Lei Wang
Research Subjects
Lei Wang has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Xiao-Hua Wang
School of Physics, University of Electronic Science and Technology of China, Chengdu, China
2 shared publications - Bo Yan
School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China
1 shared publication - Filippo Costa
Department of Information Engineering, University of Pisa, Pisa, Italy
1 shared publication - Giuliano Manara
Department of Information Engineering, University of Pisa, Pisa, Italy
1 shared publication - Hong-Yu Ren
School of Physics, University of Electronic Science and Technology of China, Chengdu, China
1 shared publication - Jie Yang
School of Electronic Science and Engineering University of Electronic Science and Technology of China Chengdu China
1 shared publication
Latest Publications
- 14 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (4) , 3501-3513
Integrated Inverse Design of Antenna Superstrate for Radiation and Scattering Problems
A multi-functional integrated inverse-design method (MFI-IDM) of antenna superstrate is proposed to achieve the desired radiation pattern (DRP) and low radar cross section (RCS) of antenna by employing Born iterative-type methods. When the internal and external incident sources of the antenna are known, the proposed method first designs the corresponding far-field total and scattering fields of the superstrate based on physical definitions derived from the DRP and RCS requirements. Then, based on the designated domain of the antenna superstrate, its electromagnetic parameters can be reconstructed with the help of the inverse scattering algorithms. As a result, the antenna with inverse-designed superstrate can be modeled and finally meets the expected requirements of both high radiation performance and low scattering characteristics. Two schemes of multi-functional integrated design, involving single and multiple superstrates, are introduced. Additionally, a stepwise approximation strategy and a progressive design with multi-superstrate are proposed to avoid the divergence problem of inverse scattering algorithm. Based on two-dimensional numerical calculations, the inverse-designed dielectric-type superstrates are further extended to the applications of three-dimensional (3D) antennas. By dielectric equivalence, the designed dielectric-type superstrate was fabricated by using the 3D printing technology. The effectiveness of the proposed method is well validated by the full-wave simulations and measurements. When compared with other similar antennas, the final antenna with inverse-designed superstrate shows good electrical performance, achieving a measured 81° flat-topped beamwidth and 12.5 dB bistatic RCS reduction. Different from the traditional separated forward methods and single-objective inverse-design method, the proposed method efficiently completes the multi-functional inverse-design within a framework, thereby overcoming the limitations of traditional design method for multi-functional antennas.
- 14 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (4) , 3501-3513
Integrated Inverse Design of Antenna Superstrate for Radiation and Scattering Problems
A multi-functional integrated inverse-design method (MFI-IDM) of antenna superstrate is proposed to achieve the desired radiation pattern (DRP) and low radar cross section (RCS) of antenna by employing Born iterative-type methods. When the internal and external incident sources of the antenna are known, the proposed method first designs the corresponding far-field total and scattering fields of the superstrate based on physical definitions derived from the DRP and RCS requirements. Then, based on the designated domain of the antenna superstrate, its electromagnetic parameters can be reconstructed with the help of the inverse scattering algorithms. As a result, the antenna with inverse-designed superstrate can be modeled and finally meets the expected requirements of both high radiation performance and low scattering characteristics. Two schemes of multi-functional integrated design, involving single and multiple superstrates, are introduced. Additionally, a stepwise approximation strategy and a progressive design with multi-superstrate are proposed to avoid the divergence problem of inverse scattering algorithm. Based on two-dimensional numerical calculations, the inverse-designed dielectric-type superstrates are further extended to the applications of three-dimensional (3D) antennas. By dielectric equivalence, the designed dielectric-type superstrate was fabricated by using the 3D printing technology. The effectiveness of the proposed method is well validated by the full-wave simulations and measurements. When compared with other similar antennas, the final antenna with inverse-designed superstrate shows good electrical performance, achieving a measured 81° flat-topped beamwidth and 12.5 dB bistatic RCS reduction. Different from the traditional separated forward methods and single-objective inverse-design method, the proposed method efficiently completes the multi-functional inverse-design within a framework, thereby overcoming the limitations of traditional design method for multi-functional antennas.
- 30 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (5) , 1493-1497
Recurrent Neural Network-Assisted Truncation of Convolutional Perfectly Matched Layers for FDTD
To improve the efficiency of finite-difference time-domain (FDTD) method for unbounded electromagnetic problems, a truncation method for the convolutional perfectly matched layers (CPMLs) is proposed based on a recurrent neural network (RNN). In this work, the RNN is used to capture the time-marching information in the FDTD, complete the offline training of field components at the truncated CPML interfaces, and predict the field components on the cells of the truncated interfaces at each time step. By using this method, the unknowns are well reduced, which results in an improvement in computational efficiency. Additionally, since some of the CPMLs are preserved, the late-time electromagnetic response is still stable without error accumulation. The proposed method can balance accuracy and efficiency by an optimal truncation position for CPMLs, which is validated by two numerical examples.
- 30 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (5) , 1493-1497
Recurrent Neural Network-Assisted Truncation of Convolutional Perfectly Matched Layers for FDTD
To improve the efficiency of finite-difference time-domain (FDTD) method for unbounded electromagnetic problems, a truncation method for the convolutional perfectly matched layers (CPMLs) is proposed based on a recurrent neural network (RNN). In this work, the RNN is used to capture the time-marching information in the FDTD, complete the offline training of field components at the truncated CPML interfaces, and predict the field components on the cells of the truncated interfaces at each time step. By using this method, the unknowns are well reduced, which results in an improvement in computational efficiency. Additionally, since some of the CPMLs are preserved, the late-time electromagnetic response is still stable without error accumulation. The proposed method can balance accuracy and efficiency by an optimal truncation position for CPMLs, which is validated by two numerical examples.
- 24 April 2019
- Published by Wiley in International Journal of Numerical Modelling: Electronic Networks, Devices and Fields
- Vol. 33 (3) , e2605
An ultra‐wideband distributed amplifier MMICs based on 0.15‐um GaAs pHEMT technology
A DC‐30GHz ultra‐wideband distributed amplifier based on the 0.15‐um GaAs process is proposed and characterized. The distributed amplifier has nine power amplifying units with a cascode structure. The measured results show that the amplifier has 16‐dB gain in the frequency range of DC‐30GHz. The output power of 1‐dB compression point is 19 dBm at 10 GHz, and the saturated output power is 25 dBm. The chip size is 3× 1.2 mm.
- 24 April 2019
- Published by Wiley in International Journal of Numerical Modelling: Electronic Networks, Devices and Fields
- Vol. 33 (3) , e2605
An ultra‐wideband distributed amplifier MMICs based on 0.15‐um GaAs pHEMT technology
A DC‐30GHz ultra‐wideband distributed amplifier based on the 0.15‐um GaAs process is proposed and characterized. The distributed amplifier has nine power amplifying units with a cascode structure. The measured results show that the amplifier has 16‐dB gain in the frequency range of DC‐30GHz. The output power of 1‐dB compression point is 19 dBm at 10 GHz, and the saturated output power is 25 dBm. The chip size is 3× 1.2 mm.
- 11 December 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 19 (1) , 106-111
Mixing It Up: A Double-Balanced Mixer with Wide RF and IF Bandwidth
This article presents the design details of a wide-band, high-dynamic-range passive gallium arsenide (GaAs) mixer submitted for the Student Design Competition (SDC) held during the IEEE Microwave Theory and Techniques Society (MTT-S) 2017 International Microwave Symposium in Honolulu, Hawaii, this past May. The target of our research was to achieve a wide-band mixer with high dynamic range and zero power consumption. The "High-Dynamic-Range Mixer" SDC was sponsored by Technical Coordination Committee MTT-22.
- 11 December 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 19 (1) , 106-111
Mixing It Up: A Double-Balanced Mixer with Wide RF and IF Bandwidth
This article presents the design details of a wide-band, high-dynamic-range passive gallium arsenide (GaAs) mixer submitted for the Student Design Competition (SDC) held during the IEEE Microwave Theory and Techniques Society (MTT-S) 2017 International Microwave Symposium in Honolulu, Hawaii, this past May. The target of our research was to achieve a wide-band mixer with high dynamic range and zero power consumption. The "High-Dynamic-Range Mixer" SDC was sponsored by Technical Coordination Committee MTT-22.