Chibuikem Nwagwu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chibuikem Nwagwu has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Christina Meskers
SINTEF, 7031 Trondheim, Norway
3 shared publications - Edgar G. Hertwich
Industrial Ecology Programme, Department of Energy and Process Engineering, Norwegian University of Science and Technology, Trondheim, Norway
2 shared publications - Jon Halfdanarson
SINTEF, 7031 Trondheim, Norway
2 shared publications - Sahin Akin
Department of Energy and Process Engineering Industrial Ecology Programme Norwegian University of Science and Technology Høgskoleringen 5 7034 Trondheim building NO
2 shared publications - Aida Eghbali
WANA Western Asia
1 shared publication Bouke Westra
1 shared publication
Latest Publications
- Open Access
- 18 September 2026
- Published by Springer Nature
- p. 181-193
Minding the Gap: Limitations of Existing Automation Potential Analysis Frameworks
The drive toward greater automation in manufacturing has intensified, yet many companies lack structured approaches to determining which assembly processes are most viable to automate and at what level. This study addresses that gap through a focused scoping review of automation potential analysis frameworks (APAF/APA-type approaches) relevant to assembly in the manufacturing sector. The review is structured around three focal approaches examined in depth: the CAD-based Automation Potential Analysis (APA) proposed by Neb et al. (2020), the implementation-oriented Automation Readiness Assessment (AURA/APA) approach presented by Bottner et al. (2025), and the Methods-Time Measurement (MTM-1)-based automation/HRC suitability method developed by Jakschik et al. (2024). Three additional HRC-oriented methods are presented in a more concise form to broaden the comparative basis. Following the scoping review, a gap analysis is conducted across six dimensions: technology coverage, techno-economic assessment, life cycle and environmental considerations, human and organisational factors, health and safety, and industrial validation. The findings reveal that current frameworks tend to focus narrowly on technical feasibility and labour-cost savings, while broader sustainability, human-factors, and implementation-readiness concerns remain underrepresented. The study concludes with recommendations for more integrated, multidimensional, and industrially validated approaches to analysing automation potential.
- 18 September 2026
- Published by Springer Nature
- p. 181-193
Open AccessMinding the Gap: Limitations of Existing Automation Potential Analysis Frameworks
The drive toward greater automation in manufacturing has intensified, yet many companies lack structured approaches to determining which assembly processes are most viable to automate and at what level. This study addresses that gap through a focused scoping review of automation potential analysis frameworks (APAF/APA-type approaches) relevant to assembly in the manufacturing sector. The review is structured around three focal approaches examined in depth: the CAD-based Automation Potential Analysis (APA) proposed by Neb et al. (2020), the implementation-oriented Automation Readiness Assessment (AURA/APA) approach presented by Bottner et al. (2025), and the Methods-Time Measurement (MTM-1)-based automation/HRC suitability method developed by Jakschik et al. (2024). Three additional HRC-oriented methods are presented in a more concise form to broaden the comparative basis. Following the scoping review, a gap analysis is conducted across six dimensions: technology coverage, techno-economic assessment, life cycle and environmental considerations, human and organisational factors, health and safety, and industrial validation. The findings reveal that current frameworks tend to focus narrowly on technical feasibility and labour-cost savings, while broader sustainability, human-factors, and implementation-readiness concerns remain underrepresented. The study concludes with recommendations for more integrated, multidimensional, and industrially validated approaches to analysing automation potential.
- Open Access
- 16 July 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 151 (1) , 5
Driving Aluminium Circularity Forward: Evaluating EU-Recommended LCA Methods Against the Net Scrap Alternative
Circularity in the aluminium manufacturing and use industries has attracted increasing attention in recent years. This is partly due to the criticality of the raw material and the drive for a more sustainable, greener society through the EU Green Deal and subsequent legislation/frameworks. Several stakeholders regard post-consumer scrap (PCS) as a panacea for this transition to circularity. Obtaining an appropriate, recycling-friendly post-consumer scrap alloy for a product is challenging, thereby intensifying competition in the PCS alloy market. Furthermore, manufacturers in the aluminium industry must conduct accurate and transparent assessments of their products. Life Cycle Assessment is the primary method used today. While several modelling approaches exist within LCA, the EU recommends using either the product environmental footprint (PEF) (50:50) or the Circular Footprint Formula (CFF) approach. This paper highlights the limitations of these modelling approaches and compares them with the net-scrap approach for LCA of high-voltage aluminium cables. The strength of the net-scrap approach lies in its robustness, particularly in demand-heavy PCS markets. It promotes the use of recycled inputs and end-of-life recyclability and allows for the inclusion of metal quality parameters. These are key levers for achieving high circularity (i.e., over 70%) in open-loop recycling of aluminium alloys.
- 16 July 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 151 (1) , 5
Open AccessDriving Aluminium Circularity Forward: Evaluating EU-Recommended LCA Methods Against the Net Scrap Alternative
Circularity in the aluminium manufacturing and use industries has attracted increasing attention in recent years. This is partly due to the criticality of the raw material and the drive for a more sustainable, greener society through the EU Green Deal and subsequent legislation/frameworks. Several stakeholders regard post-consumer scrap (PCS) as a panacea for this transition to circularity. Obtaining an appropriate, recycling-friendly post-consumer scrap alloy for a product is challenging, thereby intensifying competition in the PCS alloy market. Furthermore, manufacturers in the aluminium industry must conduct accurate and transparent assessments of their products. Life Cycle Assessment is the primary method used today. While several modelling approaches exist within LCA, the EU recommends using either the product environmental footprint (PEF) (50:50) or the Circular Footprint Formula (CFF) approach. This paper highlights the limitations of these modelling approaches and compares them with the net-scrap approach for LCA of high-voltage aluminium cables. The strength of the net-scrap approach lies in its robustness, particularly in demand-heavy PCS markets. It promotes the use of recycled inputs and end-of-life recyclability and allows for the inclusion of metal quality parameters. These are key levers for achieving high circularity (i.e., over 70%) in open-loop recycling of aluminium alloys.
- 23 February 2026
- Published by Springer Nature
- p. 1137-1145
How LCA Method Choice Skews the Carbon Footprint of Aluminium Cables with Post-consumer Scrap
- 23 February 2026
- Published by Springer Nature
- p. 1137-1145
How LCA Method Choice Skews the Carbon Footprint of Aluminium Cables with Post-consumer Scrap
- Open Access
- 13 October 2025
- Published by Springer Nature in Journal of Sustainable Metallurgy
- Vol. 11 (4) , 3590-3605
Integrating Artificial Intelligence into Life Cycle Assessment: A Framework for Balancing Automation and Human Expertise
Quantifying products’ environmental impacts is essential as policymakers and customers push for transparency and accountability in product sustainability. The applications of machine learning (ML) have extended to many fields, including environmental science. Several studies demonstrate the application of ML in life cycle assessment (LCA), but a gap remains in synthesizing the insights into a unique, deployable framework for rapid and (semi-) automated LCA of products and industrial processes. This is due to outdated, unlabeled, sparse, and irrelevant data and the industry’s poor maturity for AI and LCA. Based on a rapid literature review of the current applications of AI in LCA studies, we find that supervised learning algorithms are most preferred, primarily for data collection and inventory analysis. We evaluated a suite of AI tools for future application in LCA and concluded that the most benefit will be from using large language models (LLMs) and generative algorithms to improve the speed and accuracy of environmental impact assessments. Our developed framework—an AI integration architecture for LCA studies—ensures that human insight and control are retained. The work provides valuable guidance to industry-based sustainability practitioners on the importance of data quality, AI tool selection, cross-domain expertise, and collaboration. Graphical Abstract
- 13 October 2025
- Published by Springer Nature in Journal of Sustainable Metallurgy
- Vol. 11 (4) , 3590-3605
Open AccessIntegrating Artificial Intelligence into Life Cycle Assessment: A Framework for Balancing Automation and Human Expertise
Quantifying products’ environmental impacts is essential as policymakers and customers push for transparency and accountability in product sustainability. The applications of machine learning (ML) have extended to many fields, including environmental science. Several studies demonstrate the application of ML in life cycle assessment (LCA), but a gap remains in synthesizing the insights into a unique, deployable framework for rapid and (semi-) automated LCA of products and industrial processes. This is due to outdated, unlabeled, sparse, and irrelevant data and the industry’s poor maturity for AI and LCA. Based on a rapid literature review of the current applications of AI in LCA studies, we find that supervised learning algorithms are most preferred, primarily for data collection and inventory analysis. We evaluated a suite of AI tools for future application in LCA and concluded that the most benefit will be from using large language models (LLMs) and generative algorithms to improve the speed and accuracy of environmental impact assessments. Our developed framework—an AI integration architecture for LCA studies—ensures that human insight and control are retained. The work provides valuable guidance to industry-based sustainability practitioners on the importance of data quality, AI tool selection, cross-domain expertise, and collaboration. Graphical Abstract
- Open Access
- 11 May 2025
- Published by Elsevier in Social Sciences & Humanities Open
- Vol. 11
Avoided emissions through reuse: The contribution of ReStore in Trondheim's circular economy transition
- 11 May 2025
- Published by Elsevier in Social Sciences & Humanities Open
- Vol. 11
Open AccessAvoided emissions through reuse: The contribution of ReStore in Trondheim's circular economy transition
- Open Access
- 10 January 2025
- Published by Ubiquity Press, Ltd. in Buildings and Cities
- Vol. 6 (1)
Western Asian and Northern African residential building stocks: archetype analysis
Buildings are significant consumers of natural and manufactured resources, especially in rapidly urbanizing regions. This study presents the first comprehensive analysis of residential building stocks in 19 countries across these Western Asia and Northern Africa (WANA), utilizing an archetype-based, bottom-up, stock-modeling approach. By integrating life-cycle assessment (LCA) with building energy models via BuildME, the study estimates the material, energy, and annualized life-cycle greenhouse gas emissions (ALCGHGE) intensities associated with various residential building types. These findings provide critical insights into the resource use and environmental impact of residential buildings in WANA, considering the region’s diverse climatic, architectural, and economic contexts. Significant variations are found in both total residential emissions and the proportion attributed to material-related versus use-phase-related sources. The analysis reveals that 64% of total annualized life-cycle emissions from residential buildings stem from operational energy use, e.g. 90% in Qatar and 38% in Georgia. Oman has the highest per capita annualized material use at 3 t/capita/year, while Kuwait shows the highest total per capita emissions at 5 tCO2eq/capita/year, significantly outpacing countries such as Morocco and Syria (0.7 and 0.5 tCO2eq/capita/year, respectively). Although single-family houses are the least emission-intensive per m2, they exhibit the highest emissions per dwelling unit. Policy relevance The findings hold significant implications for policymakers in WANA as they address the environmental impacts of rapid urbanization and growing residential building stocks. The findings emphasize the urgent need for targeted policies that focus on reducing energy use in residential buildings and for incorporating targets into nationally determined contributions, particularly in energy-intensive countries such as Qatar and Kuwait. Policymakers should prioritize the development of energy-efficient building codes, incentivize the adoption of low-emission technologies, and promote sustainable building practices that minimize material use. The study also underscores the importance of considering both per dwelling unit and per m2 emissions in policy frameworks, especially in countries such as Oman and Kuwait, where large, energy-intensive homes dominate. By leveraging the region-specific insights provided by this research, governments can design more effective strategies for reducing ALCGHGE and resource use in residential sectors, contributing to broader climate change-mitigation efforts.
- 10 January 2025
- Published by Ubiquity Press, Ltd. in Buildings and Cities
- Vol. 6 (1)
Open AccessWestern Asian and Northern African residential building stocks: archetype analysis
Buildings are significant consumers of natural and manufactured resources, especially in rapidly urbanizing regions. This study presents the first comprehensive analysis of residential building stocks in 19 countries across these Western Asia and Northern Africa (WANA), utilizing an archetype-based, bottom-up, stock-modeling approach. By integrating life-cycle assessment (LCA) with building energy models via BuildME, the study estimates the material, energy, and annualized life-cycle greenhouse gas emissions (ALCGHGE) intensities associated with various residential building types. These findings provide critical insights into the resource use and environmental impact of residential buildings in WANA, considering the region’s diverse climatic, architectural, and economic contexts. Significant variations are found in both total residential emissions and the proportion attributed to material-related versus use-phase-related sources. The analysis reveals that 64% of total annualized life-cycle emissions from residential buildings stem from operational energy use, e.g. 90% in Qatar and 38% in Georgia. Oman has the highest per capita annualized material use at 3 t/capita/year, while Kuwait shows the highest total per capita emissions at 5 tCO2eq/capita/year, significantly outpacing countries such as Morocco and Syria (0.7 and 0.5 tCO2eq/capita/year, respectively). Although single-family houses are the least emission-intensive per m2, they exhibit the highest emissions per dwelling unit. Policy relevance The findings hold significant implications for policymakers in WANA as they address the environmental impacts of rapid urbanization and growing residential building stocks. The findings emphasize the urgent need for targeted policies that focus on reducing energy use in residential buildings and for incorporating targets into nationally determined contributions, particularly in energy-intensive countries such as Qatar and Kuwait. Policymakers should prioritize the development of energy-efficient building codes, incentivize the adoption of low-emission technologies, and promote sustainable building practices that minimize material use. The study also underscores the importance of considering both per dwelling unit and per m2 emissions in policy frameworks, especially in countries such as Oman and Kuwait, where large, energy-intensive homes dominate. By leveraging the region-specific insights provided by this research, governments can design more effective strategies for reducing ALCGHGE and resource use in residential sectors, contributing to broader climate change-mitigation efforts.
- Open Access
- 15 February 2024
- Published by Ubiquity Press, Ltd. in Buildings and Cities
- Vol. 5 (1) , 521-539
Modelling Nigerian residential dwellings: bottom-up approach and scenario analysis
Nigeria’s residential buildings consume a substantial amount of the country’s energy, so achieving a net-zero building sector with a rapidly growing population is a key challenge. To bridge the gap in research at a national level and support Nigeria’s commitment to an unconditional 20% reduction in emissions by 2030, this study develops bottom-up archetype models of different residential building typologies to estimate the energy and material use of Nigerian residential buildings. This creates an overview of the residential stock and how different archetypes perform. The study calculates a baseline energy and material use of Nigeria’s residential building stock using the BuildME tool and converts these data into CO2 emissions using a life-cycle assessment. Scenarios are modelled for 2020. Nigeria’s residential dwellings use approximately 0.3 kt of material per dwelling over a lifetime of 50 years and 2404 kWh/yr of energy per dwelling. Annualised, dwellings emit 2500 kgCO2-eq per dwelling due to material and energy use. Scenarios proposed for meeting Nigeria’s emissions targets will require improved energy efficiency, decarbonising the building envelope through a shift in construction materials and decarbonising grid electricity. Policy relevance This study provides a comprehensive analysis of the energy and material use of residential buildings in Nigeria, focusing on achieving the country’s commitment to a 20% reduction in emissions by 2030. It employs a bottom-up approach to model energy and material use, revealing the peculiarities of the dwelling stock across Nigeria’s four climatic zones. The study explores the implications of different policy scenarios on sustainable housing. The research suggests that meeting Nigeria’s emissions targets requires improved energy efficiency, a shift in construction materials and decarbonisation of grid electricity. It also highlights the potential benefits of a policy switch to materials such as timber, earthen blocks, adobe bricks and clay, which could significantly reduce construction-related emissions. These changes could improve the quality of life of households in Nigeria, combat climate change on a global scale and bring economic advantages to Nigeria.
- 15 February 2024
- Published by Ubiquity Press, Ltd. in Buildings and Cities
- Vol. 5 (1) , 521-539
Open AccessModelling Nigerian residential dwellings: bottom-up approach and scenario analysis
Nigeria’s residential buildings consume a substantial amount of the country’s energy, so achieving a net-zero building sector with a rapidly growing population is a key challenge. To bridge the gap in research at a national level and support Nigeria’s commitment to an unconditional 20% reduction in emissions by 2030, this study develops bottom-up archetype models of different residential building typologies to estimate the energy and material use of Nigerian residential buildings. This creates an overview of the residential stock and how different archetypes perform. The study calculates a baseline energy and material use of Nigeria’s residential building stock using the BuildME tool and converts these data into CO2 emissions using a life-cycle assessment. Scenarios are modelled for 2020. Nigeria’s residential dwellings use approximately 0.3 kt of material per dwelling over a lifetime of 50 years and 2404 kWh/yr of energy per dwelling. Annualised, dwellings emit 2500 kgCO2-eq per dwelling due to material and energy use. Scenarios proposed for meeting Nigeria’s emissions targets will require improved energy efficiency, decarbonising the building envelope through a shift in construction materials and decarbonising grid electricity. Policy relevance This study provides a comprehensive analysis of the energy and material use of residential buildings in Nigeria, focusing on achieving the country’s commitment to a 20% reduction in emissions by 2030. It employs a bottom-up approach to model energy and material use, revealing the peculiarities of the dwelling stock across Nigeria’s four climatic zones. The study explores the implications of different policy scenarios on sustainable housing. The research suggests that meeting Nigeria’s emissions targets requires improved energy efficiency, a shift in construction materials and decarbonisation of grid electricity. It also highlights the potential benefits of a policy switch to materials such as timber, earthen blocks, adobe bricks and clay, which could significantly reduce construction-related emissions. These changes could improve the quality of life of households in Nigeria, combat climate change on a global scale and bring economic advantages to Nigeria.
- Open Access
- 20 May 2019
- Published by Science Publishing Group in International Journal of Statistical Distributions and Applications
- Vol. 5 (1) , 10-14
Fitting the Ehrenberg’s Law-Like Equation Using the Age, Weight and Height of Secondary School Students
The Ehrenberg’s law like equation is deemed to fit (within minor error) universally among children aged 11 – 17. This paper adopts this equation to confirm or deny the universal applicability based on selected schools in South-South region in Nigeria which is believed to be environmentally degraded. Data on Age, Sex and anthropometric measures (weight and height) of the cohort in public and private schools were used to fit the model. After the data were pooled from the public and private school, Microsoft Excel Package was used to test how different conditions may influence the fit of the model to the data. The conditions considered were: Gender and Social class (determined by school type), hence there were five different data classifications. Results obtained showed that although the average deviation recorded for female students fell out of the expected limit of ±0.01 although marginally by another +0.01; all other subsets of the data set were found to fit the given equation appropriately. This goes to show that irrespective of gender or social class, provided the students are within the specified age bracket, the Ehrenberg's law like equation will be a good model for use. This is equally verified using the test of significance as well as the test for equality of the regression models.
- 20 May 2019
- Published by Science Publishing Group in International Journal of Statistical Distributions and Applications
- Vol. 5 (1) , 10-14
Open AccessFitting the Ehrenberg’s Law-Like Equation Using the Age, Weight and Height of Secondary School Students
The Ehrenberg’s law like equation is deemed to fit (within minor error) universally among children aged 11 – 17. This paper adopts this equation to confirm or deny the universal applicability based on selected schools in South-South region in Nigeria which is believed to be environmentally degraded. Data on Age, Sex and anthropometric measures (weight and height) of the cohort in public and private schools were used to fit the model. After the data were pooled from the public and private school, Microsoft Excel Package was used to test how different conditions may influence the fit of the model to the data. The conditions considered were: Gender and Social class (determined by school type), hence there were five different data classifications. Results obtained showed that although the average deviation recorded for female students fell out of the expected limit of ±0.01 although marginally by another +0.01; all other subsets of the data set were found to fit the given equation appropriately. This goes to show that irrespective of gender or social class, provided the students are within the specified age bracket, the Ehrenberg's law like equation will be a good model for use. This is equally verified using the test of significance as well as the test for equality of the regression models.