Pietro Parodi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Pietro Parodi has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Thierry Magin
Aeronautics and Aerospace Department, von Karman Institute for Fluid Dynamics, Rhode-Saint-Genese, Belgium
4 shared publications - Federico Petronio
Laboratoire de Physique des Plasmas (LPP), CNRS, Sorbonne Université, École Polytechnique, Institut Polytechnique de Paris , 91120 Palaiseau
2 shared publications Giovanni Lapenta
14Department of Mathematics, KU Leuven, Celestijnenlaan 200B, 3001 Leuven, Belgium
2 shared publications- Aaron Knoll
Plasma Propulsion Laboratory, Department of Aeronautics, Imperial College London, London, United Kingdom
1 shared publication - Alberto Marín-Cebrián
Department of Aerospace Engineering, Universidad Carlos III de Madrid, Leganés, Spain
1 shared publication - Alejandro Alvarez Laguna
Laboratoire de Physique des Plasmas (LPP), CNRS, Sorbonne Université, École Polytechnique, Institut Polytechnique de Paris 1 , 91120 Palaiseau
1 shared publication
Latest Publications
- Open Access
- 16 January 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (2)
Benchmark for two-dimensional large scale coherent structures in partially magnetized E×B plasmas - Community collaboration & lessons learned
Low-temperature plasmas are essential to both fundamental scientific research and critical industrial applications. As in many areas of science, numerical simulations have become a vital tool for uncovering new physical phenomena and guiding technological development. Code benchmarking remains crucial for verifying implementations and evaluating performance. This work continues the Landmark benchmark initiative, a series specifically designed to support the verification of low-temperature plasma codes. In this study, seventeen simulation codes from a collaborative community of nineteen international institutions modeled a partially magnetized E×B Penning discharge. The emergence of large scale coherent structures, or rotating plasma spokes, endows this configuration with an enormous range of time scales, making it particularly challenging to simulate. The codes showed excellent agreement on the rotation frequency of the spoke as well as key plasma properties, including time-averaged ion density, plasma potential, and electron temperature profiles. Achieving this level of agreement came with challenges, and we share lessons learned on how to conduct future benchmarking campaigns. Comparing code implementations, computational hardware, and simulation runtimes also revealed interesting trends, which are summarized with the aim of guiding future plasma simulation software development.
- 16 January 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (2)
Open AccessBenchmark for two-dimensional large scale coherent structures in partially magnetized E×B plasmas - Community collaboration & lessons learned
Low-temperature plasmas are essential to both fundamental scientific research and critical industrial applications. As in many areas of science, numerical simulations have become a vital tool for uncovering new physical phenomena and guiding technological development. Code benchmarking remains crucial for verifying implementations and evaluating performance. This work continues the Landmark benchmark initiative, a series specifically designed to support the verification of low-temperature plasma codes. In this study, seventeen simulation codes from a collaborative community of nineteen international institutions modeled a partially magnetized E×B Penning discharge. The emergence of large scale coherent structures, or rotating plasma spokes, endows this configuration with an enormous range of time scales, making it particularly challenging to simulate. The codes showed excellent agreement on the rotation frequency of the spoke as well as key plasma properties, including time-averaged ion density, plasma potential, and electron temperature profiles. Achieving this level of agreement came with challenges, and we share lessons learned on how to conduct future benchmarking campaigns. Comparing code implementations, computational hardware, and simulation runtimes also revealed interesting trends, which are summarized with the aim of guiding future plasma simulation software development.
- 1 October 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (10) , 105009
Performance characterization of intake-collectors for atmosphere-breathing electric propulsion systems
Atmosphere-breathing electric propulsion offers a promising solution for orbit maintenance in very low Earth orbit (VLEO) by collecting and ionizing residual atmospheric particles to generate thrust. The intake-collector (IC) plays a critical role in determining the propulsion system efficiency, yet experimental data on IC performance under relevant flow conditions remain scarce. This work establishes an experimental approach based on an adaptation of the dynamic method used in vacuum technology to enable direct evaluation of IC performance. We investigated plasma beam transmission through an IC model by generating an argon plasma beam with orbital-velocity ions via an RF plasma source. Different plasma conditions were established, and electrostatic probes were used to characterize the ion current density and energy distributions of the plasma beam. The transmission probabilities measured for the different plasma conditions show that transmission probability remains approximately constant despite variations in total ion current and background pressure. The measured probabilities aligned well with particle simulations accounting for space charge effects, validating our method. However, when the VLEO environment is simulated, the calculated transmission probability differs significantly from the one measured here, highlighting fundamental differences between the plasma beams in our experiments and the hyperthermal neutral flow in VLEO. Biasing the IC to mitigate space charge effects revealed a non-monotonic relationship between transmission probability and intake potential, suggesting that simple wall biasing is insufficient to replicate orbital flow conditions. While numerical extrapolation is necessary to link experimental and VLEO conditions, controlled experiments like this are essential to validate gas-surface interaction models used for high-velocity internal flows. Despite these challenges, the dynamic method adaptation developed in this study is broadly applicable to both plasma and neutral beams, providing a versatile framework for future experimental investigations in atmospheric-breathing electric propulsion systems.
- 1 October 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (10) , 105009
Performance characterization of intake-collectors for atmosphere-breathing electric propulsion systems
Atmosphere-breathing electric propulsion offers a promising solution for orbit maintenance in very low Earth orbit (VLEO) by collecting and ionizing residual atmospheric particles to generate thrust. The intake-collector (IC) plays a critical role in determining the propulsion system efficiency, yet experimental data on IC performance under relevant flow conditions remain scarce. This work establishes an experimental approach based on an adaptation of the dynamic method used in vacuum technology to enable direct evaluation of IC performance. We investigated plasma beam transmission through an IC model by generating an argon plasma beam with orbital-velocity ions via an RF plasma source. Different plasma conditions were established, and electrostatic probes were used to characterize the ion current density and energy distributions of the plasma beam. The transmission probabilities measured for the different plasma conditions show that transmission probability remains approximately constant despite variations in total ion current and background pressure. The measured probabilities aligned well with particle simulations accounting for space charge effects, validating our method. However, when the VLEO environment is simulated, the calculated transmission probability differs significantly from the one measured here, highlighting fundamental differences between the plasma beams in our experiments and the hyperthermal neutral flow in VLEO. Biasing the IC to mitigate space charge effects revealed a non-monotonic relationship between transmission probability and intake potential, suggesting that simple wall biasing is insufficient to replicate orbital flow conditions. While numerical extrapolation is necessary to link experimental and VLEO conditions, controlled experiments like this are essential to validate gas-surface interaction models used for high-velocity internal flows. Despite these challenges, the dynamic method adaptation developed in this study is broadly applicable to both plasma and neutral beams, providing a versatile framework for future experimental investigations in atmospheric-breathing electric propulsion systems.
- Open Access
Particle-based Simulation of an Air-Breathing Electric Propulsion System
A novel concept called Air-Breathing Electric Propulsion proposes to fly satellites at altitudes in the range 180-250 km, since this would have some advantages for the performance of radio communication and Earth observation equipment. The ABEP satellites compensate the atmospheric drag through a continuous thrust provided by collecting, ionizing and accelerating the residual atmospheric particles. It is clear that the feasibility of this concept will require a significant design and testing effort, performed first on ground and later in orbit. Plasma simulation tools play a fundamental role in the development of this technology, for two main reasons: (i) they can potentially increase dramatically the optimization and testing process of ABEP systems, since on-ground testing and in-orbit demonstrators are costly and time consuming, and (ii) the fidelity of on-ground testing is limited by the finite size and pumping speed of high-vacuum facilities, as well as the means through which the orbital flow is produced. In this paper, we demonstrate a one-way coupled, particle-based simulation strategy for a CubeSat sized ABEP system. The neutral flow in the full geometry of the ABEP system comprising the intake and the thruster is simulated first through Direct Simulation Monte Carlo. Then, the resulting neutral density is used as the input for a Particle-in-Cell simulation of the detailed thruster geometry. The simulations are performed in 3D and within the VKI in-house code Pantera, taking advantage of the fully-implicit energy-conserving scheme.
Open AccessParticle-based Simulation of an Air-Breathing Electric Propulsion System
A novel concept called Air-Breathing Electric Propulsion proposes to fly satellites at altitudes in the range 180-250 km, since this would have some advantages for the performance of radio communication and Earth observation equipment. The ABEP satellites compensate the atmospheric drag through a continuous thrust provided by collecting, ionizing and accelerating the residual atmospheric particles. It is clear that the feasibility of this concept will require a significant design and testing effort, performed first on ground and later in orbit. Plasma simulation tools play a fundamental role in the development of this technology, for two main reasons: (i) they can potentially increase dramatically the optimization and testing process of ABEP systems, since on-ground testing and in-orbit demonstrators are costly and time consuming, and (ii) the fidelity of on-ground testing is limited by the finite size and pumping speed of high-vacuum facilities, as well as the means through which the orbital flow is produced. In this paper, we demonstrate a one-way coupled, particle-based simulation strategy for a CubeSat sized ABEP system. The neutral flow in the full geometry of the ABEP system comprising the intake and the thruster is simulated first through Direct Simulation Monte Carlo. Then, the resulting neutral density is used as the input for a Particle-in-Cell simulation of the detailed thruster geometry. The simulations are performed in 3D and within the VKI in-house code Pantera, taking advantage of the fully-implicit energy-conserving scheme.
- Open Access
- 1 January 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (1)
Step-by-step verification of particle-in-cell Monte Carlo collision codes
The particle-in-cell (PIC) method with Monte Carlo collisions (MCC) is widely used in the simulation of non-equilibrium plasmas for electric propulsion and laboratory applications. Due to the simplicity of the basic PIC algorithm and the specific modeling needs of the different research groups, many codes have been independently developed. Verification of these codes, i.e., ensuring that the computational code correctly implements the intended mathematical models and algorithms, is of fundamental importance. Different benchmark cases, such as one from Turner et al. [Phys. Plasmas 20, 013507 (2013)], Charoy et al. [Plasma Sources Sci. Technol. 28, 105010 (2019)], and Villafana et al. [Plasma Sources Sci. Technol. 30, 075002 (2021)], have been published in recent years. These have consisted of a complex physical setup, in which many computation modules interact to yield the final result. Although this approach has the advantage of testing the code in a realistic case, it may hide some implementation errors. Moreover, in the case of disagreement, the previous works do not provide an easy way to identify the faulty code modules. In this work, we propose a step-by-step approach for the verification of PIC-MCC codes in a 2D-3V electrostatic setup. The criteria for the test cases are (i) they should highlight possible implementation errors by testing the modules separately, whenever possible (ii) they should be free from physical instabilities to avoid chaotic behavior, and (iii) the numerical result should be accompanied by analytical calculations, for confirmation purposes. The seven test cases identified all show excellent agreement between the authors' codes.
- 1 January 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (1)
Open AccessStep-by-step verification of particle-in-cell Monte Carlo collision codes
The particle-in-cell (PIC) method with Monte Carlo collisions (MCC) is widely used in the simulation of non-equilibrium plasmas for electric propulsion and laboratory applications. Due to the simplicity of the basic PIC algorithm and the specific modeling needs of the different research groups, many codes have been independently developed. Verification of these codes, i.e., ensuring that the computational code correctly implements the intended mathematical models and algorithms, is of fundamental importance. Different benchmark cases, such as one from Turner et al. [Phys. Plasmas 20, 013507 (2013)], Charoy et al. [Plasma Sources Sci. Technol. 28, 105010 (2019)], and Villafana et al. [Plasma Sources Sci. Technol. 30, 075002 (2021)], have been published in recent years. These have consisted of a complex physical setup, in which many computation modules interact to yield the final result. Although this approach has the advantage of testing the code in a realistic case, it may hide some implementation errors. Moreover, in the case of disagreement, the previous works do not provide an easy way to identify the faulty code modules. In this work, we propose a step-by-step approach for the verification of PIC-MCC codes in a 2D-3V electrostatic setup. The criteria for the test cases are (i) they should highlight possible implementation errors by testing the modules separately, whenever possible (ii) they should be free from physical instabilities to avoid chaotic behavior, and (iii) the numerical result should be accompanied by analytical calculations, for confirmation purposes. The seven test cases identified all show excellent agreement between the authors' codes.
- Open Access
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2996 (1)
SMARTA: A code based on the view-factor method for collisionless flows
We present our open-source code SMARTA. It can be used to compute internal and external collisionless gas flows when surface reflections are fully diffuse and g
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2996 (1)
Open AccessSMARTA: A code based on the view-factor method for collisionless flows
We present our open-source code SMARTA. It can be used to compute internal and external collisionless gas flows when surface reflections are fully diffuse and g
- 1 August 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (8)
Modeling high-Mach-number rarefied crossflows past a flat plate using the maximum-entropy moment method
The 10 and 14-moment maximum-entropy methods are applied to the study of high-Mach-number non-reacting crossflows past a flat plate at large degrees of rarefaction. The moment solutions are compared to particle-based kinetic solutions, showing a varying degree of accuracy. At a Knudsen number of 0.1, the 10-moment method is able to reproduce the shock layer, while it fails to predict the low-density wake region, due to the lack of a heat flux. Conversely, the 14-moment method results in accurate predictions of both regions. At a Knudsen number of 1, the 10-moment method produces unphysical results in both the shock layer and in the wake. The 14-moment method also shows a reduced accuracy, but manages to predict a reasonable shock region, free of unphysical sub-shocks and is in qualitative agreement with the kinetic solution. Accuracy is partially lost in the wake, where the 14-moment method predicts a thin unphysical high-density layer, concentrated on the centerline. An analysis of the velocity distribution functions (VDF) indicates strongly non-Maxwellian shapes and the presence of distinct particle populations, in the wake, crossing each other at the centerline. The particle-based and the 14-moment method VDFs are in qualitative agreement.
- 1 August 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (8)
Modeling high-Mach-number rarefied crossflows past a flat plate using the maximum-entropy moment method
The 10 and 14-moment maximum-entropy methods are applied to the study of high-Mach-number non-reacting crossflows past a flat plate at large degrees of rarefaction. The moment solutions are compared to particle-based kinetic solutions, showing a varying degree of accuracy. At a Knudsen number of 0.1, the 10-moment method is able to reproduce the shock layer, while it fails to predict the low-density wake region, due to the lack of a heat flux. Conversely, the 14-moment method results in accurate predictions of both regions. At a Knudsen number of 1, the 10-moment method produces unphysical results in both the shock layer and in the wake. The 14-moment method also shows a reduced accuracy, but manages to predict a reasonable shock region, free of unphysical sub-shocks and is in qualitative agreement with the kinetic solution. Accuracy is partially lost in the wake, where the 14-moment method predicts a thin unphysical high-density layer, concentrated on the centerline. An analysis of the velocity distribution functions (VDF) indicates strongly non-Maxwellian shapes and the presence of distinct particle populations, in the wake, crossing each other at the centerline. The particle-based and the 14-moment method VDFs are in qualitative agreement.