Jéssyca Mendes Silva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jéssyca Mendes Silva has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Patricia Mota Milhomem
Universidade de Brasília
1 shared publication - Patrick Silva Costa
Engenheiro Civil, bacharel pela Universidade Federal do Pará - UFPA
1 shared publication
Latest Publications
- Open Access
- 28 August 2017
- Published by Universidade Federal de Goias in REEC - Revista Eletrônica de Engenharia Civil
- Vol. 14 (1)
AVALIAÇÃO DAS PROPRIEDADES MECÂNICAS DO CONCRETO PRODUZIDO COM RESÍDUO DE ISOLADORES ELÉTRICOS DE PORCELANA
RESUMO: A busca por novos materiais capazes de substituir, em parte, componentes do concreto tem alavancado pesquisas em diversas áreas, principalmente no que se refere à reciclagem de resíduos (construção, indústria e outros). Neste contexto, a utilização de isoladores elétricos de porcelana vem sendo estudada como uma possibilidade eficaz de substituição do agregado miúdo. Este trabalho, avaliou os efeitos da substituição de 25% e 50%, em relação ao agregado miúdo, utilizando um traço de 1:1,43:2,07:0,4 (cimento:agregado graúdo:agregado miúdo:água) e, através da caracterização física do resíduo, o mesmo foi classificado como areia grossa (influência do processo de moagem). Realizou-se ensaios de absorção (aos 28 dias), resistência à compressão e à tração. O ensaio de absorção comprovou que o isolador, mesmo tendo maior absorção do que a areia natural (0,56% e 0,34%, respectivamente) não interferiu no valor do abatimento do concreto. Os resultados de resistência à compressão mostraram uma melhora considerável com base nos dados obtidos, comprovando a eficácia da utilização deste material como substituição parcial dos agregados na composição do concreto. ABSTRACT: The search for new materials capable of partially replacing concrete components has leveraged research in a number of areas, particularly with regard to waste recycling (construction, industry and others). In this context, the use of porcelain electrical insulators has been studied as an effective possibility of replacing the small aggregate. In this paper evaluated the effects of 25% and 50% substitution in relation to the fine aggregate using a 1: 1: 43: 2.07: 0.4 (cement: aggregate coarse: fine aggregate: water). Through the physical characterization of the residue, the same was classified as coarse sand (influence of the grinding process). Absorption (at 28 days), compressive strength and tensile were performed. The absorption test showed that the insulator, although having a higher absorption than the natural sand (0.56% and 0.34%, respectively), did not interfere with the value of the slump test of concrete. The results of compressive strength showed a considerable improvement based on the data obtained, proving the effectiveness of the use of this material as partial replacement of the aggregates in the concrete composition.
- 28 August 2017
- Published by Universidade Federal de Goias in REEC - Revista Eletrônica de Engenharia Civil
- Vol. 14 (1)
Open AccessAVALIAÇÃO DAS PROPRIEDADES MECÂNICAS DO CONCRETO PRODUZIDO COM RESÍDUO DE ISOLADORES ELÉTRICOS DE PORCELANA
RESUMO: A busca por novos materiais capazes de substituir, em parte, componentes do concreto tem alavancado pesquisas em diversas áreas, principalmente no que se refere à reciclagem de resíduos (construção, indústria e outros). Neste contexto, a utilização de isoladores elétricos de porcelana vem sendo estudada como uma possibilidade eficaz de substituição do agregado miúdo. Este trabalho, avaliou os efeitos da substituição de 25% e 50%, em relação ao agregado miúdo, utilizando um traço de 1:1,43:2,07:0,4 (cimento:agregado graúdo:agregado miúdo:água) e, através da caracterização física do resíduo, o mesmo foi classificado como areia grossa (influência do processo de moagem). Realizou-se ensaios de absorção (aos 28 dias), resistência à compressão e à tração. O ensaio de absorção comprovou que o isolador, mesmo tendo maior absorção do que a areia natural (0,56% e 0,34%, respectivamente) não interferiu no valor do abatimento do concreto. Os resultados de resistência à compressão mostraram uma melhora considerável com base nos dados obtidos, comprovando a eficácia da utilização deste material como substituição parcial dos agregados na composição do concreto. ABSTRACT: The search for new materials capable of partially replacing concrete components has leveraged research in a number of areas, particularly with regard to waste recycling (construction, industry and others). In this context, the use of porcelain electrical insulators has been studied as an effective possibility of replacing the small aggregate. In this paper evaluated the effects of 25% and 50% substitution in relation to the fine aggregate using a 1: 1: 43: 2.07: 0.4 (cement: aggregate coarse: fine aggregate: water). Through the physical characterization of the residue, the same was classified as coarse sand (influence of the grinding process). Absorption (at 28 days), compressive strength and tensile were performed. The absorption test showed that the insulator, although having a higher absorption than the natural sand (0.56% and 0.34%, respectively), did not interfere with the value of the slump test of concrete. The results of compressive strength showed a considerable improvement based on the data obtained, proving the effectiveness of the use of this material as partial replacement of the aggregates in the concrete composition.