Nedjima Bouzidi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nedjima Bouzidi has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
Abdelaziz Idres
University of Badji Mokhtar
1 shared publicationAthmane Bouzidi
University of Bejaia
1 shared publicationDjoudi Merabet
University of Bejaia
1 shared publicationFarid Ait Merzeg
University of Bejaia
1 shared publication- Hadjer Bouzeriba
Abderrahmane Mira University, Department of Mining and Geology, Bejaia, Algeria
1 shared publication Imen Laala
University of Bejaia
1 shared publication
Latest Publications
- Open Access
- 1 September 2025
- Published by Mineralogical Society in Clay Minerals
- Vol. 60 (3) , 273-284
Iron mining waste as a sustainable material for producing bricks: microstructure, mechanical and thermal properties
Iron mining waste is produced from the iron ore mining operations of El Ouenza Mine (north-east Algeria), and it is not currently recycled to preserve the environment. The current study aims at developing sustainable clay bricks by mixing clay with different proportions of iron mining waste (ranging from 10 to 50 wt.%) and fired at 850°C and 950°C. Addition of 30 wt.% Iron mining waste had a positive effect on the physical and mechanical properties of the fired clay bricks. Linear shrinkage, water absorption and porosity were reduced, while compressive and flexural strengths were increased. Furthermore, up to 30 wt.% of iron mining waste addition to the mixtures improved compressive and flexural strengths to 59.17 and 10.06 MPa, respectively, when the bricks were fired at 950°C. According to their thermal conductivity, the bricks with 10–50 wt.% iron mining waste are considered as thermal insulators, with thermal conductivity values ranging from 0.45 to 0.56 W m –1 K –1 . Adding 30 wt.% of iron mining waste can lead to the production of eco-friendly bricks with high mechanical and thermal properties, generating economic and environmental benefits.
- 1 September 2025
- Published by Mineralogical Society in Clay Minerals
- Vol. 60 (3) , 273-284
Open AccessIron mining waste as a sustainable material for producing bricks: microstructure, mechanical and thermal properties
Iron mining waste is produced from the iron ore mining operations of El Ouenza Mine (north-east Algeria), and it is not currently recycled to preserve the environment. The current study aims at developing sustainable clay bricks by mixing clay with different proportions of iron mining waste (ranging from 10 to 50 wt.%) and fired at 850°C and 950°C. Addition of 30 wt.% Iron mining waste had a positive effect on the physical and mechanical properties of the fired clay bricks. Linear shrinkage, water absorption and porosity were reduced, while compressive and flexural strengths were increased. Furthermore, up to 30 wt.% of iron mining waste addition to the mixtures improved compressive and flexural strengths to 59.17 and 10.06 MPa, respectively, when the bricks were fired at 950°C. According to their thermal conductivity, the bricks with 10–50 wt.% iron mining waste are considered as thermal insulators, with thermal conductivity values ranging from 0.45 to 0.56 W m –1 K –1 . Adding 30 wt.% of iron mining waste can lead to the production of eco-friendly bricks with high mechanical and thermal properties, generating economic and environmental benefits.
- Open Access
Preparation of Geopolymeric Materials from Industrial Kaolins, with Variable Kaolinite Content and Alkali Silicates Precursors
In the present work, the development of geopolymeric materials with Na or K based on industrial kaolin samples, with variable kaolinite content and alkaline silicates, is studied. XRF, XRD, FTIR and SEM-EDS have been used as characterization techniques. Three ceramic kaolin samples, two from Algeria and one from Charente (France), have been considered. In particular, chemical and mineralogical characterization revealed elements distinct of Si and Al, and the content of pure kaolinite and secondary minerals. Metakaolinite was obtained by grinding and sieving raw kaolin at 80 μm and then by thermal activation at 750 °C for 1 h. This metakaolinite has been used as a base raw material to obtain geopolymers, using for this purpose different formulations of alkaline silicates with NaOH or KOH and variable Si/K molar ratios. The formation of geopolymeric materials by hydroxylation and polycondensation characterized with different Si/Al molar ratios, depending on the original metakaolinite content, has been demonstrated. Sodium carbonates have been detected by XRD and FTIR, and confirmed by SEM-EDS, in two of these geopolymer materials being products of NaOH carbonation.
Open AccessPreparation of Geopolymeric Materials from Industrial Kaolins, with Variable Kaolinite Content and Alkali Silicates Precursors
In the present work, the development of geopolymeric materials with Na or K based on industrial kaolin samples, with variable kaolinite content and alkaline silicates, is studied. XRF, XRD, FTIR and SEM-EDS have been used as characterization techniques. Three ceramic kaolin samples, two from Algeria and one from Charente (France), have been considered. In particular, chemical and mineralogical characterization revealed elements distinct of Si and Al, and the content of pure kaolinite and secondary minerals. Metakaolinite was obtained by grinding and sieving raw kaolin at 80 μm and then by thermal activation at 750 °C for 1 h. This metakaolinite has been used as a base raw material to obtain geopolymers, using for this purpose different formulations of alkaline silicates with NaOH or KOH and variable Si/K molar ratios. The formation of geopolymeric materials by hydroxylation and polycondensation characterized with different Si/Al molar ratios, depending on the original metakaolinite content, has been demonstrated. Sodium carbonates have been detected by XRD and FTIR, and confirmed by SEM-EDS, in two of these geopolymer materials being products of NaOH carbonation.
- 1 September 2018
- Published by Mineralogical Society in Clay Minerals
- Vol. 53 (3) , 403-412
Study of the microstructure and mechanical properties of halloysite–kaolinite/BaCO3ceramic composites
The present study examined the microstructure and mechanical properties of ceramic composites based on a kaolin from Djebel Debbagh, northeast Algeria, composed mainly of kaolinite and halloysite with the addition of various amounts of BaCO3. The composites were prepared by high-energy ball milling and sintered at 1100°C and 1200°C for 3 h. The samples sintered at 1200°C without BaCO3were composed mainly of mullite, which disappeared with increasing BaCO3content. X-ray diffraction investigation showed the presence of hexacelsian (BaAl2SiO6and BaAl2Si2O8), which disappeared at BaCO3contents >50 wt.% in favour of barium aluminium and barium silicate phases. At 40 wt.% BaCO3content, the porosity of the composites decreased from 0.7% to 0.1% and the microhardness increased from 7 to 8 GPa, respectively, at 1100°C and 1200°C due to the amorphous phase.
- 1 September 2018
- Published by Mineralogical Society in Clay Minerals
- Vol. 53 (3) , 403-412
Study of the microstructure and mechanical properties of halloysite–kaolinite/BaCO3ceramic composites
The present study examined the microstructure and mechanical properties of ceramic composites based on a kaolin from Djebel Debbagh, northeast Algeria, composed mainly of kaolinite and halloysite with the addition of various amounts of BaCO3. The composites were prepared by high-energy ball milling and sintered at 1100°C and 1200°C for 3 h. The samples sintered at 1200°C without BaCO3were composed mainly of mullite, which disappeared with increasing BaCO3content. X-ray diffraction investigation showed the presence of hexacelsian (BaAl2SiO6and BaAl2Si2O8), which disappeared at BaCO3contents >50 wt.% in favour of barium aluminium and barium silicate phases. At 40 wt.% BaCO3content, the porosity of the composites decreased from 0.7% to 0.1% and the microhardness increased from 7 to 8 GPa, respectively, at 1100°C and 1200°C due to the amorphous phase.