Ety Jumiati
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ety Jumiati has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
Abdul Halim Daulay
Program Studi Fisika Fakultas Sains dan Teknologi UIN Sumatera Utara Medan
2 shared publications- Annisa Salsha Safira Nasution
Universitas Islam Negeri Sumatera Utara, Indonesia
1 shared publication - Dika Prananda
Jurusan Fisika Fakultas Sains dan Teknologi Universitas Islam Negeri Sumatera Utara Medan
1 shared publication - Dimas Pratama
Universitas Islam Negeri Sumatera Utara
1 shared publication - Dini Anggraini Srg
Universitas Islam Negeri Sumatera Utara
1 shared publication - Hafizul Mughiroh
Universitas Islam Negeri Sumatera Utara
1 shared publication
Latest Publications
- Open Access
- 27 August 2025
- Published by Universitas Sumatera Utara in Journal of Technomaterial Physics
- Vol. 7 (2) , 133-138
The Influence of Tensile Strength Test Values on the Elongation of Eco-Friendly Paper
Paper is a thin material in the form of sheets. Environmentally friendly paper is obtained from natural materials derived from discarded waste. This study aims to investigate the characteristics and the effect of elongation values on the tensile strength of the produced paper. The composition variations between taro peel and oil palm frond fibers in paper production were 30%:70% (sample A); 40%:60% (sample B); 50%:50% (sample C); 60%:40% (sample D); and 70%:30% (sample E). The pulp preparation process was carried out using the soda method, while the drying process was conducted naturally at room temperature for 12 hours. The results of the paper characterization for samples A, B, C, D, and E showed tensile strength values of 5.2570 kN/m, 6.2875 kN/m, 7.1985 kN/m, 8.8975 kN/m, and 9.5060 kN/m, respectively, while the elongation test values were 1.09%, 1.12%, 1.15%, 1.24%, and 1.52%. These values have met the requirements for printing paper grade A according to SNI 7274:2008. The results indicate that the higher the composition of oil palm frond fibers used, the greater the tensile strength and elongation values of the paper.
- 27 August 2025
- Published by Universitas Sumatera Utara in Journal of Technomaterial Physics
- Vol. 7 (2) , 133-138
Open AccessThe Influence of Tensile Strength Test Values on the Elongation of Eco-Friendly Paper
Paper is a thin material in the form of sheets. Environmentally friendly paper is obtained from natural materials derived from discarded waste. This study aims to investigate the characteristics and the effect of elongation values on the tensile strength of the produced paper. The composition variations between taro peel and oil palm frond fibers in paper production were 30%:70% (sample A); 40%:60% (sample B); 50%:50% (sample C); 60%:40% (sample D); and 70%:30% (sample E). The pulp preparation process was carried out using the soda method, while the drying process was conducted naturally at room temperature for 12 hours. The results of the paper characterization for samples A, B, C, D, and E showed tensile strength values of 5.2570 kN/m, 6.2875 kN/m, 7.1985 kN/m, 8.8975 kN/m, and 9.5060 kN/m, respectively, while the elongation test values were 1.09%, 1.12%, 1.15%, 1.24%, and 1.52%. These values have met the requirements for printing paper grade A according to SNI 7274:2008. The results indicate that the higher the composition of oil palm frond fibers used, the greater the tensile strength and elongation values of the paper.
- Open Access
- 10 March 2025
- Published by Universitas Sumatera Utara in Journal of Technomaterial Physics
- Vol. 7 (1) , 010-015
Effect of Bending Properties on the Impact Strength of Pineapple Leaf Fiber-Polyester Composites
Composite is a material made by combining two or more materials with different mechanical characteristics. This research aims to determine the characteristics and effects of adding pineapple leaf fibers with polyester on the quality of the resulting composite material. The composition variations between pineapple leaf fibers and polyester resin in composite material manufacturing are 30%:70% (sample A), 40%:60% (sample B), 50%:50% (sample C), 60%:40% (sample D), and 70%:30% (sample E). The composite material is molded using a hot press machine with a pressure of 0.1 MPa and a temperature of 150℃ for 15 minutes. The resulting composite material characteristics for samples A, B, C, D, and E, in terms of flexural test values, are 26.684 MPa, 30.489 MPa, 39.016 Mpa, 45.912 Mpa, and 49.356 MPa, respectively, while the impact test values are 0.0278 J/mm², 0.0297 J/mm², 0.0304 J/mm², 0.0306 J/mm², and 0.0322 J/mm², respectively. The higher the composition of pineapple leaf fibers used, the higher the specimens' flexural and impact test values.
- 10 March 2025
- Published by Universitas Sumatera Utara in Journal of Technomaterial Physics
- Vol. 7 (1) , 010-015
Open AccessEffect of Bending Properties on the Impact Strength of Pineapple Leaf Fiber-Polyester Composites
Composite is a material made by combining two or more materials with different mechanical characteristics. This research aims to determine the characteristics and effects of adding pineapple leaf fibers with polyester on the quality of the resulting composite material. The composition variations between pineapple leaf fibers and polyester resin in composite material manufacturing are 30%:70% (sample A), 40%:60% (sample B), 50%:50% (sample C), 60%:40% (sample D), and 70%:30% (sample E). The composite material is molded using a hot press machine with a pressure of 0.1 MPa and a temperature of 150℃ for 15 minutes. The resulting composite material characteristics for samples A, B, C, D, and E, in terms of flexural test values, are 26.684 MPa, 30.489 MPa, 39.016 Mpa, 45.912 Mpa, and 49.356 MPa, respectively, while the impact test values are 0.0278 J/mm², 0.0297 J/mm², 0.0304 J/mm², 0.0306 J/mm², and 0.0322 J/mm², respectively. The higher the composition of pineapple leaf fibers used, the higher the specimens' flexural and impact test values.
- Open Access
- 23 July 2024
- Published by MIQOT Jurnal Ilmu ilmu Keislaman in Fisitek : Jurnal Ilmu Fisika dan Teknologi
- Vol. 8 (1)
MECHANICAL PROPERTY TESTING OF BANNER WASTE MATERIAL AND SIKACIM CONCRETE ADDITIVE BINDER
MECHANICAL PROPERTY TESTING OF BANNER WASTE MATERIAL AND SIKACIM CONCRETE ADDITIVE BINDER
- 23 July 2024
- Published by MIQOT Jurnal Ilmu ilmu Keislaman in Fisitek : Jurnal Ilmu Fisika dan Teknologi
- Vol. 8 (1)
Open AccessMECHANICAL PROPERTY TESTING OF BANNER WASTE MATERIAL AND SIKACIM CONCRETE ADDITIVE BINDER
MECHANICAL PROPERTY TESTING OF BANNER WASTE MATERIAL AND SIKACIM CONCRETE ADDITIVE BINDER
- Open Access
- 19 May 2024
- Published by Universitas Gadjah Mada in Jurnal Teknosains
- Vol. 13 (2) , 152-161
Refinement of cooking oil using activated carbon from coconut shell and zeolite
Bulk cooking oil is obtained from traditional markets and and relatively has a characteristic color that tends to be brownish and unclear; cooking oil has been repeatedly used after frying, resulting in physical changes such as darkening, thickening, and foaming. If bulk cooking oil is repeatedly used for frying, it can be detrimental to health as it may accumulate saturated fatty acids in the oil. This condition prompted the search for solutions to purify bulk cooking oil and use cooking oil using processed zeolite and coconut shell-activated carbon as adsorbents to improve the quality of cooking oil. This research utilizes an experimental-quantitative method. Variations in composition include sample A (bulk cooking oil: 75% and processed natural zeolite: 25%), sample B (bulk cooking oil: 75% and coconut shell activated carbon: 25%), sample C (used cooking oil: 75% and processed natural zeolite: 25%), and sample D (used cooking oil: 75% and coconut shell activated carbon: 25%). The research results on the quality of coconut shell activated carbon obtain moisture content of 13.2%, ash content of 2.1%, volatile matter content of 17.9%, and carbon content of 80.0%, which meets the SNI 06-3730-1995 standard. Meanwhile, the quality results of cooking oil after the purification process obtain moisture content values of 0.09-0.10%, free fatty acid values of 0.14-0.30%, and normal color that does not exceed the maximum standard required by SNI 7709:2019 with a percentage reduction in moisture content of 0-60% and free fatty acids of 0-63.41%.
- 19 May 2024
- Published by Universitas Gadjah Mada in Jurnal Teknosains
- Vol. 13 (2) , 152-161
Open AccessRefinement of cooking oil using activated carbon from coconut shell and zeolite
Bulk cooking oil is obtained from traditional markets and and relatively has a characteristic color that tends to be brownish and unclear; cooking oil has been repeatedly used after frying, resulting in physical changes such as darkening, thickening, and foaming. If bulk cooking oil is repeatedly used for frying, it can be detrimental to health as it may accumulate saturated fatty acids in the oil. This condition prompted the search for solutions to purify bulk cooking oil and use cooking oil using processed zeolite and coconut shell-activated carbon as adsorbents to improve the quality of cooking oil. This research utilizes an experimental-quantitative method. Variations in composition include sample A (bulk cooking oil: 75% and processed natural zeolite: 25%), sample B (bulk cooking oil: 75% and coconut shell activated carbon: 25%), sample C (used cooking oil: 75% and processed natural zeolite: 25%), and sample D (used cooking oil: 75% and coconut shell activated carbon: 25%). The research results on the quality of coconut shell activated carbon obtain moisture content of 13.2%, ash content of 2.1%, volatile matter content of 17.9%, and carbon content of 80.0%, which meets the SNI 06-3730-1995 standard. Meanwhile, the quality results of cooking oil after the purification process obtain moisture content values of 0.09-0.10%, free fatty acid values of 0.14-0.30%, and normal color that does not exceed the maximum standard required by SNI 7709:2019 with a percentage reduction in moisture content of 0-60% and free fatty acids of 0-63.41%.
- Open Access
- 19 April 2024
- Published by UNIB Press in Jurnal Kumparan Fisika
- Vol. 7 (1) , 41-48
PENURUNAN NILAI BILANGAN PEROKSIDA DAN WARNA PADA VARIASI MINYAK GORENG MENGGUNAKAN KARBON AKTIF BATOK KELAPA
ABSTRAK Minyak goreng adalah kebutuhan pangan yang dibutuhkan masyarakat untuk menggoreng makanan. Minyak goreng yang bermutu adalah minyak goreng berwarna bening kekuningan yang terbuat dari tumbuh-tumbuhan dan hewan yang dibuat secara sintetik. . Tujuan penelitian ini adalah meningkatkan mutu minyak goreng dengan menurunkan bilangan peroksida menggunakan karbon aktif batok kelapa. Sampel minyak goreng yang digunakan ada 3 jenis, yaitu minyak goreng curah (sampel A), minyak goreng jelantah dari pedagang ayam penyet (sampel B), dan minyak goreng jelantah dari pedagang gorengan (sampel C). Perbandingan massa minyak goreng dan karbon aktif batok kelapa sebesar 3 : 1 atau 75 gram : 25 gram. Hasil mutu karbon aktif batok kelapa menghasilkan nilai kadar air = 13,2 %, kadar abu = 2,1 %, kadar zat menguap = 17,9 % dan kadar karbon = 80,0 % yang telah memenuhi SNI 06-3730-1995. Hasil mutu minyak goreng setelah proses pemurnian minyak goreng telah memenuhi SNI 7709:2019 karena memperoleh memperoleh bilangan peroksida pada sampel A, B, dan C masing-masing adalah 5,32 meq/kg; 13,84 meq/kg dan 23,50 meq/kg. Pengaruh penurunan bilangan peroksida pada ketiga sampel menunjukkan warna normal dengan nilai di bawah standar maksimum yang dipersyaratkan SNI 7709:2019 dengan standar nilai bilangan peroksida sebesar maksimum 10 meq/kg dan warna dalam keadaan normal. Kata kunci: minyak goreng curah, minyak goreng jelantah dan karbon aktif batok kelapa. ABSTRACT Cooking oil is a food necessity required by the community for frying food. High-quality cooking oil is a clear yellowish oil made from plants and animals that are synthetically produced. The aim of this research is to improve the quality of cooking oil by reducing the peroxide number using coconut shell activated carbon. There are three types of cooking oil samples used, namely bulk cooking oil (sample A), used cooking oil from fried chicken vendors (sample B), and used cooking oil from fried food vendors (sample C). The ratio of cooking oil mass to coconut shell activated carbon is 3:1 or 75 grams: 25 grams. The quality result of coconut shell activated carbon produces values of moisture content = 13.2%, ash content = 2.1%, volatile matter content = 17.9%, and carbon content = 80.0%, which have met the Indonesian National Standard (SNI) 06-3730-1995. The quality result of cooking oil after the cooking oil purification process has met SNI 7709:2019 standards as it obtained peroxide numbers in samples A, B, and C respectively, which are 5.32 meq/kg; 13.84 meq/kg, and 23.50 meq/kg. The influence of reducing the peroxide number in the three samples shows normal color with values below the maximum standard required by SNI 7709:2019 with a maximum peroxide number standard of 10 meq/kg and the color is normal. Keywords: bulk cooking oil, used cooking oil, and coconut shell activated carbon.
- 19 April 2024
- Published by UNIB Press in Jurnal Kumparan Fisika
- Vol. 7 (1) , 41-48
Open AccessPENURUNAN NILAI BILANGAN PEROKSIDA DAN WARNA PADA VARIASI MINYAK GORENG MENGGUNAKAN KARBON AKTIF BATOK KELAPA
ABSTRAK Minyak goreng adalah kebutuhan pangan yang dibutuhkan masyarakat untuk menggoreng makanan. Minyak goreng yang bermutu adalah minyak goreng berwarna bening kekuningan yang terbuat dari tumbuh-tumbuhan dan hewan yang dibuat secara sintetik. . Tujuan penelitian ini adalah meningkatkan mutu minyak goreng dengan menurunkan bilangan peroksida menggunakan karbon aktif batok kelapa. Sampel minyak goreng yang digunakan ada 3 jenis, yaitu minyak goreng curah (sampel A), minyak goreng jelantah dari pedagang ayam penyet (sampel B), dan minyak goreng jelantah dari pedagang gorengan (sampel C). Perbandingan massa minyak goreng dan karbon aktif batok kelapa sebesar 3 : 1 atau 75 gram : 25 gram. Hasil mutu karbon aktif batok kelapa menghasilkan nilai kadar air = 13,2 %, kadar abu = 2,1 %, kadar zat menguap = 17,9 % dan kadar karbon = 80,0 % yang telah memenuhi SNI 06-3730-1995. Hasil mutu minyak goreng setelah proses pemurnian minyak goreng telah memenuhi SNI 7709:2019 karena memperoleh memperoleh bilangan peroksida pada sampel A, B, dan C masing-masing adalah 5,32 meq/kg; 13,84 meq/kg dan 23,50 meq/kg. Pengaruh penurunan bilangan peroksida pada ketiga sampel menunjukkan warna normal dengan nilai di bawah standar maksimum yang dipersyaratkan SNI 7709:2019 dengan standar nilai bilangan peroksida sebesar maksimum 10 meq/kg dan warna dalam keadaan normal. Kata kunci: minyak goreng curah, minyak goreng jelantah dan karbon aktif batok kelapa. ABSTRACT Cooking oil is a food necessity required by the community for frying food. High-quality cooking oil is a clear yellowish oil made from plants and animals that are synthetically produced. The aim of this research is to improve the quality of cooking oil by reducing the peroxide number using coconut shell activated carbon. There are three types of cooking oil samples used, namely bulk cooking oil (sample A), used cooking oil from fried chicken vendors (sample B), and used cooking oil from fried food vendors (sample C). The ratio of cooking oil mass to coconut shell activated carbon is 3:1 or 75 grams: 25 grams. The quality result of coconut shell activated carbon produces values of moisture content = 13.2%, ash content = 2.1%, volatile matter content = 17.9%, and carbon content = 80.0%, which have met the Indonesian National Standard (SNI) 06-3730-1995. The quality result of cooking oil after the cooking oil purification process has met SNI 7709:2019 standards as it obtained peroxide numbers in samples A, B, and C respectively, which are 5.32 meq/kg; 13.84 meq/kg, and 23.50 meq/kg. The influence of reducing the peroxide number in the three samples shows normal color with values below the maximum standard required by SNI 7709:2019 with a maximum peroxide number standard of 10 meq/kg and the color is normal. Keywords: bulk cooking oil, used cooking oil, and coconut shell activated carbon.
- Open Access
- 23 February 2024
- Published by Institute of Research and Community Services Diponegoro University (LPPM UNDIP) in Jurnal Energi Baru dan Terbarukan
- Vol. 5 (1) , 14-19
PENGARUH PENYERAPAN AIR DAN POROSITAS PADA KERAMIK BERPORI BERBAHAN CLAY DAN PUNTUNG ROKOK
Keramik berpori adalah suatu keramik yang mempunyadistribusi ukuran tertentu dan porositas yang relatif tinggi. Penelitian ini bertujuan untuk mengetahui pengaruh bahancampuran puntung rokok pada sifat fisis keramik berpori. Variasi komposisi campuran puntung rokok dan clay antaralain sampel A sebesar (20%;80%), sampel B sebesar(30%;70%), dan sampel C sebesar (40%;60%). Denganpengujian sifat fisis yaitu penyerapan air dan porositas. Sifatfisis yang sudah diuji diperoleh nilai rat-rata adalah15,14%-22,82%. Pada porositas diperoleh nilai rata-rata adalah 9,59%-12,76%. Hasil pengukuran penyerapan air, dan kuat tekan sudah sesuai dengan nilai SNI 8640:2018 tentang standar mutu bata ringan dengan pasang dinding. Variasi pencampuran yang paling optimum diperoleh padasampel C 40%;60% dengan nilai penyerapan air yaitu22,82% dan porositas yaitu 11,88%
- 23 February 2024
- Published by Institute of Research and Community Services Diponegoro University (LPPM UNDIP) in Jurnal Energi Baru dan Terbarukan
- Vol. 5 (1) , 14-19
Open AccessPENGARUH PENYERAPAN AIR DAN POROSITAS PADA KERAMIK BERPORI BERBAHAN CLAY DAN PUNTUNG ROKOK
Keramik berpori adalah suatu keramik yang mempunyadistribusi ukuran tertentu dan porositas yang relatif tinggi. Penelitian ini bertujuan untuk mengetahui pengaruh bahancampuran puntung rokok pada sifat fisis keramik berpori. Variasi komposisi campuran puntung rokok dan clay antaralain sampel A sebesar (20%;80%), sampel B sebesar(30%;70%), dan sampel C sebesar (40%;60%). Denganpengujian sifat fisis yaitu penyerapan air dan porositas. Sifatfisis yang sudah diuji diperoleh nilai rat-rata adalah15,14%-22,82%. Pada porositas diperoleh nilai rata-rata adalah 9,59%-12,76%. Hasil pengukuran penyerapan air, dan kuat tekan sudah sesuai dengan nilai SNI 8640:2018 tentang standar mutu bata ringan dengan pasang dinding. Variasi pencampuran yang paling optimum diperoleh padasampel C 40%;60% dengan nilai penyerapan air yaitu22,82% dan porositas yaitu 11,88%
- Open Access
- 5 December 2023
- Published by LPPM Universitas Ibn Khaldun Bogor in Abdi Dosen : Jurnal Pengabdian Pada Masyarakat
- Vol. 7 (4) , 1195-1203
ACTIVATION OF THE ROLE OF UINSU 125 KKN STUDENTS IN IMPROVING EDUCATION AND HEALTH IN SIBOLANGIT VILLAGE
Sibolangit Village is one of the tourist villages in North Sumatra, this village is located in the Deli Serdang Regency, North Sumatra Province. Limited education in terms of accessing the latest learning information makes it quite difficult for several schools in Sibolangit Village. The health of the elderly is also a special concern there. The method of implementing Real Work Lecture (KKN) activities for North Sumatra State Islamic University students to the community consists of JBT (Additional Learning Hours), JBM (Night Study Hours), JBP (Companion Study Hours), Quran Learning, elderly health, and stunting counseling. All programs carried out have run well which can be seen from the enthusiasm of students in following all the programs that have been made. In following all the programs that have been made the same is the case with the elderly who regularly participate in gymnastics activities and mothers and children who participate in posyandu and counseling.
- 5 December 2023
- Published by LPPM Universitas Ibn Khaldun Bogor in Abdi Dosen : Jurnal Pengabdian Pada Masyarakat
- Vol. 7 (4) , 1195-1203
Open AccessACTIVATION OF THE ROLE OF UINSU 125 KKN STUDENTS IN IMPROVING EDUCATION AND HEALTH IN SIBOLANGIT VILLAGE
Sibolangit Village is one of the tourist villages in North Sumatra, this village is located in the Deli Serdang Regency, North Sumatra Province. Limited education in terms of accessing the latest learning information makes it quite difficult for several schools in Sibolangit Village. The health of the elderly is also a special concern there. The method of implementing Real Work Lecture (KKN) activities for North Sumatra State Islamic University students to the community consists of JBT (Additional Learning Hours), JBM (Night Study Hours), JBP (Companion Study Hours), Quran Learning, elderly health, and stunting counseling. All programs carried out have run well which can be seen from the enthusiasm of students in following all the programs that have been made. In following all the programs that have been made the same is the case with the elderly who regularly participate in gymnastics activities and mothers and children who participate in posyandu and counseling.
- Open Access
- 5 August 2023
- Published by Universitas Udayana in BULETIN FISIKA
- Vol. 24 (2) , 149
Penurunan Kadar Mn Air Sumur Bor Desa Tembung dengan Filtrasi Bahan Karbon Aktif Ampas Teh, Zeolit, Pasir Silika dan Kerikil
Research has been carried out to reduce Mn levels in Tembung village bore wells by filtering with tea waste activated carbon, zeolite, silica sand and gravel, to find out how the quality of bore well water after filtering using activated carbon from tea dregs, silica sand zeolite, and gravel. The composition variations of tea dregs activated carbon, zeolite, silica sand and gravel used are (A) 20 cm activated carbon: 15 cm zeolite: 15 cm silica sand: 10 cm gravel, (B) 15 cm zeolite: 15 cm silica sand: 10 cm gravel: 20 cm activated carbon, (C) 15 cm silica sand: 10 cm gravel: 20 cm activated carbon: 15 cm zeolite, and (D) 10 cm gravel: 20 cm activated carbon: zeolite 15 cm: 15 cm silica sand. The results of testing of bore well water after filtering with activated carbon tea, zeolite, silica sand and gravel with variations in the composition of samples A, B, C and D have met the clean water quality standard based on PERMENKES RI No. 32 of 2017. Based on the four variations in the composition of the filter material, the optimum variation in the raw material mixing composition was obtained with the variation in the composition of sample C with Mn content of 0.011 mg/L. Telah dilakukan penelitian untuk menurunkan kadar Mn pada sumur bor desa Tembung dengan cara pemfilteran dengan bahan karbon aktif ampas teh, zeolit, pasir silika dan kerikil, untuk mengetahui kualitas air sumur bor setelah dilakukan penyaringan menggunakan karbon aktif dari ampas teh, zeolit pasir silika, dan kerikil. Variasi komposisi bahan karbon aktif ampas teh, zeolit, pasir silika dan kerikil yang digunakan adalah (A) karbon aktif 20 cm: zeolit 15 cm: pasir silika 15 cm: kerikil 10 cm, (B) zeolit 15 cm: pasir silika 15 cm : 10 cm kerikil: karbon aktif 20 cm, (C) pasir silika 15 cm: kerikil 10 cm: karbon aktif 20 cm: zeolit 15 cm, dan (D) kerikil 10 cm: karbon aktif 20 cm: zeolit 15 cm: 15 cm pasir silika. Hasil pengujian air sumur bor setelah dilakukan penyaringan dengan karbon aktif ampas teh, zeolit, pasir silika dan kerikil dengan variasi komposisi sampel A, B, C dan D telah memenuhi baku mutu air bersih berdasarkan PERMENKES RI No. 32 Tahun 2017. Berdasarkan keempat variasi komposisi bahan filter tersebut, diperoleh variasi komposisi pencampuran bahan baku yang optimum dengan variasi komposisi bahan sampel C dengan kadar Mn 0,011mg/L.
- 5 August 2023
- Published by Universitas Udayana in BULETIN FISIKA
- Vol. 24 (2) , 149
Open AccessPenurunan Kadar Mn Air Sumur Bor Desa Tembung dengan Filtrasi Bahan Karbon Aktif Ampas Teh, Zeolit, Pasir Silika dan Kerikil
Research has been carried out to reduce Mn levels in Tembung village bore wells by filtering with tea waste activated carbon, zeolite, silica sand and gravel, to find out how the quality of bore well water after filtering using activated carbon from tea dregs, silica sand zeolite, and gravel. The composition variations of tea dregs activated carbon, zeolite, silica sand and gravel used are (A) 20 cm activated carbon: 15 cm zeolite: 15 cm silica sand: 10 cm gravel, (B) 15 cm zeolite: 15 cm silica sand: 10 cm gravel: 20 cm activated carbon, (C) 15 cm silica sand: 10 cm gravel: 20 cm activated carbon: 15 cm zeolite, and (D) 10 cm gravel: 20 cm activated carbon: zeolite 15 cm: 15 cm silica sand. The results of testing of bore well water after filtering with activated carbon tea, zeolite, silica sand and gravel with variations in the composition of samples A, B, C and D have met the clean water quality standard based on PERMENKES RI No. 32 of 2017. Based on the four variations in the composition of the filter material, the optimum variation in the raw material mixing composition was obtained with the variation in the composition of sample C with Mn content of 0.011 mg/L. Telah dilakukan penelitian untuk menurunkan kadar Mn pada sumur bor desa Tembung dengan cara pemfilteran dengan bahan karbon aktif ampas teh, zeolit, pasir silika dan kerikil, untuk mengetahui kualitas air sumur bor setelah dilakukan penyaringan menggunakan karbon aktif dari ampas teh, zeolit pasir silika, dan kerikil. Variasi komposisi bahan karbon aktif ampas teh, zeolit, pasir silika dan kerikil yang digunakan adalah (A) karbon aktif 20 cm: zeolit 15 cm: pasir silika 15 cm: kerikil 10 cm, (B) zeolit 15 cm: pasir silika 15 cm : 10 cm kerikil: karbon aktif 20 cm, (C) pasir silika 15 cm: kerikil 10 cm: karbon aktif 20 cm: zeolit 15 cm, dan (D) kerikil 10 cm: karbon aktif 20 cm: zeolit 15 cm: 15 cm pasir silika. Hasil pengujian air sumur bor setelah dilakukan penyaringan dengan karbon aktif ampas teh, zeolit, pasir silika dan kerikil dengan variasi komposisi sampel A, B, C dan D telah memenuhi baku mutu air bersih berdasarkan PERMENKES RI No. 32 Tahun 2017. Berdasarkan keempat variasi komposisi bahan filter tersebut, diperoleh variasi komposisi pencampuran bahan baku yang optimum dengan variasi komposisi bahan sampel C dengan kadar Mn 0,011mg/L.
- Open Access
- 13 December 2021
- Published by State University of Medan in JURNAL IKATAN ALUMNI FISIKA
- Vol. 7 (4) , 8-12
KARAKTERISTIK SIFAT FISIS BRIKET BIOARANG BERBAHAN DASAR KULIT DURIAN
Abstrak. Telah dilakukan pembuatan briket bioarang sebagai bahan bakar alternatif dengan bahan dasar kulit durian dan perkat tepung tapioka. Variasi komposisi kulit durian dan perekat tepung tapioka antara lain: 70% : 30%, 65% : 55% dan 60% : 40%, dan waktu pengeringan yaitu selama 3 hari. Parameter pengujian yang dilakukan meliputi: densitas, nilai kadar air dan nilai kalor. Data hasil pengujian diperoleh nilai densitas sebesar 0,497-0,639 g/cm3, nilai kadar air sebesar 8,00-8,011% dan nilai kalor sebesar 4.855-5002 cal/g, dimana nilai kadar air dan nilai kalor telah sesuai Standar Mutu Briket Indonesia sehingga briket bioarang yang diperoleh ini dapat dimanfaatkan dan dipakai dalam kehidupan sehari-hari. Kata kunci: briket bioarang, kulit durian dan nilai kalor
- 13 December 2021
- Published by State University of Medan in JURNAL IKATAN ALUMNI FISIKA
- Vol. 7 (4) , 8-12
Open AccessKARAKTERISTIK SIFAT FISIS BRIKET BIOARANG BERBAHAN DASAR KULIT DURIAN
Abstrak. Telah dilakukan pembuatan briket bioarang sebagai bahan bakar alternatif dengan bahan dasar kulit durian dan perkat tepung tapioka. Variasi komposisi kulit durian dan perekat tepung tapioka antara lain: 70% : 30%, 65% : 55% dan 60% : 40%, dan waktu pengeringan yaitu selama 3 hari. Parameter pengujian yang dilakukan meliputi: densitas, nilai kadar air dan nilai kalor. Data hasil pengujian diperoleh nilai densitas sebesar 0,497-0,639 g/cm3, nilai kadar air sebesar 8,00-8,011% dan nilai kalor sebesar 4.855-5002 cal/g, dimana nilai kadar air dan nilai kalor telah sesuai Standar Mutu Briket Indonesia sehingga briket bioarang yang diperoleh ini dapat dimanfaatkan dan dipakai dalam kehidupan sehari-hari. Kata kunci: briket bioarang, kulit durian dan nilai kalor
- Open Access
- 26 July 2021
- Published by State University of Medan in JURNAL IKATAN ALUMNI FISIKA
- Vol. 7 (3) , 7-10
KARAKTERISTIK SIFAT FISIS BATAKO BERBAHAN LIMBAH KERTAS
Abstrak. Telah dilakukan pembuatan batako konvensional dari bahan limbah kertas. Penelitian ini bertujuan untuk teknik pembuatan dan karakteristik batoko limbah kertas konvensional yang dihasilkan. Variasi komposisi semen : pasir : limbah kertas antara lain: sampel A (10% : 30% : 60%), sampel B (20% : 30% : 50%) dan sampel C (30% : 30% : 40%), sedangkan waktu pengeringan yaitu selama 28 hari. Parameter pengujian fisis yang dilakukan yaitu densitas dan penyerapan air. Dari hasil pengujian menunjukkan bahwa batako limbah kertas pada sampel C merupakan hasil yang optimal. Pada komposisi tersebut, batako yang dihasilkan memiliki nilai densitas sebesar 1,055 g/cm3 dan penyerapan air sebesar 21,659 %, sehingga penyerapan air memenuhi persyaratan mutu SNI 03- 0349-1989.Kata kunci : batako, limbah kertas dan pasir
- 26 July 2021
- Published by State University of Medan in JURNAL IKATAN ALUMNI FISIKA
- Vol. 7 (3) , 7-10
Open AccessKARAKTERISTIK SIFAT FISIS BATAKO BERBAHAN LIMBAH KERTAS
Abstrak. Telah dilakukan pembuatan batako konvensional dari bahan limbah kertas. Penelitian ini bertujuan untuk teknik pembuatan dan karakteristik batoko limbah kertas konvensional yang dihasilkan. Variasi komposisi semen : pasir : limbah kertas antara lain: sampel A (10% : 30% : 60%), sampel B (20% : 30% : 50%) dan sampel C (30% : 30% : 40%), sedangkan waktu pengeringan yaitu selama 28 hari. Parameter pengujian fisis yang dilakukan yaitu densitas dan penyerapan air. Dari hasil pengujian menunjukkan bahwa batako limbah kertas pada sampel C merupakan hasil yang optimal. Pada komposisi tersebut, batako yang dihasilkan memiliki nilai densitas sebesar 1,055 g/cm3 dan penyerapan air sebesar 21,659 %, sehingga penyerapan air memenuhi persyaratan mutu SNI 03- 0349-1989.Kata kunci : batako, limbah kertas dan pasir