Yufeng He
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Yufeng He has a total of 87 co-authors. Here are the top co-authors by number of shared publications:
- Rongmin Wang
Northwest Normal University
35 shared publications Pengfei Song
Key Lab. Eco-functional Polymer Materials of MOE, Institute of Polymer, College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070, China
21 shared publicationsBin Wang
Key Laboratory of Eco‐functional Polymer Materials of MOE Institute of Polymer, College of Chemistry & Chemical Engineering, Northwest Normal University Lanzhou China
7 shared publications- Pengfei Song
Northwest Normal University
7 shared publications Yaping Zhang
Key Lab. Eco-functional Polymer Materials of MOE, Institute of Polymers, College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou, 730070, China
7 shared publicationsHua Yang
Key Lab. Eco-functional Polymer Materials of MOE, Institute of Polymer, College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070, China
6 shared publications
Latest Publications
- 18 September 2025
- Published by Elsevier in Environmental Research
- Vol. 286 (Pt 2) , 122884
FeOOH@HAnB catalyst with exposed (211) facet: High stability and new degradation routes for tetracycline
- 18 September 2025
- Published by Elsevier in Environmental Research
- Vol. 286 (Pt 2) , 122884
FeOOH@HAnB catalyst with exposed (211) facet: High stability and new degradation routes for tetracycline
- 20 December 2024
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 291, 138969
Xanthan gum/ZrMOF biodegradable gel fertilizer: Sustainable water retention and crop growth
- 20 December 2024
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 291, 138969
Xanthan gum/ZrMOF biodegradable gel fertilizer: Sustainable water retention and crop growth
- 9 February 2024
- Published by Elsevier in Environmental Research
- Vol. 249, 118410
Fabrication of nano-hammer shaped CuO@HApNWs for catalytic degradation of tetracycline
- 9 February 2024
- Published by Elsevier in Environmental Research
- Vol. 249, 118410
Fabrication of nano-hammer shaped CuO@HApNWs for catalytic degradation of tetracycline
- 12 December 2023
- Published by Elsevier in Journal of Industrial and Engineering Chemistry
- Vol. 133, 355-366
CoZIFs conjugating nanowires of hydroxyapatite with ion-exchange for trapping organics and antibacterial activity
- 12 December 2023
- Published by Elsevier in Journal of Industrial and Engineering Chemistry
- Vol. 133, 355-366
CoZIFs conjugating nanowires of hydroxyapatite with ion-exchange for trapping organics and antibacterial activity
- 20 November 2023
- Published by Elsevier in Progress in Organic Coatings
- Vol. 186, 108084
Construction of thiazole-zwitterionic copolymer nanospheres with iso-bifunctional groups for excellent antibacterial activity
- 20 November 2023
- Published by Elsevier in Progress in Organic Coatings
- Vol. 186, 108084
Construction of thiazole-zwitterionic copolymer nanospheres with iso-bifunctional groups for excellent antibacterial activity
- 4 September 2023
- Published by Wiley in ChemistrySelect
- Vol. 8 (33)
Formation Mechanism of a Hierarchically Porous Carbon Based on Soybean Hull Residues and Its Adsorption Performance
Soybean residue has caused pollution to the environment due to high output. Herein, in order to reutilization soybean residue, a novel soybean hulls residue based hierarchically porous carbon was prepared by one‐step carbonization‐activation, and its structure and micromorphology were characterized by SEM, FT‐IR, Raman, TEM, BET and XPS. Based on results of characterization, which illustrated typical hierarchically pore structure with pore sizes are 1000 nm, 300 nm and 1.4 nm. The specific surface area and total pore volume were corresponded to 1455.41 m 2 /g and 0.731 cm 3 /g, respectively. And the pore‐forming mechanism was discussed in raw materials is a pyrolysis process. Furthermore, it was found that adsorption capacity of dye could got to 625 mg/g in 30 min when the adsorbent was 0.05 g. In summary, the soybean hulls residue based hierarchically pore material with large surface area and rich in pore structure, which will exhibit excellent performance towards wastewater treatment.
- 4 September 2023
- Published by Wiley in ChemistrySelect
- Vol. 8 (33)
Formation Mechanism of a Hierarchically Porous Carbon Based on Soybean Hull Residues and Its Adsorption Performance
Soybean residue has caused pollution to the environment due to high output. Herein, in order to reutilization soybean residue, a novel soybean hulls residue based hierarchically porous carbon was prepared by one‐step carbonization‐activation, and its structure and micromorphology were characterized by SEM, FT‐IR, Raman, TEM, BET and XPS. Based on results of characterization, which illustrated typical hierarchically pore structure with pore sizes are 1000 nm, 300 nm and 1.4 nm. The specific surface area and total pore volume were corresponded to 1455.41 m 2 /g and 0.731 cm 3 /g, respectively. And the pore‐forming mechanism was discussed in raw materials is a pyrolysis process. Furthermore, it was found that adsorption capacity of dye could got to 625 mg/g in 30 min when the adsorbent was 0.05 g. In summary, the soybean hulls residue based hierarchically pore material with large surface area and rich in pore structure, which will exhibit excellent performance towards wastewater treatment.
- Open Access
- 9 June 2023
- Published by Springer Nature in Research Square
A simple and efficient method for loess separation and composition analysis
Loess is a widely existing cheap natural inorganic material, due to its complex composition and insufficient understanding of its efficient utilization and repeated utilization, it has not been widely used. Therefore, in this article, a simple method with buoyancy and gravity sedimentation to separate loess into large, medium and small particles. Besides, the main components of different particle size loess particles were provided. The separated particles were characterized by Scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR), Brunauer-EmmettTeller (BET), Thermal gravity (TG), X-ray diffraction (XRD), X-ray fluorescence spectrum (XRF), and X-ray photoelectron spectroscopy (XPS). It was found that the mineral compositions in large, medium and small loess particles vary with particle size. The large loess particles contains more aluminosilicate, medium loess particles contains both aluminosilicate and clay. It can play different roles according to the content of different particle sizes of loess particles, and realize the efficient use of loess particles. The main component of small loess particles is clay. Clay particles have a wide range of applications and can be used for adsorption as well as catalytic degradation of pollutants as a catalyst carrier. Therefore, it is necessary to separate loess by a simple method to improve its utilization rate.
- 9 June 2023
- Published by Springer Nature in Research Square
Open AccessA simple and efficient method for loess separation and composition analysis
Loess is a widely existing cheap natural inorganic material, due to its complex composition and insufficient understanding of its efficient utilization and repeated utilization, it has not been widely used. Therefore, in this article, a simple method with buoyancy and gravity sedimentation to separate loess into large, medium and small particles. Besides, the main components of different particle size loess particles were provided. The separated particles were characterized by Scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR), Brunauer-EmmettTeller (BET), Thermal gravity (TG), X-ray diffraction (XRD), X-ray fluorescence spectrum (XRF), and X-ray photoelectron spectroscopy (XPS). It was found that the mineral compositions in large, medium and small loess particles vary with particle size. The large loess particles contains more aluminosilicate, medium loess particles contains both aluminosilicate and clay. It can play different roles according to the content of different particle sizes of loess particles, and realize the efficient use of loess particles. The main component of small loess particles is clay. Clay particles have a wide range of applications and can be used for adsorption as well as catalytic degradation of pollutants as a catalyst carrier. Therefore, it is necessary to separate loess by a simple method to improve its utilization rate.
- Open Access
- 17 December 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (12) , 32655
Correction to: Construction of HAnW‑based nanotwigs for removing inorganic fluorion in wastewater
- 17 December 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (12) , 32655
Open AccessCorrection to: Construction of HAnW‑based nanotwigs for removing inorganic fluorion in wastewater
- 5 December 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (12) , 32641-32654
Construction of HAnW-based nanotwigs for removing inorganic fluorion in wastewater
The environmental pollution with fluoride compounds was currently being paid more and more attention as it threatens the safety of animal and human life in an ecosystem. In this study, an eco-friendly adsorbing material for removing fluoride ion (F−) was prepared by hydroxyapatite nanowires (HAnWs), a typical biocompatible inorganic conjugates. UiO66, a typical zirconium-based metal–organic framework (MOF), was conjugated onto HAnW by a simple in situ hydrothermal reaction, which afforded a novel HAnW-based nanotwigs of conjugates like millet (UiO66@HAnWs). Being characterized by SEM, EDS, FT-IR, XRD, XPS, and TGA, the obtained UiO66@HAnWs were applied to removing F− in wastewater, and its adsorption capacity was optimized. It was found that UiO66@HAnWs had a bigger specific surface area (115.310 m2/g), and its efficiency for removing F− got to 99.3%, which was greatly improved than that of related materials. It was considered that the adsorption of F− on UiO66@HAnWs was mainly multi-molecular layer adsorption, which fluoride ions aggregate on the Zr(IV) active sites to attain ligand switching, and the nanoconjugated structure like nanotwigs of millet greatly improved its adsorption capacity. In summary, a novel eco-friendly UiO66@HAnWs with nanoconjugated structure could be constructed by simple hydrothermal method, which the agglomeration defects of MOFs were not only ameliorated, but also its adsorption capacity was greatly improved.
- 5 December 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (12) , 32641-32654
Construction of HAnW-based nanotwigs for removing inorganic fluorion in wastewater
The environmental pollution with fluoride compounds was currently being paid more and more attention as it threatens the safety of animal and human life in an ecosystem. In this study, an eco-friendly adsorbing material for removing fluoride ion (F−) was prepared by hydroxyapatite nanowires (HAnWs), a typical biocompatible inorganic conjugates. UiO66, a typical zirconium-based metal–organic framework (MOF), was conjugated onto HAnW by a simple in situ hydrothermal reaction, which afforded a novel HAnW-based nanotwigs of conjugates like millet (UiO66@HAnWs). Being characterized by SEM, EDS, FT-IR, XRD, XPS, and TGA, the obtained UiO66@HAnWs were applied to removing F− in wastewater, and its adsorption capacity was optimized. It was found that UiO66@HAnWs had a bigger specific surface area (115.310 m2/g), and its efficiency for removing F− got to 99.3%, which was greatly improved than that of related materials. It was considered that the adsorption of F− on UiO66@HAnWs was mainly multi-molecular layer adsorption, which fluoride ions aggregate on the Zr(IV) active sites to attain ligand switching, and the nanoconjugated structure like nanotwigs of millet greatly improved its adsorption capacity. In summary, a novel eco-friendly UiO66@HAnWs with nanoconjugated structure could be constructed by simple hydrothermal method, which the agglomeration defects of MOFs were not only ameliorated, but also its adsorption capacity was greatly improved.
- 25 June 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 29 (54) , 82297-82308
Construction of WO3 nanocubes@Loess for rapid photocatalytic degradation of organics in wastewater under sunlight
In nowadays, environmental pollution has been greatly improved, but the development of low-cost and environmentally friendly materials are still challenge in the field of water treatment. Herein, a cheap and eco-friendly natural loess particle (LoP) was used for in situ growth of tungsten trioxide nanocubes (WO3NCs) on its surface via a simple one-pot hydrothermal method, which afforded a stable loess-based photocatalyst (WO3NCs@LoP). It was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) analysis, UV–Vis diffuse reflectance spectra (UV–Vis DRS), and X-ray photoelectron spectroscopy (XPS). The photocatalytic performances of WO3NCs@LoP were applied to photodegradation of organics under visible-light illumination. It was found that the removal rate of methylene blue (MB) got to 99% within 20 min, which was higher than that of materials, such as pure LoP and WO3NCs. Moreover, the photocatalytic activity of WO3NCs@LoP remained 85% after 9 cycling times, indicating its high stability and reusability. It was suggested that the synergy of the well narrowed band gap and effectual control of e−-h+ recombination in WO3NCs@LoP improve its photodegradation efficiency. In summary, using natural minerals (LoP) as carrier, a novel eco-friendly photocatalyst could be explored for photodegradation of organic pollutions in wastewater treatment.
- 25 June 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 29 (54) , 82297-82308
Construction of WO3 nanocubes@Loess for rapid photocatalytic degradation of organics in wastewater under sunlight
In nowadays, environmental pollution has been greatly improved, but the development of low-cost and environmentally friendly materials are still challenge in the field of water treatment. Herein, a cheap and eco-friendly natural loess particle (LoP) was used for in situ growth of tungsten trioxide nanocubes (WO3NCs) on its surface via a simple one-pot hydrothermal method, which afforded a stable loess-based photocatalyst (WO3NCs@LoP). It was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) analysis, UV–Vis diffuse reflectance spectra (UV–Vis DRS), and X-ray photoelectron spectroscopy (XPS). The photocatalytic performances of WO3NCs@LoP were applied to photodegradation of organics under visible-light illumination. It was found that the removal rate of methylene blue (MB) got to 99% within 20 min, which was higher than that of materials, such as pure LoP and WO3NCs. Moreover, the photocatalytic activity of WO3NCs@LoP remained 85% after 9 cycling times, indicating its high stability and reusability. It was suggested that the synergy of the well narrowed band gap and effectual control of e−-h+ recombination in WO3NCs@LoP improve its photodegradation efficiency. In summary, using natural minerals (LoP) as carrier, a novel eco-friendly photocatalyst could be explored for photodegradation of organic pollutions in wastewater treatment.