Keli Pang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Keli Pang has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Changchun Hua
Yanshan University
11 shared publications - Yu Zhang
Yanshan University
10 shared publications - Jiannan Chen
Yanshan University
4 shared publications - Tong Yao
Yanshan University
3 shared publications - Dianrui Mu
School of Electrical Engineering, Yanshan University, Qinhuangdao, China
2 shared publications - Licui Zhao
Yanshan University
2 shared publications
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (10) , 14846-14856
Composite Learning Prescribed-Time Tracking Control of Robotic Manipulators With Guaranteed Performance and Safety
Guaranteeing stability, control performance, and safety in the control of uncertain robotic manipulators is a challenging issue. This article develops a composite learning prescribed-time tracking control strategy for uncertain robotic manipulators, which has the following two appealing features: 1) both precise trajectory tracking and accurate estimation of uncertain model parameters can be achieved within the prescribed time under the interval excitation (IE) condition; and 2) the controller, benefiting from accurate parameter estimation, is still effective after the prescribed time, which means that the system can operate continuously with the tracking error stabilized at the origin. These two features endow the uncertain robotic manipulators with prescribed-time stability capability. In addition, considering the prescribed performance requirements and limited joint space, a new dual-constrained-dependent barrier function (DCDBF) is developed by integrating a tracking error-based constraining function and a joint position-based constraining function. The proposed DCDBF decouples the constraints on tracking error and joint position, allowing the robotic manipulators to dynamically adjust their motion with prescribed performance while maintaining their joint position within the user-specified time-varying safety range. Ultimately, the effectiveness of the proposed control strategy is validated through simulation and experiment.
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (10) , 14846-14856
Composite Learning Prescribed-Time Tracking Control of Robotic Manipulators With Guaranteed Performance and Safety
Guaranteeing stability, control performance, and safety in the control of uncertain robotic manipulators is a challenging issue. This article develops a composite learning prescribed-time tracking control strategy for uncertain robotic manipulators, which has the following two appealing features: 1) both precise trajectory tracking and accurate estimation of uncertain model parameters can be achieved within the prescribed time under the interval excitation (IE) condition; and 2) the controller, benefiting from accurate parameter estimation, is still effective after the prescribed time, which means that the system can operate continuously with the tracking error stabilized at the origin. These two features endow the uncertain robotic manipulators with prescribed-time stability capability. In addition, considering the prescribed performance requirements and limited joint space, a new dual-constrained-dependent barrier function (DCDBF) is developed by integrating a tracking error-based constraining function and a joint position-based constraining function. The proposed DCDBF decouples the constraints on tracking error and joint position, allowing the robotic manipulators to dynamically adjust their motion with prescribed performance while maintaining their joint position within the user-specified time-varying safety range. Ultimately, the effectiveness of the proposed control strategy is validated through simulation and experiment.
- 27 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (4) , 5794-5804
Adaptive Control for Nonlinear Systems With Both Tracking Error Constraints and Full-State Constraints: Theory and Experimental Validation
Although numerous results exist on the control of nonlinear systems subject to either tracking error constraints or full-state constraints, most of them can essentially address only one aspect of these constraints. This article proposes a direct constraint solution that can handle both tracking error constraints and full-state constraints simultaneously without imposing “feasibility conditions”. A novel dual-constraint barrier function (DCBF) is proposed by combining a tracking error-based constraining function with an output-based constraining function, thereby decoupling the constraints on both tracking error and output. Then, based on the DCBF and the remaining states-dependent barrier functions (RSDBFs), the nonlinear system subject to the two constraints is transformed into an equivalent “unconstrained” system. By stabilizing the “unconstrained” system, both tracking error constraints and full-state constraints are addressed, enabling the user to directly predefine the constraining functions for both tracking error and full states, especially including the output. Furthermore, by designing a new first-order filter and employing adaptive backstepping design, we develop a dynamic surface control approach for the constrained strict-feedback nonlinear systems with mismatched intrinsic unknown time-varying parameters, unknown control coefficients, to ensure asymptotic tracking without encountering “explosion of complexity”. The proposed method is experimentally tested on a robotic arm performing a water-sprinkling task, and comparative results validate its desirable performance in handling the two constraint requirements.
- 27 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (4) , 5794-5804
Adaptive Control for Nonlinear Systems With Both Tracking Error Constraints and Full-State Constraints: Theory and Experimental Validation
Although numerous results exist on the control of nonlinear systems subject to either tracking error constraints or full-state constraints, most of them can essentially address only one aspect of these constraints. This article proposes a direct constraint solution that can handle both tracking error constraints and full-state constraints simultaneously without imposing “feasibility conditions”. A novel dual-constraint barrier function (DCBF) is proposed by combining a tracking error-based constraining function with an output-based constraining function, thereby decoupling the constraints on both tracking error and output. Then, based on the DCBF and the remaining states-dependent barrier functions (RSDBFs), the nonlinear system subject to the two constraints is transformed into an equivalent “unconstrained” system. By stabilizing the “unconstrained” system, both tracking error constraints and full-state constraints are addressed, enabling the user to directly predefine the constraining functions for both tracking error and full states, especially including the output. Furthermore, by designing a new first-order filter and employing adaptive backstepping design, we develop a dynamic surface control approach for the constrained strict-feedback nonlinear systems with mismatched intrinsic unknown time-varying parameters, unknown control coefficients, to ensure asymptotic tracking without encountering “explosion of complexity”. The proposed method is experimentally tested on a robotic arm performing a water-sprinkling task, and comparative results validate its desirable performance in handling the two constraint requirements.
- 16 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 71 (2) , 1326-1333
Adaptive Control for Nonlinear Systems With Both Tracking Error Constraints and Full-State Constraints: A Universal Constraint Approach
This article studies the adaptive control problem for a class of uncertain strict-feedback nonlinear systems, where both tracking error and full states need to be directly constrained. First, a novel universal constraint approach is introduced, which combines a universal composite barrier function that depends on the tracking error and the output, with universal barrier functions that depend on the remaining states. Compared with existing research, it displays the following appealing features. First, both tracking error constraints and full-state constraints are ensured simultaneously without encountering the “feasibility conditions.” The constraints on the tracking error and the output are decoupled, and the constraining functions on both the tracking error and full states, especially including the output, can be directly determined by the user. Second, the proposed approach provides a universal solution that can handle both constrained and unconstrained cases uniformly without changing the control structure. Then, through a new coordinate transformation, the nonlinear system subject to the two constraints is converted into an equivalent “unconstrained” system. Further, by designing a modified filter and utilizing the adaptive backstepping design, an adaptive dynamic surface asymptotic controller is proposed to stabilize the “unconstrained” system. It is theoretically proved that the tracking error converges to zero asymptotically without “explosion of complexity,” and the features of the universal constraint approach are achieved. The effectiveness of the proposed control is also illustrated by simulation verification.
- 16 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 71 (2) , 1326-1333
Adaptive Control for Nonlinear Systems With Both Tracking Error Constraints and Full-State Constraints: A Universal Constraint Approach
This article studies the adaptive control problem for a class of uncertain strict-feedback nonlinear systems, where both tracking error and full states need to be directly constrained. First, a novel universal constraint approach is introduced, which combines a universal composite barrier function that depends on the tracking error and the output, with universal barrier functions that depend on the remaining states. Compared with existing research, it displays the following appealing features. First, both tracking error constraints and full-state constraints are ensured simultaneously without encountering the “feasibility conditions.” The constraints on the tracking error and the output are decoupled, and the constraining functions on both the tracking error and full states, especially including the output, can be directly determined by the user. Second, the proposed approach provides a universal solution that can handle both constrained and unconstrained cases uniformly without changing the control structure. Then, through a new coordinate transformation, the nonlinear system subject to the two constraints is converted into an equivalent “unconstrained” system. Further, by designing a modified filter and utilizing the adaptive backstepping design, an adaptive dynamic surface asymptotic controller is proposed to stabilize the “unconstrained” system. It is theoretically proved that the tracking error converges to zero asymptotically without “explosion of complexity,” and the features of the universal constraint approach are achieved. The effectiveness of the proposed control is also illustrated by simulation verification.
- 11 February 2025
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 113 (11) , 13437-13449
Composite learning-based unbiased control for nonholonomic mobile robots with sensor uncertainties
- 11 February 2025
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 113 (11) , 13437-13449
Composite learning-based unbiased control for nonholonomic mobile robots with sensor uncertainties
- 4 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (6) , 4483-4492
Adaptive Visual Servoing Control of Closed-Architecture Robots With Both Visibility Constraints and Tracking Error Constraints
Although there are significant achievements in adaptive visual servoing control of robots with the consideration of visibility constraints or tracking error constraints, most of these approaches are limited to addressing one aspect of the two constraint issues. This article presents a novel adaptive visual servoing control solution specifically designed for robots with closed architecture, effectively managing both visibility constraints and tracking error constraints simultaneously. First, by appropriately combining the image-space position-based constraining function and tracking error-based constraining function, we develop a novel composite barrier function (CBF), enabling the transformation of the visual servoing system with both visibility constraints and tracking error constraints into a functionally equivalent “unconstrained” one. By stabilizing the “unconstrained” system, both visibility constraints and tracking error constraints are handled simultaneously for the first time. Then, we introduce a CBF-based adaptive visual servoing loop controller, designed to dynamically compute the position or velocity commands for the torque control loop. The controller's proven ability to guarantee the convergence of the visual servoing system, without modifying the manufacturer-embedded torque controller, renders it suitable for a wide range of industrial/commercial robots with closed architecture. Experiments are conducted on an industrial manipulator to exhibit the superior capabilities of the method.
- 4 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (6) , 4483-4492
Adaptive Visual Servoing Control of Closed-Architecture Robots With Both Visibility Constraints and Tracking Error Constraints
Although there are significant achievements in adaptive visual servoing control of robots with the consideration of visibility constraints or tracking error constraints, most of these approaches are limited to addressing one aspect of the two constraint issues. This article presents a novel adaptive visual servoing control solution specifically designed for robots with closed architecture, effectively managing both visibility constraints and tracking error constraints simultaneously. First, by appropriately combining the image-space position-based constraining function and tracking error-based constraining function, we develop a novel composite barrier function (CBF), enabling the transformation of the visual servoing system with both visibility constraints and tracking error constraints into a functionally equivalent “unconstrained” one. By stabilizing the “unconstrained” system, both visibility constraints and tracking error constraints are handled simultaneously for the first time. Then, we introduce a CBF-based adaptive visual servoing loop controller, designed to dynamically compute the position or velocity commands for the torque control loop. The controller's proven ability to guarantee the convergence of the visual servoing system, without modifying the manufacturer-embedded torque controller, renders it suitable for a wide range of industrial/commercial robots with closed architecture. Experiments are conducted on an industrial manipulator to exhibit the superior capabilities of the method.
- 30 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (1) , 426-435
Fixed-Time Composite Learning Control of Robots With Prescribed Time Error Constraints
This article investigates the adaptive composite learning control problem of robots subject to uncertain dynamics and prescribed time error constraints. Existing prescribed time error constraint methods only achieve semiglobal results or guarantee system order-dependent convergence rate. In this article, by integrating a new prescribed time performance function into a tracking error-based barrier function, a novel prescribed time error constraint method is proposed with the following appealing features: 1) the constraint method is global; 2) the tracking error converges to a compact set with a proximate exponential rate, which can be preassigned by the user regardless of system order; 3) both settling time and compact set can be preassigned by the user. To handle the uncertain dynamics caused by inaccurate measurement of parameters, a novel fixed-time composite learning robot control (FTCLRC) method is developed by combining a newly designed nonsingular fixed-time integral terminal sliding mode and the Moore–Penrose pseudoinverse-based composite learning technique. In comparison with existing composite learning robot control methods that can only ensure exponential convergence, or finite-time convergence, which is dependent on the unpredictable excitation strengths and initial system states, the proposed FTCLRC can guarantee that both the tracking error and parameters estimation error converge to zero in fixed-time, under a weak IE without singularity issue. In particular, the convergence time only depends on the user-designed parameters, independent of the system's initial states, and the unpredictable excitation strengths. Experiment results are given to show the superior performance of the proposed control method.
- 30 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (1) , 426-435
Fixed-Time Composite Learning Control of Robots With Prescribed Time Error Constraints
This article investigates the adaptive composite learning control problem of robots subject to uncertain dynamics and prescribed time error constraints. Existing prescribed time error constraint methods only achieve semiglobal results or guarantee system order-dependent convergence rate. In this article, by integrating a new prescribed time performance function into a tracking error-based barrier function, a novel prescribed time error constraint method is proposed with the following appealing features: 1) the constraint method is global; 2) the tracking error converges to a compact set with a proximate exponential rate, which can be preassigned by the user regardless of system order; 3) both settling time and compact set can be preassigned by the user. To handle the uncertain dynamics caused by inaccurate measurement of parameters, a novel fixed-time composite learning robot control (FTCLRC) method is developed by combining a newly designed nonsingular fixed-time integral terminal sliding mode and the Moore–Penrose pseudoinverse-based composite learning technique. In comparison with existing composite learning robot control methods that can only ensure exponential convergence, or finite-time convergence, which is dependent on the unpredictable excitation strengths and initial system states, the proposed FTCLRC can guarantee that both the tracking error and parameters estimation error converge to zero in fixed-time, under a weak IE without singularity issue. In particular, the convergence time only depends on the user-designed parameters, independent of the system's initial states, and the unpredictable excitation strengths. Experiment results are given to show the superior performance of the proposed control method.
- 1 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-8
Adaptive Finite-Time Parameter Estimation and Control for Constrained Robotic Systems
In adaptive robot control, accurate and fast parameter estimate is crucial since it can improve the control performance for the robotic systems. Most existing works only ensure accurate parameter estimates with exponential convergence rate or obtain finite-time (FT) convergence with nonzero estimation error. This paper proposes a novel adaptive FT parameter estimation and control scheme for uncertain robotic systems with the consideration of unavoidable joint position constraints. A new parameter estimation law is constructed by exploiting both online history data and current data such that accurate parameter estimation is ensured with a weak interval excitation (IE) condition instead of the typically stringent persistent excitation (PE) condition. Then, the parameter updating law is integrated into a nonsingular integral terminal sliding mode based adaptive controller to ensure zero parameter estimation error and tracking error in finite time without singular problem. Besides, a modified unified time-varying asymmetric barrier function (UTABF) is employed to handle the joint position constraints directly. The UTABF can not only deal with both constrained and unconstrained cases uniformly but also make the proposed control more user-friendly in design and less demanding in implementation. The effectiveness of the developed control scheme is verified by theoretical analysis and experiments.
- 1 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-8
Adaptive Finite-Time Parameter Estimation and Control for Constrained Robotic Systems
In adaptive robot control, accurate and fast parameter estimate is crucial since it can improve the control performance for the robotic systems. Most existing works only ensure accurate parameter estimates with exponential convergence rate or obtain finite-time (FT) convergence with nonzero estimation error. This paper proposes a novel adaptive FT parameter estimation and control scheme for uncertain robotic systems with the consideration of unavoidable joint position constraints. A new parameter estimation law is constructed by exploiting both online history data and current data such that accurate parameter estimation is ensured with a weak interval excitation (IE) condition instead of the typically stringent persistent excitation (PE) condition. Then, the parameter updating law is integrated into a nonsingular integral terminal sliding mode based adaptive controller to ensure zero parameter estimation error and tracking error in finite time without singular problem. Besides, a modified unified time-varying asymmetric barrier function (UTABF) is employed to handle the joint position constraints directly. The UTABF can not only deal with both constrained and unconstrained cases uniformly but also make the proposed control more user-friendly in design and less demanding in implementation. The effectiveness of the developed control scheme is verified by theoretical analysis and experiments.