Marko S. Milosavljevic
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Marko S. Milosavljevic has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Shane R. Johnson
Center for Photonics Innovation and Electrical, Computer, and Energy Engineering, Arizona State University 3 , Tempe, Arizona 85287
6 shared publications - Preston T. Webster
Air Force Research Laboratory, Space Vehicles Directorate 2 , Kirtland AFB, New Mexico 87117
5 shared publications - Alexander T. Newell
Air Force Research Laboratory, Space Vehicles Directorate, Kirtland AFB 1 , New Mexico 87117
4 shared publications - Christian P. Morath
Air Force Research Laboratory (AFRL), Kirtland AFB, NM, USA
4 shared publications - Rigo A. Carrasco
Air Force Research Laboratory, Space Vehicles Directorate, Kirtland AFB 1 , New Mexico 87117
4 shared publications - Diana Maestas
Air Force Research Laboratory (AFRL), Kirtland AFB, NM, USA
3 shared publications
Latest Publications
- 9 March 2026
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 44 (3)
From binary to quinary: The rationale and development of GaInAsSbBi for mid- and long-wave infrared sensing applications
Given the added complexity in flux calibration and composition evaluation inherent to quinary alloy growth, what motivates compounding the challenges of III–V-Bi growth with the goal of producing a quinary alloy of GaInAsSbBi for mid- and long-wave infrared sensing applications? Each elemental constituent provides some additional design freedom to achieve the ultimate goal of producing a lattice-matched, bulk random alloy mid-wave infrared III–V material with smooth surface morphology and high optoelectronic quality to enable high performance elevated operating temperatures. This paper reviews the evolution of Bi-containing semiconductor research, focusing on mid- and long-wave infrared materials and highlighting key research findings that motivated the decisions to accept the added complexity in going from binaries like InAs or InSb, to InAsBi, to InAsSbBi, and, finally, to GaInAsSbBi to meet the performance demands of advanced infrared sensing applications.
- 9 March 2026
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 44 (3)
From binary to quinary: The rationale and development of GaInAsSbBi for mid- and long-wave infrared sensing applications
Given the added complexity in flux calibration and composition evaluation inherent to quinary alloy growth, what motivates compounding the challenges of III–V-Bi growth with the goal of producing a quinary alloy of GaInAsSbBi for mid- and long-wave infrared sensing applications? Each elemental constituent provides some additional design freedom to achieve the ultimate goal of producing a lattice-matched, bulk random alloy mid-wave infrared III–V material with smooth surface morphology and high optoelectronic quality to enable high performance elevated operating temperatures. This paper reviews the evolution of Bi-containing semiconductor research, focusing on mid- and long-wave infrared materials and highlighting key research findings that motivated the decisions to accept the added complexity in going from binaries like InAs or InSb, to InAsBi, to InAsSbBi, and, finally, to GaInAsSbBi to meet the performance demands of advanced infrared sensing applications.
- Open Access
- 2 September 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (9)
Spectroscopic ellipsometry measurement and analysis of the optical constants of InAs/InAsSb and InGaAs/InAsSb superlattices and their bulk constituents
The optical constants of strain-balanced InAs/InAsSb and InGaAs/InAsSb superlattices and their constituents GaAs, GaSb, InAs, InSb, and InAsSb are measured using spectroscopic ellipsometry. An optical constant model is developed that accurately describes the index of refraction and absorption coefficient in the vicinity of the fundamental bandgap of these III–V materials. The model describes the spectral shape of the absorption edge in terms of bandgap energy, below-bandgap Urbach absorption tail, and above-bandgap power law. The index of refraction in the vicinity of the bandgap is described using Kramers–Kronig integration over the absorption edge. In the analysis, an optical structure model that comprises the sample layer structure and optical constants is constructed to simulate the reflection of polarized light from the sample surface. The optical constant model is implemented within the optical structure model and fit to the measured ellipsometric data with the optical constants of the layer of interest as best-fit parameters. The superlattice measurements exhibit spurious periodic peaks in the optical constants extracted using the point-by-point fit method. Multi-sample analysis of identical midwave superlattices grown at different thicknesses significantly reduces the presence of the spurious peaks and, in general, improves the optical constant fit and the extraction of the absorption edge parameters. In comparing superlattice results, the InGaAs/InAsSb superlattices have a shorter period, demonstrate stronger absorption due to greater electron–hole wavefunction overlap, and exhibit broader absorption tails as a result of greater alloy and interface disorder.
- 2 September 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (9)
Open AccessSpectroscopic ellipsometry measurement and analysis of the optical constants of InAs/InAsSb and InGaAs/InAsSb superlattices and their bulk constituents
The optical constants of strain-balanced InAs/InAsSb and InGaAs/InAsSb superlattices and their constituents GaAs, GaSb, InAs, InSb, and InAsSb are measured using spectroscopic ellipsometry. An optical constant model is developed that accurately describes the index of refraction and absorption coefficient in the vicinity of the fundamental bandgap of these III–V materials. The model describes the spectral shape of the absorption edge in terms of bandgap energy, below-bandgap Urbach absorption tail, and above-bandgap power law. The index of refraction in the vicinity of the bandgap is described using Kramers–Kronig integration over the absorption edge. In the analysis, an optical structure model that comprises the sample layer structure and optical constants is constructed to simulate the reflection of polarized light from the sample surface. The optical constant model is implemented within the optical structure model and fit to the measured ellipsometric data with the optical constants of the layer of interest as best-fit parameters. The superlattice measurements exhibit spurious periodic peaks in the optical constants extracted using the point-by-point fit method. Multi-sample analysis of identical midwave superlattices grown at different thicknesses significantly reduces the presence of the spurious peaks and, in general, improves the optical constant fit and the extraction of the absorption edge parameters. In comparing superlattice results, the InGaAs/InAsSb superlattices have a shorter period, demonstrate stronger absorption due to greater electron–hole wavefunction overlap, and exhibit broader absorption tails as a result of greater alloy and interface disorder.
- Open Access
- 11 February 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (6)
Molecular beam epitaxy growth and optoelectronic properties of droplet-free lattice-matched GaInAsSbBi on GaSb with wavelength extension exceeding 5 μm
GaInAsSbBi alloys are grown lattice-matched on GaSb by molecular beam epitaxy demonstrating smooth surface morphologies, >5 μm wavelength photoluminescence emission, and minority carrier lifetimes >1 μs. At a growth temperature of 400 °C, the Ga flux is systematically increased and the Bi flux systematically decreased to identify GaInAsSbBi growth conditions that yield smooth droplet-free surface morphologies. The minority carrier lifetime is evaluated using time-resolved photoluminescence, where it is observed that GaInAsSbBi samples exhibit minority carrier lifetimes comparable to their Bi-free GaInAsSb counterparts, on the order of 1.5–2 μs. The bandgap and Urbach energy are evaluated from steady-state photoluminescence to gain insight into the impact of the incorporated Bi. Coupled with Rutherford backscattering spectrometry measurements of the Bi mole fraction, bandgap reduction rates of 97 meV/% Bi in InAsSbBi and 150 meV/% Bi in GaInAsSbBi are observed, significantly higher than previous evaluations in InAsSbBi (35–55 meV/% Bi). Detailed comparisons of the Bi mole fraction, bandgap energy, and Urbach energy indicate that the bandgap reduction potential in this alloy system is inhibited by the formation of Bi clusters; however, the inclusion of Ga in the quinary alloy is effective in suppressing Bi's tendency to incorporate in clusters for Ga mole fractions >9%, maximizing the bandgap reduction per unit Bi and overall optoelectronic quality.
- 11 February 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (6)
Open AccessMolecular beam epitaxy growth and optoelectronic properties of droplet-free lattice-matched GaInAsSbBi on GaSb with wavelength extension exceeding 5 μm
GaInAsSbBi alloys are grown lattice-matched on GaSb by molecular beam epitaxy demonstrating smooth surface morphologies, >5 μm wavelength photoluminescence emission, and minority carrier lifetimes >1 μs. At a growth temperature of 400 °C, the Ga flux is systematically increased and the Bi flux systematically decreased to identify GaInAsSbBi growth conditions that yield smooth droplet-free surface morphologies. The minority carrier lifetime is evaluated using time-resolved photoluminescence, where it is observed that GaInAsSbBi samples exhibit minority carrier lifetimes comparable to their Bi-free GaInAsSb counterparts, on the order of 1.5–2 μs. The bandgap and Urbach energy are evaluated from steady-state photoluminescence to gain insight into the impact of the incorporated Bi. Coupled with Rutherford backscattering spectrometry measurements of the Bi mole fraction, bandgap reduction rates of 97 meV/% Bi in InAsSbBi and 150 meV/% Bi in GaInAsSbBi are observed, significantly higher than previous evaluations in InAsSbBi (35–55 meV/% Bi). Detailed comparisons of the Bi mole fraction, bandgap energy, and Urbach energy indicate that the bandgap reduction potential in this alloy system is inhibited by the formation of Bi clusters; however, the inclusion of Ga in the quinary alloy is effective in suppressing Bi's tendency to incorporate in clusters for Ga mole fractions >9%, maximizing the bandgap reduction per unit Bi and overall optoelectronic quality.
- Open Access
- 1 August 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (5)
Impact of unintentional Sb in the tensile InAs layer of strain-balanced type-II InAs/InAsSb superlattices grown on GaSb by molecular beam epitaxy
The impact of unintentional incorporation of Sb in the tensile InAs layer of type-II strain-balanced InAs/InAsSb superlattices is investigated. Several coherently strained midwave and longwave superlattices are grown on (100) GaSb substrates by molecular beam epitaxy and examined using x-ray diffraction and temperature-dependent photoluminescence spectroscopy. The zero-order diffraction angle provides the average Sb mole fraction of the strain-balanced superlattice period. Analysis of the higher order diffraction angles, along with the individual layer growth times and strain, provides the InAs and InAsSb layer thicknesses. Analysis of the photoluminescence measurements provides the ground-state bandgap of the superlattice, which along with simulations of the ground-state energies of the electrons and holes using a Kronig–Penney model, specify how the Sb is distributed between the tensile and compressive layers of the period and ultimately the quantity of unintentional Sb in the InAs layer. The unintentional Sb mole fractions observed in the tensile InAs layers are 1.9% for midwave and 1.2% for longwave. When compared to superlattices with the same period and no Sb in the tensile layer, the presence of unintentional Sb blue-shifts the 77 K temperature cutoff wavelength from 6.3 to 5.3 μm for midwave and from 18.8 to 12.0 μm for longwave.
- 1 August 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (5)
Open AccessImpact of unintentional Sb in the tensile InAs layer of strain-balanced type-II InAs/InAsSb superlattices grown on GaSb by molecular beam epitaxy
The impact of unintentional incorporation of Sb in the tensile InAs layer of type-II strain-balanced InAs/InAsSb superlattices is investigated. Several coherently strained midwave and longwave superlattices are grown on (100) GaSb substrates by molecular beam epitaxy and examined using x-ray diffraction and temperature-dependent photoluminescence spectroscopy. The zero-order diffraction angle provides the average Sb mole fraction of the strain-balanced superlattice period. Analysis of the higher order diffraction angles, along with the individual layer growth times and strain, provides the InAs and InAsSb layer thicknesses. Analysis of the photoluminescence measurements provides the ground-state bandgap of the superlattice, which along with simulations of the ground-state energies of the electrons and holes using a Kronig–Penney model, specify how the Sb is distributed between the tensile and compressive layers of the period and ultimately the quantity of unintentional Sb in the InAs layer. The unintentional Sb mole fractions observed in the tensile InAs layers are 1.9% for midwave and 1.2% for longwave. When compared to superlattices with the same period and no Sb in the tensile layer, the presence of unintentional Sb blue-shifts the 77 K temperature cutoff wavelength from 6.3 to 5.3 μm for midwave and from 18.8 to 12.0 μm for longwave.
- Open Access
- 31 July 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (5)
Demonstration of a 4.32 μ m cutoff InAsSbBi nBn photodetector, a lattice-matched random alloy III–V solution for mid-wave infrared sensing
InAsSbBi nBn photodetectors are demonstrated that are lattice-matched to the underlying GaSb substrate with a 4.32 μm wavelength cutoff at 150 K that is 0.3 μm longer than that of lattice-matched InAsSb at this temperature reflecting a 0.5% Bi mole fraction in the InAsSbBi active region. A low growth temperature was utilized to facilitate the incorporation of Bi, resulting in a minority carrier lifetime on the order of 24 ns in the InAsSbBi active region. Nevertheless, the detectors exhibit a quantum efficiency of 17% at 3.3 μm wavelength with a dark current density of 50 μA/cm2 at 150 K and −0.4 V bias and the strong photoresponse turn-on characteristic of a random alloy at 4.32 μm wavelength and 150 K. A shot noise-equivalent irradiance analysis indicates that this detectors' dark-current-limited noise-equivalent irradiance of 1012 cm−2 s−1 is two orders of magnitude greater than the Rule 07 expectation for this cutoff, and dark-current-limited shot noise-equivalent irradiance performance transitions to photon-limited at 1.7 × 1015 photons/cm2 s.
- 31 July 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (5)
Open AccessDemonstration of a 4.32 μ m cutoff InAsSbBi nBn photodetector, a lattice-matched random alloy III–V solution for mid-wave infrared sensing
InAsSbBi nBn photodetectors are demonstrated that are lattice-matched to the underlying GaSb substrate with a 4.32 μm wavelength cutoff at 150 K that is 0.3 μm longer than that of lattice-matched InAsSb at this temperature reflecting a 0.5% Bi mole fraction in the InAsSbBi active region. A low growth temperature was utilized to facilitate the incorporation of Bi, resulting in a minority carrier lifetime on the order of 24 ns in the InAsSbBi active region. Nevertheless, the detectors exhibit a quantum efficiency of 17% at 3.3 μm wavelength with a dark current density of 50 μA/cm2 at 150 K and −0.4 V bias and the strong photoresponse turn-on characteristic of a random alloy at 4.32 μm wavelength and 150 K. A shot noise-equivalent irradiance analysis indicates that this detectors' dark-current-limited noise-equivalent irradiance of 1012 cm−2 s−1 is two orders of magnitude greater than the Rule 07 expectation for this cutoff, and dark-current-limited shot noise-equivalent irradiance performance transitions to photon-limited at 1.7 × 1015 photons/cm2 s.
- Open Access
- 19 January 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 129 (3) , 035303
Kinetic model for molecular beam epitaxy growth of InAsSbBi alloys
The growth of Bi-containing III-V alloys requires careful control over temperature and group-V fluxes due to the low equilibrium solubility of Bi and its tendency to surface segregate into Bi-rich droplet features. A model for molecular beam epitaxy growth based on the kinetics of atomic desorption, incorporation, surface accumulation, and droplet formation is applied to the bismide alloy InAsSbBi grown on GaSb substrates. A steady-state solution is derived for the Bi, Sb, and As mole fractions and surface layer coverages based on the Bi, Sb, and As fluxes. A nonlinear least-squares algorithm is used to fit the growth model parameters to experimentally measured Bi mole fractions in bulk and quantum well InAsSbBi samples grown at 400 °C and 420 °C. The Bi mole fraction ranges from 0.12% to 1.86% among 17 samples examined. The results indicate that as the growth temperature increases, the rate of Bi incorporation decreases and the rate of Bi self-desorption increases. A strong interaction is observed between Bi and As that plays a role in the desorption of excess Bi from the growth surface, thus reducing the likelihood of Bi-rich droplet formation when an excess As flux is present. Significantly, the model predicts that the incorporation of Bi is limited to mole fractions of 1.43% at 400 °C and 0.30% at 420 °C in lattice-matched bulk InAsSbBi grown on GaSb substrates.
- 19 January 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 129 (3) , 035303
Open AccessKinetic model for molecular beam epitaxy growth of InAsSbBi alloys
The growth of Bi-containing III-V alloys requires careful control over temperature and group-V fluxes due to the low equilibrium solubility of Bi and its tendency to surface segregate into Bi-rich droplet features. A model for molecular beam epitaxy growth based on the kinetics of atomic desorption, incorporation, surface accumulation, and droplet formation is applied to the bismide alloy InAsSbBi grown on GaSb substrates. A steady-state solution is derived for the Bi, Sb, and As mole fractions and surface layer coverages based on the Bi, Sb, and As fluxes. A nonlinear least-squares algorithm is used to fit the growth model parameters to experimentally measured Bi mole fractions in bulk and quantum well InAsSbBi samples grown at 400 °C and 420 °C. The Bi mole fraction ranges from 0.12% to 1.86% among 17 samples examined. The results indicate that as the growth temperature increases, the rate of Bi incorporation decreases and the rate of Bi self-desorption increases. A strong interaction is observed between Bi and As that plays a role in the desorption of excess Bi from the growth surface, thus reducing the likelihood of Bi-rich droplet formation when an excess As flux is present. Significantly, the model predicts that the incorporation of Bi is limited to mole fractions of 1.43% at 400 °C and 0.30% at 420 °C in lattice-matched bulk InAsSbBi grown on GaSb substrates.