LCLinlin Cao

Linlin Cao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Linlin Cao has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Effects of Reynolds number on flow structures and broadband forces of a pump-jet propulsor under non-uniform inflow

    by Pei Xu, Jianwei Zhang, Wei Zhao, Haiting Yu, Linlin Cao, Dazhuan Wu

    Under non-uniform wake conditions, the effects of Reynolds-number variation on the broadband-force response of a pump-jet propulsor remain unclear. In this study, an experimentally validated large-eddy simulation method is used to systematically examine Reynolds-number effects on the upstream wake structure, internal flow-field evolution, and spectral characteristics of rotor broadband forces. These results show that increasing Reynolds number leads to a marked contraction of the aft-body boundary layer and the low-speed wake upstream of the propulsor. At the higher Reynolds number, flow separation and wake diffusion in the stator region are suppressed, while rotor–stator shear interaction and local turbulence intensity near the rotor inlet are enhanced. Meanwhile, velocity fluctuations upstream of the rotor are attenuated, reducing the amplitudes of blade lift fluctuations. Flow separation over the rotor blade surface is weakened, and the regions of elevated skin-friction coefficient and pressure fluctuations from the aft half-chord to the trailing edge shrink substantially. These changes significantly reduce broadband fluctuations in the rotor thrust coefficient. The findings provide a physical basis for model-scale testing, numerical prediction, and design optimization of pump-jet propulsors.


  • Research on the feature extraction method of secondary flow in pump-jet propulsor

    by Xinli Jin, Jianwei Zhang, Pei Xu, Ning Liang, Ning Li, Linlin Cao, Dazhuan Wu

    Secondary flow plays a pivotal role in flow separation within turbomachinery, impacting the performance of pump-jet propulsors through associated secondary flow losses. Past research has predominantly concentrated on water wing models, leading to limited insights into more intricate turbomachines. This study explores methods for extracting secondary flow characteristics in pump-jet propulsors through numerical simulations employing large eddy simulation, coupled with vortex identification techniques and analysis of velocity and pressure fields. Notable features of secondary flow include the tip leakage vortex and root shedding vortex, the latter exhibiting reverse flow and pronounced oscillations at the suction side's trailing edge. The distribution of driving forces and secondary flow intensity is evaluated using S3 flow surface theory, revealing a substantial influence of Coriolis forces at the blade root. This study proposes an innovative approach utilizing helical line techniques to form S3 approximate flow surfaces, facilitating thorough extraction of secondary flow characteristics at both blade tips and roots. This research fills existing gaps in the study of secondary flow phenomena in pump-jet propulsors, contributing valuable methodologies and a theoretical framework for evaluating secondary flow energy dynamics and related noise generation, thereby advancing the understanding of these critical elements in fluid mechanics and propulsion systems.


  • Unsteady loading and tip-vortex instability of a propeller under coupled oblique inflow and cavitation

    by Ning Liang, Jianwei Zhang, Dengcheng Liu, Hao Wu, Linlin Cao, Dazhuan Wu

    Propellers in oblique inflow exhibit pronounced thrust/torque fluctuations and premature tip-vortex instability, while cavitation further intensifies the unsteadiness. Focusing on a four-bladed right-handed PC456 propeller, high-fidelity simulations are performed using stress-blended eddy simulation coupled with the Zwart–Gerber–Belamri cavitation model across multiple operating conditions. A multi-scale time-frequency framework—connecting a full-propeller and single-blade responses with radial-strip decomposition and moving trailing-edge probes—is established to elucidate how oblique inflow and cavitation jointly govern loading and the evolution of coherent tip-vortex structures. Results indicate that oblique inflow breaks loading symmetry and strengthens phase modulation of single-blade responses at the shaft frequency, whereas the aggregate spectrum of the full propeller is dominated by the blade-passing frequency. Cavitation clamps local suction-side pressure near vapor pressure, shifts loading from the tip toward mid-span, and introduces high-frequency pressure pulses; in combination with oblique inflow, this yields a composite spectral signature in which low-frequency phase modulation is superimposed with cavitation-induced high-frequency pulses. Under joint action, tip-vortex coherence is lost earlier, and breakdown occurs sooner; in the far wake, the dominant frequency of the turbulent-kinetic-energy spectrum shifts toward approximately one-half to one-quarter of the blade-passing frequency, evidencing a pronounced low-frequency drift.


  • Open Access

    Studying the Impact of the Load Distribution Ratio on the Unsteady Performance of a Dual-Stage Pump-Jet Propulsor

    by Jiansheng Zhang, Ning Liang, Jianwei Zhang, Linlin Cao, Dazhuan Wu, Wei Zhao, Hanqiao Han

    This study investigated the impact of different load distribution ratios between two rotors on the unsteady performance of dual-stage pump-jet propulsors using Computational Fluid Dynamics (CFDs) and experimental methods. The Shear Stress Transport (SST) k-ω model was employed to solve turbulence problems, and the numerical simulation method used was validated. The following conclusions were drawn: Different load distribution ratios of the dual-stage rotors have no significant impact on the overall propulsion performance of the propulsor. As the load distribution ratio is aft-shifted, the axial unsteady force of the entire propulsor continuously decreases, with a reduction of up to 53.6%. This is due to the gradual reduction in the energy of the first-stage rotor, leading to a more uniform Blade-Passing Frequency Velocity Harmonic Coefficient (BPFVHC) in front of the second-stage rotor, thereby gradually reducing the unsteady force of the second-stage rotor. The experimental results also indicate that the aft-shifted load model can reduce the sound pressure level of the propulsor. Compared to the prototype propulsor, the sound pressure level at the Blade-Passing Frequency decreases by 6.67 dB, or about 78.5%, in sound energy. This study has important implications for the low-excitation design of dual-stage pump-jet propulsors.


  • Numerical calculation method of a co-rotating two-stage pump-jet propulsor

    by Jianwei Zhang, Ning Liang, Yongle Ding, Jian Li, Linlin Cao, Dazhuan Wu

    Vibration, noise, and cavitation remain challenges for underwater propulsors. Besides blade design, a multi-stage structure is one of the ways to solve these problems. Based on the concept above, this paper proposes a co-rotating two-stage pump-jet propulsor. Due to the complex structure, the ability to capture inflow characteristics in numerical simulations would significantly affect its hydrodynamic performance results. Therefore, this paper investigates the influence of a numerical calculation method on prediction results of the two-stage pump-jet from the perspectives of mesh density, time step size, and turbulence model. The results show that differences in the rotors' inflow lead to varying convergence of their calculation results with changes in mesh density and time step size. It is also observed that the unsteady performance of both rotors is closely related to the periodic components in their inflow. A large time step size hinders capturing the forward rotor wake component in the rear rotor's inflow. The shear-stress transport k–ω model and improved delayed detached eddy simulation (IDDES) model are compared. The IDDES model can capture more detailed vortex structure in the flow field, resulting in broadband characteristics in its results and observable low-frequency differences between the two rotors. The research is helpful to the selection of the calculation method for multi-stage pump, tandem propeller, and other multi-stage rotary machinery.


  • Energy Contribution Study of Blade Cavitation Control by Obstacles in a Waterjet Pump Based on mPOD and EEMD

    by Guoshou Zhao, Ning Liang, Qianqian Li, Wei Dong, Linlin Cao, Dazhuan Wu

    It has been confirmed that the passive obstacles would substantially depress the leading-edge cavitation in a waterjet pump. Combined with the experiments and numerical simulations, this work revisits blade cavitation evolutions to demonstrate the stabilizing effects of obstacles on cavitation unsteadiness. The multiscale proper orthogonal decomposition (mPOD) and ensemble empirical mode decomposition (EEMD) are adopted to study the energy contributions regarding the cavitation-induced loading and thrust. The mPOD modes illuminate that the leading-edge loading oscillations of the obstacle blade are consequently eliminated where the cavitation is completely depressed and the obstacle cavitation wakes greatly contribute to loading excitation. The thrust statistics demonstrate that the thrust extremes and standard deviation in some revolutions can be well reduced as the large-scale leading-edge cavity depression. The adaptive spectra obtained by EEMD further illuminate that both the tonal and broadband components of blade thrust would be reasonably degraded to some degree. The pump with only one obstacle implementation, as an improvement strategy, is comparatively studied and indicates that single obstacle configuration presents positive effects on the leading-edge cavity depression owing to the pressure-raising effects and can reduce the un-necessary energy loss compared with two obstacles.


  • Open Access

    PIV Study on Grid-Generated Turbulence in a Free Surface Flow

    by Haoyu Yao, Linlin Cao, Dazhuan Wu, Yangyang Gao, Shijie Qin, Faxin Yu

    To investigate the feature of turbulence developing behind the filter device in a current flow, the flow fields at intermediate downstream distance of an immersed grid in an open water channel are recorded using a two-dimensional (2D) Particle Image Velocimetry (PIV) system. The measurements on a series of vertical and horizontal sections are conducted to reveal the stream-wise evolution and depth diversity of grid turbulence in the free surface flow. Unlike the previous experiments by Laser Doppler Velocimetry (LDV) and Hot-Wire Anemometry (HWA), the integral scales and space-time correlations are estimated without using the Taylor hypothesis in this paper. The distributions of mean velocity, turbulence intensity and integral scale show the transition behavior of grid-generated flow from perturbations to fully merged homogenous turbulence. The distributions of velocity and turbulence intensity become more uniform with increasing distance. While the spatial divergence of integral scale becomes more pronounced as the flow structures develop downstream. The vertical distributions of flow parameters reveal the diversity of flow characteristics in the water depth direction influenced by free surface and the outer part of turbulence boundary layer (TBL) from the channel bottom. The applicability of the newly proposed two-order elliptic approximation model for the space-time correlations of the decaying grid turbulence in channel flow is verified at different positions. The calculated convection velocity for large-scale motion and sweep velocity for small-scale motion based on this model bring a new insight into the dynamic pattern of this type of flow.


  • Open Access

    An Adaptive Autogram Approach Based on a CFAR Detector for Incipient Cavitation Detection

    by Ning Chu, Linlin Wang, Liang Yu, Changbo He, Linlin Cao, Bin Huang, Dazhuan Wu

    Cavitation failure often occurs in centrifugal pumps, resulting in severe harm to their performance and life-span. Nowadays, it has become crucial to detect incipient cavitation ahead of cavitation failure. However, most envelope demodulation methods suffer from strong noise and repetitive impacts. This paper proposes an adaptive Autogram approach based on the Constant False Alarm Rate (CFAR). A cyclic amplitude model (CAM) is presented to reveal the cyclostationarity and autocorrelation-periodicity of pump cavitation-caused signals. The Autogram method is improved for envelope demodulation and cyclic feature extraction by introducing the character to noise ratio (CNR) and CFAR threshold. To achieve a high detection rate, CNR parameters are introduced to represent the cavitation intensity in the combined square-envelope spectrum. To maintain a low false alarm, the CFAR detector is combined with the CNR parameter to obtain adaptive thresholds for different data along with sensor positions. By carrying out various experiments of a centrifugal water pump from Status 1 to 10 at different flow rates, the proposed approach is capable of cavitation feature extraction with respect to the CAM model, and can achieve more than a 90% detection rate of incipient cavitation and maintain a 5% false alarm rate. This paper offers an alternative solution for the predictive maintenance of pump cavitation.