Zoran Miletic
Research Subjects
Zoran Miletic has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Petar J. Grbovic
Innsbruck Power Electronics Laboratory (i-PEL), University of Innsbruck, Innsbruck, Austria
4 shared publications - Andres Tarraso
Austrian Institute of Technology image/svg+xml
3 shared publications - Thierry Meynard
LAPLACE CNRS,Toulouse,FR,F31071
3 shared publications Alvaro Luna
Renewable Electrical Energy Systems (SEER), Technical University of Catalonia, Terrassa, Spain
1 shared publication- Joan Rocabert
Renewable Electrical Energy Systems (SEER), Technical University of Catalonia, Terrassa, Spain
1 shared publication - Jose Ignacio Candela
Renewable Electrical Energy Systems (SEER), Technical University of Catalonia, Terrassa, Spain
1 shared publication
Latest Publications
- 1 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Symetrical Partial Power Rated Converters for PV & BESS Applications
The concept of partial power converter is promising since it might bring significant cost, weight, volume and loss reduction. However, in most cases partial power converters include a transformer to redirect power from one part of the circuit to another. This transformer adds cost, weight, volume and losses and cancels most of the gains promised by the partiality concept. In this paper a Symmetrical Partial Power Processing Converter allowing the regulation of currents in a multistring system is described and analyzed, its main properties are explained and an example of application for PV or battery storage system is presented.
- 1 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Symetrical Partial Power Rated Converters for PV & BESS Applications
The concept of partial power converter is promising since it might bring significant cost, weight, volume and loss reduction. However, in most cases partial power converters include a transformer to redirect power from one part of the circuit to another. This transformer adds cost, weight, volume and losses and cancels most of the gains promised by the partiality concept. In this paper a Symmetrical Partial Power Processing Converter allowing the regulation of currents in a multistring system is described and analyzed, its main properties are explained and an example of application for PV or battery storage system is presented.
- 20 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Transformerless Partial Voltage Converters for PV-BESS Plants
The concept of partial power converter is promising since it might bring significant cost, weight, volume and loss reduction. However, in most cases partial power converters include a transformer to redirect power from one part of the circuit to another. The transformer adds cost, weight, volume and losses and cancels most of the gains promised by the partiality concept. In this paper a Transformer-Less Partial Voltage Converter allowing the regulation of currents in a multistring system is described and analyzed, its main properties are explained and an example of application for PV or battery storage system is presented.
- 20 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Transformerless Partial Voltage Converters for PV-BESS Plants
The concept of partial power converter is promising since it might bring significant cost, weight, volume and loss reduction. However, in most cases partial power converters include a transformer to redirect power from one part of the circuit to another. The transformer adds cost, weight, volume and losses and cancels most of the gains promised by the partiality concept. In this paper a Transformer-Less Partial Voltage Converter allowing the regulation of currents in a multistring system is described and analyzed, its main properties are explained and an example of application for PV or battery storage system is presented.
- Open Access
- 22 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 102521-102535
Analysis and Design of SiC Three-Phase Four-Wire Five-Level E-Type STATCOM Inverter
In power quality applications, the long-term reliability, low maintenance cost, and low volume and weight of a STATCOM converter are of the paramount importance. The use of the series multi-level power converter topology can significantly improve both volumetric and gravimetric density as well as power conversion efficiency of the STATCOM converter. This paper presents a solution that utilizes the Novel 5 Level E Type topology for the 3-phase, 4-wire STATCOM power quality applications. A comprehensive theoretical analysis and step-by-step design process are presented and discussed in the paper. A proof of the concept prototype (12kVA $3\times 400.230$ V) has been designed, manufactured, and intensively tested and experimentally verified. The experimental results are discussed in detail and compared with state-of-the-art solutions from both academic and industrial sectors. The achieved improvements in volumetric and gravimetric density, along with ultra-high power conversion efficiency and reduced cooling effort, justifies significant benefits of the proposed topology and approach.
- 22 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 102521-102535
Open AccessAnalysis and Design of SiC Three-Phase Four-Wire Five-Level E-Type STATCOM Inverter
In power quality applications, the long-term reliability, low maintenance cost, and low volume and weight of a STATCOM converter are of the paramount importance. The use of the series multi-level power converter topology can significantly improve both volumetric and gravimetric density as well as power conversion efficiency of the STATCOM converter. This paper presents a solution that utilizes the Novel 5 Level E Type topology for the 3-phase, 4-wire STATCOM power quality applications. A comprehensive theoretical analysis and step-by-step design process are presented and discussed in the paper. A proof of the concept prototype (12kVA $3\times 400.230$ V) has been designed, manufactured, and intensively tested and experimentally verified. The experimental results are discussed in detail and compared with state-of-the-art solutions from both academic and industrial sectors. The achieved improvements in volumetric and gravimetric density, along with ultra-high power conversion efficiency and reduced cooling effort, justifies significant benefits of the proposed topology and approach.
- Open Access
- 18 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 100591-100601
Analysis and Design of a Single-Phase Half-Bridge Rectifier With an Active DC Bus
This paper introduces the concept of an active DC. The active DC bus consists of a reduced passive DC bus and an Active Resonant Voltage Balancer (ARVB). The ARVB, operating as a series resonant converter, reduces the DC bus current ripple by injecting balancing current into the DC bus mid-point. This injected current effectively counteracts the fundamental component of the current flowing to the mid-point of the DC bus, resulting in a significant reduction in both the gravimetric and volumetric volume of the DC bus. The proposed concept is thoroughly analyzed through a case study involving a single-phase half-bridge rectifier application. Through theoretical analysis and experimental validation, the usefulness and feasibility of the proposed concept are demonstrated, showing in the presented case study a reduction of the DC bus volume by a factor of 4 at the expense of an increase in losses. The concept represents a viable option in power conversation applications where volume and weight reduction and optimization are required.
- 18 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 100591-100601
Open AccessAnalysis and Design of a Single-Phase Half-Bridge Rectifier With an Active DC Bus
This paper introduces the concept of an active DC. The active DC bus consists of a reduced passive DC bus and an Active Resonant Voltage Balancer (ARVB). The ARVB, operating as a series resonant converter, reduces the DC bus current ripple by injecting balancing current into the DC bus mid-point. This injected current effectively counteracts the fundamental component of the current flowing to the mid-point of the DC bus, resulting in a significant reduction in both the gravimetric and volumetric volume of the DC bus. The proposed concept is thoroughly analyzed through a case study involving a single-phase half-bridge rectifier application. Through theoretical analysis and experimental validation, the usefulness and feasibility of the proposed concept are demonstrated, showing in the presented case study a reduction of the DC bus volume by a factor of 4 at the expense of an increase in losses. The concept represents a viable option in power conversation applications where volume and weight reduction and optimization are required.
- Open Access
- 21 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 76008-76019
Grid Forming Control for Power Converters Based on an Inertial Phase Locked Loop (IPLL)
Inertia emulation is claimed to play a decisive role in the regulation and management of frequency in modern electrical systems. The support offered by renewable energy power plants and distributed generators is key to diminish the rate of change of frequency (RoCoF), as many synchronous generators are being replaced all around the globe. It is a reality that the implementation of the swing equation in the power converter control has been the core of several proposals on grid-forming controllers to emulate inertia. This kind of controller has been heavily studied and integrated in some demonstrators around the world during the last years, providing dynamic inertia support functionalities. However, the need to modify the synchronization strategy in already deployed power units has been one of the key opposition factors on industry, leading to a severe shortcoming on the integration. In contrast to the traditional swing equation implementation this paper presents a lightweight inertial phase-locked loop (IPLL) able to take the most of inertial features introducing minor changes on classical power converter control and synchronization structures. As shown in this work, the straightforward implementation significantly reduces the technological and computational effort compared to other synchronous emulation proposals. Moreover, it integrates not only dynamic inertial response to the converter, but also all grid-forming capacities to the power conversion unit. This modification on the synchronization structure enables the converter to work in grid-following mode in grid-tied applications, and grid-forming in islanded ones. The integration of the proposed IPLL, the stability analysis and a sample of its performance in HIL and experimental environments will be presented in this paper.
- 21 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 76008-76019
Open AccessGrid Forming Control for Power Converters Based on an Inertial Phase Locked Loop (IPLL)
Inertia emulation is claimed to play a decisive role in the regulation and management of frequency in modern electrical systems. The support offered by renewable energy power plants and distributed generators is key to diminish the rate of change of frequency (RoCoF), as many synchronous generators are being replaced all around the globe. It is a reality that the implementation of the swing equation in the power converter control has been the core of several proposals on grid-forming controllers to emulate inertia. This kind of controller has been heavily studied and integrated in some demonstrators around the world during the last years, providing dynamic inertia support functionalities. However, the need to modify the synchronization strategy in already deployed power units has been one of the key opposition factors on industry, leading to a severe shortcoming on the integration. In contrast to the traditional swing equation implementation this paper presents a lightweight inertial phase-locked loop (IPLL) able to take the most of inertial features introducing minor changes on classical power converter control and synchronization structures. As shown in this work, the straightforward implementation significantly reduces the technological and computational effort compared to other synchronous emulation proposals. Moreover, it integrates not only dynamic inertial response to the converter, but also all grid-forming capacities to the power conversion unit. This modification on the synchronization structure enables the converter to work in grid-following mode in grid-tied applications, and grid-forming in islanded ones. The integration of the proposed IPLL, the stability analysis and a sample of its performance in HIL and experimental environments will be presented in this paper.