ZWZehao Wang

Zehao Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zehao Wang has a total of 63 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Agentic AI for Scalable and Robust Optical Systems Control

    by Zehao Wang, Mingzhe Han, Wei Cheng, Yue-Kai Huang, Philip N. Ji, Denton Wu, Mahdi Safari, Flemming Holtorf, Kenaish Alqubaisi, Danyang Zhuo, et al.

  • Scalable ML models and cascaded learning for efficient multi-span OSNR and GSNR prediction

    by Zehao Wang, Andrea D’AMico, Giacomo Borraccini, Agastya Raj, Yue-Kai Huang, Shaobo Han, Ting Wang, Marco Ruffini, Daniel Kilper, Tingjun Chen

    Scalable and efficient methods for predicting optical transmission performance using machine learning (ML) and cascaded learning (CL) are investigated in metro multi-span optical networks. We extend the CL framework beyond multi-span power spectrum prediction to enable accurate estimation of optical signal-to-noise (OSNR) and generalized signal-to-noise (GSNR) under dynamic channel loading, integrating cascaded component models for end-to-end (E2E) optical link performance prediction. To mitigate error accumulation inherent in cascaded predictions, additional E2E optical link measurements and models are incorporated. To ensure scalability, component-level models for erbium-doped fiber amplifier (EDFA) gain and noise figure are pre-trained prior to deployment. We demonstrate that the data collection effort for pre-training the EDFA model can be reduced to only 5.5% of the original training set through transfer learning. Furthermore, Gaussian noise (GN)-based analytical models are leveraged to assist in the training of ML-based models for fiber loss and nonlinear impairments. The proposed approach is evaluated under four distinct optical link configurations. On a five-span system comprising six EDFAs, the method achieves a mean absolute error of 0.22 and 0.13 dB for OSNR prediction of background channels and GSNR prediction for 400 GbE channels, respectively.


  • Open Access

    Optical Link Tomography: First Field Trial and 4D Extension

    by Takeo Sasai, Giacomo Borraccini, Yue-Kai Huang, Hideki Nishizawa, Zehao Wang, Tingjun Chen, Yoshiaki Sone, Minami Takahashi, Tatsuya Matsumura, Masanori Nakamura, et al.

    Optical link tomography (OLT) is a rapidly evolving field that allows the multi-span, end-to-end visualization of optical power along fiber links in multiple dimensions from network endpoints, solely by processing signals received at coherent receivers. This paper has two objectives: (1) to report the first field trial of OLT, using a commercial transponder under standard DWDM transmission, and (2) to extend its capability to visualize across 4D (distance, time, frequency, and polarization), allowing for locating and measuring multiple QoT degradation causes, including time-varying power anomalies, spectral anomalies, and excessive polarization dependent loss. We also address a critical aspect of OLT, i.e., its need for high fiber launch power, by improving power profile signal-to-noise ratio through averaging across all available dimensions. Consequently, multiple loss anomalies in a field-deployed link are observed even at launch power lower than the system-optimal level. The applications and use cases of OLT from network commissioning to provisioning and operation for current and near-term network scenarios are also discussed.


  • Generalized few-shot transfer learning architecture for modeling the EDFA gain spectrum

    by Agastya Raj, Zehao Wang, Tingjun Chen, Daniel C. Kilper, Marco Ruffini

    Accurate modeling of the gain spectrum in erbium-doped fiber amplifiers (EDFAs) is essential for optimizing optical network performance, particularly as networks evolve toward multi-vendor solutions. In this work, we propose a generalized few-shot transfer learning architecture based on a semi-supervised self-normalizing neural network (SS-NN) that leverages internal EDFA features—such as VOA input/output power and attenuation—to improve gain spectrum prediction. Our SS-NN model employs a two-phase training strategy comprising unsupervised pre-training with noise-augmented measurements and supervised fine-tuning with a custom-weighted MSE loss. Furthermore, we extend the framework with transfer learning (TL) techniques that enable both homogeneous (same-feature space) and heterogeneous (different-feature sets) model adaptation across booster, pre-amplifier, and ILA EDFAs. To address feature mismatches in heterogeneous TL, we incorporate a covariance matching loss to align second-order feature statistics between the source and target domains. Extensive experiments conducted across 26 EDFAs in the COSMOS and Open Ireland testbeds demonstrate that the proposed approach significantly reduces the number of measurement requirements on the system while achieving lower mean absolute errors and improved error distributions compared to benchmark methods.


  • Multi-span optical power spectrum prediction using cascaded learning with one-shot end-to-end measurement

    by Zehao Wang, Yue-Kai Huang, Shaobo Han, Daniel Kilper, Tingjun Chen

    Scalable methods for optical transmission performance prediction using machine learning (ML) are studied in metro reconfigurable optical add-drop multiplexer (ROADM) networks. A cascaded learning framework is introduced to encompass the use of cascaded component models for end-to-end (E2E) optical path prediction augmented with different combinations of E2E performance data and models. Additional E2E optical path data and models are used to reduce the prediction error accumulation in the cascade. Off-line training (pre-trained prior to deployment) and transfer learning are used for component-level erbium-doped fiber amplifier (EDFA) gain models to ensure scalability. Considering channel power prediction, we show that the data collection process of the pre-trained EDFA model can be reduced to only 5% of the original training set using transfer learning. We evaluate the proposed method under three different topologies with field deployed fibers and achieve a mean absolute error of 0.16 dB with a single (one-shot) E2E measurement on the deployed 6-span system with 12 EDFAs.


  • Semi-automatic line-system provisioning with an integrated physical-parameter-aware methodology: field verification and operational feasibility

    by Hideki Nishizawa, Giacomo Borraccini, Takeo Sasai, Yue-Kai Huang, Toru Mano, Kazuya Anazawa, Masatoshi Namiki, Soichiroh Usui, Tatsuya Matsumura, Yoshiaki Sone, et al.

    We propose methods and an architecture to conduct measurements and optimize newly installed optical fiber line systems semi-automatically using integrated physics-aware technologies in a data center interconnection (DCI) transmission scenario. We demonstrate, for the first time to our knowledge, digital longitudinal monitoring (DLM) and optical line system (OLS) physical parameter calibration working together in real-time to extract physical link parameters for fast optical fiber line systems provisioning. Our methodology has the following advantages over traditional design: a minimized footprint at user sites, accurate estimation of the necessary optical network characteristics via complementary telemetry technologies, and the capability to conduct all operation work remotely. The last feature is crucial, as it enables remote operation to implement network design settings for immediate response to quality of transmission (QoT) degradation and reversion in the case of unforeseen problems. We successfully performed semi-automatic line system provisioning over field fiber network facilities at Duke University, Durham, North Carolina. The tasks of parameter retrieval, equipment setting optimization, and system setup/provisioning were completed within 1 h. The field operation was supervised by on-duty personnel who could access the system remotely from different time zones. By comparing Q-factor estimates calculated from the extracted link parameters with measured results from 400G transceivers, we confirmed that our methodology has a reduction in the QoT prediction errors ( ±0.3dB ) over existing designs ( ±0.6dB ).


  • Open Access

    Fast WDM provisioning with minimal probing: the first field experiments for DC exchanges

    by Hideki Nishizawa, Toru Mano, Thomas Ferreira de Lima, Yue-Kai Huang, Zehao Wang, Wataru Ishida, Masahisa Kawashima, Ezra Ip, Andrea D’aMico, Seiji Okamoto, et al.

    There are increasing requirements for data center interconnection (DCI) services, which use fiber to connect any DC distributed in a metro area and quickly establish high-capacity optical paths between cloud services and mobile edge computing and the users. In such networks, coherent transceivers with various optical frequency ranges, modulators, and modulation formats installed at each connection point must be used to meet service requirements such as fast-varying traffic requests between user computing resources. This requires technology and architectures that enable users and DCI operators to cooperate to achieve fast provisioning of WDM links and flexible route switching in a short time, independent of the transceiver’s implementation and characteristics. We propose an approach to estimate the end-to-end (EtE) generalized signal-to-noise ratio (GSNR) accurately in a short time, not by measuring the GSNR at the operational route and wavelength for the EtE optical path but by simply applying a quality of transmission probe channel link by link, at a wavelength/modulation-format convenient for measurement. Assuming connections between transceivers of various frequency ranges, modulators, and modulation formats, we propose a device software architecture in which the DCI operator optimizes the transmission mode between user transceivers with high accuracy using only common parameters such as the bit error rate. In this paper, we first implement software libraries for fast WDM provisioning and experimentally build different routes to verify the accuracy of this approach. For the operational EtE GSNR measurements, the accuracy estimated from the sum of the measurements for each link was 0.6 dB, and the wavelength-dependent error was about 0.2 dB. Then, using field fibers deployed in the NSF COSMOS testbed, a Linux-based transmission device software architecture, and transceivers with different optical frequency ranges, modulators, and modulation formats, the fast WDM provisioning of an optical path was completed within 6 min.


  • Field Trial of Coexistence and Simultaneous Switching of Real-Time Fiber Sensing and Coherent 400 GbE in a Dense Urban Environment

    by Zehao Wang, Yue-Kai Huang, Ezra Ip, Zhenzhou Qi, Gil Zussman, Dan Kilper, Koji Asahi, Hideo Kageshima, Yoshiaki Aono, Tingjun Chen

    Recent advances in optical fiber sensing have enabled telecom network operators to monitor their fiber infrastructure while generating new revenue in various application scenarios including data center interconnect, public safety, smart cities, and seismic monitoring. However, given the high utilization of fiber networks for data transmission, it is undesirable to allocate dedicated fiber strands solely for sensing purposes. Therefore, it is crucial to ensure the reliable coexistence of fiber sensing and communication signals that co-propagate on the same fiber. In this paper, we conduct field trials in a reconfigurable optical add-drop multiplexer (ROADM) network enabled by the PAWR COSMOS testbed, utilizing metro area fibers in Manhattan, New York City. We verify the coexistence of real-time constant-amplitude distributed acoustic sensing (DAS), coherent 400 GbE, and analog radio-over-fiber (ARoF) signals. Measurement results obtained from the field trial demonstrate that the quality of transmission (QoT) of the coherent 400 GbE signal remains unaffected during co-propagation with DAS and ARoF signals in adjacent dense wavelength-division multiplexing (DWDM) channels. In addition, we present a use case of this coexistence system supporting preemptive DAS-informed optical path switching before link failure.


  • Open EDFA gain spectrum dataset and its applications in data-driven EDFA gain modeling

    by Zehao Wang, Daniel C. Kilper, Tingjun Chen

    Optical networks satisfy high bandwidth and low latency requirements for telecommunication networks and data center interconnection. To improve network resource utilization, machine learning (ML) is used to accurately model optical amplifiers such as erbium-doped fiber amplifiers (EDFAs), which impact end-to-end system performance such as quality of transmission. However, a comprehensive measurement dataset is required for ML to accurately predict an EDFA’s wavelength-dependent gain. We present an open dataset consisting of 202,752 gain spectrum measurements collected from 16 commercial-grade reconfigurable optical add–drop multiplexer (ROADM) booster and pre-amplifier EDFAs under varying gain settings and diverse channel-loading configurations over 2,785 hours in total, with a total dataset size of 3.1 GB. With this EDFA dataset, we implemented component-level deep-neural-network-based EDFA models and use transfer learning (TL) to transfer the EDFA model among 16 ROADM EDFAs, which achieve less than 0.18/0.24 dB mean absolute error for booster/pre-amplifier gain prediction using only 0.5% of the full target training set. We also showed that TL reduces the EDFA data collection requirements on a new gain setting or a different type of EDFA on the same ROADM.


  • Open Access

    Distributionally Robust Stochastic Optimal Power Flow Considering N-1 Security Constraints with renewable

    by Shiyuan Ni, Guilian Wu, Zehao Wang, Yi Lin, Defei Yao, Ruosi Zhang

    This paper proposes a data-driven stochastic optimal power flow model considering the uncertainties of renewable energy sources. The proposed model also focuses on the constraints of reactive voltage, aiming at improving the safety of voltage amplitude and reactive power output at each bus. Using data-driven linearization techniques, we simplified the calculation of system. In addition, Wasserstein ambiguity set was used to describe the uncertainties of renewable energy prediction error distribution, and a robust stochastic optimal power flow model considering N-1 security constraints is established. The simulation results on IEEE-39 system showed the accuracy and effectiveness of the distributionally robust optimization model and the reactive voltage constraint model provided a more stable operation schedule.