L. Shustik
Research Subjects
Research Interests
L. Shustik has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Leonid Pogorilyy UkrNDIPVT
Leonid Pogorilyy Ukrainian Scientific Research Institute, 08654 Doslidnitske, Ukraine
16 shared publications - S. Stepchenko16 shared publications
- N. P. Nilova15 shared publications
- S. Sidorenko11 shared publications
- T. Gaidai
L. Pogorilyy UkrNDIPVT
7 shared publications - O. O. Lysak6 shared publications
Latest Publications
- Open Access
- 1 July 2022
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- No. 30(44)
RESEARCH QUALITY DRYING OF CORN GRAIN DRYER MODEL STELA AGRODRY MDB-XN 4/15-SU IN HARD MODE
- 1 July 2022
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- No. 30(44)
Open AccessRESEARCH QUALITY DRYING OF CORN GRAIN DRYER MODEL STELA AGRODRY MDB-XN 4/15-SU IN HARD MODE
- Open Access
- 1 December 2021
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- No. 29(43)
METHODOLOGICAL APPROACHES TO ACCELERATED TESTS OF CRUSHING KNIVES OF GRINDING CATS. COMPARATIVE TESTS OF LOSS OF CUTTING CAPACITY
- 1 December 2021
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- No. 29(43)
Open AccessMETHODOLOGICAL APPROACHES TO ACCELERATED TESTS OF CRUSHING KNIVES OF GRINDING CATS. COMPARATIVE TESTS OF LOSS OF CUTTING CAPACITY
- Open Access
- 1 December 2021
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- No. 29(43)
INVESTIGATION OF THE INFLUENCE OF TRACTOR’S TRACTION CHARACTERISTICS ON THE QUALITY OF GiaRDino DISC HARROW WORK
- 1 December 2021
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- No. 29(43)
Open AccessINVESTIGATION OF THE INFLUENCE OF TRACTOR’S TRACTION CHARACTERISTICS ON THE QUALITY OF GiaRDino DISC HARROW WORK
- 1 June 2021
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- No. 28(42)
Provoking the germination of fallen seeds with spring-finger harrows - an important agronomic method of agrophytocenosis weed control
The purpose of the research is to investigate the quality of spring-finger harrow surface tillage to provoke the germination of carrion depending on the angle of the fingers. Research methods: theoretical – analysis of information resources and research results of spring harrows; laboratory-field – economic tests of the machine with planning of experiment, fixing of agrotechnical indicators; instrumental measurements; mathematical and statistical – processing of the obtained indicators and expert evaluation. Results. Experimental field studies of the quality of surface tillage with a spring-finger harrow were carried out in order to provoke the emergence of winter rapeseed. It was found that the harrow loosens and mulches the top layer of soil well, creating optimal conditions for the germination of weeds and weed seeds. The importance of the agrotechnical measure of field litter management and prospects for the use of spring-finger harrows in the system of soil-protective agriculture is analytically substantiated. Conclusions. The physical parameters obtained as a result of researches of a spring-finger harrow testify that at speed about 20 km / h with increase of an angle of inclination of spring fingers depth of their course increases in 1,6 times from 7,2 cm to 11,3 cm that corresponds to agricultural requirements to spring harrows (4-12 cm). The quality of soil crushing in terms of agronomically valuable aggregates up to 0-25 mm in size increases with satisfactory to excellent values with increasing angle of inclination of the fingers. The results of experimental studies show that the heavy spring-finger harrow Degelman Strawmaster SM 7000-50, in the presence of freshly cut rapeseed stubble of large size and clumps of chaff, provides satisfactory tillage, promoting the germination of rapeseed seeds and improving phytosanitary conditions for future field operations.
- 1 June 2021
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- No. 28(42)
Provoking the germination of fallen seeds with spring-finger harrows - an important agronomic method of agrophytocenosis weed control
The purpose of the research is to investigate the quality of spring-finger harrow surface tillage to provoke the germination of carrion depending on the angle of the fingers. Research methods: theoretical – analysis of information resources and research results of spring harrows; laboratory-field – economic tests of the machine with planning of experiment, fixing of agrotechnical indicators; instrumental measurements; mathematical and statistical – processing of the obtained indicators and expert evaluation. Results. Experimental field studies of the quality of surface tillage with a spring-finger harrow were carried out in order to provoke the emergence of winter rapeseed. It was found that the harrow loosens and mulches the top layer of soil well, creating optimal conditions for the germination of weeds and weed seeds. The importance of the agrotechnical measure of field litter management and prospects for the use of spring-finger harrows in the system of soil-protective agriculture is analytically substantiated. Conclusions. The physical parameters obtained as a result of researches of a spring-finger harrow testify that at speed about 20 km / h with increase of an angle of inclination of spring fingers depth of their course increases in 1,6 times from 7,2 cm to 11,3 cm that corresponds to agricultural requirements to spring harrows (4-12 cm). The quality of soil crushing in terms of agronomically valuable aggregates up to 0-25 mm in size increases with satisfactory to excellent values with increasing angle of inclination of the fingers. The results of experimental studies show that the heavy spring-finger harrow Degelman Strawmaster SM 7000-50, in the presence of freshly cut rapeseed stubble of large size and clumps of chaff, provides satisfactory tillage, promoting the germination of rapeseed seeds and improving phytosanitary conditions for future field operations.
- 1 June 2021
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- No. 28(42)
INFLUENCE OF VARIABLE SPEED INDICATORS OF THE ROTARY HARVEST BZR-9,0 WORK ON THE SUNFLOWER INTERROW TREATMENT PERFORMANCE QUALITY
The purpose of the research is to investigate the quality of inter-row tillage with a rotary harrow depending on the speed regimes in conditions of high soil hardness.Research methods: theoretical - analysis of information resources and research results of rotary harrows; experimental field - testing of the machine in the economic conditions of LLC "Nosivka Agro", village Ploske Nosiv district of Chernihiv region with the fixation of agronomic indicators; instrumental measurements and expert evaluation; statistical - mathematical processing of the obtained indicators.Results.Experimental field studies of the influence of the speed modes of the rotary harrow BZR-9.0 on the efficiency of inter-row cultivation have been carried out.The nomenclature of quality criteria and their achieved level have been established by expert evaluation.It has been analytically established that the rotary harrow mulches the topsoil well, destroys the soil crust, loosens the soil and destroys filamentous weeds, thus creating ideal conditions for the initial development of the plant root system and providing a strong start to their growth. Conclusions. Rotary harrows, widely available on the Ukrainian market, are increasingly in demand as an effective tool for weed control and soil crust destruction in order to improve aeration and water saturation of crops in conditions of increased soil dryness. Theoretical analysis of information sources confirms that needle harrows can be successfully used for continuous and inter-row cultivation of crops in small and medium-sized farms. The physical parameters obtained as a result of experimental researches testify that with change of speed from 9 km / h to 15 km / h the harrow tooth rotary BZR-9,0 in interrow spacing with a protective zone of 11 cm provides qualitative cultivation of soil with a sufficient level of agrotechnical indicators - degree of destruction. soil crust in the range of 91-98 %, and the percentage of damaged plants is at the level of excellent and satisfactory values. There are no undamaged areas of crust with an area of more than 5 cm2, which significantly impede water and air permeability.
- 1 June 2021
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- No. 28(42)
INFLUENCE OF VARIABLE SPEED INDICATORS OF THE ROTARY HARVEST BZR-9,0 WORK ON THE SUNFLOWER INTERROW TREATMENT PERFORMANCE QUALITY
The purpose of the research is to investigate the quality of inter-row tillage with a rotary harrow depending on the speed regimes in conditions of high soil hardness.Research methods: theoretical - analysis of information resources and research results of rotary harrows; experimental field - testing of the machine in the economic conditions of LLC "Nosivka Agro", village Ploske Nosiv district of Chernihiv region with the fixation of agronomic indicators; instrumental measurements and expert evaluation; statistical - mathematical processing of the obtained indicators.Results.Experimental field studies of the influence of the speed modes of the rotary harrow BZR-9.0 on the efficiency of inter-row cultivation have been carried out.The nomenclature of quality criteria and their achieved level have been established by expert evaluation.It has been analytically established that the rotary harrow mulches the topsoil well, destroys the soil crust, loosens the soil and destroys filamentous weeds, thus creating ideal conditions for the initial development of the plant root system and providing a strong start to their growth. Conclusions. Rotary harrows, widely available on the Ukrainian market, are increasingly in demand as an effective tool for weed control and soil crust destruction in order to improve aeration and water saturation of crops in conditions of increased soil dryness. Theoretical analysis of information sources confirms that needle harrows can be successfully used for continuous and inter-row cultivation of crops in small and medium-sized farms. The physical parameters obtained as a result of experimental researches testify that with change of speed from 9 km / h to 15 km / h the harrow tooth rotary BZR-9,0 in interrow spacing with a protective zone of 11 cm provides qualitative cultivation of soil with a sufficient level of agrotechnical indicators - degree of destruction. soil crust in the range of 91-98 %, and the percentage of damaged plants is at the level of excellent and satisfactory values. There are no undamaged areas of crust with an area of more than 5 cm2, which significantly impede water and air permeability.
- 1 June 2021
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- No. 28(42)
CROSSKILL AND STAR-WHEELED ROLLERS. FUNCTIONAL AND DYNAMIC TESTS
Experimental field research of crosskill and star-wheeled rollers similar by design provides their developers and users with information on understanding their design and functional features. The purpose of the research is to compare the functional features of crosskill and star-wheeled rollers according to the criteria of clods breaking effect, compacting action, resistance to sticking in the range of pre-sowing and surface tillage depth. Methods and materials. Dynamic tests involved the study of three types of rollers. The research hypothesis assumed that the selected criteria for evaluating the work of rollers (intensity of breaking of clods, compacting action of rollers, intensity of bottom compaction and performance of rollers at high soil moisture) depend on roller pressure and different speed regimes, as they are derived from the shape of work surfaces. Sub-criteria studies were supposed to be carried out on the same type of soil: clods breaking characteristics on dry W = (10… 12) %, compacting effect on physically mature soil W = (15… 20) %, efficiency at high humidity - W = (25… 27) %. Evaluation of soil characteristics was performed by thermostatic-weight method according to the generally accepted method of "cutting ring" [Kaczynski NA, 1947], according to the volume of the cylinder 100 cm3. To determine the intensity of bottom compaction used the methodology and technical means of L. Pogorilyy UkrNDIPVT development. Statistical analysis of experimental data was performed by the method of analysis of variance according to [Dospekhov, 1985] and interpreted by standard computer programs Excel in the form of graphs. Results. The intensity of clods breaking with a classic roller is the lowest and depends on the speed of movement. The intensity of breaking by the modernized roller is approximately 1.1 times higher and with increasing speed is almost stable. The intensity of clods breaking by a specialized roller is the highest and almost (10...20) %, respectively, exceeds the previous two rollers and does not significantly depend on the increase in speed. The greatest compaction of the soil (the height of the layer to which the pre-prepared soil asked after the passage of the roller) is characteristic of a specialized roller, which is almost (1.5…1.7) times higher than the classic and modernized, respectively. Depending on the depth of pre-tillage (5…10) cm, compaction by rollers varies approximately twice. The greatest intensity of compaction of a bottom is provided by the specialized roller, and modernized and classical condense accordingly in (1,2…1,4) times below. The specialized roller sticks the fastest, which is facilitated by the 4-tier arrangement of working surfaces and their maximum in comparison with others contact with the ground. Sticking of the modernized roller surface is as that of the specialized. The classic roller surface remains clean for the longest time. Conclusions. The classic roller compacts both the upper and lower horizons of the soil well enough, brings little moisture to the surface, has a medium clods breaking effect, can be recommended for a wide range of works, but its primary purpose is cultivating after sowing; as a compromise it can be used for pre-sowing tillage with good quality indicators. The upgraded roller compacts the top layer of the soil well, carries away little moisture, mulches the surface, distributes the effort well at different depths of cultivation and can be recommended primarily for pre-sowing tillage; as a compromise solution can be used after sowing with good quality indicators. Specialized roller – star-wheeled, has good penetrating ability, works most actively, providing the best clods breaking effect, slightly carries away wet horizons on the surface; can be recommended for leveling and use on the soil after its main cultivation. Each of the studied rollers can be used to some extent in all these technological operations, but the best result will be achieved taking into account their characteristics, type and period of execution.
- 1 June 2021
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- No. 28(42)
CROSSKILL AND STAR-WHEELED ROLLERS. FUNCTIONAL AND DYNAMIC TESTS
Experimental field research of crosskill and star-wheeled rollers similar by design provides their developers and users with information on understanding their design and functional features. The purpose of the research is to compare the functional features of crosskill and star-wheeled rollers according to the criteria of clods breaking effect, compacting action, resistance to sticking in the range of pre-sowing and surface tillage depth. Methods and materials. Dynamic tests involved the study of three types of rollers. The research hypothesis assumed that the selected criteria for evaluating the work of rollers (intensity of breaking of clods, compacting action of rollers, intensity of bottom compaction and performance of rollers at high soil moisture) depend on roller pressure and different speed regimes, as they are derived from the shape of work surfaces. Sub-criteria studies were supposed to be carried out on the same type of soil: clods breaking characteristics on dry W = (10… 12) %, compacting effect on physically mature soil W = (15… 20) %, efficiency at high humidity - W = (25… 27) %. Evaluation of soil characteristics was performed by thermostatic-weight method according to the generally accepted method of "cutting ring" [Kaczynski NA, 1947], according to the volume of the cylinder 100 cm3. To determine the intensity of bottom compaction used the methodology and technical means of L. Pogorilyy UkrNDIPVT development. Statistical analysis of experimental data was performed by the method of analysis of variance according to [Dospekhov, 1985] and interpreted by standard computer programs Excel in the form of graphs. Results. The intensity of clods breaking with a classic roller is the lowest and depends on the speed of movement. The intensity of breaking by the modernized roller is approximately 1.1 times higher and with increasing speed is almost stable. The intensity of clods breaking by a specialized roller is the highest and almost (10...20) %, respectively, exceeds the previous two rollers and does not significantly depend on the increase in speed. The greatest compaction of the soil (the height of the layer to which the pre-prepared soil asked after the passage of the roller) is characteristic of a specialized roller, which is almost (1.5…1.7) times higher than the classic and modernized, respectively. Depending on the depth of pre-tillage (5…10) cm, compaction by rollers varies approximately twice. The greatest intensity of compaction of a bottom is provided by the specialized roller, and modernized and classical condense accordingly in (1,2…1,4) times below. The specialized roller sticks the fastest, which is facilitated by the 4-tier arrangement of working surfaces and their maximum in comparison with others contact with the ground. Sticking of the modernized roller surface is as that of the specialized. The classic roller surface remains clean for the longest time. Conclusions. The classic roller compacts both the upper and lower horizons of the soil well enough, brings little moisture to the surface, has a medium clods breaking effect, can be recommended for a wide range of works, but its primary purpose is cultivating after sowing; as a compromise it can be used for pre-sowing tillage with good quality indicators. The upgraded roller compacts the top layer of the soil well, carries away little moisture, mulches the surface, distributes the effort well at different depths of cultivation and can be recommended primarily for pre-sowing tillage; as a compromise solution can be used after sowing with good quality indicators. Specialized roller – star-wheeled, has good penetrating ability, works most actively, providing the best clods breaking effect, slightly carries away wet horizons on the surface; can be recommended for leveling and use on the soil after its main cultivation. Each of the studied rollers can be used to some extent in all these technological operations, but the best result will be achieved taking into account their characteristics, type and period of execution.
- 25 December 2020
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- No. 27(41)
Study of the effectiveness of the applicator DRAGON 6000 for application of liquid CAS fertilizers in resource-saving technology
The purpose of research. Analysis of the advantages and determination of the efficiency of machines for subsoil application of liquid nitrogen fertilizers in resource-saving technologies by evaluating the quality of the DRAGON 6000 applicator. Research methods: theoretical (analysis and synthesis of information resources); experimental field; statistical (mathematical processing of research results) according to generally accepted methods. Results. Experimental studies of the influence of the speed modes of the injector wheel of the DRAGON 6000 applicator for application of liquid nitrogen fertilizers CAS on the quality of the technological process were carried out. It is established that during radical fertilization with liquid fertilizers of corn crops with a row spacing of 70 cm the unit is able to provide a daily yield of 120 hectares in 16-row performance and projected 180 ha - in 24-row, provided proper organization of work and staff training. It is noted that in the conditions of growth of prices for mineral fertilizers and climate change introduction of ecological approaches and resource-saving technology of entering CAS on the basis of the DRAGON 6000 applicator is an urgent task which will allow to compete successfully in the world market. Conclusions. Analytical review of domestic and foreign information resources confirms that the technology of subsoil application of liquid mineral fertilizers, in particular urea-ammonia mixtures (CAS), compared with the application of dry and other liquid fertilizers, is becoming more widespread due to better efficiency, which is a derivative of plant nutrition, rational positioning of fertilizers at the required depth, minimization of evaporation losses, improved drought resistance in the cultivation of crops, and also has significant benefits by reducing losses of active substance, ease of adjustment and management of the work process. Studies have confirmed the possibility of providing the presented design of the machine a constant depth of penetration of needles into the soil with a wide range of humidity and different speeds, as well as the ability to choose rational protection zone for cultivation of corn plants without damage to achieve acceptable efficiency of liquid fertilizers. LLC "ROPA-UKRAINE" presents to the market to consumers the applicator of the Ukrainian production DRAGON 6000 which passed production check on the area of 500 hectares during continuous entering of liquid fertilizers of CAS on vegetative plants of wheat and in the course of interrow (radical) entering of CAS on corn crops. 1100 hectares. With a change of speed in the range (5… 10) km / h, in difficult conditions of work at excess soil moisture, the DRAGON 6000 applicator stably provides depth of entering into soil of needles 6 cm long on depth of 4,9 cm in a protective zone on distance 5 cm from the stems. Under these conditions, the fixation of fertilizers is high quality, and damage to plants is not observed. According to the results of experimental research, the applicator guarantees high indicators of technological reliability and quality of the technological process, has good transport characteristics and lateral stability when driving on field roads.
- 25 December 2020
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- No. 27(41)
Study of the effectiveness of the applicator DRAGON 6000 for application of liquid CAS fertilizers in resource-saving technology
The purpose of research. Analysis of the advantages and determination of the efficiency of machines for subsoil application of liquid nitrogen fertilizers in resource-saving technologies by evaluating the quality of the DRAGON 6000 applicator. Research methods: theoretical (analysis and synthesis of information resources); experimental field; statistical (mathematical processing of research results) according to generally accepted methods. Results. Experimental studies of the influence of the speed modes of the injector wheel of the DRAGON 6000 applicator for application of liquid nitrogen fertilizers CAS on the quality of the technological process were carried out. It is established that during radical fertilization with liquid fertilizers of corn crops with a row spacing of 70 cm the unit is able to provide a daily yield of 120 hectares in 16-row performance and projected 180 ha - in 24-row, provided proper organization of work and staff training. It is noted that in the conditions of growth of prices for mineral fertilizers and climate change introduction of ecological approaches and resource-saving technology of entering CAS on the basis of the DRAGON 6000 applicator is an urgent task which will allow to compete successfully in the world market. Conclusions. Analytical review of domestic and foreign information resources confirms that the technology of subsoil application of liquid mineral fertilizers, in particular urea-ammonia mixtures (CAS), compared with the application of dry and other liquid fertilizers, is becoming more widespread due to better efficiency, which is a derivative of plant nutrition, rational positioning of fertilizers at the required depth, minimization of evaporation losses, improved drought resistance in the cultivation of crops, and also has significant benefits by reducing losses of active substance, ease of adjustment and management of the work process. Studies have confirmed the possibility of providing the presented design of the machine a constant depth of penetration of needles into the soil with a wide range of humidity and different speeds, as well as the ability to choose rational protection zone for cultivation of corn plants without damage to achieve acceptable efficiency of liquid fertilizers. LLC "ROPA-UKRAINE" presents to the market to consumers the applicator of the Ukrainian production DRAGON 6000 which passed production check on the area of 500 hectares during continuous entering of liquid fertilizers of CAS on vegetative plants of wheat and in the course of interrow (radical) entering of CAS on corn crops. 1100 hectares. With a change of speed in the range (5… 10) km / h, in difficult conditions of work at excess soil moisture, the DRAGON 6000 applicator stably provides depth of entering into soil of needles 6 cm long on depth of 4,9 cm in a protective zone on distance 5 cm from the stems. Under these conditions, the fixation of fertilizers is high quality, and damage to plants is not observed. According to the results of experimental research, the applicator guarantees high indicators of technological reliability and quality of the technological process, has good transport characteristics and lateral stability when driving on field roads.
- 25 December 2020
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- No. 27(41)
ROLLERS OF DIFFERENT CONSTRUCTIONS. ENGINEERING ANALYSIS
Comparative field tests of similar in design ring-spur and gear-spur rollers for soil rolling provide their developers and users with information on the understanding of the design and technological features. The Goal of research – engineering analysis of structures of ring-spur and gear-spur rollers according to the criteria of weight, shape of working surfaces, soil pressure, completeness of compaction, penetrating ability in the range of depth of pre-sowing and surface tillage. Methods and Materials. Engineering analysis involved the study of three types of rollers. The research hypothesis assumed that the combination of weight characteristics of rollers and their geometric shapes of working surfaces in contact with the soil, in statics will provide the inherent properties of each cat (the first stage of research), which will potentially focus on choosing the most acceptable criteria for comparing functional features of rollers. necessary for field research in dynamics (the second stage of research). According to the criteria of static research were selected: penetrating ability (1); soil pressure (2); completeness of compaction of the area (3); direction of clamping forces (4); features of working surfaces (5); the nature of the mounting of solid disks on the shaft (6). Methodologically, the first three criteria required special adaptations (capacities) with the ability to change the height of the soil layer in the range of depths of pre-sowing and sowing tillage. Other criteria were supposed to be carried out by organoleptic evaluation. The study was supposed to be carried out on soil characteristic of the Forest-Steppe zone and homogeneous in fractional composition, to exclude the influence of soil inclusions of different sizes. Evaluation of soil characteristics was performed by thermostatic-weight method, according to the generally accepted method of "cutting ring" [Kaczynski, 1947] with a cylinder volume of 100 cm3. To determine the area of one elementary working surface of the annular disk, the application of a marking grid on its imprint on the surface left in the soil layers hmin, hmid, hmax was used. When determining the pressure on the soil, depending on the height of the treated layer, the marking grid was superimposed on the imprint of several areas of elementary working surfaces, which were fixed on the chord of immersion in the soil of the annular segment. Statistical analysis of experimental data was performed by the method of analysis of variance according to [Dospekhov, 1985] and interpreted by standard computer programs Excel and graphs. Results. According to the physical characteristics (weight and geometric parameters) of the roller combines the proximity of the diameter of the disks, the width of the working surfaces on the edge of the generator, the presence of spurs. The difference lies in the dimensional characteristics that fall on the width of the grip, the presence of aggressive protruding shapes (teeth) in the gear-spur structure. Each roller has an individual layout of elementary work surfaces. This allowed the conditional marking of rollers as "classic", "modernized" and "specialized". The working surfaces of the classic and specialized rollers provide vertical and lateral action of the clamping forces, while the modernized forms them in the vertical direction. These forces for each of the rollers are derived from the orientation of the working surfaces of different configurations (flat narrow, flat wide; a combination of point-focused with trapezoidal). In addition, work surfaces can have a one- or two-level sequence of contact with the soil at a variable depth. It is established that the nature of the attachment of adjacent disks on the shaft can be rigid or movable. Definitions of concepts and their estimation on indicators of pressure, completeness of consolidation, penetrating ability are resulted. Conclusions. According to the indicators of engineering analysis, each of the three rollers is predicted to have its inherent dominant feature for the most effective use in milling, pre-sowing and post-sowing tillage operations. It is determined that the most acceptable criteria for further research in the dynamics of variable speed should be the intensity of crushing lumps, the degree of soil compaction, the intensity of soil compaction, sticking of the working surface of the roller in high humidity, self-cleaning ability. The criteria of further research in dynamics are determined.
- 25 December 2020
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- No. 27(41)
ROLLERS OF DIFFERENT CONSTRUCTIONS. ENGINEERING ANALYSIS
Comparative field tests of similar in design ring-spur and gear-spur rollers for soil rolling provide their developers and users with information on the understanding of the design and technological features. The Goal of research – engineering analysis of structures of ring-spur and gear-spur rollers according to the criteria of weight, shape of working surfaces, soil pressure, completeness of compaction, penetrating ability in the range of depth of pre-sowing and surface tillage. Methods and Materials. Engineering analysis involved the study of three types of rollers. The research hypothesis assumed that the combination of weight characteristics of rollers and their geometric shapes of working surfaces in contact with the soil, in statics will provide the inherent properties of each cat (the first stage of research), which will potentially focus on choosing the most acceptable criteria for comparing functional features of rollers. necessary for field research in dynamics (the second stage of research). According to the criteria of static research were selected: penetrating ability (1); soil pressure (2); completeness of compaction of the area (3); direction of clamping forces (4); features of working surfaces (5); the nature of the mounting of solid disks on the shaft (6). Methodologically, the first three criteria required special adaptations (capacities) with the ability to change the height of the soil layer in the range of depths of pre-sowing and sowing tillage. Other criteria were supposed to be carried out by organoleptic evaluation. The study was supposed to be carried out on soil characteristic of the Forest-Steppe zone and homogeneous in fractional composition, to exclude the influence of soil inclusions of different sizes. Evaluation of soil characteristics was performed by thermostatic-weight method, according to the generally accepted method of "cutting ring" [Kaczynski, 1947] with a cylinder volume of 100 cm3. To determine the area of one elementary working surface of the annular disk, the application of a marking grid on its imprint on the surface left in the soil layers hmin, hmid, hmax was used. When determining the pressure on the soil, depending on the height of the treated layer, the marking grid was superimposed on the imprint of several areas of elementary working surfaces, which were fixed on the chord of immersion in the soil of the annular segment. Statistical analysis of experimental data was performed by the method of analysis of variance according to [Dospekhov, 1985] and interpreted by standard computer programs Excel and graphs. Results. According to the physical characteristics (weight and geometric parameters) of the roller combines the proximity of the diameter of the disks, the width of the working surfaces on the edge of the generator, the presence of spurs. The difference lies in the dimensional characteristics that fall on the width of the grip, the presence of aggressive protruding shapes (teeth) in the gear-spur structure. Each roller has an individual layout of elementary work surfaces. This allowed the conditional marking of rollers as "classic", "modernized" and "specialized". The working surfaces of the classic and specialized rollers provide vertical and lateral action of the clamping forces, while the modernized forms them in the vertical direction. These forces for each of the rollers are derived from the orientation of the working surfaces of different configurations (flat narrow, flat wide; a combination of point-focused with trapezoidal). In addition, work surfaces can have a one- or two-level sequence of contact with the soil at a variable depth. It is established that the nature of the attachment of adjacent disks on the shaft can be rigid or movable. Definitions of concepts and their estimation on indicators of pressure, completeness of consolidation, penetrating ability are resulted. Conclusions. According to the indicators of engineering analysis, each of the three rollers is predicted to have its inherent dominant feature for the most effective use in milling, pre-sowing and post-sowing tillage operations. It is determined that the most acceptable criteria for further research in the dynamics of variable speed should be the intensity of crushing lumps, the degree of soil compaction, the intensity of soil compaction, sticking of the working surface of the roller in high humidity, self-cleaning ability. The criteria of further research in dynamics are determined.
- 1 June 2020
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- No. 26(40)
THE PRODUCTIVITY OF SHORT CROP ROTATION AND STRIP-TILL IN MODERN REALITIES OF CLIMATE CHANGE
?????????Ͳ??? ???????????ֲ???? ???????? Ѳ???̲͠?? ????????? ????????? ? ???????? ???˲?? ?˲???????? ?̲?
- 1 June 2020
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- No. 26(40)
THE PRODUCTIVITY OF SHORT CROP ROTATION AND STRIP-TILL IN MODERN REALITIES OF CLIMATE CHANGE
?????????Ͳ??? ???????????ֲ???? ???????? Ѳ???̲͠?? ????????? ????????? ? ???????? ???˲?? ?˲???????? ?̲?
- 1 December 2019
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- No. 25(39)
Functional abilities studies and quality of work criteria of the cultivator T-allAr-2.8H justification (PE "VF POLIMASHPROEKT")
?????????? ?????????? ??????????? ?? ???????????? ??????? ????? ?????? ???????????? T-allAr-2.8? (?? ??? ??˲????????һ)
- 1 December 2019
- Published by Leonid Pogorilyy Ukrainian Scientific Research Institute in Technical and technological aspects of development and testing of new machinery and technologies for agriculture of Ukraine
- No. 25(39)
Functional abilities studies and quality of work criteria of the cultivator T-allAr-2.8H justification (PE "VF POLIMASHPROEKT")
?????????? ?????????? ??????????? ?? ???????????? ??????? ????? ?????? ???????????? T-allAr-2.8? (?? ??? ??˲????????һ)