Kui Feng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kui Feng has a total of 93 co-authors. Here are the top co-authors by number of shared publications:
- Xugang Guo
Shenzhen Key Laboratory of Printed Electronics Department of Materials Science and Engineering Southern University of Science and Technology Shenzhen Guangdong China
24 shared publications Sang Young Jeong
Department of Chemistry, Korea University, Seoul, Republic of Korea
15 shared publicationsSuxiang Ma
Department of Materials Science and Engineering, Southern University of Science and Technology (SUSTech), Shenzhen, China
10 shared publicationsHan Young Woo
Department of Chemistry, Korea University, Seoul, Republic of Korea
9 shared publications- Han Young Woo
Department of Chemistry, Korea University, Seoul, Republic of Korea
8 shared publications Sergio Gámez-Valenzuela
Department of Materials Science and Engineering, Southern University of Science and Technology (SUSTech), Shenzhen, China
6 shared publications
Latest Publications
- 5 May 2026
- Published by Wiley in Small Methods
- Vol. 10 (12) , e70696
Coherent Charge Transport Enhanced by Programmed Electrochemical Doping in Conjugated Polymers
Doping is a cornerstone of semiconductor engineering, yet conventional methods lack precise and uniform control over electronic properties. Here, we present a highly controllable voltage‐programmed electrochemical doping strategy utilizing pulsed gate voltage sequences to orchestrate anion/cation ingress into polymer matrices. This approach, applied to the benchmark semicrystalline p‐type polymer poly(2,5‐bis(3‐tetradecylthiophen‐2‐yl)thieno[3,2‐b]thiophene) and the cyano‐functionalized bithiophene imide dimer (CNI 2 )‐based n‐type polymer, overcomes the limitations of chemical doping by delivering exceptional scalability and tunability, achieving conductivities of up to 685 and 21 S cm − 1 , respectively. These gains arise from optimized electronic properties and enhanced polymer crystallinity enabled by precise voltage‐driven ion intercalation. Notably, this enables a Hall mobility of 2.6 cm 2 V − 1 s − 1 at 300 K and signatures of mesoscopic phase‐coherent transport, as evidenced by the observation of Hall effect signals and positive magnetoresistance associated with weak localization. This study establishes a generalizable framework for engineering charge transport in conjugated polymers for advanced electronic and spintronic applications.
- 5 May 2026
- Published by Wiley in Small Methods
- Vol. 10 (12) , e70696
Coherent Charge Transport Enhanced by Programmed Electrochemical Doping in Conjugated Polymers
Doping is a cornerstone of semiconductor engineering, yet conventional methods lack precise and uniform control over electronic properties. Here, we present a highly controllable voltage‐programmed electrochemical doping strategy utilizing pulsed gate voltage sequences to orchestrate anion/cation ingress into polymer matrices. This approach, applied to the benchmark semicrystalline p‐type polymer poly(2,5‐bis(3‐tetradecylthiophen‐2‐yl)thieno[3,2‐b]thiophene) and the cyano‐functionalized bithiophene imide dimer (CNI 2 )‐based n‐type polymer, overcomes the limitations of chemical doping by delivering exceptional scalability and tunability, achieving conductivities of up to 685 and 21 S cm − 1 , respectively. These gains arise from optimized electronic properties and enhanced polymer crystallinity enabled by precise voltage‐driven ion intercalation. Notably, this enables a Hall mobility of 2.6 cm 2 V − 1 s − 1 at 300 K and signatures of mesoscopic phase‐coherent transport, as evidenced by the observation of Hall effect signals and positive magnetoresistance associated with weak localization. This study establishes a generalizable framework for engineering charge transport in conjugated polymers for advanced electronic and spintronic applications.
- 29 April 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (31) , e21048
Side Chains Override Crystallinity in n‐Type Organic Mixed Conductors
In organic semiconductors, crystallinity is commonly associated with enhanced charge transport. For organic mixed ionic‐electronic conductors (OMIECs), materials at the core of bioelectronic devices, whether higher crystallinity consistently translates into improved performance remains unresolved. Here, we use thermal annealing to control the crystallinity of three electron‐transporting OMIECs bearing either branched or linear ethylene glycol side chains that are used to promote ion transport. Although annealing uniformly enhances crystallinity across all materials, it improves mixed charge transport only in polymers with linear side chains by doubling electronic charge mobility. Specifically, annealed films with branched side chains exhibit reduced mobility and low water uptake, coinciding with a pronounced bipolaron formation, which we uncovered using a combination of in‐operando physicochemical characterization methods. Thermal annealing is also used to sterilize these materials for interfacing with living cells, with the benefit of improved sensor performance. These results reveal that crystallinity can hinder mixed conductivity depending on side‐chain architecture, independent of the backbone chemistry. By challenging the prevailing assumption that crystallinity is universally beneficial for charge transport, this work establishes design rules for developing OMIECs that combine high performance with compatibility for fabrication and sterilization processes involving high temperatures, paving the way for reliable, scalable bioelectronic devices.
- 29 April 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (31) , e21048
Side Chains Override Crystallinity in n‐Type Organic Mixed Conductors
In organic semiconductors, crystallinity is commonly associated with enhanced charge transport. For organic mixed ionic‐electronic conductors (OMIECs), materials at the core of bioelectronic devices, whether higher crystallinity consistently translates into improved performance remains unresolved. Here, we use thermal annealing to control the crystallinity of three electron‐transporting OMIECs bearing either branched or linear ethylene glycol side chains that are used to promote ion transport. Although annealing uniformly enhances crystallinity across all materials, it improves mixed charge transport only in polymers with linear side chains by doubling electronic charge mobility. Specifically, annealed films with branched side chains exhibit reduced mobility and low water uptake, coinciding with a pronounced bipolaron formation, which we uncovered using a combination of in‐operando physicochemical characterization methods. Thermal annealing is also used to sterilize these materials for interfacing with living cells, with the benefit of improved sensor performance. These results reveal that crystallinity can hinder mixed conductivity depending on side‐chain architecture, independent of the backbone chemistry. By challenging the prevailing assumption that crystallinity is universally beneficial for charge transport, this work establishes design rules for developing OMIECs that combine high performance with compatibility for fabrication and sterilization processes involving high temperatures, paving the way for reliable, scalable bioelectronic devices.
- 3 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (6) , 10372-10385
Synergistic Tuning of Doping Efficiency and Charge Transport in n-Type Thermoelectric Polymers via Rational Backbone Design
Despite the growing interest in organic thermoelectrics, n-type polymers generally exhibit lower performance than their p-type counterparts, limiting the development of efficient thermoelectric generators. Herein, we report two new n-type polymers based on cyanothiophene-flanked diketopyrrolopyrrole (CDPP) copolymerized with either diketopyrrolopyrrole (PCDPP-DPP) or dialkoxybithiazole (PCDPP-BTzOR) to investigate the critical yet scarcely explored role of orbital interaction between counits in governing thermoelectric performance. Although PCDPP-BTzOR exhibits a more conformationally locked backbone, higher molecular weight, comparable film crystallinity, and nearly identical LUMO level to PCDPP-DPP, the latter displays markedly superior charge transport and doping response. PCDPP-DPP achieves higher field-effect electron mobility (0.191 vs 0.013 cm2 V-1 s-1) and carrier concentration after n-doping (1.4 vs 1.0 × 1020 spins cm-3), yielding over an order of magnitude higher electrical conductivity (25.71 vs 1.97 S cm-1). These improvements arise from the deliberate tuning of interunit orbital interactions in PCDPP-DPP, which promotes electronic delocalization and mitigates trapping associated with polarized charge-transfer states. Consequently, PCDPP-DPP attains a high power factor of 23.52 μW m-1 K-2 and a promising room-temperature figure of merit of ZT = 0.07. Overall, this work establishes orbital interaction engineering as an effective strategy for designing high-performance n-type thermoelectric polymers.
- 3 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (6) , 10372-10385
Synergistic Tuning of Doping Efficiency and Charge Transport in n-Type Thermoelectric Polymers via Rational Backbone Design
Despite the growing interest in organic thermoelectrics, n-type polymers generally exhibit lower performance than their p-type counterparts, limiting the development of efficient thermoelectric generators. Herein, we report two new n-type polymers based on cyanothiophene-flanked diketopyrrolopyrrole (CDPP) copolymerized with either diketopyrrolopyrrole (PCDPP-DPP) or dialkoxybithiazole (PCDPP-BTzOR) to investigate the critical yet scarcely explored role of orbital interaction between counits in governing thermoelectric performance. Although PCDPP-BTzOR exhibits a more conformationally locked backbone, higher molecular weight, comparable film crystallinity, and nearly identical LUMO level to PCDPP-DPP, the latter displays markedly superior charge transport and doping response. PCDPP-DPP achieves higher field-effect electron mobility (0.191 vs 0.013 cm2 V-1 s-1) and carrier concentration after n-doping (1.4 vs 1.0 × 1020 spins cm-3), yielding over an order of magnitude higher electrical conductivity (25.71 vs 1.97 S cm-1). These improvements arise from the deliberate tuning of interunit orbital interactions in PCDPP-DPP, which promotes electronic delocalization and mitigates trapping associated with polarized charge-transfer states. Consequently, PCDPP-DPP attains a high power factor of 23.52 μW m-1 K-2 and a promising room-temperature figure of merit of ZT = 0.07. Overall, this work establishes orbital interaction engineering as an effective strategy for designing high-performance n-type thermoelectric polymers.
- Open Access
- 12 December 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 11096
n-doping of organic semiconductors catalysed by organometallic complexes
Molecular doping is essential for optimizing carrier concentration, charge mobility, and energy levels of organic semiconductors (OSCs), thereby enhancing device performance. However, efficient n(electron)-type doping remains challenging, as conventional techniques often fail to achieve high doping efficiency with minimal counterion-induced disorder under mild conditions. Here, we present a catalysed n-doping strategy for OSCs using air-stable, cost-effective, and commercially available soluble organometallic complexes, such as Pt(COD)Cl2, which enable rapid n-dopant activation with just 10 s of annealing at 120 oC. This approach demonstrates excellent generality across diverse OSCs, dopants and catalysts, achieving electrical conductivities exceeding 230 S cm-1 with up to 10-fold improvements over existing catalyst-assisted n-doping methods. Importantly, it mitigates counterion-induced structural disorder in doped OSCs, leading to a high power factor of 175 µW m-1 K-2 and thermoelectric figure of merit (ZT) of 0.43 at room temperature for catalytically N-DMBI-doped polymer films. This strategy addresses long-standing challenges in n-doping while unlocking new avenues for next-generation organic electronics.
- 12 December 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 11096
Open Accessn-doping of organic semiconductors catalysed by organometallic complexes
Molecular doping is essential for optimizing carrier concentration, charge mobility, and energy levels of organic semiconductors (OSCs), thereby enhancing device performance. However, efficient n(electron)-type doping remains challenging, as conventional techniques often fail to achieve high doping efficiency with minimal counterion-induced disorder under mild conditions. Here, we present a catalysed n-doping strategy for OSCs using air-stable, cost-effective, and commercially available soluble organometallic complexes, such as Pt(COD)Cl2, which enable rapid n-dopant activation with just 10 s of annealing at 120 oC. This approach demonstrates excellent generality across diverse OSCs, dopants and catalysts, achieving electrical conductivities exceeding 230 S cm-1 with up to 10-fold improvements over existing catalyst-assisted n-doping methods. Importantly, it mitigates counterion-induced structural disorder in doped OSCs, leading to a high power factor of 175 µW m-1 K-2 and thermoelectric figure of merit (ZT) of 0.43 at room temperature for catalytically N-DMBI-doped polymer films. This strategy addresses long-standing challenges in n-doping while unlocking new avenues for next-generation organic electronics.
- 22 October 2025
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 58 (21) , 11745-11755
Cyanothiophene-Flanked Diketopyrrolopyrrole: A New Electron-Deficient Building Block for Unipolar n-Type Polymer Semiconductors
- 22 October 2025
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 58 (21) , 11745-11755
Cyanothiophene-Flanked Diketopyrrolopyrrole: A New Electron-Deficient Building Block for Unipolar n-Type Polymer Semiconductors
- 9 October 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (42) , 38851-38864
One-Step Synthesis of Cyanated Quinoxaline Regioisomers Enables n-Type Polymers with Record Ambient-Processed Thermoelectric Performance
Advancements in organic electronics critically depend on the development of high-performance n-type π-conjugated polymers. However, electron-depleted polymers of this kind exhibiting facile synthesis, excellent processability and good air stability remain rare due to limitations in accessing building blocks meeting these requirements. Here we develop two novel, structurally simple and yet π-extended and highly electron-deficient cyanated building blocks: 2,3-quinoxalinedicarbonitrile (QxCN) and 6,7-quinoxalinedicarbonitrile (CNQx). These units are synthesized in a single-step from low-cost precursors via regioselective cyanation of the weak acceptor quinoxaline. Copolymerization with thiophene-flanked diketopyrrolopyrrole affords two acceptor-acceptor type copolymers TDPP-QxCN and TDPP-CNQx, respectively, exhibiting significantly deeper LUMO levels (∼-3.9 eV) compared to the noncyanated polymer analogue TDPP-Qx (-3.35 eV). In-depth spectroscopic, theoretical, and microstructural analyses reveal that cyanation at the 6,7-positions in TDPP-CNQx suppresses minority carrier effects associated with intramolecular charge transfer in TDPP-QxCN, while promoting excellent conformational adaptability that drives efficient self-assembly into a highly crystalline film with a favorable balance of ordered and disordered domains. This microstructural organization ensures rapid electron transport and efficient dopant diffusion, leading to large field-effect mobilitiesfor TDPP-CNQx (up to 1.3 cm2 V-1 s-1) and unprecedented n-doping efficiency even under air-processed conditions. Consequently, n-doped TDPP-CNQx films exhibit a high n-type electrical conductivity (44.50 S cm-1), excellent power factor (65.16 μW m-1 K-2), and ultralow thermal conductivity (0.10 W m-1 K-1), collectively culminating in a record thermoelectric figure of merit (ZT = 0.20) for solution/ambient-processed films. This performance also surpasses nearly all vacuum-processed counterparts, positioning CNQx as a highly promising building block for next-generation organic electronics.
- 9 October 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (42) , 38851-38864
One-Step Synthesis of Cyanated Quinoxaline Regioisomers Enables n-Type Polymers with Record Ambient-Processed Thermoelectric Performance
Advancements in organic electronics critically depend on the development of high-performance n-type π-conjugated polymers. However, electron-depleted polymers of this kind exhibiting facile synthesis, excellent processability and good air stability remain rare due to limitations in accessing building blocks meeting these requirements. Here we develop two novel, structurally simple and yet π-extended and highly electron-deficient cyanated building blocks: 2,3-quinoxalinedicarbonitrile (QxCN) and 6,7-quinoxalinedicarbonitrile (CNQx). These units are synthesized in a single-step from low-cost precursors via regioselective cyanation of the weak acceptor quinoxaline. Copolymerization with thiophene-flanked diketopyrrolopyrrole affords two acceptor-acceptor type copolymers TDPP-QxCN and TDPP-CNQx, respectively, exhibiting significantly deeper LUMO levels (∼-3.9 eV) compared to the noncyanated polymer analogue TDPP-Qx (-3.35 eV). In-depth spectroscopic, theoretical, and microstructural analyses reveal that cyanation at the 6,7-positions in TDPP-CNQx suppresses minority carrier effects associated with intramolecular charge transfer in TDPP-QxCN, while promoting excellent conformational adaptability that drives efficient self-assembly into a highly crystalline film with a favorable balance of ordered and disordered domains. This microstructural organization ensures rapid electron transport and efficient dopant diffusion, leading to large field-effect mobilitiesfor TDPP-CNQx (up to 1.3 cm2 V-1 s-1) and unprecedented n-doping efficiency even under air-processed conditions. Consequently, n-doped TDPP-CNQx films exhibit a high n-type electrical conductivity (44.50 S cm-1), excellent power factor (65.16 μW m-1 K-2), and ultralow thermal conductivity (0.10 W m-1 K-1), collectively culminating in a record thermoelectric figure of merit (ZT = 0.20) for solution/ambient-processed films. This performance also surpasses nearly all vacuum-processed counterparts, positioning CNQx as a highly promising building block for next-generation organic electronics.
- 4 October 2025
- Published by Wiley in Advanced Materials
- Vol. 38 (3) , e12070
Backbone Tailoring Enables High‐Performance and Stable n‐Type Organic Mixed Ionic‐Electronic Conductors for Synaptic Simulation and Biosensor
High‐performance and stable n‐type organic mixed ionic‐electronic conductors (OMIECs) are crucial for advancing organic electrochemical transistors (OECTs)‐based low‐power complementary circuits and biosensors, yet their development remains a great challenge. Herein, the study presents a series of donor‐acceptor polymers incorporating bithiophene (BTI) and fused BTI derivatives with varying conjugation backbone lengths as acceptors. The mid‐size fused BTI dimer enables polymer PBTI2g‐DTCN with simultaneously improved ion‐uptake capability, film structural order, and ion/electron transport capability. Consequently, an impressive electron mobility of 0.84 cm 2 V −1 s −1 and a record figure‐of‐merit ( µC *) of 287.8 F cm −1 V −1 s −1 are achieved for PBTI2g‐DTCN‐based n‐type conventional OECT in accumulation mode, while the vertical OECTs (vOECTs) attain a state‐of‐the‐art area‐normalized transconductance ( g m,A ) of 71.8 µS µm −2 with remarkable operational stability. Through finely manipulating the channel components, the vOECTs demonstrate dual‐mode operation, switching between non‐volatile and volatile states. In non‐volatile mode, vOECT‐based artificial synapses with excellent ambient stability enable dynamic learning and are employed in convolutional neural networks for image recognition. In volatile mode, they excel in biosensing, monitoring electrocardiography and electromyography signals. These remarkable results demonstrate that backbone tailoring is a powerful strategy for developing high‐performance n‐type OMIECs for synaptic and sensor applications.
- 4 October 2025
- Published by Wiley in Advanced Materials
- Vol. 38 (3) , e12070
Backbone Tailoring Enables High‐Performance and Stable n‐Type Organic Mixed Ionic‐Electronic Conductors for Synaptic Simulation and Biosensor
High‐performance and stable n‐type organic mixed ionic‐electronic conductors (OMIECs) are crucial for advancing organic electrochemical transistors (OECTs)‐based low‐power complementary circuits and biosensors, yet their development remains a great challenge. Herein, the study presents a series of donor‐acceptor polymers incorporating bithiophene (BTI) and fused BTI derivatives with varying conjugation backbone lengths as acceptors. The mid‐size fused BTI dimer enables polymer PBTI2g‐DTCN with simultaneously improved ion‐uptake capability, film structural order, and ion/electron transport capability. Consequently, an impressive electron mobility of 0.84 cm 2 V −1 s −1 and a record figure‐of‐merit ( µC *) of 287.8 F cm −1 V −1 s −1 are achieved for PBTI2g‐DTCN‐based n‐type conventional OECT in accumulation mode, while the vertical OECTs (vOECTs) attain a state‐of‐the‐art area‐normalized transconductance ( g m,A ) of 71.8 µS µm −2 with remarkable operational stability. Through finely manipulating the channel components, the vOECTs demonstrate dual‐mode operation, switching between non‐volatile and volatile states. In non‐volatile mode, vOECT‐based artificial synapses with excellent ambient stability enable dynamic learning and are employed in convolutional neural networks for image recognition. In volatile mode, they excel in biosensing, monitoring electrocardiography and electromyography signals. These remarkable results demonstrate that backbone tailoring is a powerful strategy for developing high‐performance n‐type OMIECs for synaptic and sensor applications.
- Open Access
- 30 September 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-9
Stabilizing dual-phased perovskite towards high performance photovoltaics with enhanced batch stability and consistency
Fabricating high-performance perovskite solar cells (PSCs) with solution processing is conducive to low-cost commercial production, it is therefore rather critical to stabilize perovskite in both solution and solid phases. For this purpose, the speed-up ageing of perovskite solution in air was systematically studied and its severe spontaneous degradation was observed. To address this issue, we introduce 4-(trifluoromethyl) phenylhydrazine (TFPH) to modify the perovskite solution, which presents enhanced storage stability. Consequently, when the modified solution was used to prepare PSCs, we obtained much improved and well consistent power conversion efficiencies (PCEs, ~ 26.0%) regardless of the perovskite solution ageing time, as well as exciting operational stability, which maintains PCE ≥ 92% for 1830 hours. These results are attributed to TFPH’s multifunctionality: a) hydrazine groups inhibit perovskite decomposition by dual-pathway mechanism; b) trifluoromethyl boosts dipole moment, aiding crystallization and strain relaxation; c) impurity reduction and high-quality film jointly lower charge traps. This work substantially assists understanding and modifying perovskite degradation in both solution and solid phases. The developed performance stability and consistency on the TFPH modified device batches is of great significance for commercial production of PSCs.
- 30 September 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-9
Open AccessStabilizing dual-phased perovskite towards high performance photovoltaics with enhanced batch stability and consistency
Fabricating high-performance perovskite solar cells (PSCs) with solution processing is conducive to low-cost commercial production, it is therefore rather critical to stabilize perovskite in both solution and solid phases. For this purpose, the speed-up ageing of perovskite solution in air was systematically studied and its severe spontaneous degradation was observed. To address this issue, we introduce 4-(trifluoromethyl) phenylhydrazine (TFPH) to modify the perovskite solution, which presents enhanced storage stability. Consequently, when the modified solution was used to prepare PSCs, we obtained much improved and well consistent power conversion efficiencies (PCEs, ~ 26.0%) regardless of the perovskite solution ageing time, as well as exciting operational stability, which maintains PCE ≥ 92% for 1830 hours. These results are attributed to TFPH’s multifunctionality: a) hydrazine groups inhibit perovskite decomposition by dual-pathway mechanism; b) trifluoromethyl boosts dipole moment, aiding crystallization and strain relaxation; c) impurity reduction and high-quality film jointly lower charge traps. This work substantially assists understanding and modifying perovskite degradation in both solution and solid phases. The developed performance stability and consistency on the TFPH modified device batches is of great significance for commercial production of PSCs.
- 5 July 2025
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 58 (14) , 7593-7604
Cyano-Functionalized Thienylthiazole Imide-Based n-Type Polymers for High-Performance Organic Electronics
- 5 July 2025
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 58 (14) , 7593-7604
Cyano-Functionalized Thienylthiazole Imide-Based n-Type Polymers for High-Performance Organic Electronics