Fengyan Ge
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Fengyan Ge has a total of 67 co-authors. Here are the top co-authors by number of shared publications:
Zaisheng Cai
College of Chemistry and Chemical Engineering, Donghua University, Shanghai, China
15 shared publicationsPeibo Du
National Engineering Research Center for Dyeing and Finishing of Textiles, College of Chemistry and Chemical Engineering, Donghua University, Shanghai, People’s Republic of China
11 shared publications- Zaisheng Cai
National Engineering Research Center for Dyeing and Finishing of Textiles, College of Chemistry and Chemical Engineering, Donghua University, 2999 North Renmin Road, Shanghai 201620, China
9 shared publications Zhiguang Guo
College of Chemistry and Chemical Engineering, DongHua University, Shanghai 201620, China
9 shared publicationsChao Sun
School of Chemical and Process Engineering, University of Leeds, Leeds, UK
7 shared publicationsJinping Zhang
College of Chemistry and Chemical Engineering, DongHua University, Shanghai 201620, China
5 shared publications
Latest Publications
- 15 October 2025
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 10 (10) , 8140-8150
Fluid Domain-Limited Ag Nanoparticles on Janus Fabric for SERS-Based Label-Free Sweat Detection
Flexible wearable biosensors enable dynamic tracking of biomarkers in sweat through noninvasive sampling. Surface-enhanced Raman spectroscopy (SERS) utilizes the "fingerprint" vibrations of molecular vibration spectra to simultaneously analyze multiple substances, facilitating the identification of complex analytes. In this study, we integrated a Janus fabric with efficient wearable moisture management properties with silver (Ag) nanoparticles to develop an SERS sensor for human sweat detection. The hydrophobic side of the Janus fabric was designed to contact the skin, while hydrophobic patterns were printed on the opposite side to enable the efficient enrichment of target molecules. Rapid sweat transport was achieved through a combination of a hydrophilic-hydrophobic interfacial design. The moisture management capability and SERS enhancement mechanism of the platform were further explained through simulation. Moreover, the platform demonstrated the successful detection of real human sweat samples. This work is expected not only to provide a novel approach for the fabrication and preparation of the SERS active fabric with excellent performance but also to promote the theoretical basis and technical support for the research of textile on rapid detection in highly diluted biochemical samples.
- 15 October 2025
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 10 (10) , 8140-8150
Fluid Domain-Limited Ag Nanoparticles on Janus Fabric for SERS-Based Label-Free Sweat Detection
Flexible wearable biosensors enable dynamic tracking of biomarkers in sweat through noninvasive sampling. Surface-enhanced Raman spectroscopy (SERS) utilizes the "fingerprint" vibrations of molecular vibration spectra to simultaneously analyze multiple substances, facilitating the identification of complex analytes. In this study, we integrated a Janus fabric with efficient wearable moisture management properties with silver (Ag) nanoparticles to develop an SERS sensor for human sweat detection. The hydrophobic side of the Janus fabric was designed to contact the skin, while hydrophobic patterns were printed on the opposite side to enable the efficient enrichment of target molecules. Rapid sweat transport was achieved through a combination of a hydrophilic-hydrophobic interfacial design. The moisture management capability and SERS enhancement mechanism of the platform were further explained through simulation. Moreover, the platform demonstrated the successful detection of real human sweat samples. This work is expected not only to provide a novel approach for the fabrication and preparation of the SERS active fabric with excellent performance but also to promote the theoretical basis and technical support for the research of textile on rapid detection in highly diluted biochemical samples.
- 5 June 2025
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 698, 138098
The patterned moisture-wicking and quick-drying fabric for surface enhanced Raman scattering analysis
- 5 June 2025
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 698, 138098
The patterned moisture-wicking and quick-drying fabric for surface enhanced Raman scattering analysis
- 22 May 2025
- Published by Springer Nature in Fibers and Polymers
- Vol. 26 (7) , 2911-2921
Fabrication of Biomass-Based Flame-Retardant Fabrics via Foam Finishing with Co-efficiency of Phytic Acid and Zinc Ions
- 22 May 2025
- Published by Springer Nature in Fibers and Polymers
- Vol. 26 (7) , 2911-2921
Fabrication of Biomass-Based Flame-Retardant Fabrics via Foam Finishing with Co-efficiency of Phytic Acid and Zinc Ions
- 9 April 2025
- Published by Springer Nature in Cellulose
- Vol. 32 (6) , 4023-4038
Enhanced dyeing performance, UV resistance and antioxidant properties of plant dyes based on a binary synergistic effect
- 9 April 2025
- Published by Springer Nature in Cellulose
- Vol. 32 (6) , 4023-4038
Enhanced dyeing performance, UV resistance and antioxidant properties of plant dyes based on a binary synergistic effect
- 16 January 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (4) , 1873-1881
Copper Conductive Ink-Based Pearl Biomimetic Structure for Personal Thermal Management Fabrics
- 16 January 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (4) , 1873-1881
Copper Conductive Ink-Based Pearl Biomimetic Structure for Personal Thermal Management Fabrics
- 14 November 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (47) , 65620-65627
Environmental Cationic Dye/Porous Silica Nanospheres for Printed Cotton Fabrics with Enhanced Coloration Performance
The wastewater of printing and dyeing is difficult to treat due to the degradation resistance of dye and the use of massive chemicals, causing a threat to the ecosystem. Pigment printing of fabrics possesses great advantages like high efficiency and flexible production, but there are some challenges like the risk of color depth and hand feeling due to the large size of the pigment and poor adsorption of light. In order to improve the coloration ability of pigment, herein, a novel kind of cationic dye/porous silica nanospheres were prepared through the adsorption of methylene blue and rhodamine B onto electronegative porous silica nanospheres and applied in printing on woven cotton fabric. It was found that the nanospheres exhibited an average diameter, good color depth, hand feeling, and high image quality for pigment preparation. In comparison with dye-printed fabrics, fabrics with dye/WHMS show higher color depth, resulting from the lower visible light reflectance. Notably, the strong interaction between dyes and hydrophilic porous silica nanospheres (WHMS) facilitates the improvement of absorption efficiency and stability. Meanwhile, the printed fabrics with dye/WHMS demonstrate splendid color fastness. The dry/wet rubbing fastnesses are 4 and 3-4, respectively. Furthermore, dye/WHMS-printed cotton fabrics possess a satisfactory hand feeling and breathability. The consumptions of dye wastewater were reduced, and the printing process was simplified. We think that this work may provide a novel insight into printed textiles with enhanced color effects and alleviate the environmental impact of conventional textile coloration.
- 14 November 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (47) , 65620-65627
Environmental Cationic Dye/Porous Silica Nanospheres for Printed Cotton Fabrics with Enhanced Coloration Performance
The wastewater of printing and dyeing is difficult to treat due to the degradation resistance of dye and the use of massive chemicals, causing a threat to the ecosystem. Pigment printing of fabrics possesses great advantages like high efficiency and flexible production, but there are some challenges like the risk of color depth and hand feeling due to the large size of the pigment and poor adsorption of light. In order to improve the coloration ability of pigment, herein, a novel kind of cationic dye/porous silica nanospheres were prepared through the adsorption of methylene blue and rhodamine B onto electronegative porous silica nanospheres and applied in printing on woven cotton fabric. It was found that the nanospheres exhibited an average diameter, good color depth, hand feeling, and high image quality for pigment preparation. In comparison with dye-printed fabrics, fabrics with dye/WHMS show higher color depth, resulting from the lower visible light reflectance. Notably, the strong interaction between dyes and hydrophilic porous silica nanospheres (WHMS) facilitates the improvement of absorption efficiency and stability. Meanwhile, the printed fabrics with dye/WHMS demonstrate splendid color fastness. The dry/wet rubbing fastnesses are 4 and 3-4, respectively. Furthermore, dye/WHMS-printed cotton fabrics possess a satisfactory hand feeling and breathability. The consumptions of dye wastewater were reduced, and the printing process was simplified. We think that this work may provide a novel insight into printed textiles with enhanced color effects and alleviate the environmental impact of conventional textile coloration.
- 16 February 2024
- Published by Springer Nature in Cellulose
- Vol. 31 (4) , 2129-2140
A method of constructing highly durable conductive materials by growing metal particles inside and outside fibers through solvation and multivalent bonding forces
- 16 February 2024
- Published by Springer Nature in Cellulose
- Vol. 31 (4) , 2129-2140
A method of constructing highly durable conductive materials by growing metal particles inside and outside fibers through solvation and multivalent bonding forces
- 24 January 2024
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 35 (3) , 1-15
Preparation of CNT/Cu conductive fabrics by a combined strategy of tea saponin foam finishing and vacuum evaporation plating
- 24 January 2024
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 35 (3) , 1-15
Preparation of CNT/Cu conductive fabrics by a combined strategy of tea saponin foam finishing and vacuum evaporation plating
- Open Access
- 28 August 2023
- Published by Springer Nature in Research Square
A method of constructing highly durable conductive materials by growing metal particles inside and outside fibers through solvation and multivalent bonding forces
Metallized textiles have shown promising applications in the fields of electrical conductivity, Joule heating and electromagnetic shielding. Poor durabilities, especially washability, which caused by the significant mechanical mismatch between rigid metal parts and textiles have hindered commercialization process of these functional textiles. This work constructed ultra-durable conductive cotton fabrics by growing copper nanoparticles with amorphous region-controlled swelling and multivalent bonding forces to complex the metal particles. The enlarged fiber amorphous zone and phen-amine molecules are used as templates to provide further possibilities for the internal and external enrichment growth of copper nanoparticles, providing good conductivity and high durability of the processed cotton fabric. The constructed fabric exhibits excellent electrical conductivity (6.09±0.36×10-3 Ω/sq), electrothermal conversion (60 s, 1 V, ~140 °C) and electromagnetic shielding efficiency (65.32 dB). Notably, the electrical conductivity of the fabric remains essentially unchanged (Rs/R0=1.106) after 100 standard washing tests. This is attributed to the increase in metal particle loading and the enhancement of metal-fiber bonding fastness. Therefore, this work might provide a novel insight for constructing ultra-washable conductive clothing textiles with heating and EMI shielding performance.
- 28 August 2023
- Published by Springer Nature in Research Square
Open AccessA method of constructing highly durable conductive materials by growing metal particles inside and outside fibers through solvation and multivalent bonding forces
Metallized textiles have shown promising applications in the fields of electrical conductivity, Joule heating and electromagnetic shielding. Poor durabilities, especially washability, which caused by the significant mechanical mismatch between rigid metal parts and textiles have hindered commercialization process of these functional textiles. This work constructed ultra-durable conductive cotton fabrics by growing copper nanoparticles with amorphous region-controlled swelling and multivalent bonding forces to complex the metal particles. The enlarged fiber amorphous zone and phen-amine molecules are used as templates to provide further possibilities for the internal and external enrichment growth of copper nanoparticles, providing good conductivity and high durability of the processed cotton fabric. The constructed fabric exhibits excellent electrical conductivity (6.09±0.36×10-3 Ω/sq), electrothermal conversion (60 s, 1 V, ~140 °C) and electromagnetic shielding efficiency (65.32 dB). Notably, the electrical conductivity of the fabric remains essentially unchanged (Rs/R0=1.106) after 100 standard washing tests. This is attributed to the increase in metal particle loading and the enhancement of metal-fiber bonding fastness. Therefore, this work might provide a novel insight for constructing ultra-washable conductive clothing textiles with heating and EMI shielding performance.
- 16 August 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (34) , 41180-41192
Asymmetric Multienergy-Coupled Radiative Warming Textiles for Personal Thermal-Moisture Management
In order to address the requirements for warmth and energy conservation in cold climates, the development of personal thermal management textiles that regulate local human thermal comfort has emerged as a promising solution in recent times. Nevertheless, existing warming textile strategies often rely on a singular energy source, exhibit inadequate air/moisture permeability, and lack adaptability to dynamic and intricate climate variations. Herein, a novel multienergy-coupled radiative warming Janus textile has been effectively designed and fabricated via screen printing and foam finishing. Taking advantage of the synergistic effects of directional water transport capability of polyester-covered cotton (with a directional water-transport index of R = 577.5%), high mid-infrared radiant reflection (at 60%), electrothermal conversion of copper coating (with a sheet resistance of 0.01 Ω sq-1), and strong solar absorption of the nanoporous structure TA@APTES@Fe(III)@CNT (TAFC) coating (at 98.5%), the Janus fabric exhibits exceptional performance in expelling out one-way sweat/moisture (R = 329.3%) and solar heating (86.9 °C)/Joule heating (226.4 °C at 3.0 V)/heat retention (2.4 °C higher than that of cotton fabric). Furthermore, the fabric is also provided with exceptional mechanical, washing, flame-retardant, and antibacterial performance. This research holds the potential to revolutionize the development and production of warming textiles by incorporating desirable sweat/moisture permeability and multienergy-coupled heating.
- 16 August 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (34) , 41180-41192
Asymmetric Multienergy-Coupled Radiative Warming Textiles for Personal Thermal-Moisture Management
In order to address the requirements for warmth and energy conservation in cold climates, the development of personal thermal management textiles that regulate local human thermal comfort has emerged as a promising solution in recent times. Nevertheless, existing warming textile strategies often rely on a singular energy source, exhibit inadequate air/moisture permeability, and lack adaptability to dynamic and intricate climate variations. Herein, a novel multienergy-coupled radiative warming Janus textile has been effectively designed and fabricated via screen printing and foam finishing. Taking advantage of the synergistic effects of directional water transport capability of polyester-covered cotton (with a directional water-transport index of R = 577.5%), high mid-infrared radiant reflection (at 60%), electrothermal conversion of copper coating (with a sheet resistance of 0.01 Ω sq-1), and strong solar absorption of the nanoporous structure TA@APTES@Fe(III)@CNT (TAFC) coating (at 98.5%), the Janus fabric exhibits exceptional performance in expelling out one-way sweat/moisture (R = 329.3%) and solar heating (86.9 °C)/Joule heating (226.4 °C at 3.0 V)/heat retention (2.4 °C higher than that of cotton fabric). Furthermore, the fabric is also provided with exceptional mechanical, washing, flame-retardant, and antibacterial performance. This research holds the potential to revolutionize the development and production of warming textiles by incorporating desirable sweat/moisture permeability and multienergy-coupled heating.