Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Mingyue Sun has a total of 124 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A hot-working temperature window degrading interfacial bonding strength of hot Co-extruded steel 30CrNi2MoV - superalloy GH4098 bimetallic composite tubes

    by Shengqing Wu, Hexin Wang, Bin Xu, Shaofei Ren, Sheng Liu, Zixuan Zhu, Mingyue Sun

    To address the interfacial bonding failure encountered in large-diameter bimetallic composite tubes (LDBCT) and to establish appropriate heat treatment schedules for bimetallic composite tubes, holding experiments were conducted on the small-diameter bimetallic composite tube (SDBCT) that had achieved sound interfacial bonding. After hot co-extrusion, the diffusion of C from 30CrNi2MoV into GH4098 leads to the precipitation of a large number of secondary MC, M23C6, and M6C carbides in the GH4098 region adjacent to the interface. Among these, M23C6 exerts a dominant influence on the interfacial bonding performance of the composite tube. When the holding temperature window is situated in the 1000-1025 ℃ range, M23C6 transforms into a continuous lamellar morphology along grain boundaries, causing a sharp decline in interfacial bonding strength, with fracture occurring within the carbide precipitation zone in the GH4098 matrix. Rapid cooling of LDBCT after extrusion enabled the interface to quickly pass through the critical 1000-1025 ℃ temperature window, resulting in a marked improvement in interfacial bonding quality. By avoiding the 1000-1025 ℃ holding range in the post-bond heat treatment schedule, the bimetallic composite tube retains excellent base-metal mechanical properties together with an interfacial bonding strength.

  • Open Access

    High-temperature oxidation behavior of 2024 aluminum alloy under limited oxygen condition

    by Xinyu Zhang, Jianqiang Wang, Chao Luan, Shengqing Wu, Zhonghui Ba, Bin Liu, Bin Xu, Mingyue Sun

    The formation and evolution of surface oxides significantly affect interfacial bonding quality during hot compression bonding (HCB) of aluminum alloys. In this work, the high-temperature oxidation behavior of 2024 aluminum alloy at 490℃ under different vacuum levels and oxidation time was systematically investigated using SEM, EPMA, GIXRD, and thermodynamic analysis. The results show that the oxide surface transforms from discontinuous oxide islands into a dense oxide layer, and some step-terrace structures and compression wrinkles gradually present after decreasing vacuum level and increasing oxidation time. The thickness of oxide layer increases and the oxide products gradually evolve from initially formed Al2O3 and MgO toward MgAl2O4-dominated oxides due to continuous elemental diffusion and oxidation reactions. In addition, Al2Cu, Mg/Si-rich, Cu/Mn-rich, and Cu/Fe/Mn-rich phases are present within the oxide layer. These findings provide a comprehensive understanding of the oxidation mechanisms of 2024 aluminum alloy under high-temperature vacuum conditions and offer guidance for optimizing the HCB process parameters to improve interfacial metallurgical bonding.

  • Open Access

    Interfacial nitriding behavior of GH4098/30CrNi2MoV hot-compression bonding joint during thermal insulation treatment in vacuum

    by Shengqing Wu, Xiaoqiang Hu, Hexin Wang, Sheng Liu, Shaofei Ren, Bin Xu, Jiawang Chen, Mingyue Sun

    Hot-compression bonding is a highly promising process to make dissimilar material joints, and a thermal insulation treatment is a commonly employed step following hot compression bonding. This study presents the microstructure evolution at the GH4098/30CrNi2MoV interface after different holding times. Owing to the lower requirement for N concentration, a high density of Ti(C, N) particles form both at the interface and in the GH4098 matrix adjacent to the interface after the holding. AlN tends to precipitate under high N concentration. Owing to the high-energy nature of the interface, AlN precipitates exclusively at the interface. With prolonged holding time, it undergoes growth followed by dissolution. During the holding, the transition layer formed by the diffusion of austenite-stabilizing elements from GH4098 also thickens with increasing holding time.

  • Open Access

    Controlled nanoscale intermetallic layer engineering enables ultrahigh interfacial strength-ductility synergy in maraging steel/Nb/high-entropy alloy composites

    by Qianning Dai, Bijun Xie, Yujie Song, bin Xu, Honglin Zhang, Shaofei Ren, Jibo Li, Zhengwang Zhu, Mingyue Sun, Dianzhong Li

    Interfacial reaction-induced intermetallic compounds (IMCs) are brittle and prone to trigger cracking, severely deteriorating the mechanical performance of composite interfaces. Overcoming IMC-induced embrittlement remains a longstanding challenge in interface design. Here, we counterintuitively leverage the IMCs by inducing their nanocrystallization to achieve ultrahigh interfacial strength-ductility synergy in the 18Ni350/Nb/AlNbTi3Zr1.5 composites. Specifically, a uniform and continuous nanostructured C14-type Fe2Nb interfacial reactive layer (IRL) is engineered at the 18Ni350/Nb interface through the in-situ nanoscale reaction. In contrast to the coarse-grained Fe2Nb IRL characterized by pronounced brittleness, this well-developed nanocrystalline Fe2Nb IRL exhibits superior strength and plasticity by activating grain rotation, stacking fault-mediated slip, and phase transformation-induced plasticity. These deformation mechanisms, originated from the nanostructuring and element doping of Fe2Nb, promote stress relaxation, uniform deformation, and crack blunting during the deformation process of the composite interface, thereby mitigating the brittleness of IMCs. Concurrently, the excellent thermodynamic inter-solubility of Ti, Zr, and Nb fosters a robust metallic bond without forming IMCs at the Nb/AlNbTi3Zr1.5 interface, which enhances compatible deformation by facilitating interfacial dislocation emission and movement, alleviating strain concentration, and preventing premature cracking during mechanical loading. Our findings reveal the significant potential of nanocrystallization engineering in overcoming the interfacial brittleness of IMCs and provide a new strategy for designing ultrahigh-strength dissimilar interfaces.


  • Ce addition - an efroach to enhance thermal stability of γ″ phases in IN718

    by Sheng Liu, Xiaolong Bai, Shengqing Wu, Shaofei Ren, Mingyue Sun, Leigang Zheng, Bin Xu, Xiaoqiang Hu


  • Unveiling relationship between hierarchical microstructure and a more balanced strength–toughness of PH13-8Mo stainless steel

    by Xin-Yang Li, Hong-Lin Zhang, Peng Mi, Hai-Chong Zhou, Bo-Han Shan, Zhao-Hui Liu, Lu-Han Hao, Bin Xu, Ming-Yue Sun

  • New insight into the effect of strain rate on interface healing mechanism in Ni-based superalloy during hot compression bonding

    by Shaofei Ren, He Xiao, Shengqing Wu, Chenqi Zeng, Xiaolong Bai, Sheng Liu, Bin Xu, Chuanyong Cui, Guangcai Ma, Mingyue Sun


  • Open Access

    Aging‐Induced Ductile‐Brittle‐Ductile Transition in High‐Entropy Alloys and its Implications

    by Qianning Dai, Chenzhi Xing, Bijun Xie, Ming‐Hsien Lee, Bin Xu, Shaofei Ren, Yujie Song, Chunyang Wang, Mingyue Sun, Dianzhong Li

    Temper embrittlement, characterized by a dramatic loss of ductility within a narrow temperature window, is ubiquitous in conventional alloys but is not reported in compositionally complex or high‐entropy alloy systems. Here, an unexpected ductile–brittle–ductile transition is discovered in a multiphase high‐entropy alloy (HEA) aged in an intermediate temperature regime. Unlike the classical thermal embrittlement driven by grain boundary effects, this transition originates from the dynamic evolution of local chemical order (LCO) and phase boundary (PB) configurations in HEAs. Aging within the embrittlement‐prone regime enhances chemical ordering, increases the density of ordered domains, and induces jagged PBs, collectively triggering plastic instability and the ductile−to−brittle transition. In contrast, aging outside this regime suppresses excessive ordering and promotes the formation of ductile interphase transition zones, facilitating a brittle−to−ductile recovery. The findings offer new insights into the thermal behavior of HEAs and challenge the established paradigm of thermal embrittlement. These insights provide valuable guidance for the design and processing of high‐performance HEAs, thereby unlocking their potential as advanced high‐temperature structural materials.


  • Open Access

    Cerium Addition Enhances Impact Energy Stability in S355NL Steel by Tailoring Microstructure and Inclusions

    by Jiandong Yang, Bijun Xie, Mingyue Sun

    S355NL structural steel is extensively employed in bridges, ships, and power station equipment owing to its excellent tensile strength, weldability, and low-temperature toughness. However, pronounced fluctuations in its Charpy impact energy at low temperatures significantly compromise the reliability and service life of critical components. In this study, vacuum-induction-melted ingots of S355NL steel containing 0–0.086 wt.% rare earth cerium were prepared. The effects of Ce on microstructures, inclusions, and impact toughness were systematically investigated using optical microscopy (OM), scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and Charpy V-notch testing. The results indicate that appropriate Ce additions (0.0011–0.0049 wt.%) refine the average grain size from 5.27 μm to 4.88 μm, reduce the pearlite interlamellar spacing from 204 nm to 169 nm, and promote the transformation of large-size Al2O3-MnS composite inclusions into fine, spherical, Ce-rich oxysulfides. Charpy V-notch tests at –50 °C reveal that 0.0011 wt.% Ce enhances both longitudinal (269.7 J) and transverse (257.4 J) absorbed energies while minimizing anisotropy (E_t/E_l = 1.01). Conversely, excessive Ce addition (0.086 wt.%) leads to coarse inclusions and deteriorates impact performance. These findings establish an optimal Ce window (0.0011–0.0049 wt.%) for microstructural and inclusion engineering to enhance the low-temperature impact toughness of S355NL steel.