease in the silicon thickness. The keep-away-zone of the transistors from the influence of stresses from the Cu-vias is found to be dependent on the diameter of the Cu-via and the doping concentration of the transistors.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 05695503,p. 249-255
Analysis of the Induced Stresses in Silicon During Thermcompression Cu-Cu Bonding of Cu-Through-Vias in 3D-SIC Architecture
A new approach to 3D stacking of chips is being developed at IMEC and is called 3D-stacked IC (3D-SIC). In this approach, interconnection between strata is achieved by thermo-compression bonding of Cu-vias to a Cu-landing pad. In this paper we use finite element methods to study the influence of the resultant induced stresses in silicon as a result of CTE mismatch between silicon and copper and that also caused by the applied thermo-compression bonding force. Bonding temperature is found to be the main cause of induced stresses during thermo-compression bonding. The induced stresses decreased with a decrease in the silicon thickness. The keep-away-zone of the transistors from the influence of stresses from the Cu-vias is found to be dependent on the diameter of the Cu-via and the doping concentration of the transistors.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Prediction of the Influence of Induced Stresses in Silicon on CMOS Performance in a Cu-Through-Via Interconnect Technology
One approach to 3D chip stacking and integration is to process filled Cu-vias into the Si and to attach them to a next level die by means of thermocompression bonding. This results in induced stresses in the silicon due to the large CTE disparity between copper and silicon, and also from the force applied during thermocompression bonding. These stresses can have an impact on the performance of the transistors and may as well result in die fracture. This paper studies these stresses through Finite Element modeling. We found that the keep-away- zone of the transistors from the copper via where transistor performance is impacted by the through-Si interconnect proximity, is proportional to the via diameter. The bonding temperature is found to be the main cause for the induced stresses during the thermocompression bonding process. The induced stresses in silicon decrease with decreasing the silicon thickness.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Prediction of the Influence of Induced Stresses in Silicon on CMOS Performance in a Cu-Through-Via Interconnect Technology
One approach to 3D chip stacking and integration is to process filled Cu-vias into the Si and to attach them to a next level die by means of thermocompression bonding. This results in induced stresses in the silicon due to the large CTE disparity between copper and silicon, and also from the force applied during thermocompression bonding. These stresses can have an impact on the performance of the transistors and may as well result in die fracture. This paper studies these stresses through Finite Element modeling. We found that the keep-away- zone of the transistors from the copper via where transistor performance is impacted by the through-Si interconnect proximity, is proportional to the via diameter. The bonding temperature is found to be the main cause for the induced stresses during the thermocompression bonding process. The induced stresses in silicon decrease with decreasing the silicon thickness.