CVChandra Sekhar Vasam

Chandra Sekhar Vasam

*This is an algorithmically generated author record based on publicly available information.

Chandra Sekhar Vasam has a total of 74 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Highly Efficient and Cost-Effective Solid-Base CaO–MgO Catalyst for Knoevenagel Condensation in Water with a Good E-Factor

    by Siddarama Goud Bandalla, Nagaraju Kerru, Swathi Thangalipalli, Vijaykumar Dosarapu, Satyanarayana Mavurapu, Sreekantha B. Jonnalagadda, Chandra Sekhar Vasam

    A cost-effective and eco-compatible 1CaO–1.5MgO binary metal oxide (BMO-1) served as an efficient solid-base catalyst in the Knoevenagel condensation (KC) reaction of a range of aldehydes with active methylene reagents (i) malononitrile and (ii) ethyl cyanoacetate in water at room temperature (RT) to produce α,β-unsaturated compounds in purity with a good E-factor. We also report the ketone–malononitrile KC reaction and salicylaldehyde–malononitrile tandem KC–Michael addition effectively catalyzed by BMO-1. We report the synthesis of 31 α,β-unsaturated compounds that include 9 entirely new compounds under optimized conditions. We compared all catalyzed reactions with the “blank test” due to the high reactivity of active methylene reagents and emphasized the implication of the catalyzed aqueous KC reaction. We deduced the structure–activity relationship (SAR) between the catalyst and substrates, the plausible reaction mechanism, and the turnover frequency (TOF) data of the BMO-1 catalyst. For evaluation, we compared the efficiency of CaO, MgO, and 1.5CaO–1MgO (BMO-2), 1CaO–2MgO (BMO-3), and 1CaO–1MgO (BMO-4) catalysts in a model KC reaction. We prepared the MgO, CaO, BMO-1, and BMO-2 materials via an ultradiluted coprecipitation process and characterized the catalysts by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), CO2 temperature-programmed desorption (CO2-TPD), Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and transmission electron microscopy (TEM) techniques. The superior catalytic activity of BMO-1 is due to its high specific surface area of 97.6 m2/g, surface basicity of 152.4 μmol/g, and smaller particle size of 16.9 nm compared to the other three materials. Catalyst recycling experiments indicate that BMO-1 was stable for up to five cycles for the KC reaction. The BMO-1 spent catalyst analysis indicated the fundamental reason for its deactivation. We also report the optimized conditions for a selected KC reaction for upscaling (100 mmol).


  • Open Access

    Review of Cerium-based Catalysts and Eco-Friendly Oxidants for Chlorine-Free Benzaldehyde Production via Selective Oxidation of Benzyl Alcohol

    by Ganesh Babu Bathula, N.O. Gopal, Narsaiah Chelimela, Mohan Kurra, S. Sharat Kumar Goud, Rameshwar Nimma, Satyanarayana Mavurapu, Jonnalagadda Sb, Chandra Sekhar Vasam

    This review article describes the designing and aptness of diverse range of cerium-based catalysts for the oxidation of benzyl alcohols (Bz-OLs) in producing exclusively benzaldehydes (Bz-ALs) in the presence of eco-friendly oxidants. The discussion highlights the significance of surface and structural properties inherent to cerium-based catalysts, including the abundance of oxygen vacancies, the redox properties of Ce3+/Ce4+ couple, their acid-base characteristics and morphology influence, which play crucial roles in substrate adsorption, reorganization of bonding between substrate and oxidant in promoting selective oxidation reactions. The consolidated data tables (1-4) comprising the best conditions optimized with various ceria based heterogeneous reported so far between the years 2019-2024 is included in the following sections to assess the catalyst design and performance.


  • Open Access

    Organo NHC catalyzed aqueous synthesis of 4β-isoxazole-podophyllotoxins: in vitro anticancer, caspase activation, tubulin polymerization inhibition and molecular docking studies

    by Rajkumar Nagavath, Murali Krishna Thupurani, Vinitha Badithapuram, Ravinder Manchal, Chandra Sekhar Vasam, Narasimha Swamy Thirukovela

    We present, for the first time, the organo-N-heterocyclic carbene (NHC) catalyzed 1,3-dipolar cycloaddition of 4β-O-propargyl podophyllotoxin (1) with nitrile oxides to afford 4β-isoxazolepodophyllotoxin hybrids (6a–n) in aqueous-organic media.


  • Open Access

    Clean Hydrogen Production via Methane Cracking Over Ni Supported on Ceria-silica Catalysts

    by Kandukuri Venkateshwarlu, Manda Kalpana, Aytam Hari Padmasri, Burri Vijayalaxmi, Mavurapu Satyanarayana, Vasam Chandra Sekhar

    At 550 °C and atmospheric pressure, clean hydrogen was produced through CH4 cracking on a ceria modified silica supported Ni catalyst. A high proportion of Ni surface area on 20Ni/2wt%CeO2-SiO2demonstratedbetter H2 yields. The graphitic nature of the deactivated catalyst was established by TEM, XRD analyses and the distinction between ordered and disordered carbon was established by Raman spectroscopy. The high H2 yields produced by 20Ni/2wt%CeO2-SiO2catalyst was explained due to high nickel dispersion and an improved surface area of the nickel as assessed by H2 pulse chemisorption.


  • Open Access

    Selective Synthesis of Imines via Oxidative Coupling of Primary Amines and Oxidation of Secondary Amines by Peroxides and other Competent Oxidants: A Short Review

    by Madhu Ravula, Siddaramagoud Bandalla, Vijaykumar Dosarapu, Mohan Kurra, Satyanarayana Mavurapu, Chandra Sekhar Vasam

    Imines are certainly important constituents of many biomolecules, pharmaceuticals, agrochemicals, and fine chemicals. This review article highlights the standard protocols reported so far for the selective synthesis of imines via catalyzed and non-catalyzed (i) oxidative coupling of primary amines and (ii) oxidation of secondary amines in the presence of some competent/resourceful oxidants other than molecular O2 such as tert-butyl hydroperoxide (TBHP), H2O2, hypervalent iodines, persulfate, hypochlorite, electroactive species and graphene oxide. Indeed, the use of such oxidants offers a cost-effective experimental set-up, operational simplicity and also minimization of by-products. The cooperativity between catalyst, amine substrate, and oxidant is discussed in this review to understand the proposed mechanisms. Three consolidated data tables (Table 1, 2 & 3) are prepared to provide the summary of optimized reaction conditions (type of catalyst, type of oxidant, choice of solvent, amine-to-oxidant ratio, reaction time/temperature, conversion of amine, yield/selectivity of imine) of each article published to have a comparison.


  • Open Access

    Development of Molybdenum oxide Promoted CeO 2 −SiO 2 Mixed‐oxide Catalyst for Efficient Catalytic Oxidation of Benzylamine to N‐Benzylidenebenzylamine

    by Madhu Ravula, Vijaykumar Dosarapu, Siddaramagoud Bandalla, Satyanarayana Mavurapu, Mohan Varkolu, Aswathi Rajeevan, Mallesham Baithy, Sreekantha B. Jonnalagadda, Chandra Sekhar Vasam

    This study explores a rational synthesis of a molybdenum‐promoted Ce−Si mixed oxide catalyst (MoO 3 /CeO 2 −SiO 2 ) to regulate synergies between MoO 3 and SiO 2 dopant on CeO 2 , achieving high selectivity in solvent‐free catalytic oxidative coupling of amines to imines using molecular O 2 as the oxidant. Comparative efficiency tests were conducted with bare CeO 2 , CeO 2 −SiO 2 , and MoO 3 /CeO 2 catalysts. Characterization techniques, including XRD, Raman spectroscopy, N 2 ‐adsorption‐desorption analysis, FTIR, NH 3 −TPD, TEM, and XPS, were employed to assess textural properties, acidic features, promoter and dopant dispersion in CeO 2 lattice, and oxygen defects. Mo/Ce−Si catalyst exhibited superior acidic sites and a higher concentration of Ce 3+ ions (I u /I Total ), indicating increased oxygen vacancies. This catalyst demonstrated exceptional performance in the oxidative coupling of benzylamine, providing higher conversion and selectivity to the corresponding imine. Remarkably, the Mo/Ce−Si catalyst maintained consistent performance over five recycling runs. The catalyst also proved effective for the selective oxidative coupling of various amine substrates with diverse steric and electronic properties. Experimental results confirmed a plausible reaction mechanism within the concise catalyst design.


  • Open Access

    The Emergence of CaO-MgO based Binary Oxides of Alkaline Earth Metals as Cost-effective Solid Base Heterogeneous Catalysts and Sorbents: (A Mini Review)

    by Siddaramagoud Bandalla, Satyanarayana Mavurapu, Sreekantha B Jonnalagadda, Chandra Sekhar Vasam

    The mono or single oxides of alkaline earth metals such as CaO and MgO are a type of non-toxic and non-corrosive solid-base heterogeneous catalysts. Nevertheless, these mono oxide particles can agglomerate and form larger and less active particles at certain temperatures and reduces their catalytic activity. Therefore, the use of thermally stable CaO-MgO binary oxides is recommended. Further, the possible synergistic interactions between two metal centers provides cooperative catalytic behavior to improve catalytic activity compared to their single oxide counterparts. Therefore, the main theme of this review article is to highlight the ability of reported CaO-MgO based alkaline earth binary oxides as cost-effective and efficient solid-base catalysts in variety of organic transformations and to expand their scope in many other unexplored non-asymmetric organic transformations. Literature survey reveals that CMBOs are highly considerable in optimizing recognized organic transformations such as Transesterification, Knoevenagel/Aldol condensations, Isomerization, Oligomerization, Acetylation, Henry reaction, Alcoholysis, Aza-Michael addition, Cracking of Alkanes, H2-production via steam reforming, Photodegradation of organic pollutants and so forth. The literature survey further visualizes that the surface properties of CMBOs such as Brønsted/ Lewis’s basicity, surface area, particle size, structural diversity, Ca: Mg ratios and synergism between Ca and Mg in CMBOs are very useful to promote them as efficient catalysts compared to their single oxide counterparts (pure CaO and pure MgO). The rightness of proposed mechanisms of abovementioned organic reactions by CMBO catalysts is elicited by this review. Moreover, the precursors for CMBOs are inexpensive, highly abundant and eco-compatible. Apart from the catalytic applications, the suitability of the CMBOs in sorption studies including CO2 uptake, ethanol steam reforming, and heavy metal ion removal is also covered.


  • Open Access

    The role of WO x and dopants (ZrO 2 and SiO 2 ) on CeO 2 -based nanostructure catalysts in the selective oxidation of benzyl alcohol to benzaldehyde under ambient conditions

    by Ganeshbabu Bathula, Surjyakanta Rana, Siddaramagoud Bandalla, Vijaykumar Dosarapu, Satyanarayana Mavurapu, Aswathi Rajeevan V. V., Bhaskar Sharma, Sreekantha B. Jonnalagadda, Mallesham Baithy, Chandra Shekar Vasam

    Herein, the efficacy of WO x -promoted CeO 2 –SiO 2 and CeO 2 –ZrO 2 mixed oxide catalysts in the solvent-free selective oxidation of benzyl alcohol to benzaldehyde using molecular oxygen as an oxidant is reported.


  • Development of New 5‐(Oxazol‐2‐yl)Pyrimidine Derivatives with Promising Anticancer Activities

    by Gajula Shyam Kumar, Gaddam Ramesh, Gattu Sridhar, Gangarapu Kiran, Prasanna Sheela Menga, Sambaru Kalyani, Nimma Rameshwar, Boyapati Shireesha, Vasam Chandrasekhar, Mavurapu Satyanarayana

    A novel series of oxazolyl‐pyrimidine derivatives ( 11 a – j ) have been synthesized and structures were confirmed by spectral data. The synthesized compounds were assessed for cytotoxic profile towards human cervix cancer (SiHa), lung cancer (A549), breast cancer (MCF‐7), and colon cancer (Colo‐205) cell lines by employing MTT assay and using etoposide as the positive control. The heteroaryl compounds having the terminal pyridyl ( 11 a ) and thiazolyl ( 11 b ) groups showed superior cytotoxic potency against cervix and lung cancer cell lines and varying methoxy substituted derivatives 11 c – 11 e have excellent to good cytotoxic properties. Compound 11 a and 11 b have IC 50 values in the range of 0.01±0.0034 to 0.17±0.059 μM and 0.10±0.038 to 0.66±0.077 μM respectively in the tested cell lines. The selected compounds 11 a and 11 b were studied by molecular docking to assess the binding interactions, binding energies, and possible mechanisms. The in‐silico ADME properties were calculated and all the compounds have the desired properties of drug‐like molecules. The toxicity results indicate that all the compounds are free from toxicity except 11 j , which has high tumorigenic properties. The optimized structure, energies of frontier molecular orbitals, molecular electrostatic potential, and NLO parameters for compound 11 a were determined using DFT/B3LYP level with a 6‐311++G(d,p) basis set.


  • Open Access

    Generation of Pure H2 through CH4 Cracking Over Ni Supported on ZrO2 Modified Al2O3 Catalyst

    by Venkateshwarlu Kandukuri, Kalpana Manda, Hari Padmasri Aytam, Chandrasekhar Vasam

    Clean hydrogen formation via CH4 cracking on a zirconia-modified alumina support at 550 ºC and atmospheric pressure with constant Ni loading. The increased H2 yields on 20Ni/3 wt.% ZrO2-Al2O3 are explained by the large Ni surface area. TEM and XRD confirmed the deactivated catalyst’s graphitic origin, while Raman spectroscopy helped distinguish between ordered and disordered carbon. As determined by H2 pulse chemisorption, the high H2 yields produced by 20wt%Ni/3 wt.%ZrO2-Al2O3 catalyst is typified by well- ispersed Ni particles and large Ni metal area.