Evgeniy G. Osadchii
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Evgeniy G. Osadchii has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
T. A. Stolyarova
Institute of Experimental Mineralogy, Russian Academy of Sciences, Chernogolovka, Russia
13 shared publications- Mikhail V. Voronin
Russian Academy of Sciences
9 shared publications E. A. Brichkina
Institute of Experimental Mineralogy, Russian Academy of Sciences, Chernogolovka, Russia
7 shared publicationsM. V. Voronin
Korzhinskii Institute of Experimental Mineralogy (IEM), Russian Academy of Sciences, Chernogolovka, Russia
5 shared publications- Veniamin B. Polyakov
Vernadsky Institute of Geochemistry and Analytical Chemistry (GEOKHI), Russian Academy of Sciences, Moscow, Russia
5 shared publications A. V. Baranov
Institute of Experimental Mineralogy, Russian Academy of Sciences
4 shared publications
Latest Publications
- 28 September 2026
- Published by Pleiades Publishing Ltd in Geochemistry International
- Vol. 64 (9) , 750-755
Standard Enthalpy of Cubic Cu2SnSe3 Formation from the Elements: Calorimetric Determination
The reaction of Cu2SnSe3 (high-temperature polymorphic modification of cubic symmetry) synthesis from the elements was studied in a vacuum block calorimeter. The paper presents the results of determination of the standard enthalpy of Cu2SnSe3 formation: \({{\Delta }_{{\text{f}}}}H_{{298.15}}^{0}\)(Cu2SnSe3, cub) = –(244.8 ± 6.9) kJ mol–1.- 28 September 2026
- Published by Pleiades Publishing Ltd in Geochemistry International
- Vol. 64 (9) , 750-755
Standard Enthalpy of Cubic Cu2SnSe3 Formation from the Elements: Calorimetric Determination
The reaction of Cu2SnSe3 (high-temperature polymorphic modification of cubic symmetry) synthesis from the elements was studied in a vacuum block calorimeter. The paper presents the results of determination of the standard enthalpy of Cu2SnSe3 formation: \({{\Delta }_{{\text{f}}}}H_{{298.15}}^{0}\)(Cu2SnSe3, cub) = –(244.8 ± 6.9) kJ mol–1.- 27 December 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 203
Phase formation in the Ag Pd1- – H2 system studied using a solid-state galvanic cell method
- 27 December 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 203
Phase formation in the Ag Pd1- – H2 system studied using a solid-state galvanic cell method
- 4 April 2025
- Published by Springer Nature in Physics and Chemistry of Minerals
- Vol. 52 (2) , 1-8
Mössbauer-derived equilibrium iron isotope fractionation factors for troilite (FeS) and aegirine (NaFeSi2O6)
- 4 April 2025
- Published by Springer Nature in Physics and Chemistry of Minerals
- Vol. 52 (2) , 1-8
Mössbauer-derived equilibrium iron isotope fractionation factors for troilite (FeS) and aegirine (NaFeSi2O6)
- 1 February 2025
- Published by Pleiades Publishing Ltd in Geochemistry International
- Vol. 63 (2) , 183-189
Standard Thermodynamic Properties of Ag3Sn (Shosanbetsuite): EMF Data
Thermodynamic properties of shosanbetsuite (Ag3Sn) are first determined in the Ag–Sn system in a galvanic cell (–) Pt|Gr|Ag|RbAg4I5|Ag3Sn, Sn|Gr|Pt (+) within the temperature range of 327–427 K in vacuum. Analysis of the data makes it possible to calculate the standard (298.15 K, 105 Pa) ΔfG°, ΔfH°, and S° of Ag3Sn: –21238, –18763 J mol–1, and 187.5 J K–1 mol–1, respectively.
- 1 February 2025
- Published by Pleiades Publishing Ltd in Geochemistry International
- Vol. 63 (2) , 183-189
Standard Thermodynamic Properties of Ag3Sn (Shosanbetsuite): EMF Data
Thermodynamic properties of shosanbetsuite (Ag3Sn) are first determined in the Ag–Sn system in a galvanic cell (–) Pt|Gr|Ag|RbAg4I5|Ag3Sn, Sn|Gr|Pt (+) within the temperature range of 327–427 K in vacuum. Analysis of the data makes it possible to calculate the standard (298.15 K, 105 Pa) ΔfG°, ΔfH°, and S° of Ag3Sn: –21238, –18763 J mol–1, and 187.5 J K–1 mol–1, respectively.
- 1 July 2024
- Published by Pleiades Publishing Ltd in Inorganic Materials
- Vol. 60 (7) , 832-837
Thermodynamic Properties of RuTe2 Evaluated by EMF Measurements on a Solid State Electrochemical Cell
The thermodynamic properties of RuTe2 have been determined for the first time using electromotive force (emf) measurements in the Ag–Ru–Te system. The thermodynamic properties have been evaluated from the temperature dependence of the emf measured on an all-solid electrochemical cell with a common gas space, corresponding to the virtual chemical reaction 4Ag + RuTe2 = 2Ag2Te + Ru. The measurements have been performed in the temperature range 747–884 K. As a result, the following standard thermodynamic properties of formation of RuTe2 from its constituent elements at 298.15 K and 1 bar (105 Pa) are recommended: ΔfG° = –126.9 kJ/mol, S° = 94.94 J/(mol K), and ΔfH° = –136.6 kJ/mol. The thermodynamic properties of RuTe2 are compared to literature data for compounds isostructural with it: ruthenium disulfide and ruthenium diselenide.
- 1 July 2024
- Published by Pleiades Publishing Ltd in Inorganic Materials
- Vol. 60 (7) , 832-837
Thermodynamic Properties of RuTe2 Evaluated by EMF Measurements on a Solid State Electrochemical Cell
The thermodynamic properties of RuTe2 have been determined for the first time using electromotive force (emf) measurements in the Ag–Ru–Te system. The thermodynamic properties have been evaluated from the temperature dependence of the emf measured on an all-solid electrochemical cell with a common gas space, corresponding to the virtual chemical reaction 4Ag + RuTe2 = 2Ag2Te + Ru. The measurements have been performed in the temperature range 747–884 K. As a result, the following standard thermodynamic properties of formation of RuTe2 from its constituent elements at 298.15 K and 1 bar (105 Pa) are recommended: ΔfG° = –126.9 kJ/mol, S° = 94.94 J/(mol K), and ΔfH° = –136.6 kJ/mol. The thermodynamic properties of RuTe2 are compared to literature data for compounds isostructural with it: ruthenium disulfide and ruthenium diselenide.
- 25 March 2022
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 909
Heat capacity and thermodynamic properties of PbS: Optimization based on calorimetric and electrochemical data
- 25 March 2022
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 909
Heat capacity and thermodynamic properties of PbS: Optimization based on calorimetric and electrochemical data
- 1 February 2021
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 855
Synthesis, X-ray data, and thermodynamic properties of the AgTe3 high-pressure phase in the Ag–Te system
- 1 February 2021
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 855
Synthesis, X-ray data, and thermodynamic properties of the AgTe3 high-pressure phase in the Ag–Te system
- 1 May 2020
- Published by Pleiades Publishing Ltd in Russian Journal of Inorganic Chemistry
- Vol. 65 (5) , 636-639
Standard Enthalpy of Cu2SnS3 (Mohite) Formation from Sulfides
Copper tin sulfide Cu2SnS3 (mohite) is the endmember of the binary system Cu2SnS3–MeIIS, in which a number of four-component compounds (known as stannic minerals) are formed; it is also a representative of a large number of solid solutions, some occurring in nature and used in metallurgy and as promising materials for the production of solar cells. The standard enthalpy of mohite formation from covelline (CuS) and herzenbergite (SnS) has been determined: 2CuS + SnS → Cu2SnS3, \({{\Delta }_{r}}H_{{{\text{298}}.{\text{15}}\,\,{\text{K}}}}^{^\circ }\)(Cu2SnS3) = ‒(51.01 ± 1.26) kJ/mol. The standard enthalpy of Cu2SnS3 formation from elements kJ/mol has been calculated using reference data: \({{\Delta }_{f}}H_{{{\text{298}}.{\text{15}}\,\,{\text{K}}}}^{^\circ }\)(Cu2SnS3) = –(263.79 ± 2.28).- 1 May 2020
- Published by Pleiades Publishing Ltd in Russian Journal of Inorganic Chemistry
- Vol. 65 (5) , 636-639
Standard Enthalpy of Cu2SnS3 (Mohite) Formation from Sulfides
Copper tin sulfide Cu2SnS3 (mohite) is the endmember of the binary system Cu2SnS3–MeIIS, in which a number of four-component compounds (known as stannic minerals) are formed; it is also a representative of a large number of solid solutions, some occurring in nature and used in metallurgy and as promising materials for the production of solar cells. The standard enthalpy of mohite formation from covelline (CuS) and herzenbergite (SnS) has been determined: 2CuS + SnS → Cu2SnS3, \({{\Delta }_{r}}H_{{{\text{298}}.{\text{15}}\,\,{\text{K}}}}^{^\circ }\)(Cu2SnS3) = ‒(51.01 ± 1.26) kJ/mol. The standard enthalpy of Cu2SnS3 formation from elements kJ/mol has been calculated using reference data: \({{\Delta }_{f}}H_{{{\text{298}}.{\text{15}}\,\,{\text{K}}}}^{^\circ }\)(Cu2SnS3) = –(263.79 ± 2.28).- 19 November 2019
- Published by The Russian Academy of Sciences in Geohimiâ
- Vol. 64 (10) , 1105-1108
Standard enthalpy of formation of selenium stannite Cu2FeSnSe4
The calorimetric determination of the standard enthalpy of formation of Cu2FeSnSe4 selenium stannite (CITSe) was carried out for the first time. This compound in its pure form does not occur in nature, but is a promising functional material (direct-gap semiconductor) and is used in photovoltaics to create solar cells as an alternative to silicon. The standard enthalpy of Cu2FeSnSe4 formation was obtained by measuring the heat of its formation from the elements in the calorimeter according to the reaction 2Cu + Fe + Sn + 4Se Cu2FeSnSe4. As a result, the standard enthalpy of formation is detrmined: ∆fH0298.15K(Cu2FeSnSe4) = (254.11 3.96) kJ/mol.
- 19 November 2019
- Published by The Russian Academy of Sciences in Geohimiâ
- Vol. 64 (10) , 1105-1108
Standard enthalpy of formation of selenium stannite Cu2FeSnSe4
The calorimetric determination of the standard enthalpy of formation of Cu2FeSnSe4 selenium stannite (CITSe) was carried out for the first time. This compound in its pure form does not occur in nature, but is a promising functional material (direct-gap semiconductor) and is used in photovoltaics to create solar cells as an alternative to silicon. The standard enthalpy of Cu2FeSnSe4 formation was obtained by measuring the heat of its formation from the elements in the calorimeter according to the reaction 2Cu + Fe + Sn + 4Se Cu2FeSnSe4. As a result, the standard enthalpy of formation is detrmined: ∆fH0298.15K(Cu2FeSnSe4) = (254.11 3.96) kJ/mol.