Wangxi Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Wangxi Zhang has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
Weijian Yi
5 shared publicationsWei-Jian Yi
4 shared publicationsJinyi Zhang
3 shared publicationsChao He
2 shared publications- Hyeon-Jong Hwang
School of Architecture, Konkuk University, Seoul, Korea
2 shared publications - Xiang-Dong Cai
1 Key Laboratory of Disaster Prevention and Mitigation in Civil Engineering of Gansu Province, Lanzhou University of Technology, Lanzhou, 730050, P. R. China
2 shared publications
Latest Publications
- Open Access
Identifying Two-Parameter Pasternak Foundation Stiffness from Plate Vibration Frequencies: A Bayesian Framework with Cross-Platform Verification for Soft-Ground Highway Widening
Winkler models transmit no shear and cannot reproduce the differential settlement and lateral squeezing that drive soft-ground widening distress. The Pasternak model restores shear coupling, but its shear layer stiffness has remained unmeasurable without static loading. This study identified the compression coefficient k and shear layer stiffness from lightweight plate vibration tests. A Hamiltonian eigenvalue formulation distinguished the parameters through their different geometric weights in the fundamental mode; a Chebyshev–Ritz solver established internal convergence, with independent verification by a SAP2000 v27 solid model against laboratory frequencies. Bayesian MCMC with a K30-informed prior and a resolution-consistent noise model returned k = 5.99 ± 0.58 MPa/m and = 0.153 ± 0.008 MN/m, with prior sensitivity and leave-one-plate-out checks. Transferred to Abaqus 2026 and SAP2000 v27 without retuning, the model agreed with a published finite element benchmark—a consistency check, not a field validation—within 5% on the shear-driven responses, whereas a matched-stiffness Winkler model deviated by roughly 20%. Recalibrating the Winkler stiffness closed that gap only by shifting the stiffness estimate by approximately two posterior standard deviations from the identified value, and the trough extent remained unreproduced. The Sobol indices indicated that these responses were driven primarily by . A three-plate campaign can be completed within one working day without requiring lane closure; field instrumentation is under way.Open AccessIdentifying Two-Parameter Pasternak Foundation Stiffness from Plate Vibration Frequencies: A Bayesian Framework with Cross-Platform Verification for Soft-Ground Highway Widening
Winkler models transmit no shear and cannot reproduce the differential settlement and lateral squeezing that drive soft-ground widening distress. The Pasternak model restores shear coupling, but its shear layer stiffness has remained unmeasurable without static loading. This study identified the compression coefficient k and shear layer stiffness from lightweight plate vibration tests. A Hamiltonian eigenvalue formulation distinguished the parameters through their different geometric weights in the fundamental mode; a Chebyshev–Ritz solver established internal convergence, with independent verification by a SAP2000 v27 solid model against laboratory frequencies. Bayesian MCMC with a K30-informed prior and a resolution-consistent noise model returned k = 5.99 ± 0.58 MPa/m and = 0.153 ± 0.008 MN/m, with prior sensitivity and leave-one-plate-out checks. Transferred to Abaqus 2026 and SAP2000 v27 without retuning, the model agreed with a published finite element benchmark—a consistency check, not a field validation—within 5% on the shear-driven responses, whereas a matched-stiffness Winkler model deviated by roughly 20%. Recalibrating the Winkler stiffness closed that gap only by shifting the stiffness estimate by approximately two posterior standard deviations from the identified value, and the trough extent remained unreproduced. The Sobol indices indicated that these responses were driven primarily by . A three-plate campaign can be completed within one working day without requiring lane closure; field instrumentation is under way. - Open Access
Rational Width-to-Thickness Ratios for Square Concrete-Filled Steel Tubular Columns: A Comparative Study on Cold-Formed and Tailor-Welded Tubes
The width-to-thickness ratio (B/t) is a pivotal design parameter for square concrete-filled steel tubular (CFST) columns, governing the suppression of local buckling and directly influencing the load-bearing capacity and ductility of members. To establish differentiated B/t limits for cold-formed (CFCFST) and tailor-welded (CFTWST) square CFST columns, this study critically reviews and compares five representative design formulas from international codes and the literature. Their applicability, theoretical rationality, and inherent limitations are systematically assessed. Particular attention is paid to the distinct mechanical characteristics induced by cold forming (strain hardening) and welding (residual stresses), based on which the suitability of each formula for CFCFST and CFTWST columns is separately evaluated. Through parametric analyses using a rigorously validated finite element (FE) model—verified against 14 in-house experiments and 210 literature specimens—and grounded in the steel–concrete compatibility mechanism, targeted B/t limits are proposed for each tube type.
Open AccessRational Width-to-Thickness Ratios for Square Concrete-Filled Steel Tubular Columns: A Comparative Study on Cold-Formed and Tailor-Welded Tubes
The width-to-thickness ratio (B/t) is a pivotal design parameter for square concrete-filled steel tubular (CFST) columns, governing the suppression of local buckling and directly influencing the load-bearing capacity and ductility of members. To establish differentiated B/t limits for cold-formed (CFCFST) and tailor-welded (CFTWST) square CFST columns, this study critically reviews and compares five representative design formulas from international codes and the literature. Their applicability, theoretical rationality, and inherent limitations are systematically assessed. Particular attention is paid to the distinct mechanical characteristics induced by cold forming (strain hardening) and welding (residual stresses), based on which the suitability of each formula for CFCFST and CFTWST columns is separately evaluated. Through parametric analyses using a rigorously validated finite element (FE) model—verified against 14 in-house experiments and 210 literature specimens—and grounded in the steel–concrete compatibility mechanism, targeted B/t limits are proposed for each tube type.
- 29 October 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 115
Bidirectional cyclic loading test and numerical investigation of precast concrete corner joints with slabs
- 29 October 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 115
Bidirectional cyclic loading test and numerical investigation of precast concrete corner joints with slabs
- Open Access
Bearing Behaviors of Grouted Sleeve Connections After High Temperature Followed by Water Cooling Under Cyclic Loading
As a common rebar connector in prefabricated projects, the grouted sleeve connection (GSC) affects structural performance during fire and seismic events. However, the combined impact of both factors may alter GSC performance, although most studies concentrate on high temperature or loading schemes. Few quantitative models are available for predicting the mechanical characteristics of post-fire GSCs under unidirectional tension, let alone cyclic loading. In this study, 18 GSC specimens were made and subjected to heating, water cooling, and cyclic loading. Thermal and mechanical loads caused rebar fracture below 400 °C, but pullout failure occurred beyond 400 °C. GSC performance declined as temperature and loading cycles increased. Based on this test and several previous investigations, predictive models with guaranteed rates for GSC performance after high temperature by water cooling under uniaxial and cyclic loading were constructed. According to the predictive models, the four parameters (including yield strength, ultimate strength, elastic modulus, and ultimate strain) of the GSCs using HRB400 rebars can be obtained.
Open AccessBearing Behaviors of Grouted Sleeve Connections After High Temperature Followed by Water Cooling Under Cyclic Loading
As a common rebar connector in prefabricated projects, the grouted sleeve connection (GSC) affects structural performance during fire and seismic events. However, the combined impact of both factors may alter GSC performance, although most studies concentrate on high temperature or loading schemes. Few quantitative models are available for predicting the mechanical characteristics of post-fire GSCs under unidirectional tension, let alone cyclic loading. In this study, 18 GSC specimens were made and subjected to heating, water cooling, and cyclic loading. Thermal and mechanical loads caused rebar fracture below 400 °C, but pullout failure occurred beyond 400 °C. GSC performance declined as temperature and loading cycles increased. Based on this test and several previous investigations, predictive models with guaranteed rates for GSC performance after high temperature by water cooling under uniaxial and cyclic loading were constructed. According to the predictive models, the four parameters (including yield strength, ultimate strength, elastic modulus, and ultimate strain) of the GSCs using HRB400 rebars can be obtained.
- 17 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Fuzzy iterative learning fault tolerant control for batch processes with different types of actuator faults
A new switching control strategy is proposed for nonlinear batch processes with different types of actuator faults. First, the nonlinear batch process is transformed into different equivalent hybrid discrete two-dimensional T-S fuzzy models according to different types of faults, and an iterative learning control law is designed. Then, based on the Lyapunov stability theory, sufficient conditions under different types of fault conditions are given to ensure the system stable, and the corresponding switching signals are designed at the same time. Finally, taking a three-capacity water tank as an example, the experiment verifies the effectiveness of the algorithm.
- 17 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Fuzzy iterative learning fault tolerant control for batch processes with different types of actuator faults
A new switching control strategy is proposed for nonlinear batch processes with different types of actuator faults. First, the nonlinear batch process is transformed into different equivalent hybrid discrete two-dimensional T-S fuzzy models according to different types of faults, and an iterative learning control law is designed. Then, based on the Lyapunov stability theory, sufficient conditions under different types of fault conditions are given to ensure the system stable, and the corresponding switching signals are designed at the same time. Finally, taking a three-capacity water tank as an example, the experiment verifies the effectiveness of the algorithm.
- 1 May 2020
- Published by ASTM International in Geotechnical Testing Journal
- Vol. 44 (3) , 622-636
Evaluation of Soil Coefficients for Two-Parameter Subgrade Soil Model Based on Rigid Plate Loading Tests
Two-parameter elastic foundation models have great potential for approximate soil-foundation-structure interaction analysis. A hurdle to the wide application of this model has been the difficulty of calibrating the two soil coefficients: the compression coefficient k and shear coefficient G. This paper presents a novel parameter calibration method for k and G based on a number of rigid plate loading tests. Empirical k and G values are also recommended. Experiments showed the validity of the proposed method. Two case studies verified the significance of the two-parameter model in the prediction of footing settlement when interactions among neighboring footings exist.
- 1 May 2020
- Published by ASTM International in Geotechnical Testing Journal
- Vol. 44 (3) , 622-636
Evaluation of Soil Coefficients for Two-Parameter Subgrade Soil Model Based on Rigid Plate Loading Tests
Two-parameter elastic foundation models have great potential for approximate soil-foundation-structure interaction analysis. A hurdle to the wide application of this model has been the difficulty of calibrating the two soil coefficients: the compression coefficient k and shear coefficient G. This paper presents a novel parameter calibration method for k and G based on a number of rigid plate loading tests. Empirical k and G values are also recommended. Experiments showed the validity of the proposed method. Two case studies verified the significance of the two-parameter model in the prediction of footing settlement when interactions among neighboring footings exist.