Jihong Liao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jihong Liao has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Gaohong Xu
School of Electrical and Information Engineering, Jiangsu University, Zhenjiang, China
4 shared publications - Qian Chen
Jiangsu University
4 shared publications - Guohai Liu
Jiangsu University
3 shared publications - Zhengmeng Liu
Jiangsu University
3 shared publications Congli Mei
College of Electrical Engineering, Zhejiang University of Water Resources and Electric Power, Hangzhou, China
2 shared publications- Hao Shi
Huadian Coal Industry Group Digital Intelligent Technology Company Ltd., Beijing, China
1 shared publication
Latest Publications
- 30 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 61 (3) , 3637-3647
Back EMF Harmonics Suppression of a Rotor Permanent Magnet Flux-Switching Motor Through Air-Gap Harmonic Design
Unlike the stator permanent magnet flux-switching (SPMFS) motor, the sinusoidal degree of the no-load back electromotive force (back EMF) in the rotor permanent magnet flux-switching (RPMFS) motor is not high, which will decrease the utilization rate of the inverter voltage and the torque performances. Hence, this paper proposed a new RPMFS motor according to the principle of the back EMF. On this basis, an optimization design method based on the air-gap harmonics for the RPMFS motor to reduce the total harmonic distortion (THD) of the back EMF. Firstly, based on the flux-modulation theory, the magnetomotive force (MMF)-permeance model is analyzed to investigate the no-load air-gap flux density, contributing to the back EMF, and is obtained by introducing the winding function theory. Then, the minimal main air-gap harmonics to back EMF and the maximum main air-gap harmonic to torque are selected as the optimization objectives to realize the multi-objective optimization design. Finally, an optimal motor prototype was manufactured and tested to verify the feasibility of the proposed motor with low back EMF THD.
- 30 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 61 (3) , 3637-3647
Back EMF Harmonics Suppression of a Rotor Permanent Magnet Flux-Switching Motor Through Air-Gap Harmonic Design
Unlike the stator permanent magnet flux-switching (SPMFS) motor, the sinusoidal degree of the no-load back electromotive force (back EMF) in the rotor permanent magnet flux-switching (RPMFS) motor is not high, which will decrease the utilization rate of the inverter voltage and the torque performances. Hence, this paper proposed a new RPMFS motor according to the principle of the back EMF. On this basis, an optimization design method based on the air-gap harmonics for the RPMFS motor to reduce the total harmonic distortion (THD) of the back EMF. Firstly, based on the flux-modulation theory, the magnetomotive force (MMF)-permeance model is analyzed to investigate the no-load air-gap flux density, contributing to the back EMF, and is obtained by introducing the winding function theory. Then, the minimal main air-gap harmonics to back EMF and the maximum main air-gap harmonic to torque are selected as the optimization objectives to realize the multi-objective optimization design. Finally, an optimal motor prototype was manufactured and tested to verify the feasibility of the proposed motor with low back EMF THD.
- 24 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 11 (2) , 7029-7039
Design and Optimization of Dual-Air Duct Cooling System for Rotor Permanent Magnet Flux-Switching Motor
Rotor permanent magnet flux switching (RPMFS) motors have attracted widespread attention due to high torque density. However, this type of motor will generate significant losses, leading to severe heating. Therefore, this article proposes a dual-air duct cooling system to effectively improve the cooling performance of the RPMFS motor, which fully utilizes the advantages of the rotor hole structure. First, a Clark-y airfoil axial fan is designed using the isolated airfoil and the equal circulation volume method to maximize the airflow velocity. Then, the internal air duct of the RPMFS motor is formed by opening holes in the end cap and the housing, which passes through the rotor hole. Furthermore, the response surface analysis (RSA) method is adopted to optimize the steady-state temperature of the winding, which advantage is reducing the number of the simulation. In addition, the performance of single-air duct and dual-air duct was compared, and it was found that dual-air duct can effectively reduce the steady-state temperature of the motor. Finally, a prototype motor was manufactured and tested to verify the effectiveness and feasibility of the proposed dual-air duct cooling system.
- 24 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 11 (2) , 7029-7039
Design and Optimization of Dual-Air Duct Cooling System for Rotor Permanent Magnet Flux-Switching Motor
Rotor permanent magnet flux switching (RPMFS) motors have attracted widespread attention due to high torque density. However, this type of motor will generate significant losses, leading to severe heating. Therefore, this article proposes a dual-air duct cooling system to effectively improve the cooling performance of the RPMFS motor, which fully utilizes the advantages of the rotor hole structure. First, a Clark-y airfoil axial fan is designed using the isolated airfoil and the equal circulation volume method to maximize the airflow velocity. Then, the internal air duct of the RPMFS motor is formed by opening holes in the end cap and the housing, which passes through the rotor hole. Furthermore, the response surface analysis (RSA) method is adopted to optimize the steady-state temperature of the winding, which advantage is reducing the number of the simulation. In addition, the performance of single-air duct and dual-air duct was compared, and it was found that dual-air duct can effectively reduce the steady-state temperature of the motor. Finally, a prototype motor was manufactured and tested to verify the effectiveness and feasibility of the proposed dual-air duct cooling system.
- 3 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 11 (1) , 2380-2390
Stator Core Loss Suppression of a Rotor Flux-Switching Permanent Magnet Machine by Reconfiguring Rotor Permeance
This paper presents a stator core loss suppression method for a rotor flux-switched permanent magnet (RFSPM) machine by reconfiguring rotor permeance. By analyzing the sources of PM losses and armature losses in the stator, the main rotor permeance harmonics that generate stator core losses are identified. Then, stator core loss is suppressed by reconfiguring the rotor permeance by a specific rotor design, which reduces the main flux densities that generate losses. In addition, the rotor surface shaping design can effectively reduce the torque ripple of the machine. The feasibility of the method was verified by comparing and analyzing the electromagnetic performance of the proposed rotor structure with the original structure. Finally, the reliability of the method is verified by prototype manufacturing and experiments under no-load and load conditions.
- 3 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 11 (1) , 2380-2390
Stator Core Loss Suppression of a Rotor Flux-Switching Permanent Magnet Machine by Reconfiguring Rotor Permeance
This paper presents a stator core loss suppression method for a rotor flux-switched permanent magnet (RFSPM) machine by reconfiguring rotor permeance. By analyzing the sources of PM losses and armature losses in the stator, the main rotor permeance harmonics that generate stator core losses are identified. Then, stator core loss is suppressed by reconfiguring the rotor permeance by a specific rotor design, which reduces the main flux densities that generate losses. In addition, the rotor surface shaping design can effectively reduce the torque ripple of the machine. The feasibility of the method was verified by comparing and analyzing the electromagnetic performance of the proposed rotor structure with the original structure. Finally, the reliability of the method is verified by prototype manufacturing and experiments under no-load and load conditions.
- 7 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (7) , 6775-6786
Design and Analysis of a Novel Hybrid Rotor PM Machine Considering Negative Torque Ripple Contribution
This article proposes a novel hybrid rotor flux-switching permanent magnet (PM) machine with a low torque ripple. The rotor of this machine is composed of inverted T-shaped PMs and surface-mounted PMs and the rotor teeth of the inverted T-shaped PM and the surface-mounted PM are designed with a modified shape. Compared with the conventional inverted T-shaped PM machine, the hybrid PMs arrangement of the proposed machine introduces additional air-gap flux density time–space harmonics based on the flux modulation principle. Especially, these harmonics contribute to negative torque ripples and further counteract the positive torque ripple harmonics to suppress total torque ripples. Furthermore, the feasibility of the proposed machine is verified by comparing and analyzing the electromagnetic and mechanical performances of the conventional machine and the proposed one. Finally, a prototype was fabricated to verify the effectiveness of the proposed machine.
- 7 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (7) , 6775-6786
Design and Analysis of a Novel Hybrid Rotor PM Machine Considering Negative Torque Ripple Contribution
This article proposes a novel hybrid rotor flux-switching permanent magnet (PM) machine with a low torque ripple. The rotor of this machine is composed of inverted T-shaped PMs and surface-mounted PMs and the rotor teeth of the inverted T-shaped PM and the surface-mounted PM are designed with a modified shape. Compared with the conventional inverted T-shaped PM machine, the hybrid PMs arrangement of the proposed machine introduces additional air-gap flux density time–space harmonics based on the flux modulation principle. Especially, these harmonics contribute to negative torque ripples and further counteract the positive torque ripple harmonics to suppress total torque ripples. Furthermore, the feasibility of the proposed machine is verified by comparing and analyzing the electromagnetic and mechanical performances of the conventional machine and the proposed one. Finally, a prototype was fabricated to verify the effectiveness of the proposed machine.