Mircea Vinatoru

As a renewable and sustainable resource, lignocellulosic biomass serves as a crucial raw material for the production of biofuels, biochemicals, and various value-added products. This paper aims to develop and optimize a mild alkaline treatment of sawdust assisted by ultrasound, along with enzymatic hydrolysis of the pretreated material. The alkaline sonochemical pretreatment emerged as the optimal approach to enhance the susceptibility of cellulose to subsequent enzymatic hydrolysis to improve the yield of reducing sugars. A comparative study was performed using various ultrasonic applicators (horn and bath) and conventional assisted alkaline pretreatment. The ultrasonic-assisted pretreatment revealed a higher delignification of 68% (horn) and 57% (bath) compared with conventional pretreatment. Processes were optimized using a statistical analysis based on a 2³ factorial design. The ratios between sawdust and alkaline solution (R_SL = 0.5–1.5 g/100 mL), US amplitude (A = 20–60%), and working temperature (t = 30–50 °C) were selected as process factors. The optimal operating conditions to maximize the reducing sugar yield (138.15 mg GE/g_substrate) were found as follows: a solid/liquid ratio of R_SL,opt = 1.25 g/100 mL, US amplitude of A_opt = 60%, and pretreatment temperature of t_opt = 50 °C. The overall outcomes clearly confirmed the intensification of delignification by ultrasound-assisted alkaline pretreatment.

Lignocellulosic biomass, an abundant and renewable resource, serves as a crucial raw material for the production of biofuels, biochemicals, and various value-added products. This paper aims to develop and optimize a mild alkaline treatment of sawdust assisted by ultrasound, along with enzymatic hydrolysis of the pretreated material. The sonochemical pretreatment with alkali emerged as the optimal approach to enhance the susceptibility of cellulose to subsequent enzymatic hydrolysis, thereby increasing the yield of reducing sugars. A comparative study was performed using various ultrasonic applicators (horn and bath) and conventional assisted alkaline pretreatment. The ultrasonic assisted pretreatment revealed a higher delignification as 68% (horn) and 57% (bath) comparing with conventional pretreatment. Processes were optimized using a statistical analysis based on a 23 factorial design. The ratio between sawdust and alkanine solution (RSL = 0.5–1.5 g/100 mL), US amplitude (A = 20–60%), and working temperature (t = 30–50 °C) were selected as process factors. The optimal operating conditions to maximize the reducing sugar yield (138.15 mg GE /gsubstrate) were found as following: solid/liquid ratio RSL,opt = 1.25 g/100 mL, US amplitude Aopt = 60%, and and pretreatment temperature topt = 50 °C. The overall outcomes clearly confirmed the intensification of delignification by ultrasound assisted alkaline pretreatment

The move towards environmentally friendly processing has been a driving force for research into green methods for the extraction of bioactive compounds from plant materials. In this study, a green and efficient process for the extraction of β-carotene from sea buckthorn berries through the simultaneous use of ultrasound and microwave, using a novel green solvent, fatty acid ethyl esters (FAEE), is described. For the same extraction time (45 min), the β-carotene content in the extract was significantly increased (according to ANOVA analysis—p < 0.05) by the simultaneous use of ultrasound and microwave, compared with the separate use of these technologies—an increase of 15 and 89% compared with ultrasound-assisted extraction (UAE) and microwave-assisted extraction (MAE), respectively. The resulting extract can be used directly, without further purification, as a food supplement because the solvent itself is safe for consumption. Furthermore, FAEE contains omega-3 and omega-6 fatty acids which add to the health benefits of the extract. When β-carotene is extracted from the plant matrix, it is subjected to degradation due to oxidation, but the addition of the antioxidant vitamin E (13 mg/mL of extract) to the extract extends its stability to more than 90 days at room temperature even when exposed to light. The addition of vitamin E also enhances the health benefits of the extract.

The influence of ultrasound irradiation on the algal biomass productivity as well as its oil content and fatty acids profile, grown in a modified Zarrouk medium, i.e., deproteinized whey waste solution, was investigated. The algal samples (Nannochloris sp. 424-1 microalgae) were grown for 7 days in a thermostated incubator at 28 °C, shaken under continuous light. During this period, the algal biomass was subjected to induced stress by ultrasonic irradiation at different powers and sonication time. The obtained results demonstrate that ultrasound stressing of algae biomass has a positive effect on both the quantity of biomass and the oil obtained, also causing a shift in fatty acid composition by increasing the proportion of C16 and C18 polyunsaturated fatty acids. A low dosage level of exposure to the ultrasound led to algal biomass increase as well as lipid accumulation. For both types of irradiation modes which were investigated, daily and only initial irradiation, the beneficial effect of the ultrasound decreases as the exposure time increases and the excessive sonication becomes detrimental to microalgae growth.