Wu Duan

Microcatheters capable of active guidance have been proven to be effective and efficient solutions to interventional surgeries for cardiovascular and cerebrovascular diseases. Herein, a novel microcatheter made of two biocompatible materials, shape memory alloy (SMA) and polyethylene (PE), is proposed. It consists of a reconfigurable distal actuator and a separate polyethylene catheter. The distal actuator is created via embedding U-shape SMA wires into the PE base, and its reconfigurability is mainly dominated by the shape memory effect (SME) of SMA wires, as well as the effect of thermal mismatch between the SMA and PE base. A mathematical model was established to predict the distal actuator’s deformation, and the analytical solutions show great agreement with the finite element results. Structural optimization of such microcatheters was carried out using the verified analytical model, followed by fabrication of some typical prototypes. Experimental testing of their mechanical behaviors demonstrates the feasibility of the structural designs, and the reliability and accuracy of the mathematical model. The active microcatheter, together with the prediction model, will lay a solid foundation for rapid development and optimization of active navigation strategies for vascular interventions.

Solar sailing enables efficient propellant-free attitude adjustment and orbital maneuvers of solar sail spacecraft with high area-to-mass ratios. However, the heavy supporting mass for large solar sails inevitably leads to low area-to-mass ratios. Inspired by chip-scale satellites, a chip-scale solar sail system named ChipSail, consisting of microrobotic solar sails and a chip-scale satellite, was proposed in this work. The structural design and reconfigurable mechanisms of an electrothermally driven microrobotic solar sail made of Al\Ni₅₀Ti₅₀ bilayer beams were introduced, and the theoretical model of its electro-thermo-mechanical behaviors was established. The analytical solutions to the out-of-plane deformation of the solar sail structure appeared to be in good agreement with the finite element analysis (FEA) results. A representative prototype of such solar sail structures was fabricated on silicon wafers using surface and bulk microfabrication, followed by an in-situ experiment of its reconfigurable property under controlled electrothermal actuation. The experimental results demonstrated significant electro-thermo-mechanical deformation of such microrobotic bilayer solar sails, showing great potential in the development of the ChipSail system. Analytical solutions to the electro-thermo-mechanical model, as well as the fabrication process and characterization techniques, provided a rapid performance evaluation and optimization of such microrobotic bilayer solar sails for the ChipSail.